Error Warning: mysql_pconnect() [function. MySQL-pconnect]: access denied

Similar Questions

• Cannot access Pathname you have the appropriate permissions. Cannot download updates gives error code 643 and error code 5. Always gives access denied.

  Cannot access Pathname you have the appropriate permissions. Cannot download updates gives error code 643 and error code 5. Always gives access denied. You do not have the appropriate permissions. I am the administrator. Change all the complete control. Any other suggestions? Possible virus?

  Hello

  You are unable to download the updates?

  Try the following steps to resolve the problem:

  Method 1: Temporarily disable any security (including firewalls) software and check if the problem persists.

  Check out these links:
  http://Windows.Microsoft.com/en-us/Windows7/turn-Windows-Firewall-on-or-off

  http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software

  If disabling the security software solves the problem, then contact the manufacturer of the specific security software to fix the problem.

  Important: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable
  your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are
  connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.

  Method 2:
  See the article mentioned below and run the Fixit diagnostic tool to fix the error 643.

  You receive error code 80070643 0 x or 0 x 643, code error when you use the Windows Update or Microsoft Update Web sites to install updates:
  http://support.Microsoft.com/kb/958052

  
  Kind regards
  Afzal Taher-Microsoft Support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Pavillion 500-368na: ERROR of UEFI: verification failed (15) access denied

  Since today when I start or restart my PC, I immediately get a blue screen that says:

  Verification failed: (15) access denied

  I press return to enter 'OK' and get another blue screen called "Shim UEFI key management.

  I gives me 3 options: continue start; Register the disk key; Enter the hash of the disc

  If I select Register hash/key I have a long list - I tried selecting some of them, but the key is not found [message: only the encoded DER certificate (*.cer/der/crt) is supported].

  If I select continue starting I boot directly into Windows 8.1 (64-bit) despite my system dual-boot with a Linux distribution (and work with Linux and Windows perfectly until today). Every time I have start or restart, I have to go through this same sequence and can only start Windows.

  Info additional possiblly important:

  (1) I was prompted to upgrade to Windows 10 but have not yet done yet - I "hide" the 8.1-> upgrade option 10.

  (2) yesterday (i.e. just before this problem appeared) the HP Support Assistant "HP PC Hardware Diagnostics UEFI" updated version 5.8.2.0

  At any expert UEFI tips to overcome this problem of access denied or tell me how to register the key that seems to be lost for some reason?

  Thank you very much.

  Hello

  Looks like you have a GRUB that there is little support on this forum to deliver.  You could try the Linux forum.

• New Flash 9 won't install on Mac PPC - 1008:5,-5000 access denied error

  I tried to install the new version of Flash 9 on my Mac Power PC (a G4 running OX 10.4.10). I received the following error messages:
  
  "Error creating file: 1008:5,-5000 access denied error.
  "You don't have enough privileges to access for this installation.
  
  I tried a correction posted on the forum yesterday afternoon and the fix published here last night:
  
  http://KB.Adobe.com/selfservice/viewContent.do?externalId=4aa64290 & sliceId = 1
  
  but these failed. The solution requires multiple users with different permission levels, but my Mac is a system of a user, and I have permission throughout the system.
  
  I think that the problem lies in the installer itself and not the systems on which users install the software.
  
  There are two types of install on a Power PC Mac: I call install Passive and Active.
  
  Passive installation opens a file on the desktop and asks the user to drag the program icon in the Applications folder. Once the copy is complete, the program is installed. No authorization is required - no password must be affixed - because the copy function assumes that the user has permission to make the copy.
  
  Active setup is running an installation program or a script, which place the program and the associated files in the appropriate in the system folders. Active installs ALWAYS require the installer enter the user name and password in order to continue installing - it validates permissions and Setup can continue.
  
  Setup on your new version of Flash 9 is an Active installation program, but he asks NO username and password before you continue with the installation. It's the FIRST time I've ever seen this behavior with a program install Active, and I think that's the problem that people have with the installation.
  
  chmod commands in the Terminal are a 'excessive difficulty', if you will forgive the expression. Simply re - write your Setup program to require username and password as all installers Active, and I believe that the problem will be solved.
  
  Until you do this, my Mac has more Flash of any flavor. is there a previous version that I can download to get this software on my system, until correct you the installer?
  
  Thank you.
  
  
  
  -
  

  I tried for days install the flash player on my mac (which I am the only user) Finally, I went in applications/utilities/disk utility

  I opened the disk utility and chose my main hard drive and the tab first aid, basically, I selected "repair disk permissions". Once the process completed I restarted my computer and when I tried to install the flash player it worked like a charm

  I hope this helps some of you

• Impossible to update of Windows Media Player and Microsoft Security Essentials and the error is "access denied error 80070005."

  Apparently an involuntary change of administrative privileges or permissions (Windows XP Pro, SP3) keeps me updated Media Player version 9 to 11 v. and updated virus Security Essentials definitions.
  For Media Player, wmsetup.log reports access denied error 80070005 and UpdSpAPI.log reports access denied for the HKLM\SOFTWARE\Microsoft\MediaPlayer\Settings\MP3Encoding\LowRate registry key. In regedt32, I'm blocked from display HKLM\...\MediaPlayer\Settings and below, and "are allowed to view the current permission settings, but... can make a change." Except that I can't. I can enter the change but get «...» Access is denied"trying to apply them. So this is the first problem that I need help.
  But of course it's more than a registry key and the subkeys, because MSE too is affected and will download but not install virus definitions. WindowsUpdate.log reports: failed to install with error 80070643.
  My user account (it's the only one!) is part of the Administrators group and all that I tried to verify administrative permissions is positive. This is a new issue. No virus/malware, according to MSE, Lavasoft Ad-Aware, MalWarebytes Anti-Malware.
   
  Original title: cannot update Media Player or Microsoft Security Essentials - access denied Erors

  Hello

  Question: Impossible to update Windows Media Player

  Run the Fixit and see if it helps.

  Difficulty video Windows Media Player and other media or from library (Fixit)

  Problem: cannot install Microsoft Security Essentials

  Perform the steps from the link below and see if it helps.

  I can't install Microsoft Security Essentials

  Hope this information helps.

• Access removable disk error... "Z:\ is not accessible. Access denied»

  1. my (2) flash drives have been available last week

  2. this week, they are inaccessible (on a single computer only)

  On the second computer, I can access the drives normally.

  Clearly, I changed something on the computer problem, but I don't remember what it is.  Probably a registry setting.

  I can't open the drive.  I get the error 'Z:\ is not accessible.  Access denied'

  Although he is running as an administrator ,attempts to format the drive are unsuccessful.  This error is: "You have not sufficient rights to perform this operation"

  Attempts to access the drive through the command line are unsuccessful on the problem computer.

  The drive can be seen in disk management, but may not be formatted or partitioned here (computer problem only)

  On the first computer, everything is normal.  ERGO, the problem is with the second computer.

  Can anyone suggest where I should look in the registry (or elsewhere for that matter).

  Thank you for your help.

  Yaacov

  I don't have an answer after all!

  I just find ControlGuard Endpoint protection had been installed over the weekend.

  Time of work of hacking wee turn it off! :-)

• access denied error ox80070005

  When I try to backup to an external drive WD using windows baackup and restore I ox80070005 'access denied '. No prompt to last Debleema response so I'm changing my original question. NO Security tab of the properties. only general, tools, hardware, sharing, readyboost, customize.  I clicked on a total control to the new owner with the same results. the disc is: st332062 scsi disk device OAS. the driver is:M.S.6.0.600218005.the error States "can't do cliché, access denied" can you walk me through this phone?  Thank you, * address email is removed from the privacy *.

  I have no problem sending files to & the player and I gave him "full" sharing and there much ability. It works very well with its own backup software, but I would use my windows Vista B & R.   The error has changed.  'cliché creation' hang up 10% and I get "BACKUP TIMED OUT"

• access denied internet file DOWNLOAD

  I am running Windows XP - Home Edition and I installed SP3.

  I am trying to download new or updated drivers of PC of the provider (www.Medion.com) site (e.g. the driver display).

  The download sequence proceeds significantly, as described below, but it ends with an "Access denied" dialog box popping up.,.

  Click on "Download" on the page of the site Web of Medion driver.

  "File download" dialog box opens with 'run', 'save', 'Cancel '.

  Select 'run '.

  Download progress dialog box appears. Download seems to complete successfully.

  'IE - security warning' dialog box is displayed stating "Publisher could not be verified" with boxes 'Run' or "do not run" name [in this example] file display.exe TR «»

  Click on "Run" in the box above to run the self-extracting "display.exe.

  Dialog box flashes quickly indicating 'Check Display.exe'

  Indicating the following dialog to the top:

  Squeez Self Extractor - display [1] .exe [excerpt]

  Folder: C:\Medion

  Click on "Extract".

  "Error" dialog box is displayed stating 'Access denied' with the [OK] button

  Any help?  I should have just bought my 10 years a new PC rather than try to resurrect an old man! Arrrggggh!

  Hello

  Make clean boot and check:

  http://support.Microsoft.com/kb/310353

• Why do I get 'access denied relay '.

  When you try to send an e-mail for the first time (new computer with windows 8.1), it gave me this error message: cannot send.
  Relay access denied.

  You have your configuration of SMTP server for the password = none.

  You must go to account settings, scroll to the bottom of the list of accounts until you find the outgoing (SMTP) Server
  Enter and change the settings of the SMTP server to the = Normal password

• Executing an .exe file indicating "Access denied in command prompt" and a pop up with message error "this application can run on your pc.

  Hello team,

  I have a c# console application (EX: Utility.exe) who was once fully functional in windows server 2012 since last year 1. but for a few days while running display of the 'access denied' prompt in the command prompt and a pop up with message

  "This application can run on your pc to find a version for the control of your pc with the software publisher. I am not able to understand why I get this weird error. Other exe files works quite well in the command prompt. below is the screenshot for reference. If everyone is facing the same kind of issues before please answer quickly. are

  Hello

  You may need to ask the question on the TechNet forums:

  https://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?Forum=winserver8gen

  Concerning

• Steam.exe(main_exception):error:Delete of steam.exe failed, Win32 Error5 "access denied."

  I get the error that is displayed in the title line when you try to install the application of steam for the game Left4Dead. Just in case where the window title does not display the full error message:

  Steam.exe(main_exception):error:Delete of steam.exe failed, Win32 Error5 "access denied."

  My system specs are as follows:

  MB: ASUS P6T DELUXE Version2
  CPU: i7 950 QUAD-CORE 3.06GHz
  GC: XFX RADEON HD 4890 1 GB
  RAM: Patriot 12 GB Triple Channel Lat7
  HARD drive: WD VelociRaptor 150 GB 10K rpm
  HARD drive: Samsung Dual RAID Class 1 TB
  HARD drive: dual Seagate Barracuda 500 GB
  PWR: COOLMAX 1200 Watt
  CASE: Aplus Black Aluminum ATX Full Tower
  OS: Vista Ultimate 64-bit

  I checked my system and performed the following tasks to try to resolve the problem:
  My version of Windows is up-to-date. I have no problem hardware or exceptional driver. I tried to temporarily disable my antivirus to complete the installation, this does not solve the problem. I tried to install it as a system administrator. I searched the site of Valve/steam software for a solution, none were found (http://store.steampowered.com/). I searched the database of Microsoft for a solution, none were found. I'm having no problem with other games or applications that were loaded on that computer. The problem is only with the application steam.exe and any game that requires the application of steam to the function.
  I came across the following link which has promised to solve the problem;
  http://www.bing.com/search?mkt=en-us&q=steam%20error%20Win32%20error%205
  https://support.steampowered.com/kb_article.php?ref=5322-QYZB-5344  
  I followed the instructions at three times, all with the same error message.
  The default program is responsible for the following: C:\Program Files (x 86) \Steam.
  I tried to load the program on different hard disks and got the same error code.
  I have triple checked all user profiles to make sure that the appropriate privileges have been set (Admin). I checked all the steam program elements to ensure that they have been set to run as a program director executed. I double checked that proper TCP/UDP ports are open for the application of the steam function. http://www.resoo.org/docs/Counterstrike/steam_ports.html
  Any help to fix this would be greatly appreciated.

  Hello Platinum,
   
  Thank you for writing to Microsoft Vista Community Forums.
   
  This error is primarily caused by a lack of permissions for the user, having the Steam.exe file attributes set to 'Read only', or by another program interferes with the installation of Steam process (if the steam client application has been updated to a version that was not included in your package of Steam, Steam will download a new copy of itself and then delete the old file Steam.exe except when another program interferes).
   
  1. check your Windows user permissions.
  Please ensure that you are logged on as administrator on the computer that you use to install Steam.
  2. check the file attributes
  3. right click on the file Steam.exe, which was created after running the Steam Installer, and then select Properties
  4 uncheck the read-only box if it is checked and hit apply before closing the window
  5. try running the Steam.exe file once more
  6. check the settings of your security software
   
  If you are running an antivirus, firewall or any product safety program that may interfere with the removal and replacement of the file Steam.exe (some security software will check information of a file whenever it is changed and block the automatic replacement of files) Please check your settings for the program and ensure that you are prompted to authorize activities that may trigger the security software.
   
  Remove spyware, Adware and virus software and try to run the installation again.
   
  In addition to the steps above, follow these steps:
  1. go in C:/Program Files/Steam /.
  2. right click on Steam.exe and go to properties.
  3. click on the Compatibility tab.
  4. check run as administrator and click OK.
  5. then I deleted StemeTemp (or something like that. the steam icon).
  6. then run Steme.exe again.

  It will be useful.
   
  Thank you and best regards,

  Srinivas
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• "Access denied" error when trying to install KB2482017 - update for Internet Explorer

  Original title: KB2482017 - update of IE

  I tried to install this update, but I get "access denied". I also tried to install the KB using the file without failure, but the same error.

  Any ideas on what I might try next?

  Help us help you: start by reading this post 'sticky '...

  What information to post in the Windows Update forum
  http://social.answers.Microsoft.com/forums/en-us/vistawu/thread/1467f44b-ee27-4F7D-98d7-f1c4b35b3395

  ==============================================

  Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy. If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• When trying to install XP sp3 receive error message "access denied."

  @meisj0n: to avoid confusion, please start a new thread about your specific problem and your computer.  Indicate your IE version and the full version of Windows (for example, WinXP SP1;) Windows XP 64 - bit SP2) in your first post.  Thank you. ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

  Sorry about that: P I see that you are in a large number of forums. has been through a lot of things yesterday. nothing has really worked. Yes, info on the comp IE 8.0.6001.18702, since a recent updated Version. Works fine now after using default automatic updated the first couple times. CPU: Intel (r) Pentium (r) 4 CPU 2 .80GHz motherboard: Dell (0F5949) RAM: 510 mb Hard Drive: 74 GB (ST380011A) graphics card: NVIDIA GeForce FX 5200 XP: Microsoft Windows XP (2600) Service Pack 2 32-bit

  Hi Robear,

  I'm having a problem with the installation of SP3 for XP Edition family. I have no updated two years ago because all updates have been making my computer lag (and I have them turned off).

  Now, I tried to be diligent and save my computer died. Latest things I've done included installation COMODO System Cleaner and the task of the clean computer. In regards to SP3, I get an error saying: access denied. I tried following this thread: http://support.microsoft.com/kb/949377/. Did not work. I hope that http://support.microsoft.com/kb/950718/en-us will work:

  In addition to this problem with SP3, update in C:\Windows\SoftwareDistribution log shows that I was not able to install Microsoft .NET Framework 3.5 Service Pack 1. I read everywhere, but still don't really know if I should update the .NET framework. currently have versions 1.0.3705, 1.1.4322 and 2.0.50727. Thank you very much

  (And Norton) McAfee applications are known to not uninstall (or upgraded) themselves.

  1. download the McAfee Consumer Product Removal, save it to your desktop tool:http://download.mcafee.com/products/licensed/cust_support_patches/MCPR.exe

  2. close all open applications (that is, anything with an icon on the taskbar).

  3. double-click on the file that you saved in #1 above to run the utility. DO TAP not your keyboard until the race ends, then restart.

  4. If IE7 or IE8 installed, reset IE by http://support.microsoft.com/kb/923737.

  6 reset Windows Update by...

  How to reset the Windows Update components?
  [Access KB971058 via Internet Explorer (32-bit) only; Run the difficulty in DEFAULT and AGGRESSIVE mode]
  http://support.Microsoft.com/kb/971058

  7. restart & test.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  If still no joy, there is a good chance that you see the effects of a hijackware infection!

  NB: If you had no installed anti-virus application or subscription has expired * when the machine was first infected * and/or your subscription has expired since and/or the machine is not kept fully corrected in Windows Update, don't waste your time with any of the following: Format & reinstall Windows.  A repair install won't help!

  Microsoft PCSafety provides users at home (only) with free assistance in dealing with infections by malicious software such as viruses, adware and spyware (including unwanted software).
  https://support.Microsoft.com/OAS/default.aspx?&PRID=7552&St=1

  Also available via the homepage of Support of consumer safety: https://consumersecuritysupport.microsoft.com/

  Otherwise...

  1. see if you can download/run the MSRT tool manually: http://www.microsoft.com/security/malwareremove/default.mspx

  NB: Run the FULL scan, not analysis FAST!  You may need to download the MSRT on an uninfected machine and then transfer the MRT. EXE to the infected machine and rename it to SCAN. EXE before running it.

  2A. WinXP-online Windows Live Safety Center scanner 'Protection' (only!) in Mode safe mode with networking, if necessary:http://onecare.live.com/site/en-us/center/howsafe.htm

  2B. Vista or Win7-online this scanner instead: http://onecare.live.com/site/en-us/center/whatsnew.htm

  3. now post the logs required in a forum appropriate for support by an expert in the field. DON'T SKIP THIS STEP!

  I can recommend the assistance of experts available in these forums: http://spywarehammer.com/simplemachinesforum/index.php?board=10.0, http://www.spywarewarrior.com/viewforum.php?f=5, http://www.dslreports.com/forum/cleanup, http://www.bluetack.co.uk/forums/index.phpand http://aumha.net/viewforum.php?f=30

  If these procedures look too complex - and there is no shame in admitting this isn't your cup of tea - take the machine to a local, good reputation and stand-alone computer (that is, not BigBoxStoreUSA or Geek Squad) repair facility.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Error: 0 x 80070005 access denied: the requested action requires elevated privileges.

  I downloaded and install a copy of assessment of RC of windows 7 build 7100 and use the key to legitimate windows 7 RC to activate and he succeeded.

  After a few days, my pc hangs and after reset, he began asking to activate windows now. Although pressing ok product error '0x80070005' (I am using the administrator account). Even using the command "slmgr.vbs" does not display ' error: 0 x 80070005 access denied: the requested action requires elevated privileges. "

  Please help and thank you.

  Your question has nothing to do with Windows Update (compared to the upgrade of Windows). Please repost your question here rather: http://social.answers.microsoft.com/Forums/en-US/w7install/threads ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• I receive error Code: 0 x 80070005 (access denied) for the KB2698365 & KB2719985 updates

  The environment is Windows XP SP3

  -Windows Update fails for these 2 updates

  -Fixit research and 'fixed' a problem to update storage location.

  -Windows Update still does not work

  -Download the update on Microsoft.com

  -Manual installation fails with 'Access denied' during installation.

  Runnng Bit Defender but it too fails when you try to automatically install these 2 updates.

  Yes, I am the administrator and the only user on the machine.

  Thoughts?  Help?

  THX!

  Hello

  1. what ran fixit?

  2. what version of Windows XP are you using (whether x32bit or x64bit)?

  3. you have made no changes to the computer before the broadcast took place?

  Follow the steps:

  Method 1:

   

  Follow the article:

  http://support.Microsoft.com/kb/968003

  Method 2: To run only the fixit for Windows update reset component

  http://support.Microsoft.com/kb/KB971058

  Restart the computer and the monitor upgrade of windows, if you get the same error then perform method 3.

  Method 3:  Run the Windows update agent and check.

  http://support.Microsoft.com/kb/943144

  a. click on the link above and download the appropriate version of Windows Agent and run it.

  b. restart the computer and control it upgrade of Windows.

  c. If the problem remains same run the run the Register the Wups2.dll file attach it in the above link and check for the issue.

  Registry warning:

  This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the link below to follow the steps to back up registry:

  http://support.Microsoft.com/kb/322756

  Hope the above information is helpful.