Error then Ceating user and configuration AD resource

Similar Questions

• Change the attributes of the user and configuration of resources

  Hello
  
  For the first look, I have a simple question. Where can I see changing attributes of the user and information about the history that did? I can see a upa_fields of the table, but there is no information on directors who did it.
  And the same question on resources. I need to get a way how to display information on the directors who provided resources for different users and administrators who have made changes in these resources. Y at - it all tables that can help me in it?
  Is there other variants of this information?
  
  I use OIM 11 g R1.
  
  Thank you.

  If you need only to know which revoked a resource, you can use this:

  Select usr.usr_login, obj.obj_name, ost.ost_status, rev.usr_login 'Revoker.
  Ouedraogo, usr, obi, obj, ost, usr rev
  where oiu.usr_key = usr.usr_key
  and oiu.obi_key = obi.obi_key
  and obi.obj_key = obj.obj_key
  and oiu.ost_key = ost.ost_key
  and oiu.oiu_updateby = rev.usr_key
  and ost.ost_status = 'revoked '.

  -Kevin

• connection of users and configuration of MAX

  I searched the site for 3 days and finally found a post titled; "IAK login user and configuration MAX" on 04/21/2009 who has asked pretty much the same problem, I'm going to. I wonder if there is something new on this subject because I need a solution.

  I installed an application and the NI FP driver suite see 6.0.11. I run NI MAX and open my. File IAK, which is located in the folder/common directory as well as the executable file of my application. At the beginning I used to hit the 'Save' selection but have found since that it makes no difference, so now, I'm not hitting 'Save', but just close MAX. This process is to record the location of my. IAK file somewhere, because after that my application runs and communicates very well with my e/s.

  The problem comes when I have the new station operators connect to the computer that controls the operation of my test. the application that auto starts because it is in the startup folder "All Users" cannot communicate with inputs and outputs.

  MAXIMUM running and opening the. IAK file under each new user login then immediately closing MAX solves the problem and all is well, and this process must occur the first time that a new user connects to the computer. The post mentioned above indicates that it is a normal behavior.

  The problem is that some of my operators do well to find the power button and turn on all the morning. The application is no "Exit", "Task Manager" should be used to stop it. Login information is stored on a post-it in their portfolio, and ask them to open MAX and save the configuration is just too much for them to do - be unfamiliar with the operation at first.

  Can someone explain to me how to fix this or refer me to a validated solution?

  Thank you

  OK - here it is:

  It works for me under Windows 7 with FP1000 e/s on a serial Comm. port other configurations may or may be not the same in these respects.

  While logged in as a privileged user configure you application to work and communicate with the e/s using an IAK file. Create the IAK via NI MAX.

  Is the key to register of interest here: [HKEY_CURRENT_USER\Software\National Instruments\FieldPoint Explorer\Recent File List]

  The string value is: "File1"="C:\ApplicationPath\IOConfigurationFile.IAK."

  Start the REGEDT32 Registry Editor. EXE and navigate to the key just below SOFTWARE that tells of National Instruments.

  Select the key, and then right-click on it. Select EXPORT, select a path and name of the output file.

  There will be many other entries, but this recent file one is the only one that may be necessary.

  You will end up with one. REG file with the specified name that contains the following elements:

  Windows Registry Editor Version 5.00

  [HKEY_CURRENT_USER\Software\National tools]

  [HKEY_CURRENT_USER\Software\National Instruments\FieldPoint Explorer]

  [HKEY_CURRENT_USER\Software\National Instruments\FieldPoint Explorer\Recent File List]
  'File1"="C:\\ApplicationPath\\IOConfigurationFile.iak '.

  Create a BAT file under the name of your choice. Configure.BAT for example.

  This BAT file will reside in the directory of your application with your Important file and it will contain 1 line.

  This:

  REG IMPORT "C:\ApplicationPath\ConfigurationRegistryExportFile.REG" > rejconfig.log

  Place a shortcut to it. BAT file in the 'All Users' Start menu.

  Any user who connects will receive this update of the registry which will allow the driver to IO to know how to communicate with your IO.

  Replace your appropriate to the ApplicationPath, IOConfigurationFile, ConfigurationRegistryExportFile, rejconfig.log file names. The log file will be written only for in the case of an error.

  Good luck

  Dfhotz

• Discoverer 10 g and R12 error - name of user and password invalid

  Hi all
  
  I have R12 and Discoverer Desktop 10.1.2.1 (user and admin) alone on the same Windows machine.
  
  I can connect to the discoverer as the APPS user without problem, create workbooks and EUL and see the data.
  
  However, I can not connect as a user of Apps. I copied the CBD to the Oracle Discoverer House (c:\\oracle\BIToolsHome_1) file.
  I didn't update all files opmn.xml but as I don't know which ones to update (if any as it is the only desktop).
  
  Any help appreciated.
  
  Thank you
  Alex
  
  Published by: AlexChard on May 27, 2009 11:06

  Alex,

  If patch Discoverer Administrator/Desktop does not help, then I suggest connect you an SR and confirm with support of Oracle that you can run these tools without having the patches contained in the following document applied.

  Note: 443661.1 - Discoverer 10g (10.1.2) connect to Oracle E-Business Suite 12 fails with "Invalid Username/Password".
  https://metalink2.Oracle.com/MetaLink/PLSQL/ml2_documents.showDocument?p_database_id=not&P_ID=443661.1

  Kind regards
  Hussein

• Lightroom strange error then to develop and the lack of catalog

  Hello

  I just almost had a heart attack. I was editing photos and jumps between devleop and Slideshow module... when running a slide show, a beige screen appeared instead of the photo so I pressed "ESC" to exit the slideshow full screen and photos have started to get the exclamation sign and possibly the photographs showed no... I right click on the folder where pictures are stored and click on synchronize folder... After that all development settings have been removed and there is no pictures in the current catalog... I went to the file - open recent - Untitled.lrcat... He opened all the photos but without adjustments and collections... The last backup I have is 4 months... is possible to restore the catalog to an earlier version of the backup of 4 month?

  So on the next day after the answer above, I thought a possible that might arise the problem you encountered.

  If the disk containing the photos suddenly and unexpectedly been physically disconnected while you work (because something hit the connecting cable, or the cable is not correctly connected, or perhaps a failing drive), this could cause what you saw. It does not really help resolve the problem, however, I don't think there is a fix at this stage.

• Receive error message on installation and configuration of the laboratory of Automation Center IaaS component vCloud

  

  You install the .net on the correct server? Because printing, I assume this is a Windows Server 2003, and according to the following link, .net Framework 4.5 is not supported by Windows Server 2003: .NET Framework system requirements

• doubt Doc ID 1618305.1 how to install and configure the user interface for content with WebCenter content 11.1.1.8.0

  doubt Doc-ID 1618305.1 How to install and configure the user interface with WebCenter content 11.1.1.8.0 content

  The portal_domain field contains;

  AdminServer (admin) and Enterprise Manager, (port 7001)

  IBR_server1, (port 16250)

  UCM_server1, (port 16200)

  WC_Spaces1, (port 8888).

  On the same machine, I have another weblogic, admin and for the ITS.

  The case is that continued to develop for the upgrade to the new skin WebCenter content.

  That's my goal.

  Then I did some research and came to the following notes in support.

  1 - how to install and configure the UI content with WebCenter content 11.1.1.8.0 and 11.1.1.9.0 (Doc ID 1618305.1()

  https://support.Oracle.com/epmos/faces/DocContentDisplay?_afrLoop=290841671406625 & ID = 1618305.1 & _afrWindowMode = 0 & _adf. CTRL-State = c7eq7vwdt_216

  and

  2 - update of the 11.1.1.8.0 UI content after you apply the Patch of Bundle WebCenter content 3 (MLR 3) or higher (Doc ID 1617477.1()

  https://support.Oracle.com/epmos/faces/DocContentDisplay?_afrLoop=291485823387355 & ID = 1617477.1 & _afrWindowMode = 0 & _adf. CTRL-State = c7eq7vwdt_245

  The UCM_server1 has the following House / app / oracle / Middleware / Oracle_ECM1 /.

  And the list of patches;

  ===================================================================================================

  Installed products of higher level (1):

  Oracle WebCenter content management install 11.1.1.8.0

  There are 1 products in this House of Oracle.

  Installed products (40):

  Cloning of the 11g Application Server 11.1.1.8.0 component

  Enterprise Manager Application Server Integrator Plugin - Management Service Support11.1.1.7.0

  FMW Control Plugin for Oracle inbound refinery 11.1.1.8.0

  FMW Control Plugin for Oracle WebCenter Capture 11.1.1.8.0

  Component install SDK 11.1.0.9.0

  Oracle Application Server Configuration 11.1.1.7.0

  Part of Oracle 11.1.1.7.0 Bali

  Oracle 11.1.1.8.0 capture

  Common files Oracle WebCenter content management 11.1.1.8.0

  Oracle Content Server 11.1.1.8.0

  Content of Oracle 11.1.1.8.0 Server component

  Content access Content Server Oracle 11.1.1.8.0

  Access to the contents of the Oracle Content Server 11.1.1.8.0 files

  Oracle Content Server Core 11.1.1.8.0

  Oracle 11.1.1.8.0 server content distribution

  Oracle extended Windowing Toolkit 11.1.1.7.0

  Oracle Fusion Middleware Admin Config 11.1.1.6.0

  Oracle Help for Java 11.1.1.7.0

  Oracle Help for the Web - UIX 11.1.1.7.0

  Oracle Help for the Web Shared Library 11.1.1.7.0

  Oracle Help share library 11.1.1.7.0

  Ice browser Oracle 11.1.1.7.0

  Oracle IRM                                                           11.1.1.6.0

  Oracle extended JFC Windowing Toolkit 11.1.1.7.0

  One-time correction of Oracle 11.1.0.9.9 installer

  Oracle outside in technology 8.4.0.0.0

  Oracle Remote Client of Intradoc 11.1.1.8.0

  Component of Oracle 11.1.1.7.0 rules

  Oracle SOA 11.1.1.7.0 workflow

  Universal Oracle install 11.1.0.9.0

  Oracle Upgrade Wizard 11.1.1.8.0

  Oracle Upgrade Wizard 11.1.1.8.0

  Upgrade Oracle WebCenter content management 11.1.1.8.0 Assistant

  Oracle WebCenter Capture 11.1.1.8.0

  Oracle Webcenter content - rights 11.1.1.7.0 documentalist

  Oracle WebCenter content - Universal Content Manager 11.1.1.8.0

  Oracle WebCenter content management install 11.1.1.8.0

  Oracle WebCenter content 11.1.1.8.0 management product suite

  Oracle WebCenter content: Imaging 11.1.1.8.0

  OracleAS Documentation 11.1.1.8.0

  There are 40 products installed in this House of Oracle.

  Interim plates (2):

  Patch 18188143: applied the sea Mar 19 17:37:32 BRT 2014

  Patch ID: 17263162

  Created February 5, 2014, 12:56:41 pm

  Bugs fixed:

  15872313, 17184457, 17515691, 16633496, 14317920, 15991141, 16892410

  14071471, 17929776, 13414481, 16042293, 17018964, 17627211, 16768600

  16037162, 14521663, 17768056, 14738077, 16460053, 17567819, 17806416

  15905591, 16080297, 17569908, 17043756, 18139768, 17211093, 17805499

  16418434, 16828356, 16671687, 17039391, 16698130, 17943394, 17632731

  17560900, 14246603, 15941347, 16045712

  Location of patch in the inventory:

  / app/Oracle/middleware/Oracle_ECM1/Inventory/oneoffs/18188143

  Patch location in the storage area:

  /app/Oracle/middleware/Oracle_ECM1/.patch_storage/18188143_Feb_5_2014_12_56_41

  Patch 18088049: applied the sea Mar 19 17:35:58 BRT 2014

  Patch ID: 17182855

  Created February 16, 2014 20:35:48 hrs PST8PDT

  Bugs fixed:

  17919101, 17894065, 17884570, 17883868, 17883112, 17854549, 17835742

  17832305, 17819213, 17812338, 17789722, 17783376, 17778867, 17761746

  17740542, 17733871, 17698852, 17658821, 17642431, 17636186, 17622384

  17616664, 17616611, 17616489, 17613656, 17608703, 17589960, 17581458

  17574153, 17567413, 17565564, 17558210, 17558068, 17546505, 17545841

  17540480, 17528590, 17514070, 17511368, 17511271, 17511089, 17501678

  17500375, 17475733, 17449617, 17421368, 17417817, 17416821, 17416807

  17416771, 17416377, 17416343, 17402732, 17401071, 17401052, 17397875

  17393920, 17393892, 17369286, 17368525, 17368096, 17362858, 17362130

  17354877, 17353764, 17352746, 17335303, 17335290, 17330493, 17324707

  17323595, 17323038, 17317268, 17314494, 17313064, 17313052, 17313000

  17312990, 17312933, 17312863, 17312366, 17298386, 17295962, 17290804

  17285105, 17270986, 17261952, 17255019, 17219134, 17216119, 17206903

  17201035, 17200854, 17199763, 17187804, 17185539, 17171852, 17171818

  17164502, 17160600, 17153780, 17074852, 17050451, 17049175, 17026301

  17008220, 17007746, 17007534, 17006378, 16999307, 16999291, 16991380

  16980256, 16980207, 16980196, 16979042, 16961904, 16958142, 16954858

  16941623, 16936055, 16936048, 16936036, 16936020, 16936006, 16935987

  16935976, 16921682, 16908287, 16858148, 16815976, 16796213, 13931337

  17424037, 17006115, 17171834

  OPatch succeeded.

  ==============================================================================================

  And contains the following configurations in config.cfg

  ==============================================================================================

  SocketAddressHostSecurityFilter = 127.0.0.1 | 0:0:0:0:0:0:0:1 | 192.168.1. * | 10.62.1.79

  xPortalSecurityPropagate = true

  Web server = javaAppServer

  AllowUpdateForGenwww = 1

  SearchIndexerEngineName = OracleTextSearch

  IndexerDatabaseProviderName = SystemDatabase

  AdditionalEscapeChars = -: #.

  FileEncoding = UTF8

  MaxQueryRows = 2000

  DisableAuthorizationTokenCheck = true

  IntradocServerPort = 4444

  SchemaPublishInterval = 604800

  SSAllowDelayedProjectWrites = true

  IdcServerThreadQueryTimeout = 120

  DisableQueryTimeoutSupport = false

  MaxSearchConnections = 20

  #Cache

  UseSearchCache = false

  #

  #AdditionalEscapeChars = _: #, -: {-}, has: A, GOLD: GOLD, CAN: CAN, AND: AND at the END:

  # Accesing a content item on a mapped Web URL (WebUrlMap) fails with the error: "unable to retrieve the content. Security access denied» (Doc ID 1639028.1()

  MaxAccountsInSecurityClause = 300

  # end (Doc ID 1639028.1()

  #Search fails for external users in WCC after upgrade to 11.1.1.8.0 (Doc ID 1676468.1()

  DoCaseInsensitiveAcctSearch = false

  # end (Doc ID 1676468.1()

  #MigrationFormatForfApplicationGUID = dCollectionName:dCollectionGUID

  ==============================================================================================

  To my UCM_Server1 content WebCenter.

  As I already have a WebCenter content I have to follow the second part of the note

  How to install and configure the UI content with WebCenter content 11.1.1.8.0 and 11.1.1.9.0 (Doc ID 1618305.1).

  Install and configure content WebCenter ADF WebUI against WebCenter Content Server

  Step 1) install the MDS schema

  (Step 2), install the Weblogic Server

  11 GR 1 material step 3) DOWNLOAD and install Oracle Application Development Framework (11.1.1.6.0) in the new WebUI WLS Middleware House, found here

  Step 4) Download and apply Patch 16, 546 129.

  Step 5) Download and apply Patch 16, 546 157.

  Step 6) download and apply the Patch and then 19,469,801, 18,102,108 Patch

  Step 7) copy the wccadf files in the field of user interface

  Step 8) Oracle on demand services (MDS) metadata registry

  Step 9) Place the WebCenter content domain user interface model

  Step 10) run the Setup Wizard on the new home of Middleware WebUI to create the new domain

  Step 11) updated the Oracle ADF of shared libraries

  Step 12) start the domain WebUI administration server

  Step 13) Save target Managed Server with the MDS repository and create the metadata partition

  Step 14) start the server managed WebUI.

  Step 15) associate UI WebCenter content to Content Server.

  Step 16) reboot the WebUI ADF server managed.

  Step 17 access the WebUI

  Step 18) complete the Configuration of the workflow

  Step 19) apply the latest Patch Bundle content UI of WebCenter

  MY DOUBT IS:

  To read the steps that I understood, to 19, with success, in the end, I will have an another WebLogic with a domain name and its respective EM.

  I have two servers weblogic?

  portal_domain (explained above) and a new wccui_domain wls and domain.

  This fix it?

  Two WLS to keep WebCenter portal and content, and other elements.

  Because I'm not able to do with the WLS even where I UCM_server1 today?

  Thanks for all suggestions and criticism.

  To read the steps that I understood, to 19, with success, in the end, I will have an another WebLogic with a domain name and its respective EM.

  I have two servers weblogic?

  portal_domain (explained above) and a new wccui_domain wls and domain.

  This fix it?

  Two WLS to keep WebCenter portal and content, and other elements.

  Because I could not do with the WLS even where I UCM_server1 today?

  Yes, up to 11.1.1.9.0, you will need to install a new wls House (new wls server admin) and then configure WCC ui there. User interface and COE will not work in the same field. You can have the portal and content under the same House of wls and install a new one for the user interface.

  This is due to a problem with ADF and WCC libraries.

  With 12 c, this dependence is not there, and you can install / configure all 3 (Portal, content and adf ui) applications on the same domain.

• WinHTTP.dll error then that he was trying to access Youtube and adobe Flash

  Original title: been trying to get in youtube and adobe flash, error screens keep coming by saying winhttp.dll must be reinstalled, but I don't know where to go or how to reinstall.
  

  How can I reinstall winhttp.dll

  have tried to get into youtube and adobe flash, error screens keep coming by saying winhttp.dll must be reinstalled, but I don't know where to go or how to reinstall.  Can u please help me?

  Hello

  1. what web browser do you use?

  2. If you are using Internet Explorer, version of Internet Explorer is installed on the computer?

  Method 1:

  Run the System File Checker and check if the problem still persists. To do this, please click on the link below:

  http://support.Microsoft.com/kb/310747

  If you are prompted to insert the disc to scan SFC, please visit the link below:

  http://support.Microsoft.com/kb/900910

  Method 2:

  This issue could also be caused by a Virus/Malware infection on the system, I would say that you download and run a full scan of the system using the Microsoft Safety Scanner and check if that helps resolve the issue.

  Microsoft safety scanner

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note:

  The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  Method 3:

  New user account

  Create a new user account and see if the problem still occurs in the new user account.

  How to create and configure user accounts in Windows XP

  http://support.Microsoft.com/kb/279783

• When I start my laptop (running vista 32-bit) upward and the connection, get this error message "error loading c:\users\Appdata\Local\Temp\sshnas.dll".

  When I start my laptop (running vista 32-bit) upward and the connection, get this error message "error loading c:\users\Appdata\Local\Temp\sshnas.dll".

  Hello

  Download update and scan with the free version of malwarebytes anti-malware

  http://www.Malwarebytes.org/MBAM.php

  You can also download and run rkill to stop the process of problem before you download and scan with malwarebytes

  http://www.bleepingcomputer.com/download/anti-virus/rkill

  If it does not remove the problem and or work correctly in normal mode do work above in safe mode with networking

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode with networking with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

• During the installation of the ultimate upgrade, get "one or several components of the system could not be configured", then it restarts and pours me to premium.___How can I say what is the cause of the problem and fix it?

  I have the same problem as Laweaver.
  I have a HP pavillion Model # m9040n running the 32-bit version with service pack 1.
  My Vista Ultimate Upgrade drive is 32 bit and also has Service Pack 1 on it.
  I ran my system through the Microsoft Update and it is common.
  I ran Vista Advisor and he tells me that everything is good to go.
  I also ran my system through the center of update of HP and he is current.
  I tried the Ultimate Upgrade three times and got the same message twice.
  Of course, it waits until it reaches "end of the upgrade" before it fails.
  I turned all the extra wide including the firewall when I tried the upgrades
  My computer came with the home edition Premium already installed on it and I have the disks of backup for him if I have to do a repair on it.
  I have the same question though - how to tell what the cause of the problem and fix?
  Thank you
  Rich

  Hi Eaglesoar1,

  This problem occurs because some features of Windows Vista cannot be migrated to the upgraded version of Windows Vista.

  To resolve this issue, follow these steps:

  1. click on Start, type programs and features in the search box, and then click programs and features in the list programs.
  2. under tasks, click on turn Windows features on or OFF.
  If you are prompted for an administrator password, type the password. If you are prompted to confirm, click continue.
  3. Click to clear the check boxes for the following features:
  o Microsoft .NET Framework 3.0\XPS Viewer
  O remote differential compression
  O DFS replication service window
  4 upgrade Windows Vista to a more advanced version and then click to select the check boxes that you clicked to clear in step 3.

  For more information see the Microsoft kb article below.
  Error message when you try to upgrade Windows Vista to a more advanced version of Windows Vista: "Windows cannot configure one or more system components to install Windows, restart the computer, and restart the installation.
  http://support.Microsoft.com/kb/946078

  I hope this helps!

  Halima S - Microsoft technical support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• ERROR: No session file or name of user and password provided

  Hey guys,.

  I wrote (tried) to create a script that counts my CPU, carrots, son of my vcenter.

  I get the following error message "ERROR: no session file or name of user and password provided.

  My Code:

  #! / usr/bin/perl - w

  use warnings;

  use VMware::VIRuntime;

  use VMware::VILib;

  1. to connect to the server and connection

  Util::Connect();

  My $cpucount = 0;

  My $corecount = 0;

  My $threadcount = 0;

  1. Get all the hosts to the group title

  My $host_view = Vim::find_entity_views (view_type = & gt; "HostSystem',);

  {foreach (@$host_view)}

  Print "hostname:", $_ - & gt; name, "\n";

  Print "CPUs:", $_ - & gt; hardware - & gt; cpuInfo - & gt; numCpuPackages, "\n";

  $cpucount = $cpucount + $_ - & gt; hardware - & gt; cpuInfo - & gt; numCpuPackages;

  Print "CPU cores:", $_ - & gt; hardware - & gt; cpuInfo - & gt; numCpuCores, "\n";

  $corecount = $corecount + $_ - & gt; hardware - & gt; cpuInfo - & gt; numCpuCores;

  Print "CPU Threads:", $_ - & gt; hardware - & gt; cpuInfo - & gt; numCpuThreads, "\n";

  $threadcount = $threadcount + $_ - & gt; hardware - & gt; cpuInfo - & gt; numCpuThreads;

  Print "\n";

  }

  Print "Summary: \n";

  Print "CPUs:", $cpucount, "\n";

  print ' Cores: ", $corecount,"\n ";

  Print "Threads:", $threadcount, "\n";

  1. close the connection to the server

  Util::Disconnect();

  You are missing your credentials section to collect the user name and password and I guess that by default to waiting for you provides a session file that includes the user name and password. Take a look at one of the sample scripts vCLI, you'll want to add the following:

  Opts::parse();
  Opts::validate();
  Util::connect();
  

  This will force the script to validate for - server, - username and password - if you have not already specified.

  =========================================================================

  William Lam

  VMware vExpert 2009,2010

  VMware scripts and resources at: http://www.virtuallyghetto.com/

  Twitter: @lamw

  repository scripts vGhetto

  Introduction to the vMA (tips/tricks)

  Getting started with vSphere SDK for Perl

  VMware Code Central - Scripts/code samples for developers and administrators

  VMware developer community

  If you find this information useful, please give points to "correct" or "useful".

• When I try to open Active Directory users and computers in Windows Server 2008 Standard, I get an error message.

  MMC.exe APPCRASH

  When I try to open Active Directory users and computers in Windows Server 2008 Standard, I get the error message below. Kindly help

  Problem event name: APPCRASH

  Application name: mmc.exe

  Application version: 6.0.6001.18000

  Application timestamp: 47918d 09

  Fault Module name: KseAdm.dll

  Fault Module Version: 6.0.1262.1064

  Timestamp of Module error: 49426cbb

  Exception code: c0000005

  Exception offset: 0004 849 d

  OS version: 6.0.6001.2.1.0.272.7

  Locale ID: 1033

  Additional information 1: fd00

  More information 2: ea6f5fe8924aaa756324d57f87834160

  Additional information 3: fd00

  Additional information 4: ea6f5fe8924aaa756324d57f87834160

  Hello

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums:

  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

• How do I configure the iPad2 to synchronize the iPad-Mailclient with Exchange 2010 via Active Sync using the certificate SSL client and name of user and password?

  Active Sync iPad ssl Client certificate

  How do I configure the iPad2 to synchronize the iPad-Mailclient with Exchange 2010 via Active Sync using the certificate SSL client and name of user and password?

  Hi Ewoki,

  Your question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the TechNet Exchange forum. Please post your question in the Forums TechNet in Exchange Server.

• How to create and configure separate user accounts in Windows XP?

  I had my computer cleaned because of viruses, how create and configure user accounts separate?

  See if the article on the link below answers your question.

  http://support.Microsoft.com/kb/279783

• Locking down system and now get error 'Could not load the profile user and loading of temporary user account' when you try to open a session

  When my computer is on suddenly power went and my system also closed that crashed without logging my user account. now, I started my computer and I tried to open a session in my account (having only one user account) but he goes to the temporary login account, it displays "could not load the profile user and loading of temporary user account if you make changes to this user account it will be erased when you connect after." What can I do? How can I solve it? I use windows xp.

  Original title: Temp user login

  Hi indhru,

  1. Did you the latest changes on the computer?
  2. You have security software installed on the computer?

  Try the step after the connection to the temporary account below.

  1. Click on the Start menu.
  2. Type Regedit in the Run dialog box, and then press enter
  3. Access
     HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\ProfileList
  4. There is 1 line for each profile. Especially if a profile is bad there are 3 things worth visiting:
  • Make sure that the name of the key are not ends in ".bad".
  • Make sure the RefCount value is 0
  • Ensure that the status value is 0