Satellite A210-1 has 0 - I can't use FN and touchpad

Similar Questions

• Re: Satellite L300-1 has 3 - How can I use AHCI?

  Hello everyone,

  Recently, I have a laptop Toshiba L300-1 has 3 and I have a problem with the * AHCI in the BIOS when I install or use Win xp (sp2), the laptop cannot start and continue, I think because can not detect the HARD drive in * AHCI mode but doesn't have a problem with * COMPATIBILITY mode.
  Maybe some of you can help me with their knowledge.
  1, which is * AHCI? *
  2nd, which one is the best?
  3rd, how can I solve this problem?

  Thank you very much.

  Hello!

  If you are looking for the AHCI mode, you must reinstall Windows with drivers SATA (Intel Storage Manager). AHCI mode is faster than the compatible mode.

  After the installation of Windows in compatibility mode, you can enable AHCI mode. Therefore, you must reinstall Windows.

  If you want the AHCI mode, look at the Toshiba site for the Intel Storage Manager. This package contains the SATA drivers you need.
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  In addition, this could be useful for you:
  http://195.182.196.33/KB0/TSB8602DB0001R01.htm

  Good bye

• I have windows xp home edition and I had Silverlight to send photos to my hotmail account, something has changed and now I can't use it and I can not download

  I have windows xp home edition and I had Silverlight to send photos to my hotmail account, something has changed and now I can't use it and I can not download

  Hello

  Given that the problem is related to Silverlight, I suggest you post this question in the Microsoft Silverlight forum.

  http://forums.Silverlight.NET/forums/

  listed below or in the Hotmail forum.
  http://windowslivehelp.com/product.aspx?ProductID=1

• Satellite L755-M1CU - I can't use WiFi and Bluetooth

  Hey guys

  I started to level for my windows and I can't use wireless and Bluetooth

  I need drivers for these means of cards

  L755-M1CU

  Saying: "upgrade"... you mean the Windows 10 upgrade?

• Can I use arrowheads and figures to be the custom shape set come with photoshop in graphic design that will be put on Youtube?

  Can I use arrowheads and be in numbers the the custom shape set come with photoshop in graphic design that will be put on Youtube or social networking?

  Hi albert xu,.

  Greetings!

  Yes, you can as this is why photoshop is intended.

  You can use and create designs and post that publicly.

  Concerning

  Jitendra

• Replacing a video card on Satellite A210-1 has 0

  In my computer laptop Satellite A210-1 to 0 it is ATI Mobility Radeon HD 2600 broken video card. Now I can't find another as its old model.

  Including those different similar can (replace) put it inside my laptop?

  We are talking on cell phones and the No.
  It is well known that the replacement of portable equipment or upgrade is very limited so your question is wrong.

  In case this GPU is defective whole mainboard needs to be replaced.

• Satellite A210 - 11 c - what else can log on slot 3 G/HD?

  Hi all

  I have a few questions about my Satellite A210 - 11 c:

  1. What is 3 G/HD slot used for the motherboard except mini PCI-e card of 3 G.
  What else can I connect there?

  2. is it possible to connect the mSATA SSD at this port

  3. What is built into the controller disc HARD SATA 1 or 2?

  4. can I use DDR2 800 Mhz?

  Thank you

  > 1. What is the slot 3 G/HD used for the motherboard except mini PCI-e card of 3G.
  > What else can I connect there?

  You can us only for the 3G module

  > 2. Is it possible to connect the mSATA SSD at this port
  NO.

  > 3. What is built into the controller disc HARD SATA 1 or 2?
  I guess its SATA I (1.5 MB/s)
  My Satellite A210 supports SATA I

  > 4. Can I use DDR2 800 Mhz?
  The speed depends on the speed of the FSB chipset.
  If you supports 800 Mhz FSB (front side bus), the modules would be too much to 800 Mhz.
  Modules if compatible with FSB 667 Mhz, would be the same if 667 Mhz faster shooting speed in charge.
  I guess you have to use the modules of DDR2 PC2-5300 memory

• Satellite A210-183 has error message "FAILED to RENDER GRAPH"

  Hello

  I recently bought a Satellite A210-183 with an AMD processor Turion 64 X 2, 2 GB of memory, ATI X 1200 graphics card 1.3 build in webcam and possibly other features.

  After 1 day use and that I had tried all the features and worked normally, when I tried to open my webcam, I got the message "FAILED to RENDER GRAPH"...

  I restart the laptop and once worked normally and other time showed the same message. I decided to return the labtop back to the store to change because there's a term in this store that modify the machine within 7 days after purchase.

  Certainly, the shop change the labtop with a new one. When I started again some of my programs installed on the labtop such as (msn & yahoo messenger, Nero, office, Sony ericsson Pc Suite and other programs of 1-2 and I had already tried to use the webcam and worked normally) after some restarts, I get the same message when I try to open the webcam... "" FAILED TO CHART RENDERING.

  Everybody knows why I received this message and I can not open the webcam? I get on crazy and I do not think that the problem comes from the labtop. Perhaps something else like a program operating...

  Please someone with something similar helps me.

  Thanks in advance

  It seems that this problem could be linked to the issue of software.
  Try to update the graphics driver and the driver for the webcam.

  Notes; you need to remove the old drivers before you install the new version.

  By the way; If you have problems using the webcam with the MS Messenger then check out this thread:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?MessageID=102403

  Greetings and dude good luck

• Freezes on Satellite A210-10 has

  Hello!

  In recent weeks, I have Toshiba A210-10. But I have a problem that is boring sometimes... but it is not often. The computer freezes for no reason and sometimes it restarts. Vista tells me that it is because of ATI Technologies. I 8.38 pilot, but I'M LOST as I do not have the drivers for the display driver in my computer page > more< and="" i="" see="" 8.371="" on="" the="" other="" a210="" .="" so="" i="" can't="" download="" drivers="" for="" my="" graphic="" card="" any="" more="">

  Please, I'm lost... What can I do? Which driver? What...? :'(

  I have this computer because my other froze too... :'(

  And I'm disappointing the Chicony webcam which is not always in a good mood for MSN...

  Thank you.

  Satellite A210-10 belongs to the PSAEL series.
  As far as I know that this series is supported by some ATi Mobility Radeon X 2400 graphics card.

  Go to the page of European driver of Toshiba and download the compatible ATI graphic driver.
  Right now, I found the version * 8.38* on the page of the Toshiba driver!

  Check it!

• Satellite L300D-10 q recovery DVD Can be used on the replacement hard drive?

  Hello

  I was wondering if the DVD Recovery allows to install Vista on a replacement hard drive? The original hard drive is too small at 160 GB contain all the files that I use the virtual operating system image. The disk hard 500 GB of replacement must be large enough for that.

  The reason why I need to Vista, it's that the 32-bit and 64-bit versions of Ubuntu 8.04.1 and 8.10, cause the fan to run at full speed all the time which is very annoying. So for the moment I can only use Linux in a virtual machine.

  I intend to stay with Toshiba, though, as my two latest portable Toshiba Satellite a PII and a PIII still work today, and both have had Linux on them.

  Now, back to my story, I intend to remove the existing laptop, hard drive use DVD recovery to install to external USB 500 GB disk, replace the existing hard drive in starting up the laptop from the USB and copy my data overall. Before you reformat the old drive as external storage, I will replace in the laptop with 500 GB drive and the test so I can boot from the new drive.

  Key question will be the change of equipment, i.e. the new hard disk of 500 GB prevent Vista to install or activate?

  Thank you very much

  Vista itself can handle huge HARD drive sizes, but the question is: the recovery disc will be happy with 500 GB? The laptop will recognize 500 GB?

  I think it will work very well, because the new laptops are released with 320 HARD drive. 500 GB is not far.

  Its a few trial and error unless anyone here has tested a disc 500 GB HARD themselves.

• Satellite A200-1ZB: what CPU max can I use?

  Hello..

  I have Toshiba Satellite A200-1ZB model with processor Intel Pentium Dual-Core T2370 @ 1.73.
  I was wondering, what processor max speed is supported by this model? Anyone know? (without overheating of course ;)

  Specs. (HWiNFO32)
  Processor: Intel Pentium Dual-Core T2370 @ 1.73, FSB:533 MHz, L2: 1 MB
  CPU platform: Socket P Μpga478 (Micro-FC-PGA) / mBGA479 (Micro-BGA)
  Motherboard Chipset: Intel GM965 (Crestline-GM) + ICH8M
  Support FSB frequency: 800 MHz
  Memory: 2 x 1024 Samsung 667 MHz (PC5300)

  Upgrading CPU is always risky, and in my opinion, no one can tell if the laptop would have functions properly after these updates.
  Another problem may occur.
  First the BIOS of laptop computers could not handle the new processor or there may be a compatibility problem should be know that a CPU creates stronger more heat dissipation that could lead to overheating or unstable work.
  Last but note would less affect these updates and void your warranty!

  But if you want to know what CPU can be used and then check the properties of the chipset on the Intel page and you should find the information on compatible CPU s

  See you soon

• My Macbook has been stolen, can I use my old license on a new Macbook?

  I plan to buy a new Macbook as my old one got stolen. How can I use my old license for Adobe Creative Suite Premium (bought in 2010) on the new Macbook?

  Just install the app/suite and use the serial number, you need to activate it.  Your serial number should be available through your Adobe account online if you have registered the software.

  Download and Installation Help-

  https://helpx.Adobe.com/download-install.html

  Before do you you must contact Adobe Support by CAT and have them reset your activations so that your machine stolen will no longer be able to use the applications and you can have two available that you can use.

  To the link below, click on the still need help? the option in the blue box below and choose the option to chat...

  Serial number and activation support (non - CC) chat
  http://helpx.Adobe.com/x-productkb/global/Service1.html ( http://adobe.ly/1aYjbSC )

• Editing teacher and student, but the trial has expired, I can't use any products?

  I bought the teacher edition and student (plan a year, paid in advance), but after the end of the trial, I can't use products. It requires a serial number, which, to the best of my knowledge, I never received. Is there something I missed?

  Thanks in advance.

  Trimatirate you have a creative cloud subscription?  If the computer is unable to validate your membership, then I recommend you to review the steps listed in Sign in, activation or connection errors. CC, CS6, CS5.5 - http://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html which explains how to solve connection errors preventing authentication.

• Can I use conditional and advanced actions on the same button?

  I'm fairly new to Captivate, but come from a flash background and I do of Captivate to do certain things, that I expected to be straightforward and a normal requirement.

  I want to create a screen with a number of interactive objects, in this case photos, it's the learner clicks on to display a text element.

  By clicking on the following image, the first piece of text is hidden and a second piece shown.

  There are 6 images/buttons which have to work in this way.

  However, I also want to determine if all the buttons have been used, as we force the user to view the entire slide before you continue.

  I can do the hide/show text and buttons, and I wrote a conditional action to check the variables for each button. However I do not know how and when to appeal to this action.

  I was hoping that in my Advanced action for each button, I could add in a call to the conditional action "record"variables", which would be very well fulfil this requirement, however this doesn't seem to be the case."

  I also animation/effects on the timeline before the images are on the meaning of screen I want to go back to the beginning of the timeline to use an event "on enter.

  I am surprised that this isn't something that people most need because while it may be frowned upon outside in the field of e-learning, disabled navigation is frankly not will disappear and working for a large corporation will be a must.

  If anyone can shed some light on this, or perhaps suggest a better approach then I'd appreciate it.

  Thank you.

  Of course, it is possible. This is the approach I explained (for previous versions):

  http://blog.lilybiri.com/template-for-reusing-script

  The models that I offered it, were invited to a lot of times and are used all over the world, which is funny

  I also have templates for CP6 and 7, but has stopped offering everything for free. And 7, you can have all the shares shared in a library that can be used as external library... just a tip: http://blog.lilybiri.com/new-features-in-captivate-7-dot-01

  Agreement on controls on effects for paths, please submit a feature request as many have already done to have the most control over the coordinate without having to change the XML file.

  It would be nice to have timed events. Jim Leichliter has a widget (only for the SWF) which allows some scripted events. The interaction of timer that can do as well, but is not very accurate because after that time there is always a lag of about 2 seconds.

  http://blog.lilybiri.com/events-and-advanced-actions tells us about the available events.

  Sorry for all these links, but advanced actions are my passion, since they appeared with 4. They are limited, all right, but I managed to convince many users to give them a try at different levels. Would love to train more users for this "point-and-click" approach that does not really need programming skills, but only a logical mind.

• Can I use HTML5 and XHTML Transitional on the same Web site?

  HI -.

  I inherited a website here where some pages are valid html5 and some transitional xhtml.  It of OK to leave them like that, or should they all be a doctype.  I use a lot of ugly anomalies on IE9 and I wonder if multiple doctypes are originally the.

  TIA your entry.

  JL

  1. Display through my Virtual Box IE9 I don't get any problems with your videos - everything works fine. If I turn ON compatibility mode, I get an error Flash but the fancybox works as it should. What do you see when you click on one of the video links?
  2. I do not see it and even, I turned on the mode of compatibility etc. Normally, this occurs when a script has not loaded in time. You have a LOT of scripts throughout this site and are placed in page - some top, somehow, a few down. You also have the _js/jquery.js mentioned twice, even though it is in the comments. Try to remove that.
  3. I can't reproduce this issue either, but it uses Flash and scripts are quite heavy. Your nancy.swf is over 300 KB and jquery UI in the 160kb page. Using the HTML5 DOCTYPE, I would advise against using any Flash as the iDevices can not see this.

  As a general rule, pages could do with a lot of storage and compatible css/scripts/DOCTYPES on each page. All CSS should be at the top of the page. All JS usually down but in order - jquery, and jquery ui first and the rest follow. Your direct script actions must always be changed on the page ($(".fancybox").fancybox () etc.), but before the end

  Also, try to delete the comments of your compatibility meta tag: