error using sampleNearest and sampleLinear

Similar Questions

• can someone tell me why I get an error of iw3mp.exe when you use Skype and games?

  While using Skype and play a game online, I always get an error of iw3mp.exe. I have uninstalled and reinstalled my sound card and it works for awhile, but the error then begins again.

  http://www.Google.com/search?q=iw3mp.exe+ERRO&ie=UTF-8

• External hard drive suddenly cannot open it give the message error "you must format the disk in the drive until you can use it", and your hard disk is 0 bytes

  External hard drive can not suddenly open - fixed

  my external hard drive worked very well all the time, but suddenly I can't open it more, when I tried to open it, it gives the error message "You must format the disk in the drive until you can use it" and my hard drive is 0 bytes, average there is no file in the hard drive. Average, all the data inside hard disk are gone!

  Hello muhammad.

  Before you do anything with this player, you can search online for some data recovery utilities so that you can try to recover your data.

  What operating system do you use?

  Have you tried running chkdsk on the drive?

  Let us know.

  Best regards

  Matthew_Ha

• When I use Hotmail and try to attach a document to send by email, I get a message error that says 'attachment Id has wrong format", and if the message will not be sent.

  The attachment ID has wrong format.

  When I use Hotmail and try to attach a document to send by email, I get a message error that says 'attachment Id has wrong format", and if the message will not be sent.

  I have had absolutely no problem in electronic documents before sending.

  Please help, thanks.

  Hello KerJJ,

  The best place to ask your question of Windows Live is inside Windows Live help forums. Experts specialize in all things, Windows Live, and would be delighted to help you with your questions. Please choose a product below to be redirected to the appropriate community:

  Windows Live Mail

  Windows Live Hotmail

  Windows Live Messenger

  Looking for a different product to Windows Live? Visit the home page Windows Live Help for the complete list of Windows Live forums to www.windowslivehelp.com.

• MSN - CRASH - TECH MSN TOLD - not able to use msn and I get a msg in the event viewer that the error is NTDLL. DLL

  MSN TECH SAID TELL WINDOWS CE PROBLEM I am STICK - not able to use msn and I get a msg in the event viewer that the error is NTDLL. DLL and talked with msn. Called MSN windows Dept. -How can I correct this situation?

  Hello

  Did you change your computer?

  Method 1:

  I suggest you perform the clean boot and check.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: After a repair, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

  Method 2:

  I also suggest you to follow the link and check.

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

• 1001 error code in the registry when you try to remove an old program using programs and features in Control Panel. How can I fix?

  1001 error code in the registry when you try to remove an old program using programs and features in Control Panel.  How can I fix?

  Computer Windows 7

  Tried to reinstall the older version, she received error 1001 something again with the registry.   Does not remove old software.

  Hi Carol,

  1. what program or software you are trying to delete?

  2. What is the code or an exact error message?

  Please provide us with more information on the specific question, to find a solution as soon as possible.

  Follow the link below and check them with the question:

  Solve problems with programs that cannot be installed or uninstalled:

  http://support.Microsoft.com/mats/Program_Install_and_Uninstall/

   

  I hope this helps.

• Using a Mac OSX updated 10.9.5, to update to the latest update of Lightroom, now get error - Lightroom met permission issues. Click on fix - cannot fix. You click on read more and I tried all the solutions. Always error. Uninstalled and reinstalled - alwa

  Using a Mac OSX updated 10.9.5, to update to the latest update of Lightroom, now get error - Lightroom met permission issues. Click on fix - cannot fix. You click on read more and I tried all the solutions. Always error. Uninstalled and reinstalled - always error.  Cannot set up a new admin on Gov't computer user. Help

  Please make sure that you gave permission for the folders listed in the article, follow these steps.

  1 - give read and write permissions for the Application Support folder and preferably on User Library and the secret library.

  2 - Add user and admin both permissions.

  When you open the Get Info option for specific folder.

  Make sure you click on '+' symbol, it will open the list of user accounts. Add currently logged in user account and Director of user account, if it is not added.

  Both must have read and write to prevent access these some questions in the future.

  Important:

  Once you added as currently logged on user account and administrator user accounts and provided access for reading and writing.

  Make sure you click on the gear icon and select apply to closed.

  Lock dialog box and close the Get Info .

  So that all the folders in the folder Adobe will get read and write access.

  

  Let us know if this helps

  ~ Assani

• Can't get Shockwave to download using IE11 and get errors during download on Chrome... any suggestions?

  My daughter has a chemistry assignment that has a simulation using the Shockwave Player.  Repeatedly, I uninstalled and installed using IE11 and Chrome.  I am sent to the download page for Adobe for 64-bit whenever I'll use IE11... even though I followed the instructions from Adobe regarding ensuring that I use 32-bit.  Attached are the errors I get when downloading Chrome.  Any suggestions would be greatly appreciated.

  

  You have administrator privileges under the account you are using? Try to download and run the installer standalone (complete) from this link

• CC of Dreamweaver generates one of the 3 error messages when you use find and replace on 8.1 Win 64 bit.

  CC of Dreamweaver generates one of the 3 error messages when you use find and replace is used more than twice in a row. "While executing onLoad in bc_afterSave.htm, the following JavaScript error occurred: at line 188 of file C:\Program Files (x 86) \Adobe|. Adobe DreamweaverCC | Configuration | Shared | ' BC\JS\bc_sites.js': out of memory.

  or

  When executing RunCommand in File_Save.htm, a JavaScript erroroccurred.

  or

  While exciting getDynamicContent inAdressURL.htm, an erroroccirred of Javascript.

  Any thought - I find myself CBWMS of closing and reopening. Will work for the other two find and replace once again before the popup of messaged\s error.

  Cough, cough, cough - 38 500 pages? !  Really?  It's a big site!

  I'm not surprised, that you are short of memory.  Try to limit your F & R records or select files rather than the entire Site.

  Nancy O.

• Can I still use Photoshop on Mac OS 10.10.4 CS5.1? It does not open now that I updated the operating system. Error message: unexpected and unrecoverable error occurred.

  It does not open now that I updated the operating system. Error message: unexpected and unrecoverable error occurred.

  Can someone direct me to a patch file or a plugin that can solve this problem?

  Thank you!!

  Download 5.1 here: test of download Adobe CS5.5: direct links (no Assistant / Manager) | ProDesignTools

  Follow the Instructions of the very Important until you do, or the link does not work.

  If you have registered CS 5.1, you should have your serial number. Otherwise, run the installer and see id he'll do a repair.

• I received an error crash report and submitted for evaluation and to restore the tab. Generally, what causes this?

  The error report crash struck at 07:49, and when I checked my security log I saw that there were two cases of access to internet at 07:49 and an instance of crashreporter.exe internet access at 07:49 sandwiched between the two instances of firefox.exe has firefox.exe. I don't understand why there are these two firefox.exe apps because I had started my Firefox browser at 07:06. Could the accident report was generated by a certain time trying to hijack my browser? I ran two different virus programs and they have negative results and otherwise, everything else seems OK. Any idea would be appreciated. This has never happened before, and I've been on a regular blog, I read a multitude of well known blog.

  For all your discussions that are empty, which means something corrupt them. (This isn't a hacker, firefox.exe will close and open crash reporter, then re - open firefox).

  So, this is your best bet in the future: make sure you are running Firefox 17.0.1, update all software for windows (running Windows update several times), update your graphics, using malwarebytes and then virus scan driver reset Firefox. Refresh Firefox – reset the parameters and modules

• Satellite A210-1 has 0 - I can't use FN and touchpad

  Hi all!

  I have laptop A210-1AO.
  I installed Windows 7 (32) on it!
  Now, I can not use VPA and the touchpad.

  As a first step, I have install VPA(different versions) nothing happens. FN does not work! On the desktop nothing!

  When I try to install the driver for the touchpad y mistak! ("Cannot run DPInst.EXE on your operating system')

  What can I do? THX!

  Hello

  > When I try to install the driver for the touchpad y mistak! ("Cannot run DPInst.EXE on your operating system')

  I searched this DPInst.EXE error and it seems that you are using a 64 bit on 32-bit systems driver.

  First of all, you should check the VAP (value added package) and the utility of Support Flash Cards of other portable devices such as Satellite L500 series for example.
  I installed VAP and utility Support Flash Card that have been put to the most recent series of notebook and FN keys work.

  I also installed driver touchpad of other series like touchpad driver is not specific to a model of laptop.

• Apple TV 4 will not play my movies that I had in itunes. It says unplayable format, but it is the same format that I use always and a lot of movies? What could this be?

  Apple TV 4 will not play my movies that I had in itunes. It says unplayable format, but it is the same format that I use always and a lot of movies? What could this be?

  This new IOS is bug.

  I had the same error message and tried to "create a different version" in Itunes.

  The ITunes says "this video is already formatted correctly."

  I tried to play again on the Apple TV and it worked then after a bit of buffering.

• Design pattern using queues and notifiers and problem with sync

  Hello

  I'm rearchitecturing a 4-channel data acquisition system which includes data acquisition, indexing of data between four channels, signal processing and recording of data.

  All processes are placed in a single loop, and I have subdivided by the following in a producer and consumer two loop (or master with both loops slave), use a queue to manage orders and send the actual data through a notification list. I'm new to this, so I don't know how to go for rearhitecturing but am trying to move several loops. Instead of placing each channel in its own loop, I used only 2 to save duty all architecture. The acquired data are also indexed in the two loops (loop1, loop2):

  Main loop: data acquisition (DAQ Assistant) where Notifier sends data to consumers loops, queue for General commands

  Loop1: bed (table 2D index), addresses and records the data for channels 1 and 2

  Loop2: bed (table 2D index), addresses and records the data for channels 3 and 4

  Question 1: Is it ok to use Notifier and queue in the artchiture (best practices)? I would use two queues, but I find that the program may have a lag (although it lacks all data) and who interrupts the acquisition for the user and I don't want that. I prefer the program to retrieve data in real time and then decided to use the authors of notifications to send data to loops1 & 2. What are the caveats of this? Given that I am gaining at the rate of 1 s/s, maybe it will be enough.

  With respect to the orders queue, this is done and two commands are queued in order to activate loops1 & 2. Using multiple loops slave/consumer, how we manage several channels? the user can choose to acquire all the channels simultaneously or one at a time. I am able to activate the four channels. In this case, because loops can not run in order, how do you ensure that the item is read by the right loop?

  I'm running into a few problems:
  Question 2: synchronizing data - use 'wait on ms' synchronize all loops (main loop and loop1, loop2)
  -data doesn't seem to be very good sync - why is - this? consumer of treatment<>
  -what I'm missing?
  Question 3: processing loss data - because using filers is frozen and using queues is not, I did so that orders of the so-called 'turn on' the two loops is done using a queue. I compared it with the notifiers
  Question 4: Errors - I made loops 1 & 2 output on the notifier error error - they throw an error when the program stops so happy so I was testing for. I read some ni.forums he's talking about is enough, but what are the other types of error monitoring (error reporting)? Thank you very much for reading!

  I programmed so far and it can read all or individual channels but I want check against all cases, that's why I ask these questions to check. I know that architecture may not be the best, so any suggestions would be welcome. I try to get the synchronization of the time and I don't want any data with loss. I guess that the use of queues to send data and commands is ok?

  Thank you in advance for your help!

  
  

• HP15 ab029tx: window update 10 problems should return to 8.1 windows using recovery and come back later

  My computer hp 15ab029tx laptop came pre-installed with win 8.1. I've recently upgraded to win 10. However, after upgrading, I found the following issues. I installed the latest version of the bios and all drivers are up to date on hp site.

  the problems are.

  1. edge flicker browser. Sometimes I use chrome so ok.

  2. autonomy is by 2 hours earlier, that's around 3: 00.

  3. laptop gets very hot. I found coolsense does not. There is no setting of tdp in the power profile. TDP settings was present in windows 8.1.event viewer is full of errors of health active hp, intel dptf, etc.

  error dptf Intel

  Intel (r) platform dynamic and thermal environment: Requested (8.1.10600.150) TYPE: ERROR

  DPTF Build Version: 8.1.10600.150

  DPTF Build Date: June 26, 2015 11:46:12

  Source file:...... \.. \.. \Sources\Policies\PolicyLib\PolicyBase.cpp @ line 693

  Function: PolicyBase::releaseControlofOsc

  Message: Impossible to release the OSC: failure when executing _OSC:

  DPTF Build Version: 8.1.10600.150

  DPTF Build Date: June 26, 2015 11:46:12

  Source file:...... \.. \Sources\Manager\EsifServices.cpp @ line 473

  The enforcement function: EsifServices:rimitiveExecuteSet

  Message: Error returned by the function interface IBSE services call

  Member: NoParticipant

  Domain: NoDomain

  IBSE Primitive: SET_OPERATING_SYSTEM_CAPABILITIES [93]

  Instance of IBSE: 255

  IBSE return code: ESIF_E_UNSUPPORTED_ACTION_TYPE [1202]

  　

  Policy: Policy critical [0]

  Active health HP errors

  COM exception running a command GET Casl EmbeddedController.AuditLog.JSON = return value from the BIOS, which indicates a value of invalid command. : one or more arguments are invalid (Exception from HRESULT: 0 x 80000003)

  4. several fonts of applications is blurred. I use 125% recommended implemented nationally as a 1080 p screen. all drivers intel & nvidia graphics are more recent.

  5. after sleep / standby wireless works irregularly unless I turn it on / off manually & special keys on the keyboard do not work until I restart.

  6. portable seems overall gloomy. (seems to be however performance tests indicate otherwise). Apps to take longer to open.

  So should I go back to earn 8.1 using recovery and wait for more late say 1 year when all bios and driver problems are sorted.

  My main problem is the short battery life and the laptop heats up.

  Concerning

  That's what I'd do - return to Win8.1.

  I have a laptop HP Dv6 Win7 running and the upgrade of Win10 has been a total disaster.  I restored using Win7 HP recovery media.  I'd rather have a BONE more old where everything works, only a new operating system where things do NOT work.

  As to wait a year, the FREE upgrade expires end of August 2016 - so after that, if you still want to upgrade, you will need to purchase a license - and, unlike with previous versions of OS, MS said nothing about the price for upgrade license, or even if such a license will be available then.