Error trying to 'Number of lines to update' or 'display the data '.

Similar Questions

• How display the date of my last update of OSX in my Mac?

  How display the date of my last update of OSX in my Mac?

  If it was in the last 30 days, the updates will often (not always) show the Mac App store on your page of updates, under the heading "updates installed in the last 30 days.

• I get the error "on the volume C: default transaction resource manager encountered an error during startup and its metadata has been reset. The data contains the error code. »

  original title: NTFS problem
  Every 5 seconds, I get a warning (event ID 136) that says: "on the volume C: default transaction resource manager encountered an error during startup and its metadata has been reset. The data contains the error code. »

  Immediately followed by an error (event ID 137) that says "on the C: volume default transaction resource manager encountered a one-time error and could not start. The data contains the error code. »

  I am running windows 7 ultimate in any way to solve this problem?
  

  Hello

  This problem occurs if the Windows file system transaction log is damaged. The Windows file system uses the transaction log to retrieve the system transactions when a file error occurs. The system of common log (CLFS) transaction logs may be left in an inconsistent state. When the CLFS transaction logs are in an inconsistent state.
  To resolve this problem, delete the files .blf and .regtrans-ms in the folder % Windir%\System32\SMI\Store\Machine.
  After you restart the computer, the registry regenerates the deleted files. These regenerated files are in a consistent state.
  1. click on Start , type cmd in the Search box, and then click cmd in the list of programs .

  2. click on run as administratorand then click continue.
  If you are prompted for an administrator password or for confirmation, type the password, or click allow.

  3. at a command prompt, type the following command and press ENTER:
  fsutil resource setautoreset true c:\
  Note these steps assume that Windows is installed in the default location, drive C. If this is not the case, adjust the drive letter of the path of the folder to match your configuration.

  4 restart the computer.

  I hope this helps.

• Automatic updates program turned out impossible to turn it on, with error message "site has encountered a problem and cannot display the page you are trying to view.

  Original title: Auto updates

  My automatic updates program is disabled.  When I try to turn it on, I get this message "the site has encountered a problem and cannot display the page you are trying to view.  Automatic updates forever, why was off and why he now won't come back?

  Bill T

  E-mail address is removed from the privacy *.

  Hi Bill,

  This problem can be caused if the automatic updates service may be missing in the Services snap-in.

  1. is the Service Pack 3 installed on your computer?

  2. what anti-virus software you use in your computer?

  Follow the steps below:

  Method 1:

  To resolve this issue, follow these steps:

  1. Click Start, click run, type explore, and then click OK.
  2. Look for the following folder:

  %windir%\System32\inf

  Note The %windir%\System32 placeholder represents the path of the WINDOWS System folder. Typically, C:\WINDOWS is the path of the WINDOWS System folder.

  The inf folder is a hidden folder. To view the inf folder, follow these steps:

  a. on the Tools menu, click on Folder Optionsand then click the view tab.

  b. in the list of Advanced settings , click to display the hidden files and folders under hidden files and folders.

  c. click applyand then click OK.

  3. double-click on the inf folder, right-click in theand then click install.

  4. click on Browse. Look for, and then click the \ServicePackFiles\i386 %windir%\System32folder if the following conditions are met:

  • You install Windows XP SP3 from a CD Windows XP SP3 which included as part of the basic installation of SP3.
  • You have downloaded and installed Windows XP SP3 from the Microsoft Web site.
  • Windows XP SP3 was included with the computer.

  Note If the files from the Service Pack folder is not present on the computer, you can copy the files from a Windows XP SP3 slipstreamed installation CD.

  5. click OK to copy the files.

  6. change the setting on the computer to not display the hidden files and folders. To do this, follow these steps:

  1. On the Tools menu, click Folder Options, and then click the view tab.
  2. In the list of Advanced settings , click show not the hidden files and folders under hidden files and folders.
  3. Click applyand then click OK.

  7 restart the computer and check.

  Method 2:

  Follow the steps in the link below.

  You receive an error message "Windows Update has encountered an error and cannot display the requested page" when you try to install an update:

  http://support.Microsoft.com/kb/883614

  For reference:

  How to configure and use automatic updates in Windows:

  http://support.Microsoft.com/kb/306525

   

  If you need further assistance on this topic, let know us and we will be happy to help you.

• Mru error: ORA-20001: error in MRU: line = 1 current version of the data...

  Hi, I get this error msg
  
  Internal error in the routine mru: ORA-20001: error in MRU: line = 1, ORA-20001: ORA-20001: current version of the data in the database has changed since the user has launched the process of update. current checksum
  
  I'll try to show a picture of the form in which I can edit and add data
  When I use the wizzard that's fine with editing but I cant creat a new element because I insert my primary key and that shoud be done automatically.
  
  New on OK
  My PK is the first col1 and col2 second
  I got a drop-down list in which I choose an item in col1 to just display items in my form with this value, here is a possible results more
  No, I want to change until col4 col2
  or add a line with the same col1 col2 different and some values for col3 col4
  But if I add a line I want to insert col2 to until col4 (and the PK of col1 shoud be automatically insert in my list of dropwdown I chose before)
  I want to col2, a drop-down list
  so it all works very well I got all the changes I want, but when I try register or update my changes I got the error above frome
  I think the problem is the primary cause key thing I want to choose a part manually but I
  
  to get the new line u uses the line link add but I use rather after my statement select one
  Select Union: P62_PNR_VOll, null, null, null from double
  to get my first pk automatically of my item in the drop-down list (in my case: P62_PNR_VOLL)
  How can I solve this error?
  
  thx for your help
  
  regadrs
  Falk

  Hi Falk,

  I ask you if there is already data in the table. You said no. :D

  If you do not need the data, you can delete it. Otherwise, you will need to change your number sequence from 41 instead of 1.

  To change your dialing sequence, you must file the sequence and recreate it. Run these two statements, one at a time.

  DROP SEQUENCE "E_BEDARFSTRAEGER_ID_SEQ"
  

  CREATE SEQUENCE "E_BEDARFSTRAEGER_ID_SEQ" MINVALUE 41 MAXVALUE 99999999999999999999999 INCREMENT BY 1 START WITH 1 NOCACHE NOORDER NOCYCLE
  

  Sometimes the trigger can become invalid by doing this, if yes, just run the following again:

  ALTER TRIGGER "E_Bedarfstraeger_BI" ENABLE
  

  Andy

• There was an error Code Ox800710D9 when you try to update and install the Windows SP2

  I can't update Windows XP SP2 due to an Ox800710D9 error code.

  Hi frankhunt,

  Try these steps and check the result.
  Step 1: Stop the Cryptographic Service
  a. Click Start, click Run, type services.msc in the Open box and then click OK.
  b. in the Services dialog box, click Cryptographic Services, and then click Properties.
  c. in the cryptographic services properties dialog box, click the general tab and then click on stop.
  Option Service status changes to Stopped.

  Step 2: Remove the Windows Update.log files
  a. Click Start, click my computer and then double-click the hard disk where Windows XP is installed. For example, double-click the C drive.
  b. click the Folders box, click the Windows folder and then click the System32 folder.
  Note If you receive the following message appears, click Show the contents of this folder:
  "These files are hidden.
  This folder contains files that keeps your system works correctly.
  You should not change its content. »
  c. click on / open the CatRoot2 folder.
  d. remove the Edbxxxxx.log file.
  Note: In this step, xxxxx is a placeholder that can represent any combination of letters and numbers, numbers or letters.
  e. Click Start, click my computer and then double-click the hard disk where Windows XP is installed. For example, double-click the C drive.
  f. click the Folders box, click the Windows folder and then click the Security folder.
  Delete the file Edbxxxxx.log.
  Note: In this step, xxxxx is a placeholder that can represent any combination of letters and numbers, numbers or letters.

  Step 3: Start the Cryptographic Service
  a. Click Start, click Run, type services.msc in the Open box and then click OK.
  b. in the Services dialog box, click Cryptographic Services, and then click Properties.
  c. in the cryptographic services properties dialog box, click the general tab and then click Start.
  The service status option changes Started.

  Step 4: Install the service pack
  a. visit the Windows Update Web site to update the computer to Windows XP SP2: http://windowsupdate.microsoft.com
  b. install the update and check the result.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Get the number of lines to different tables on the same line

  How can I get the number of lines for the different tables in a single line:
  
  SELECT count (A), count (B), count (C) table tb_a A, tb_b B, tb_c C;
  
  Thank you!

  Maybe if you want a little sophisticated look ;)

  select *
    from (select 'a' tbl_name,count(*) cnt
            from table_a
          union all
          select 'b' tbl_name,count(*) cnt
            from table_b
          union all
          select 'c' tbl_name,count(*) cnt
            from table_c
         )
   pivot (max(cnt) kount for tbl_name in ('a' as tbl_a,'b' as tbl_b,'c' as tbl_c))
  

  Concerning

  Etbin

• 404.2 error trying to use index.cfm as default page in the directory

  Hello

  Here's my server

  -Windows 2008 Server R2 Ent

  -IIS 7.5

  -10 ColdFusion

  CF10 installation ran smoothly, that the wsconfig seems to have created all the necessary stuffs:

  ISAPI filter: tomcat C:\ColdFusion10\config\wsconfig\1\isapi_redirect.dll

  Authorized ISAPI restriction: tomcat_all C:\ColdFusion10\config\wsconfig\1\isapi_redirect.dll

  index.cfm added in the Document by default, placed first in the upwards in the list

  CFIDE, virtual directories jakarta created, etc...

  Everything works ok EXCEPT that IIS is unable to Server index.cfm as default directory page:

  -This results in an error: http://www.example.com/ (to simplify, index.cfm is the only page in the root directory)

  -an error and serve the index.cfm page correctly: http://www.example.com/index.cfm

  Error 404.2 spoke (in french)

  'The page you requested is not found because of the list of ISAPI and CGI Web Server restrictions settings."'

  I don't see anything special in the settings of the ISAPI/CGI restrictions, they are still the same as on the dev server, that is not the problem...

  I tried to delete the connectors using wsconfig and then re-launch to reinstall connectors, without success.

  Any help is appreciated as I am out of ideas...

  Thank you.

  Yes, no surprise.  Well, all I found for this error discussed the option of ISAPI and CGI restrictions in IIS.  The error itself indicates the same - "HTTP error 404.2 - not found the page you request cannot be served because of the settings of the ISAPI and CGI restrictions list on the Web server.

  Are you sure that the settings that are the same on both servers AND that they are the same on both servers activated?

  I realize that it works when you specify index.cfm but that error tells you that the ISAPI and CGI parameters are not correct.  Otherwise, it would be just a normal 404.  Right?

• Retrieve data based on max (date of update) less then the date of the order

  I would try to explain my scenario with an example. Please help me write a query for this scenario
  
  Table1 (rate of Destination)
  
  City | Rental | UpdateDate
  ABC | 200 | 1 August
  def | 300. 2 August
  IGS | 400. 3 August
  ABC | 250. 4 August
  def | 350. 5 August
  IGS | 450. August 6
  ABC | 300. 8 August
  def | 400. 8 August
  IGS | 500 | 8 August
  
  
  Table2 (order details)
  
  Order No. DriverID | ORDER_DATE | City
  123456 | drv123 | 3rdAugust | ABC
  123457 | drv123 | 9thAugust | ABC
  123458 | drv123 | 5thAugust | ABC
  123459 | drv123 | 6thAugust | IGS
  123460 | drv200 | 9thAugust | def
  
  
  
  Now I want to interview arrested by driver ID in a way that inspires order_date he should find the Max (update_date) < = order_date
  
  
  I want that the following output for driverID = drv123
  
  DriverID | Order No. OrderDate. City | Rate
  drv123 | 123456 | 3rdAugust | ABC | 200
  drv123 | 123457 | 9thAugust | ABC | 300
  drv123 | 123458 | 5thAugust | ABC | 250
  drv123 | 123459 | 5thAugust | IGS | 450
  
  
  Posting on a forum for the first time. Sorry if I didn't follow the rules of display it correctly.

  Hello

  Welcome to the forum!

  Whenever you ask a question, please post CREATE TABLE and INSERT statements for your sample data. In this way, people who want to help you can recreate the problem test their ideas.
  Since it's your first thread, I'll do it for you:

  CREATE TABLE     destination_rates
  (     city          VARCHAR2 (10)
  ,     rent          NUMBER (6)
  ,     update_date     DATE
  );
  
  INSERT INTO destination_rates (city, rent, update_date) VALUES (
  INSERT INTO destination_rates (city, rent, update_date) VALUES ('abc', 200, DATE '2011-08-01');
  INSERT INTO destination_rates (city, rent, update_date) VALUES ('def', 300, DATE '2011-08-02')'
  INSERT INTO destination_rates (city, rent, update_date) VALUES ('ghi', 400, DATE '2011-08-03');
  INSERT INTO destination_rates (city, rent, update_date) VALUES ('abc', 250, DATE '2011-08-04');
  INSERT INTO destination_rates (city, rent, update_date) VALUES ('def', 350, DATE '2011-08-05');
  INSERT INTO destination_rates (city, rent, update_date) VALUES ('ghi', 450, DATE '2011-08-06');
  INSERT INTO destination_rates (city, rent, update_date) VALUES ('abc', 300, DATE '2011-08-08');
  INSERT INTO destination_rates (city, rent, update_date) VALUES ('def', 400, DATE '2011-08-09');
  INSERT INTO destination_rates (city, rent, update_date) VALUES ('ghi', 500, DATE '2011-08-09');
  
  CREATE TABLE     order_details
  (     order_num     NUMBER (10)     PRIMARY KEY
  ,     driver_id     VARCHAR2 (10)
  ,     order_date     DATE
  ,     city          VARCHAR2 (10)
  );
  
  INSERT INTO order_details (order_num, driver_id, order_date, city) VALUES (123456, 'drv123', DATE '2011-08-03', 'abc');
  INSERT INTO order_details (order_num, driver_id, order_date, city) VALUES (123457, 'drv123', DATE '2011-08-09', 'abc');
  INSERT INTO order_details (order_num, driver_id, order_date, city) VALUES (123458, 'drv123', DATE '2011-08-05', 'abc');
  INSERT INTO order_details (order_num, driver_id, order_date, city) VALUES (123459, 'drv123', DATE '2011-08-06', 'ghi');
  INSERT INTO order_details (order_num, driver_id, order_date, city) VALUES (123460, 'drv200', DATE '2011-08-09', 'def');
  
  COMMIT;
  

  In addition, explain how you get the desired results according to the data that you have published, giving specific examples.

  A way to get the results you want is a Query of Top_N , where you join each line of order_datails to all destination_rates who could possibly be the newest one and then use the analytical GRADE or ROW_NUMBER fucntion to find only the most recent for each order_detail lines:

  WITH     got_r_num     AS
  (
       SELECT     od.driver_id, od.order_num, od.order_date, od.city, dr.rent
       ,     RANK () OVER ( PARTITION BY  od.order_num
                        ORDER BY      dr.update_date     DESC
                      )     AS r_num
       FROM     destination_rates     dr
       JOIN     order_details          od  ON     od.city           = dr.city
                              AND     od.order_date     >= dr.update_date
       WHERE     od.driver_id     = 'drv123'
  )
  SELECT       driver_id
  ,        order_num
  ,       order_date
  ,       city
  ,       rent          AS rate
  FROM       got_r_num
  WHERE       r_num     = 1
  ORDER BY  order_num
  ;
  

  Output:

  DRIVER_ID   ORDER_NUM ORDER_DATE      CITY             RATE
  ---------- ---------- --------------- ---------- ----------
  drv123         123456 3rd August      abc               200
  drv123         123457 9th August      abc               300
  drv123         123458 5th August      abc               250
  drv123         123459 6th August      ghi               450
  

• Form based on a Table, only updated authorized, form does not display the data

  Hello
  
  I created a form based on a Table by the corresponding wizzard. The table has only one line. The shape didn't create or delete buttons, only update & Cancel is allowed. The PK (id field) is hidden and it takes the value of a database trigger when insert (in fact never is apllied because there is no Create).
  
  When the form is called it is already displayed in update mode, with cancel button allowed but not data in the fields. Line seems ok, session data available null to variables/positions. No idea why this is happenning? I expect to HAV the data in the form fields.
  
  TIA

  Hello

  Your primary key item have no value, I guess.
  Create calculations to set the value of the item that is in this single line in your table

  BR, Jari

• Date of the library do not change not updated to display the previously modified registered work today.

  In Windows 7, in libraries, when I changed a Word document created previously and save it, the document library area does not appear in the documents of today. Even if I sort by modified Date, it still shows that in its original day created. Is this a bug or a feature disabled? It is adjustable to display any work changed in todays list of files?

  Hi DaleAnderson,

   

  You need to navigate Documents in libraries and click Update to organize the last edited files or click on the arrow down and uncheck the boxes long ago and today and check if it helps you.

  Follow the steps described in the links below.

  Management of your documents:

  http://Windows.Microsoft.com/en-in/Windows7/managing-your-documents

   

  For all windows questions do not hesitate to contact us and we will be happy to help you.

• How to replace the subject line of enamel subimitted with the data filled in?

  Hello

  I have created a simple form using adobe acrobat X standard Presentation. The user submits the form by using the "submit" button that sends the form. All users have adobe acrobat X standard is installed on their computer. I have a text field in my report entitled "project title" and that the user will write the name of the project in front of it. I want this project name appear in the subject line of the email. How do I do that? What javascript to use?

  I found this example that does exactly what I'm looking for. But I do not know how to display the use of java code. http://forums.Adobe.com/thread/462681

  Any help would be appreciated.

  Thank you

  Sandeep

  I changed this.mailform of this.mailDoc and that solved the problem. Thanks anyway.

• Error trying to run load test on OATS by using the command line

  Get the trial below the error message when you attempt to run the command line to start the OATS.

  log4j: WARN no appenders could be found for logger (oracle.oats.server.jndi.JndiL
  ookup).
  log4j: WARN Please initialize log4j correctly system.
  log4j: WARN see http://logging.apache.org/log4j/1.2/faq.html#noconfig to learn more
  FO.
  Error of initialization of the connection of the controller of t3://rws21410019.us.oracle.com:8088/
  weblogic\n\n (message id = ctl.initError)
  oracle.oats.client.controller.ControllerException: initialization of the error controller
  connection to t3://rws21410019.us.oracle.com:8088/weblogic\n\n (message id = ctl.i
  nitError)
  to oracle.oats.app.controller.client.ControllerClient.initController (Con
  trollerClient.java:268)
  to oracle.oats.app.controller.client.ControllerSyncedClient. < init > (control
  ollerSyncedClient.java:137)
  to oracle.oats.app.controller.client.OltCommandLine. < init > (OltCommandLin
  e.Java:43)
  at oracle.oats.client.CommandLine.initController(CommandLine.java:748)
  at oracle.oats.client.CommandLine.run(CommandLine.java:179)
  at oracle.oats.client.CommandLine.main(CommandLine.java:61)
  Related: javax.naming.AuthenticationException [root exception is java.lang.Sec
  [urityException: user: weblogic, could not be authenticated.]
  to weblogic.jndi.internal.ExceptionTranslator.toNamingException (Exceptio
  nTranslator.java:42)
  at weblogic.jndi.WLInitialContextFactoryDelegate.toNamingException (WLIni
  tialContextFactoryDelegate.java:788)
  at weblogic.jndi.WLInitialContextFactoryDelegate.pushSubject (WLInitialCo
  ntextFactoryDelegate.java:682)
  at weblogic.jndi.WLInitialContextFactoryDelegate.newContext (WLInitialCon
  textFactoryDelegate.java:469)
  at weblogic.jndi.WLInitialContextFactoryDelegate.getInitialContext (WLIni
  tialContextFactoryDelegate.java:376)
  at weblogic.jndi.Environment.getContext(Environment.java:315)
  at weblogic.jndi.Environment.getContext(Environment.java:285)
  at weblogic.jndi.WLInitialContextFactory.getInitialContext (WLInitialCont
  extFactory.java:117)
  at javax.naming.spi.NamingManager.getInitialContext (unknown Source)
  at javax.naming.InitialContext.getDefaultInitCtx (unknown Source)
  at javax.naming.InitialContext.init (unknown Source)
  to javax.naming.InitialContext. < init >(Unknown Source)
  at oracle.oats.server.jndi.JndiLookup.createInitialContextInternal (exercise
  WN Source)
  at oracle.oats.server.jndi.JndiLookup.createInitialContext (unknown source
  (e)
  at oracle.oats.server.jndi.JndiLookup.createInitialContext (unknown source
  (e)
  at oracle.oats.app.session.SessionClient.initSession(SessionClient.java:)
  104)
  to oracle.oats.app.controller.client.ControllerClient.initController (Con
  trollerClient.java:262)
  ... 5 more
  Caused by: java.lang.SecurityException: user: weblogic, couldn't be Authenticate
  Ed.
  at weblogic.common.internal.RMIBootServiceImpl.authenticate (RMIBootServi
  ceImpl.java:116)
  at weblogic.common.internal.RMIBootServiceImpl_WLSkel.invoke (unknown Sou
  NCE)
  at weblogic.rmi.internal.BasicServerRef.invoke(BasicServerRef.java:667)
  to weblogic.rmi.internal.BasicServerRef$ 1.run(BasicServerRef.java:522)
  to weblogic.security.acl.internal.AuthenticatedSubject.doAs (Authenticate
  dSubject.java:363)
  at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:)
  146.)
  at weblogic.rmi.internal.BasicServerRef.handleRequest (BasicServerRef.jav
  one: 518)
  at weblogic.rmi.internal.wls.WLSExecuteRequest.run (WLSExecuteRequest.jav
  one: 118)
  at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
  at weblogic.work.ExecuteThread.run(ExecuteThread.java:178)

  Please make sure that the BTA server is running!

  Thank you

  This problem has been resolved after changing the user name for "oats", this is the user name of the weblogic server and not the console of OATS.

• The console of Windows Server Update Services (WSUS) falls down when you search for updates and displays the following error message:

  An unexpected error has occurred.
  Click the node server reset to try to connect to the server again

  Event type: error
  Event source: Windows Server Update Services
  Event category: no
  Event ID: 7053
  Date:
  Time:
  User: n/a
  Computer:
  Description: The WSUS administration console has encountered an unexpected error. Maybe it's a transient error; try to restart the administration console.
  Cause
  This can happen if the application cache is damaged.

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• Product number: G0T59AV: problem with updating software via the hp support assistant

  Hi guys

  When I check for updates via HSA he says there is no update, but I know there are a lot of pilots I have shoud update. I uninstalled HSA completely one re-installed but not feel. Is there anyway to fix it.

  Best regards

  Hello

  It can be updated for you in the backgroung already. If you wish, you can manually check the Device Manager to see the version. New dates don't mean new versions.

  Kind regards.