Error: the user profile cannot be loaded
In Windows 7 Professional, 64-bit, what can be done to resolve the error "Unable to load the user profile" - I get when I click on the icon for one of the accounts on startup. Other (non-administrator) accounts on the same computer work fine.
Thank you for your help.
Ed
Take a look at:
http://support.Microsoft.com/kb/947215/en-us
Tags: Windows
Similar Questions
-
the user profile service service has no logon and the user profile cannot be loaded. IAM not able to switch on the laptop. How to solve this problem?
My laptop is Sony's new Vaio. Windows7. 4 GB of ram and 2.1 billion hertz processor with dual-coreHi ravichandrans36,
Thank you for using Microsoft Windows forum.
This error can occur if the group policy setting "do not connect to users with temporary profiles" is configured.
To resolve this issue, follow these steps:
1 delete the profile by using the computer properties dialog box. To do this, follow these steps:
a. Click Start, right-click computer and then click Properties.
b. click on change settings.
c. in the System Properties dialog box, click the Advanced tab.
d. under user profiles, click settings.
e. in the user profiles dialog box, select the profile you want to delete, click on remove and then click OK.
2. Click Start, type regedit in the start search box and then press ENTER.3. Locate, and then expand the following registry subkey:
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\ProfileList4 right-click the SID that you want to delete and then click on remove.
5 log on to the computer and create a new profile.
For more information, see: http://support.microsoft.com/kb/947215
EDITING REGISTRY WARNING:
Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
How to back up and restore the registry in Windows: http://support.microsoft.com/kb/322756Kind regards
Aziz Nadeem - Microsoft Support -
I can not connect and it says failed to connect to the profile.
Hello
1st thing to try is the system in safe mode restore to before the problem
http://www.windowsvistauserguide.com/system_restore.htm
Windows Vista
Using the F8 method:
- Restart your computer.
- When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
- Select the Safe Mode option with the arrow keys.
- Then press enter on your keyboard to start mode without failure of Vista.
- To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
- Do whatever tasks you need and when you are done, reboot to return to normal mode.
If that does not solve it read more
read the tutorial below
When you log on a Windows Vista-based or a Windows 7 computer by using a temporary profile, you receive the following error message:
The user profile Service has not logon. User profile cannot be loaded.http://support.Microsoft.com/kb/947215#letmefixit
Your user profile was not loaded correctly! You have been logged on with a temporary profile.
http://support.Microsoft.com/kb/947242
If you tried to log on to Windows and received an error message telling you that your user profile is damaged, you can try to fix it. You will need to create a new profile and then copy the files from the existing to the new profile. You must have at least three user accounts on the computer to perform these operations, including the new account that you created.
http://Windows.Microsoft.com/en-us/Windows-Vista/fix-a-corrupted-user-profile
-
I can not connect to. Software Microsoft gets Ths user profile Service Service has no connection user profile cannot be loaded.
Hello
References to Vista also apply to Windows 7.
You can try to fix it with Safe Mode - repeatedly press F8 as you bootup. Safe Mode ADMINISTRATOR account has no password by default (unless someone has changed the password so it should be available).
Some programs such as the Google Updater (if you added the toolbar Google, Chrome or Google Earth) has been known to cause this problem.
Error message when you log a computer Windows Vista-based or Windows 7 by using a temporary profile: "the user profile Service has no logon. Unable to load the user profile.
http://support.Microsoft.com/kb/947215Difficulty "the user profile Service has no logon. User profile cannot be loaded. "Error in Windows 7
http://www.SevenForums.com/tutorials/186131-user-profile-service-failed-logon-user-profile-cannot-loaded.htmlHow to fix error "your user profile was not loaded correctly! You have logged on with a temporary profile. "in Vista & Windows 7.
http://www.Vistax64.com/tutorials/135858-user-profile-error-logged-temporary-profile.htmlBE VERY CAREFUL IF YOU USE THIS ONE:
DO NOT USE THE ACCOUNT HIDDEN ON A DAILY BASIS! If it corrupts you are TOAST.
How to enable or disable the built-in Windows 7 Administrator account
http://www.SevenForums.com/tutorials/507-built-administrator-account-enable-disable.htmlUse the hidden administrator account to lower your user account APPLY / OK and then lift it to ADMIN. This allows clear of corruption. Do the same for other accounts if necessary after following the above message.
You can use the hidden - administrator account to make another account as an ADMINISTRATOR with the same password (or two with the same password) to use a test or fix the other.
You can run the Admin account hidden from the prompt by if necessary.
How Boot for Windows 7 System Recovery Options or use a Windows 7 boot disk.
http://www.SevenForums.com/tutorials/668-system-recovery-options.htmlWhat are the system recovery options in Windows 7?
http://Windows.Microsoft.com/en-us/Windows7/what-are-the-system-recovery-options-in-Windows-7How to create a Windows 7 system repair disc
http://www.SevenForums.com/tutorials/2083-system-repair-disc-create.htmlIf you cannot access your old account, you can still use an Admin to migrate to another (remember to always leave an Admin who is not used except for testing and difficulty account).
Difficulty of a corrupted user profile
http://Windows.Microsoft.com/en-us/Windows7/fix-a-corrupted-user-profileI hope this helps.
--------------------------------------------------------------------------------------------
Rob Brown - Microsoft MVP<- profile="" -="" windows="" and="" devices="" for="" it :="" bicycle="" -="" mark="" twain="" said="" it="">-> -
I can't log into my account. I am the administrator of the system account, but he said: "the service user profile Service has no log on." User profile cannot be loaded. Any suggestions? I can connect to other accounts, but they are not administrative accounts.
· Restore point:
Do in Mode safe, if necessary.
Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.
Try a restore of the system once, to choose a Restore Point prior to your problem...
Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~If the above does not work:
http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspx
Difficulty of a corrupted user profile
After creating the profile, you can copy the files from the existing profile. You must have at least three user accounts on the computer to perform these operations, including the new account that you created.
See you soon.
Mick Murphy - Microsoft partner
-
The user profile Service and the user profile cannot be loaded
My Windows Vista has just received an automatic update online. Now I can login to my administrator account more. I get two error messages) 1 the user profile Service does not logon and the user profile 2) cannot be loaded.
I can sign in as a guest, but I don't see any of my documents and files as they are accessible only when I log in under my logon administrator... Help
Try this:
http://support.Microsoft.com/kb/947215
"A programmer is just a tool that converts the caffeine in code" Deputy CLIP - http://www.winvistaside.de/
-
Unable to connect: the user profile failed to connect, the user profile cannot be loaded
Remember - this is a public forum so never post private information such as numbers of mail or telephone!
Ideas:
- You have problems with programs
- Error messages
- Recent changes to your computer
- What you have already tried to solve the problem
Thank you Fiona
OK all of a sudden my laptop no longer works so I restart and when it asks me to enter my password as it does whenever I turn on the computer or restart I got this message today the USER PROFILE does NOT logon, PROFILE not CAN NOT BE CHARGE. What - what IT MEANS AND HOW can I FIX? Help, please!
First try to restart your PC and press the F8 key, and then choose last known good configration.
If that has not resolved the issue of follow-up:
http://Windows.Microsoft.com/en-AU/Windows-Vista/fix-a-corrupted-user-profile
-
User profile cannot be loaded error prevents the log on.
Greetings,
I work with a Windows 7 computer. Access is via a password protected user account. When I provide the password, I get a message indicating that the user profile cannot be loaded.
I would like to provide the exact text of the error, but it is in Spanish and I'm sure you get the picture. I always write in English to maximize my audience.
I already tried to start in safe mode and access the computer with the administrator account to the default system, but apparently that was disbled, and I can only connect with the above user account...
... that the profile cannot be loaded.
Any help in finding ways to access the machine would be great.
Kind regards
Jean-Pierre
Pegasus,
Thanks for the reply. I apologize for the multiple postings, but I was under pressure by the friend for whom I am trying to solve the problem. Users never understand the challenges inherent to resolve hardware/software problems, especially when you are dealing with the issues that you have not solved before.
In any case, thank you very much for the links. I hope they work for me.
Jean-Pierre
-
The above message appears when I try to log in. He only started past today, for no apparent reason. I can access a different account on my computer, but that information is stored on my own connection. The administrator so I cannot get a more far by creating other accounts etc, (which would not have the info I need anyway). Help... I work from home so it's impossible to get anything done. Thank you.
Hello suestev,
Thanks for posting your question on the Microsoft answers Forum.
Please see the Microsoft KB article below for assistance with the error:
KB 947215 - error message when you log on a Windows Vista-based computer by using a temporary profile:
"The user profile Service has no logon. Unable to load the user profile.
http://support.Microsoft.com/kb/947215I have included several links that addresses the error message for the user profile cannot be loaded.
You profile might be corrupted and needs to be recreated.You can also check the tutorial to
http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.htmlGood thread on Technet dealing with corrupted user profiles
http://social.technet.Microsoft.com/forums/en-us/itprovistasecurity/thread/e806dd5d-6764-463e-B181-e3aaee271231/How to fix a corrupted user profile:
http://windowshelp.Microsoft.com/Windows/en-us/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspxIf please reply back and let us know if these articles have helped solve your problem or if you still need help.
Sincerely,
Marilyn
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think. -
Original title: cannot use my administrator profile
When loging on my laptop, I get this error when I click on my profile administrator "user profile Service is not the user of the connection profile cannot be loaded. This comes after the password is accepted. The only way I can connect to my computer is one of my accounts of comments. I can't change anything because I can't sign as an administrator. How can I fix? I have a Compacq laptop running Windows Vista
Original title: cannot use my administrator profile
When loging on my laptop, I get this error when I click on my profile administrator "user profile Service is not the user of the connection profile cannot be loaded. This comes after the password is accepted. The only way I can connect to my computer is one of my accounts of comments. I can't change anything because I can't sign as an administrator. How can I fix? I have a Compacq laptop running Windows Vista
If you cannot connect to your admin account, no tutorials can help you because they need you to connect to an administrator account to carry out the instructions.
See if the following can get an admin account...
Go to Safe Mode...
Restart your computer > immediately and repeatedly pressing the F8 key until you see a black and white screen. The top/down arrow and select Mode safe mode with networking.
Now, while in safe mode, you perform one of the following?
1 can connect to your account admin without the error message?
If so, do. Then do a system restore. Choose a date when you were free to login to your account admin as your restore point.http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/
If the system restore does not slove the problem, then use this tutorial
http://support.Microsoft.com/kb/947215
2. If you are unable to log in to your account administrator in safe mode, you see another administrator next to your account?
If so, you are lucky. This is the built-in Administrator account.
There is, by default, no password.
It could connect and do the system restore.If the system restore is not enough, then perform the tutorial even as above:
http://support.Microsoft.com/kb/947215If you can't do or of what precedes, I'm afraid you will have to re - install your Vista.
-
I just installed the three latest updates (04/27/11) and now my desktop computer says "the service user profile Service does not log. User profile cannot be loaded. "Does anyone have any suggestions. I now use my laptop because I was the only user on the desktop, there is no way to get on it now.
Hello
1st thing to try is the system in safe mode restore to before the problem
http://www.windowsvistauserguide.com/system_restore.htm
Windows Vista
Using the F8 method:
- Restart your computer.
- When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
- Select the Safe Mode option with the arrow keys.
- Then press enter on your keyboard to start mode without failure of Vista.
- To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
- Do whatever tasks you need and when you are done, reboot to return to normal mode.
If that does not solve it read more
read the tutorial below
When you log on a Windows Vista-based or a Windows 7 computer by using a temporary profile, you receive the following error message:
The user profile Service has not logon. User profile cannot be loaded.http://support.Microsoft.com/kb/947215#letmefixit
Your user profile was not loaded correctly! You have been logged on with a temporary profile.
http://support.Microsoft.com/kb/947242
If you tried to log on to Windows and received an error message telling you that your user profile is damaged, you can try to fix it. You will need to create a new profile and then copy the files from the existing to the new profile. You must have at least three user accounts on the computer to perform these operations, including the new account that you created.
http://Windows.Microsoft.com/en-us/Windows-Vista/fix-a-corrupted-user-profile
-
I need to know what I can do from here?
I can't click on my desktop, start menu or any other article... the only page that I discovered is my login page
Hello
You can try to fix it with Safe Mode - repeatedly press F8 as you bootup. The ADMIN account in trunk
Mode has no default password (unless someone has changed the password so it should be available).Some programs such as the updated Google (if you added the toolbar Google, Chrome or Google Earth)
has been known to cause this problem.Error message when you log on a Windows Vista-based or Windows 7 using computer a
Temporary profile: "the user profile Service has no logon. Unable to load the user profile.
http://support.Microsoft.com/kb/947215How to fix error "the user profile Service has no logon. User profile cannot be loaded. »
http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.htmlHow to fix error "your user profile was not loaded correctly! You have been connected with a
temporary profile. "in Vista
http://www.Vistax64.com/tutorials/135858-user-profile-error-logged-temporary-profile.htmlBE VERY CAREFUL IF YOU USE THIS ONE:
DO NOT USE THE ACCOUNT HIDDEN ON A DAILY BASIS! If it corrupts you are TOAST.
How to enable or disable the real built-in Administrator account in Vista
http://www.Vistax64.com/tutorials/67567-administrator-account.htmlUse the Admin account hidden to lower your user account APPLY / OK then wear again to
ADMIN. This allows clear of corruption. Do the same for other accounts if necessary after the
above message.You can use the hidden - administrator account to make another account as an ADMINISTRATOR with your same
password (or two with the same password) use a test or difficulty to another.You can run the Admin account hidden from the prompt by if necessary.
This tells you how to access the System Recovery Options and/or a Vista DVD
http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspxIf you cannot access your old account, you can still use an Admin to migrate to another (don't forget
always leave to an Admin who is not used except for testing and difficulty account).Difficulty of a corrupted user profile
http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspxI hope this helps.
Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.
-
The user profile service has not logon. User profile cannot be loaded error message
original title: user profiles
I have recently all of a sudden can't open my user profile. When I put my password in it reads that the user profile service has no logon. User profile cannot be loaded. I am the Administrator without getting on my user profile, I can't do anything. How you start in safe mode? I really need help!
Hello
You can try to fix it with Safe Mode - repeatedly press F8 as you bootup. The ADMIN account in trunk
Mode has no default password (unless someone has changed the password so it should be available).Some programs such as the updated Google (if you added the toolbar Google, Chrome or Google Earth)
has been known to cause this problem.Error message when you log on a Windows Vista-based or Windows 7 using computer a
Temporary profile: "the user profile Service has no logon. Unable to load the user profile.
http://support.Microsoft.com/kb/947215How to fix error "the user profile Service has no logon. User profile cannot be loaded. »
http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.htmlHow to fix error "your user profile was not loaded correctly! You have been connected with a
temporary profile. "in Vista
http://www.Vistax64.com/tutorials/135858-user-profile-error-logged-temporary-profile.htmlBE VERY CAREFUL IF YOU USE THIS ONE:
DO NOT USE THE ACCOUNT HIDDEN ON A DAILY BASIS! If it corrupts you are TOAST.
How to enable or disable the real built-in Administrator account in Vista
http://www.Vistax64.com/tutorials/67567-administrator-account.htmlUse the Admin account hidden to lower your user account APPLY / OK then wear again to
ADMIN. This allows clear of corruption. Do the same for other accounts if necessary after the
above message.You can use the hidden - administrator account to make another account as an ADMINISTRATOR with your same
password (or two with the same password) use a test or difficulty to another.You can run the Admin account hidden from the prompt by if necessary.
This tells you how to access the System Recovery Options and/or a Vista DVD
http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspxIf you cannot access your old account, you can still use an Admin to migrate to another (don't forget
always leave to an Admin who is not used except for testing and difficulty account).Difficulty of a corrupted user profile
http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspxI hope this helps.
Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.
-
I can't log on Windows Vista
Hello
You can try to fix it with Safe Mode - repeatedly press F8 as you bootup. The ADMIN account in trunk
Mode has no default password (unless someone has changed the password so it should be available).Some programs such as the updated Google (if you added the toolbar Google, Chrome or Google Earth)
has been known to cause this problem.Error message when you log on a Windows Vista-based or Windows 7 using computer a
Temporary profile: "the user profile Service has no logon. Unable to load the user profile.
http://support.Microsoft.com/kb/947215How to fix error "the user profile Service has no logon. User profile cannot be loaded. »
http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.htmlHow to fix error "your user profile was not loaded correctly! You have been connected with a
temporary profile. "in Vista
http://www.Vistax64.com/tutorials/135858-user-profile-error-logged-temporary-profile.htmlBE VERY CAREFUL IF YOU USE THIS ONE:
DO NOT USE THE ACCOUNT HIDDEN ON A DAILY BASIS! If it corrrups you are TOAST.
How to enable or disable the real built-in Administrator account in Vista
http://www.Vistax64.com/tutorials/67567-administrator-account.htmlUse the Admin account hidden to lower your user account APPLY / OK then wear again to
ADMIN. This allows clear of corruption. Do the same for other accounts if necessary after the
above message.You can use the hidden - administrator account to make another account as an ADMINISTRATOR with your same
password (or two with the same password) use a test or difficulty to another.You can run the Admin account hidden from the prompt by if necessary.
This tells you how to access the System Recovery Options and/or a Vista DVD
http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspxIf you cannot access your old account, you can still use an Admin to migrate to another (don't forget
always leave to an Admin who is not used except for testing and difficulty account).Difficulty of a corrupted user profile
http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspxI hope this helps.
Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.
-
When I click on my user profile, I get the following error messages: the user profile service service failed to connect. User profile cannot be loaded.
Isn't that one profile, the administrator and another account are ok
· Restore point:
Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.
Try a restore of the system once, to choose a Restore Point prior to your problem...
Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~If the above does not work:
See if the information in the above tutorial will help you.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
http://support.Microsoft.com/kb/947215#letmefixit
Error message when you log a computer Windows Vista-based or Windows 7 by using a temporary profile: "the user profile Service has no logon. Unable to load the user profile.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspx
Difficulty of a corrupted user profile
After creating the profile, you can copy the files from the existing profile. You must have at least three user accounts on the computer to perform these operations, including the new account that you created.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
http://support.Microsoft.com/kb/947242
A temporary profile is loaded after you connect to a Windows Vista-based system
See you soon.
Mick Murphy - Microsoft partner
Maybe you are looking for
-
Can TestStand create a new database
I have what I thought, it was a simple question, but I can't find the solution. When you use the data logging choose us what file it is written (I use Access). I was wondering if there is a way to have TestStand automatically create and save a new fi
-
I'm unable to remove the live onecare backup files to my external drives
I can't delete allows you to delete the backup files Live Onecare to external drives
-
I had to reinstall Windows and when the time came to enter my validation code, a lot of numbers and letters have rubbed off. Is there another way to authenticate/validate Windows? Thank you
-
unwanted files displayed on the desktop
I have a document displayed on the desktop file and want to get rid of him. How can I do it please?
-
BlackBerry smartphones can not get rid of the indicator of electronic mail.
I have an icon of the little envelope on my screen, which indicates that I have an email unread in my Inbox. Great, but the problem is that I don't have the unread emails or sms, and the icon appears continuously. Could someone tell me how I can remo