Error: The user profile Service service didn't he logon. User profile cannot be laoded.

Similar Questions

• Error message "User profile Service is a not the user of the connection profile cannot be loaded" when you try to connect using the Administrator profile

  Original title: cannot use my administrator profile

  When loging on my laptop, I get this error when I click on my profile administrator "user profile Service is not the user of the connection profile cannot be loaded. This comes after the password is accepted. The only way I can connect to my computer is one of my accounts of comments. I can't change anything because I can't sign as an administrator. How can I fix? I have a Compacq laptop running Windows Vista

  Original title: cannot use my administrator profile

  When loging on my laptop, I get this error when I click on my profile administrator "user profile Service is not the user of the connection profile cannot be loaded. This comes after the password is accepted. The only way I can connect to my computer is one of my accounts of comments. I can't change anything because I can't sign as an administrator. How can I fix? I have a Compacq laptop running Windows Vista

  If you cannot connect to your admin account, no tutorials can help you because they need you to connect to an administrator account to carry out the instructions.

  See if the following can get an admin account...

  Go to Safe Mode...

  Restart your computer > immediately and repeatedly pressing the F8 key until you see a black and white screen. The top/down arrow and select Mode safe mode with networking.

  Now, while in safe mode, you perform one of the following?

  1 can connect to your account admin without the error message?
  If so, do. Then do a system restore. Choose a date when you were free to login to your account admin as your restore point.

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

  If the system restore does not slove the problem, then use this tutorial

  http://support.Microsoft.com/kb/947215

  2. If you are unable to log in to your account administrator in safe mode, you see another administrator next to your account?
  If so, you are lucky. This is the built-in Administrator account.
  There is, by default, no password.
  It could connect and do the system restore.

  If the system restore is not enough, then perform the tutorial even as above:
  http://support.Microsoft.com/kb/947215

  If you can't do or of what precedes, I'm afraid you will have to re - install your Vista.

• Error "the user profile Service has no logon. Unable to load the user profile.

  Original title: admin user account

  the user profile service service is a not the logon user profile cannot be loaded, this is the error I received - it's my account Admin what should I do to correct this. I have come back before this happened. Help, please

  Hello

  You can try to fix it with Safe Mode - repeatedly press F8 as you bootup. The ADMIN account in trunk
  Mode has no default password (unless someone has changed the password so it should be available).

  Some programs such as the updated Google (if you added the toolbar Google, Chrome or Google Earth)
  has been known to cause this problem.

  Error message when you log on a Windows Vista-based or Windows 7 using computer a
  Temporary profile: "the user profile Service has no logon. Unable to load the user profile.
  http://support.Microsoft.com/kb/947215

  How to fix error "the user profile Service has no logon. User profile cannot be loaded. »
  http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.html

  How to fix error "your user profile was not loaded correctly! You have been connected with a
  temporary profile. "in Vista
  http://www.Vistax64.com/tutorials/135858-user-profile-error-logged-temporary-profile.html

  BE VERY CAREFUL IF YOU USE THIS ONE:

  DO NOT USE THE ACCOUNT HIDDEN ON A DAILY BASIS! If it corrupts you are TOAST.

  How to enable or disable the real built-in Administrator account in Vista
  http://www.Vistax64.com/tutorials/67567-administrator-account.html

  Use the Admin account hidden to lower your user account APPLY / OK then wear again to
  ADMIN. This allows clear of corruption. Do the same for other accounts if necessary after the
  above message.

  You can use the hidden - administrator account to make another account as an ADMINISTRATOR with your same
  password (or two with the same password) use a test or difficulty to another.

  You can run the Admin account hidden from the prompt by if necessary.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  If you cannot access your old account, you can still use an Admin to migrate to another (don't forget
  always leave to an Admin who is not used except for testing and difficulty account).

  Difficulty of a corrupted user profile
  http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspx

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• What opening of database Service of Cloud Computing console receiveing "the user role cannot access the Cloud database Service" message and see no service. Why?

  What opening of database Service of Cloud Computing console receiveing "the user role cannot access the Cloud database Service" message and see no service. Why?

  Thank you in advance.

  Try now

• the API call error: error: the user has sufficient privileges to perform this API call.

  Hello

  I'm exploring cloudClient 3.4.1 but I'm trying to run a "vra catalog list" command or other similar commands I get the error "error: the user has sufficient privileges to perform this API call."

  I don't know what are the permissions of system requirements before I can make the API call because the account which I use to make these calls already have privileges to Administrator local on box of IAAS & is admin Admin/tenant IAAS. In short, the user is a full administrator of the tool.

  Please help me because I found there is a documentation for the usability of the cloudclient.

  Thank you

  MG

  Is the account of your help to make the law of all items in the catalog API call? We have users from the normal group of activities that use the API does not have system or administrator access.

• "ERROR: the user name you have chosen already exists."

  When someone registers on my registration form (http://puremediccom.worldsecuresystems.com/puremedic-guru-register) with a user name that already exists, the form is sent, but in the notification of workwlow I see behing username "ERROR: the user name you have chosen already exists." When you try to connect to the site it does not indeed.

  Is the best way around this to request an address of email as a username? Or is it possible to run the validation on the existing user name?

  See you soon

  Jerun

  Hi Jerun,

  I think that the workaround in this case, so need email address to match the username is to use some JS.

  Please note the custom scripts is off of BC, but here is an example that may help.

  http://KB.worldsecuresystems.com/598/bc_598.html#main_Set_the_value_of_the_username_field _ equal_to_the_email_address_field

  Kind regards

  -Sidney

• Password just changed an hour ago. I can not connect. Error: "the user profile Service has no logon. Unable to load the user profile.

  Original title: just changed password an hour ago. I can not connect.

  Password just changed an hour ago. I can not connect. I don't have a password reset disk. When I type the password and press ENTER, the next page says ' THE SERVICE PROFILE has NO logon USER. USER PROFILE CANNOT BE LOADED. »

  Hello
   
   
  This error can occur if the group policy setting "do not connect to users with temporary profiles" is configured.
  
  Try to connect to your computer from another user account and follow the steps listed in the article below.
  Check out the following link and follow the steps to solve the problem:
  Error message when you log a computer Windows Vista-based or Windows 7 by using a temporary profile: "the user profile Service has no logon. Unable to load the user profile.
  http://support.Microsoft.com/kb/947215
   
  Note: If you do not have any other user account the computer checks to see if you can boot to the desktop insafe mode , and then perform the steps listed.
   
   
  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• User cannot connect again PC Windows 7, error "the user profile service has no logon. User profile cannot be loaded.

  Our plant manager just got a new PC and I've set up with Windows 7.  I can log on fine using my user account.  But when it tries to connect, it receives the "the user profile service has no logon. Error could not load the user profile.  It can connect to other computers fine, Windows XP & Windows 7 computers.  It's just that a laptop could not connect to.

  It was a VIP user.  He's my boss of bosses bosses if you know what I mean.  What I can do.  I tried "patches" for the mistake that I found online, but none of them helped.
  Help me!  Please, I beg you!

  I did other tests just now and I seemed to have found a "solution".  Here are the steps:

  1 Add the user to the local Administrators group
  2 log in as a user
  3. close the user session
  4 log in as network administrator / local
  5 remove the user from the Administrators group
  6 log in as user
  7. the success!
  Still do not understand what was going on the devil, but at least I know the work around her now!

• Error - "the user profile service has no logon.

  Original title - login

  When I try to log in. I get the message. The user profile service service has no logon. How can I fix it?

  Hi DonPatton

   

  1. what operating system is installed on the computer?

  2. for how long have you been faced with this problem?

   

  If you are using Windows Vista or 7 operating system installed on the computer, then you can refer to the link below and check if the steps provided assist solve you the problem-

  http://support.Microsoft.com/kb/947215

   

  I hope this helps.

• Unable to connect to my laptop computer error "the user profile service has no logon. User profile cannot be loaded. "

  Original title: unable to connect to my laptop

  I tried to connect my laptop this morning and received this message "the user profile service has no logon. User profile cannot be loaded. Currently, I run in safe mode to get here. My os is windows 8, I have no restore point for system restore was released. I changed the password but when not even a joy also came not preinstalled os so no disc to any kind either. I'm no computer whizz but I don't have a little and follow instructions if any of you guys have any suggestions

  http://www.eightforums.com/user-accounts-family-safety/6084-any-fixes-user-profile-can-t-loaded-Windows-8-a.html

  The manufacturer of the system should give you a method to restore the system to factory settings as well.  Maybe the press of a button to start, or you were supposed to make the media or something similar.  Call NOW and ask if you can get a CD/DVD restore media.  Get, even if it costs a bit.  Better to get it so that you don't need that when you do.

  Windows 8/8.1 also restore, refresh and restore capabilities.  It's good for some things, but methods of restoration/recovery of the manufacturer are the best long term for several reasons.

• THE USER PROFILE SERVICE service failed the logon__User profile cannot be loaded

  I read the previous discussions, so what I need is someone who has the patience and the time to walk through Windows 7 Home Premium for Dummies with me.  I have a friend who has updated all my software on Windows 7 and has added many other applications for a handsome sum.  A FRIEND.  I was on my labtop there is only 1 hour returned to connect and I get this message to the CONNECTION SCREEN...

  THE USER PROFILE SERVICE service has no logon.
  User profile cannot be loaded

  I'm on the front screen.  No office, NO option to use a different connection name, no Director... Just my name and my password.  My Blue tutorial button to the left and my red farm option to the right.  I can't do all the things I've read on because I can't get the properties... blah blah.  I know that I delete anything... I could not... I don't know how.  I just need help, restore peace of mind only I get from a busy daily life.

  Peuvent some please help?

  Hello

  This also happened to me in another case. All local users are unable to connect they get this error. For example if I enable comments or create a local user account that is a member of the 'users' group I get this error when you connect using the accounts of the said that has been set with a blank password. However, I was able to use my administrator account to manage my machine. You probabbly deleted your permissions on the "C:\Users" folder or the root of the drive itself. If you have a local account, you can plug this hard drive into a computer with the same OS as slave then add "everyone" group with full control and select inherit permissions from parent. Restart, and then try. I hope this helps. C =

  -Julius P.

  MCP, MCDST

• Error "the Windows Installer Service could not be accessed. This can occur if you are running Windows in safe mode or if Windows Installer is not installed properly. »

  Crazy became Windows Installer

  have windows Xp Sp 3 and when I want to uninstall or install a program error message appears saying that "the Windows Installer Service could not be accessed. This can occur if you run Windows in Mode safe mode or if Windows Installer is not installed properly. Contact your support team. "and I are not in safe mode when I try to install or uninstall programs.  I checked for a virus and found that none please help because I want to uninstall some programs to free up disk space.

  Original title: Windows Installer Service could not be accessed error during installation or uninstall a program

  Hi, Honorine,.

  Follow the steps listed in the following article:

  Error message when you try to add or remove a program on a computer that is running Windows XP or Windows Server 2003: "the Windows Installer service is not to be accessible.

  See also:

  Problems installing and uninstalling programs on Windows computers

• Error "the print spooler service does not work.

  print spooler - HELP

  my printer disappeared and when I tried to reinstall a message appears that the print spooler service is not runnin - HELP

  Hi masubb1,

  ·         You did changes to the computer before the show?

  You can try the following solutions.

  Method 1: Run the next Fixit tool and see if it helps.

  Problems printing and printing errors

  Method 2: Follow this guide step by step to solve the problem.

  Printer in Windows problems

• Windows is not activated error "The Software Licensing Service reported that the license evaluation failed with error 0xC004E003"

  OT: Windows is not activated

  PC Specs: -.

  Windows 7 ultimate 64 bit

  Intel 3rd gen i3 - 240 GHZ x 4

  Intel HD graphics card.

  Hello

  I have a very serious problem with my laptop. First of all, my laptop's HARD drive crashed, I bought a new one, then I installed ubuntu 14, as I have the installation disc, & then I downloaded Windows 7 one day before yesterday & then I installed on yesterday afternoon. Everything was fine, that the installation was successful

  USB drive but most shocking is error: invalid product key, when I entered and tried to activate it again once I've upgraded to windows 7 & part empty left product key & then I connected to internet & entered the product by typing key just today to activate in the search from the start menu & got the following error :

  --------------------------
  Error details
  ---------------------------
  The following information was found for this error:

  Code:

  0xC004E003

  Description:

  The Software Licensing Service reported that license evaluation failed.

  ---------------------------
  Ok
  ---------------------------

  When I received this laptop as a gift from my family, it has Windows 7 Home premium preinstalled, so I updated windows on my laptop to ultimate edition using Windows Anytime upgrade using the same product key that I use today to activate my Windows. Any body here has any fix on how to activate Windows?

  Thanks in advance.

  The key you are using is a key Acer OEM SLIC (installed at the factory of Acer) and you have an HP computer.

  SYSTEM >Hewlett-Packardlaptop HP G72

  Your key will not work to install Windows 7 Ultimate or use the Express Upgrade option.

  J W Stuart: http://www.pagestart.com

• Error: the user profile cannot be loaded

  In Windows 7 Professional, 64-bit, what can be done to resolve the error "Unable to load the user profile" - I get when I click on the icon for one of the accounts on startup.  Other (non-administrator) accounts on the same computer work fine.

  Thank you for your help.

  Ed

  Take a look at:

  http://support.Microsoft.com/kb/947215/en-us