iPhone 5 s guard closure
My iPhone 5 guard stop and will only work when it is connected to the mains. It seems to be fully charged, but when I unplug it, it stops after a few seconds and the display shows the low battery red image. I tried a backup, reset and restore but that did not work.
According to the age and use of the phone, you will need to get the battery replaced by Apple or an Apple authorized service provider.
Find an Apple authorized service provider
Apple iPhone - contact Support - support
Out of warranty repair service
If your repair is not covered by Apple limited one-year AppleCare warranty + or AppleCare Protection Plan, your iPhone may be eligible for out-of-warranty service. For example, the liquid damage is not covered by the warranty, but may be eligible for out-of-warranty service. Some damage is not eligible, for example, if your device has been broken into several pieces. See the terms of repair of Apple and Conditions for more details.
Read the terms of Apple repair
Model Out-of-warranty service fee Battery service * iPhone 6 s more, iPhone 6 Plus $329 $79
* available only if battery
Apple diagnostic test failureiPhone iPhone 6s 6 $299 iPhone 5, iPhone 5, iPhone 5 $269 iPhone 4S $199 iPhone 4, iPhone 3GS, iPhone 3G $149 In addition, a $6.95 shipping charges if necessary. Fees are in US Dollars and exclude tax. The price is for the service through Apple. The final service charge we charge will be determined during the tests and may be less than the costs of service above. Pricing and terms vary for the service by an Apple authorized service provider.
copied from: answer Service Center - iPhone
Tags: iPhone
Similar Questions
-
My iphone 6 with guard inviting 'storage almosy full' even if I deleted a lot of apps
My iphone with inviting Guard 6 'almost complete storage"& enter '0 bytes available', even if I deleted a lot of apps, photos & videos. Could someone advise me on how to fix this please.
I am facing the same issue! Something went wrong and I get this message! It started 2 days ago and I was deleting since then with no luck! It continues to work for some reason any!
I really hope something happens soon!
-
iPhone 6s more guard move to 2.4 g wifi
Hi, my husband and I just got new iPhone more 6 seconds. My phone still connected to our 5g wifi channel. However, his move to 2.4 g. Is there some settings that it needs to change or the faulty phone? I checked our settings and both of our phones are configured in the same way. I would appreciate any guidance anyone can give me.
Thank you very much.
The iPhone will select the best available network, not the highest frequency one. Disable 2.4 G network if you want to force the use of 5G, but why you want the worst network at your disposal is beyond me.
-
Laptop Windows Vista guard closure
Original title: my cell phone stupid
My laptop (Dell, Windows Vista professional) guard stop on me and I don't know why. I don't play any games or anything like that. I mainly use it for school work and other research. I really don't understand what is happening. And by stopping, I mean the screen will turn black and yet my fan and all the rest is still running. I really need help with this, because this laptop has last me quite a while.
Hello
Check with Support from Dell, their online documentation and drivers, diagnostics and ask
forums about known problems.Dell support
http://support.Dell.com/Dell support drivers - product manual & warranty Info (left side) - and much more
http://support.Dell.com/support/index.aspx?c=us&l=en&s=DHSDell forums
http://en.community.Dell.com/forums/Dell PC Diagnostics
http://www.Dell.com/support/Diagnostics/us/en/19/
===========================================================These methods should help you troubleshoot:
What to do if Windows does not start correctly
http://Windows.Microsoft.com/en-us/Windows-Vista/what-to-do-if-Windows-wont-start-correctlyMore troubleshooting:
Use the startup clean and other methods to try to determine the cause of and eliminate
the questions.---------------------------------------------------------------
What antivirus/antispyware/security products do you have on the machine? Be one you have NEVER
on this machine, including those you have uninstalled (they leave leftovers behind which can cause
strange problems).----------------------------------------------------
Follow these steps:
Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN
Enter this at the command prompt - sfc/scannow
How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
generates in Windows Vista cbs.log
http://support.Microsoft.com/kb/928228Also run CheckDisk, so we cannot exclude as much as possible of the corruption.
How to run the check disk at startup in Vista
http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html==========================================
After the foregoing:
How to troubleshoot a problem by performing a clean boot in Windows Vista
http://support.Microsoft.com/kb/929135
How to troubleshoot performance issues in Windows Vista
http://support.Microsoft.com/kb/950685Optimize the performance of Microsoft Windows Vista
http://support.Microsoft.com/kb/959062
To see everything that is in charge of startup - wait a few minutes with nothing to do - then right-click
Taskbar - the Task Manager process - take a look at stored by - Services - this is a quick way
reference (if you have a small box at the bottom left - show for all users, then check that).How to check and change Vista startup programs
http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.htmlA quick check to see that load method 2 is - using MSCONFIG then put a list of
those here.
--------------------------------------------------------------------Tools that should help you:
Process Explorer - free - find out which files, key of registry and other objects processes have opened.
What DLLs they have loaded and more. This exceptionally effective utility will show you even who has
each process.
http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspxAutoruns - free - see what programs are configured to start automatically when you start your system
and you log in. Autoruns also shows you the full list of registry and file locations where applications can
Configure auto-start settings.
http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
Process Monitor - Free - monitor the system files, registry, process, thread and DLL real-time activity.
http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspxThere are many excellent free tools from Sysinternals
http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx-Free - WhatsInStartUP this utility displays the list of all applications that are loaded automatically
When Windows starts. For each request, the following information is displayed: Type of startup (registry/Startup folder), Command - Line String, the product name, Version of the file, the name of the company;
Location in the registry or the file system and more. It allows you to easily disable or remove unwanted
a program that runs in your Windows startup.
http://www.NirSoft.NET/utils/what_run_in_startup.htmlThere are many excellent free tools to NirSoft
http://www.NirSoft.NET/utils/index.htmlWindow Watcher - free - do you know what is running on your computer? Maybe not. The window
Watcher says it all, reporting of any window created by running programs, if the window
is visible or not.
http://www.KarenWare.com/PowerTools/ptwinwatch.aspMany excellent free tools and an excellent newsletter at Karenware
http://www.KarenWare.com/===========================================
Vista and Windows 7 updated drivers love then here's how update the most important.
This is my generic how updates of appropriate driver:
This utility, it is easy see which versions are loaded: run DrirveView - set the VIEW to hide
Microsoft drivers - update those without drain in their names. (Also update BIOS and)drivers chipset on the site of the constructor/the system motherboard.)
-Free - DriverView utility displays the list of all device drivers currently loaded on your system.
For each driver in the list, additional useful information is displayed: load address of the driver,
Description, version, product name, company that created the driver and more.
http://www.NirSoft.NET/utils/DriverView.htmlFor drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
Control Panel - device - Graphics Manager - note the brand and complete model
your video card - double - tab of the driver - write version information. Now, click on update
Driver (this can do nothing as MS is far behind the certification of drivers) - then right-click.
Uninstall - REBOOT it will refresh the driver stack.Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
with their own software and drivers and all other main drivers that you have.Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
BIOS, Chipset and software updates on the site of the manufacturer of the system here.)Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
each installation.Always check in the Device Manager - drivers tab to be sure the version you actually install
presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
in particular that) so to install a driver - reboot - check that it is installed and repeat as
necessary.Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
manually by model.Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htmHow to install a device driver in Vista Device Manager
http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.htmlIf you update the drivers manually, then it's a good idea to disable the facilities of driver under Windows
Updates, that leaves about Windows updates but it will not install the drivers that will be generally
older and cause problems. If updates offers a new driver and then HIDE it (right click on it), then
get new manually if you wish.How to disable automatic driver Installation in Windows Vista - drivers
http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx===========================================
Refer to these discussions because many more excellent advice however don't forget to check your antivirus
programs, the main drivers and BIOS update and also solve the problems with the cleanboot method
first.Problems with the overall speed of the system and performance
http://support.Microsoft.com/GP/slow_windows_performance/en-usPerformance and Maintenance Tips
http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/19e5d6c3-BF07-49ac-a2fa-6718c988f125Explorer Windows stopped working
http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/6ab02526-5071-4DCC-895F-d90202bad8b3 I hope this helps.Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="">-><- mark="" twain="" said="" it="">->
-
iPhone 6 s Guard put out of service to remaining battery life
Hi, I have a problem with my iphone6s stopping completely sometimes when there are nearly 20% and most of the time around 10%.
When I press the home button it displays the icon of battery empy as if its drained completely. As soon as I plug to recharge the phone starts again and displays the amount of battery as when he died. This seems to happen more. Hope that makes sense. Have tried to reset.
Yes at one point under autonomy 20% of the load, the device will begin to close. It behaves as designed to prevent damage to it. In a pinch, you can switch to low power Mode (settings app > power low battery Mode), but this will buy you some time. The solution to recharge.
-
XP guard closure - everything opens in a small window
I had to re install Windows XP on my second computer private. The hand PC is 8.1. Now, after a short period of inactivity, it goes back to the user account page. Sometimes even goes to an empty view of the desktop. Next issue, that's all what I click on opens in a small screen. I looked everywhere in the Panel and have searched this site without success. (For those of you who assume that we do not try to find the answer on our own.) "It seems that I have to add this comment.) XP used to stay here where I did and windows used to open in full screen. There must be a way to get there. She's just completely eluding me. Help, please. Terry
I found the answer on my own.
-
Acer Aspire Z5761-E4532 guard closure
If randomly! .. has been constantly closing day, did not hear the fan turns, now the fan works again but so hard!
We suggest to contact technical support in your region for further assistance in this matter.
Acer Service & support -
Reference Dell inspiron 660 s guard closure
My 660 s relatively new Inspiron keeps hutting down by itself - if I try to print it stops down, if I have access to my videos it stops. Sometimes she just stops unless I try to access anything whatsoever. Can anyone help? Please e-mail me - it's too recent to have problems...
Hi Keith,
We need after the details.(1) don't you make changes to your computer's power settings prior to this problem?
(2) do you have any third-party security software or antivirus installed on your computer?Follow the troubleshooting methods listed here.Method 1: Run the troubleshooter of power.Follow the steps below:
(a) press Windows + W together.
(b) writing Troubleshooting in the search to the corner box and press on enter.
(c) click the Troubleshooting tab.
(d) click the option all view in the upper left corner.
(e) select the options power from the list.
(f) click Next to launch the troubleshooter of power.Method 2: Analyze and run Windows Defender in offline mode.
Start your computer in safe mode and then run the analysis.With the parameters of Windows startup screen (formerly advanced startup options), you can start Windows in different advanced troubleshooting modes, so you can find and fix problems on your PC.Please follow the steps in the link below to your computer in safe mode.Windows Defender offline can help eliminate these hard to find malicious and potentially unwanted programs using definitions that recognize the threats. Download the appropriate file depending on the version of bits in your computer.What is Windows Defender in offline mode?
http://Windows.Microsoft.com/en-GB/Windows/what-is-Windows-Defender-offline
Important: during the analysis of the disk hard if bad sectors are found, the parser attempts to repair this area, all available on which data may be lost.
If the problem persists then, I suggest you please contact the manufacturer that it might be a hardware problem.You can contact then here.Write to us if you're still having problems. We will help you. -
iPhone 6 more hang freeze issues
My iPhone 6 more guard suspended (gel) for the past 6 months, I have to reset the whole phone sometimes up to 2 times just to get it to work again. Been a loyal (including my entire family) custome since gen 1 iPhone, iPad, mac book. Am really disappointed with the quality now. Did not bring to the service center since the first day of the problem because I thought that was just a few bugs & was sure that apple will fix it, but after many update of iOS so far, the pesisit still problem.
iPhone is more quality I've known, hope apple can fix this problem before finally losing the most loyal customers
Hello BennyFoo,
Thank you for bringing your iPhone freeze questions here for Apple Support communities. I understand how it is important to have a reliable phone. I'm happy to check this with you.
The first thing we want to make sure that all of your data on your device is safe. You can perform a backup in iCloud or iTunes using this article: backing up your iPhone, iPad, and iPod touch.
Once your data is safe, try to turn off your device, then again on the March. Sometimes, that's all that is needed for connections reset and everything working properly again. This article help from Apple will help you to do: restart your iPad, iPhone or iPod touch. If you are still having issues, try force reset then. It is designed to be used when the iPhone does not respond, and it looks to be the exact symptoms that you are experiencing right now.
If you still experience the same problems after reboot, please try to restore your device from a backup by using this article help: restore your iPhone, iPad or iPod touch from a backup. If you don't have a current backup, please try this help article: If you can not update or restore your iPhone, iPad, or iPod touch. Please pay close attention when you get to step 4 who said "when you see the option restore or put to update, choose update. iTunes will try to reinstall iOS without erasing your data. "to get your iOS reinstalled. Test if the issue is still ongoing.
Thanks again and have a great rest of your day.
-
iPhone 6 more Bluetooth keeps disconnecting
Since last week, my iPhone 6 with guard disconnect from my car. My never had no problem before that - works perfectly fine for over a year... Currently on iOS 9.3.1. Were also of the view that during the phone became unresponsive when you go to applications, settings, etc..
Remedies?
Thank you
< published by host >
I also have this problem with my iPhone 5 but not with my 6 s more.
I usually go to Bluetooth in settings and try to disconnect and connect to Bluetooth.
Before turning on Bluetooth play a song in the music player & turn on Bluetooth and connect the phone
These works of methods for me!
-
FaceTime incoming calls ring my laptop and iPhone
I have set up on my MacBook Pro of FaceTime. I installed on my iPhone of FaceTime.
Pretty much any incoming call on my iPhone sounds too my MBP. When I answer the iPhone the MBP guard sounds.
I don't mind the two sounds, but how I put it up until the MBP stop ringing when I answer to the iPhone?
Thank you for treating me as a technoturkey. Use short words and phrases
iPhone 4 s, iOS 9.3.1
He shouldn't continue, when I get a call two iMacs, ring of iPad and iPhone and all stop when I answer
-
My iPhone 6 s guard advising me these last two days that my storage is almost full. With a threat to lock me up on whatsapp (that must be running at least 100 MB), I decided to delete the photos, applications etc off the coast (including the deletion of recently deleted photo and video album). Now, I've deleted almost every thing off my phone, including those that I have used before and my storage space is still telling me that I am using 11.4 GB of space, when before you delete it told me that I was using only 11.0 GB of space. Yesterday I backed up everything to iCloud and reset the content and settings when she returned on storage showed I was using only 3.2.GB my 16 GB phone. But today, I am faced with the same question that my storage is returned up to 11.4 GB without me to add photos, videos or apps on the phone at night. Does anyone else have this problem, how do solve you this problem, is something to do with Apple? Year last December when I bought the phone, I lost a lot of contacts via backup and now this iCloud. What the * happens?
Suggest you remove WhatsApp, it poses many problems of storage for many users. The last update has a bug and WhapsApp has yet to fix it. Do not re-install it until it is resolved. Good luck.
-
My iPhone 5 guard by clicking on things at random, by clicking on the things im not clicking on and freeze momentarily. But the screen is not cracked
You should go to the apple store and ask them to check it for you! You may have a faulty screen or faulty motherboard! in any case it is best to call or go to the apple store
-
iPhone 6 + guard passing phone calls
Since last week, my iPhone 6 + guard drop in phone calls. And a few times when I call back it will ring once and then down the call once again. Should I take my SIM card to clean or?
Hello bhetherington7,
Thank you for using communities of Apple Support.
I see that you are having problems with your iPhone dropping calls. Take a look at the following article to get suggestions to try for that matter. Some steps are not applicable to your particular issue, as turn airplane mode on/off or check the settings for do not disturb. Most of the others are, like updates, removal/reinsert the SIM and communicating with the carrier.
If you can not make or receive calls on your iPhone
Best regards.
-
A case with a magnetic closure shut down an iPhone?
Hello
I have an iPhone 6 s more. I am not satisfied with its battery life. I read that a case with a magnetic closure turns off the phone when it is closed. I would like to know if anyone has such a case, and that it is the phone off to conserve battery power.
If not then I'll have to go to some form of extended battery pack, but there will be another question.
Thank you, in advance.
rlmslo
I have not heard of these cases. Beside this, turn your phone off and back on every time that you open the case a) will affect your battery life b) make you expect about minutes whenever you want to check your email. Not very practical.
There are a lot of battery boxes, choose the one you prefer.
Here are a few tips battery:
http://www.IMore.com/battery-life-problems-iOS-9-heres-fix
Maybe you are looking for
-
I'm not a COMPUTER expert. I get: "mime or video format type is not supported" as a message on a webcam live feed Web site: chaturbate. What should I download to fix this problem? Thank you Collin
-
How can failed Realtek RTL8139 network card I download another
my card network Realtek RTL8139 failed, how can I download another
-
need help! How to open a folder via web browser
Hi all LV'ers. as indicated in the subject, I try to find a way to display the shared folder w / in the network of the company via web browser. is this possible? is there an easier way? I never been used FTP vi before any other vi or to deal with thi
-
Change theme App programmatically?
Hello guys,. Is it possible to change the theme of the app (light or dark) during the execution of app (running). Thank you
-
SD cards are not matched RAID-1
Hello I just start a new C220M3 with 2 SD cards. Right now, I can't use the SD card because I have the following status: "SD cards are not matched to RAID-1. I don't want to use RAID-1 SD card to install ESXi. The MMIC version is 1.5 (3d) Help, pleas