Access removable disk error... "Z:\ is not accessible. Access denied»

Similar Questions

• We get an error "D: / is not accessible." a device i/o error"when trying to access hard drive

  * Original title: e/s problem

  I am not able to access my hard disk.windows that says: -.

  "D: / is not accessible." an i/o device error. "

  I also tried chkdsk but it says that it is not directly operatable.

  Hi Rishanpc,

  Thanks for the post. I am sorry to hear that you found a mistake "D: / is not accessible." a device i/o error"when trying to access hard drive.

  I imagine the inconvenience that you are experiencing. I will definitely help you with this.

   

   

  To help you suggest several steps to solve the problem, I would appreciate it if you could answer the following questions:

  1. have you checked if the cables are connected properly?

  2 what is an internal hard drive or external?

  3 have there been recent changes made on the computer before the show?

   

  The most common cause of a non-accessible i/o error is a disconnected cable. When the computer tries to access a device, and it's no response after several tests, it will generate this error. Another common cause is when a program tries to access a file that has been removed or eliminated.

   

  Disconnected Hard Drive/cable misconfiguration

   

  Internal hard drives require a specific set up. IDE hard disks can have only one master. If another hard drive has its defining together correctly pin code, a user is perhaps not able to access the data, and he will receive a message that the drive are not available. Cables come off inside the case of the computer also cause a not accessible i/o error. The user can correct this problem by opening the case and attach the data cables for each drive safely at the back of each drive and the motherboard.

   

  You can follow the steps below and check if it helps.

   

   

   

  a. go to "Control Panel" in the start menu and choose 'performance and Maintenance '.

  b. click on 'System' then go to the Hardware tab and click on "Device Manager."

  c. find the device that records an error by developing the appropriate category nodes. If the device has a red "X" on the icon beside its description, the hardware is disabled; Go to step d to activate it. Otherwise, go to step e.

  d. go to the general tab and click on "Activate the device" found in the device status section. then press 'OK '. (Note: you may need to follow the guests, as indicated via an assistant of favorable device.) If you do, continue to click "Next" and follow the instructions until the process is complete.) Test the equipment. If an error is displayed, go to step e.

  e. click the general tab and click "Troubleshooting" found in the device status section and then press 'OK '. Follow the prompts to fix the problem. If an error is still displayed, go to step f.

  f. click the driver tab and click on 'Update driver'. Follow the instructions until the process is complete and then to test the equipment.

   

   

   

  Your response is very important for us to ensure a proper resolution. Please get back to us with the information above to help you accordingly.

• Error F:\ is not accessible, the setting is incorrect. "after you connect a hard disk.

  Hello

  The old laptop "died"... is no longer start Windows XP.  I was not looking for repair/format the internal hard drive; I just removed

  the laptop and ordered a USB-to-IDE/SATA adapter.  I have a new laptop running Windows 7.  When I connect the former intern

  hard drive for the new laptop (via USB) device appears as 'Local disk (f)', and the hard drive physically starts to operate.

  Unfortunately, when I select ' disk (f) Local ' to access the files the computer works for several minutes and eventually, a mini-window

  appears stating "F:\ is not accessible.   The parameter is incorrect. "I've seen a number of concepts on the internet in administrative matters

  controls, testdisk, chkdsk, but I have not taken action yet because I'm not sure what to try first.  Thanks in advance for your help.

  Kind regards

  Edwin

  Original title: new laptop can't access the files from the hard drive of the laptop old (the parameter is incorrect)

  Hi all

  To resolve this problem, I ended up going to the start window.

  1. type cmd in the box start search

  2 right click on cmd.exe window and choose Run as administrator

  3 type chkdsk /F /R /X E:

  (Note: the drive is identified as E :))

  After several hours later, everything was fine and accessible.

• Equium A100: CD/DVD drive wont read - D:\ error message is not accessible

  Hello.

  My cd/dvd rw drive will not read certain DVD/CD-ROM. I bought my equium (A100 I think) laptop, nine less than a year ago and have had this problem since I got it. The disk which do not work on the laptop work fine on another pc / dvd players, if the disc is not defective. At first I thought that it would be a driver issue because some of the disc worked fine, so I never got the laptop back to the store I bought.

  A message appears "D:\ is not accessible. The request could not be performed because of an i/o device error".

  I recently just got internet installed in my house and I went to the toshiba site to see if there are newer drivers that would solve this problem. I downloaded a bios update and an update of dvd ram and installed, but am still having the same problem.

  Can someone help me cause am totally stuck on what to do now.
  Thank you.

  Hello

  As you have probably not known the CD/DVD drive support not all backgrounds.
  In the user manual, you will find a list of supported CD and DVD

  But I assume that you are the reader cannot read certain media because of the impure registry as this other thread mentioned:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=24203&MessageID=88868

  Please check that the user holmdps has solved this same problem.

• WNDR3700v2 with Runninng Win10 ReadyShare now get the error "\\Readshare is not accessible.

  I have the NETGEAR WNDR3700v2 with ReadyShare router. Was working fine yesterday. Runninng Win10. Today, after some update and restarting my laptop, from one day to the next, get error message: "\\Readshare is not accessible. You might not have permission to use this resource... "I can access this USB HD on another laptop with Win 10. What should I do to get it back working properly again? Thank you.

  Darryl

  There was at least on Win 10 update overnightt, because my laptop has rebooted. But a few days ago the Readyshare started working. Funny, that was my 2nd laptop Win10 could still access ReadyShare. Mayby another update on my first laptop caused the problem. Today he's back to working perfectly again. Thank you.

  Darryl

• Attempt to start in the recovery environment gives 0xc000000e error - "device is not accessible.

  HP Pavilion g4-1117dx laptop computer 4 GB, Win 7 Home Premium SP1 64-bit running

  Tried to boot into the recovery environment through the HP Recovery Manager (v 2.0.9.0 Rebecca.exe 3/25/12)

  However, I get to the Windows Boot Manager screen that says error 0xc000000e - device is not accessible

  I scanned the partition HP_TOOLS for errors, including an analysis of the sector, but it does detect any errors.

  FYI - I have repair disks that I created.  Is it possible to repair or recover only the partition HP_TOOLS?

  Just to be clear, the problem is with my Recovery partion only.  Win 7 in main boot works fine.

  Suggestions to fix or repair, please?

  Don't know what else to suggest other than using recovery discs to reinstall. If you have recovery disks, the recovery partition is not really necessary, more a convenience than using disks, that's all.

• Canvio Basics 500 GB - F:\ error message is not accessible

  I just bought this drive ext and were happily transferring photos, suddenly this message appears:
  "F:\ is not accessible. The file or directory is corrupted and unreadable"

  What does that mean? Is he dead yet?

  I guess as the F: / / means the connected external HDD.

  You are able to access all data stored on the HARD drive?
  You are able to create a folder on the HARD drive?

  Please check this!

  Please also start the console command (CMD) line and type this:
  f:
  Press enter
  dir
  Press enter

  Now you should get a list of the data stored on the HARD drive.
  It work?

• "Popup error ' A:\ is not Accessible, incorrect function" when you try to read the "A" drive in Explorer.

  When you try to read a disk in the 'A' drive from Windows Explorer, I get a Popup with a white 'X' in a red circle and a message that "A:\ is not Accessible" "Incorrect function" and an OK button at the bottom.  It happens to any disk, formatted or not, with the files or empty.  I replaced the disk drive - no help.

  I don't know if it's a windows setting went crazy or a motherboard problem.  My BIOS seems correct.  If I do a 'fill' of window hardware in administrative tools he tells me that I have data on the disk.

  I have XP - SP3.

  Any ideas-

  go to a command prompt and type "sfc/scannow" (without the quotes) and let it run... see if this is helpful at all.

  Hope do you feel better soon.

• Receive the error "E: is not accessible. The file or directory is corrupted or unreadable.

  Original title: USBnot work

  Today, I inserted a USB key works perfectly in my laptop computer and got this message:

  "E: is not accessible. () The file or directory is corrupted or unreadable.

  Ideas of how this could be everything and no matter what suggestions how to fix it?

  I use an Acer laptop E1-522 (a new one that just came back from the manufacturer after warranty repairs and also had a technician called and insert a new hard drive because of problems with product key).

  I use Windows 8.1 and have used Internet explore and currently using Firefox as my browser (same questions with both browsers).

  Thanks in advance.

  Sorry, I don't remember the sequence that I used, but messages asked me to change the drive letter of the drive that I was using, so I changed it from E to F. He has not made a difference, because I always get a message "the disk is damaged or unreadable. Finally, I formatted, so I guess it should be the end of the story. I got lucky that didn't not lose all the useful data.

  Thanks for your help. I very much appreciate the way in which people help "technologically challenged" people like me.

• Why can't I remove the error HTTP 404 not found on my screen

  I got orange web page then that opened not more so I have been using google and kept getting HTTP 404 not found appear on the screen and blocks access to other sites.   I have now installed firefox. don't know what to do at all.  my computer keeps going really slow too.  It of an old version of advent and has windows vista.

  Hi krissy555,
  This error looks like your garden variety networking problem.
  A few quick questions...
  1. When did you start this error appear?
  2 can you access any web site or what's with a couple?
  3. is there anything to be added or deleted before this started?
  4. make the same mistake with different browsers?
  Here is a link to troubleshooting for general problems. Let us know what happens.
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-connection-problems
  B Eddie

• Cannot access other homegroup files, error "you might not have permission to use this network resource".

  Help

  I have two laptops 7 Home premium to windows. I created a home group. A computer can see and access each other, the other cannot see, but cannot access the other. When I click the icon from the other laptop, I get the error \\pc is not accessible. You might not have permission to use this network resource...

  I checked the password, name of House Group, sharing and discovery of parameters already and everything seems to work. The only antivirus on both computers is microsoft security essentials.

  What should I do?

  Hello

  Please contact Microsoft Community. I understand that you have a problem with access to shared files from other computers on homegroup. I appreciate your efforts to solve this problem, I'll probably help you solve this problem.

  This problem might have occurred because of these reasons:

  1. Permission problem.
  2. Incorrect settings.

  Try the steps listed here and see if it helps:

  Method 1:
  I suggest you to run the troubleshooters of shared folders to automatically find and fix some common problems.

  a. open the shared folders convenience store by clicking on the picture of the Start button Start button and then click on Panel.

  (b) in the search box, type Troubleshootingand then click Troubleshooting.

  c. under network and Internet, click on access shared files and folders on other computers.

  Method 2:
  If the problem persists, I suggest that return you the item and make sure file sharing permissions are set correctly.

  File sharing essentials
  http://Windows.Microsoft.com/en-us/Windows/file-sharing-essentials#1TC=Windows-7

  Note: try the steps that you have not tried before.

  See the article for more information.

  Why can't I access my homegroup?
  http://Windows.Microsoft.com/en-us/Windows7/why-cant-I-access-my-HomeGroup

  Hope this information helps. Reply to the post with an up-to-date report of the issue so that we can help you further.

• Error: "\\(PC Name) is not accessible." You might not have permission to use this network resource... The specified network provider is not valid.

  Hi, this is a follow-up to the issue and my second attempt to find the solution. In addition, it is still connected to my first and second positions.

  My laptop that works with Windows 7 32-bit has 2 two natural questions:

  1. I can't access PC's on the network on the laptop itself and thus get an error:
  "\\(PC Name) is not accessible." You might not have permission to use this network resource. Contact the administrator of this server know if you have access permission. The specified network provider is not valid.

  2. When you make the file sharing Wizard, I get an error "your folder cannot be shared" and the only option is to click on 'Done '.

  I'm trying to share folders to another laptop that works with 64-bit Windows 8 but I think there must be a problem with the Windows 7 laptop. I can share and access all the folders of any laptop before.

  Thank you! Any useful response will be greatly appreciated.

  Hello Sevi,

  Thanks for posting your query in Microsoft Community.

  I understand that you have problems to access the specified network.

  But, I would like to know some information related to this topic to help you better.

  (1) is connected to a domain of the computer network?

  (2) is your computer connected to the homegroup?

  (3) have you been able to access the specified network previously.

  In the meantime, please follow the suggestions mentioned by Fazil M on May 15, 2012 and check if this is useful.

  Error "\\computername\f is not accessible.  You might not have permission to use this network resource"when accessing to Windows XP computer via a working group

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-networking/error-computernamef-is-not-accessible-you-might/a8db7f8c-6a7b-462D-B7F5-48707ae6b1f8

  I hope this helps. Otherwise, feel free to write us again and we will be happy to help you.

  Thank you

• D:\ is not accessible incorrect function

  If the disk is empty is NOT accessible IF given it's accessavle.

  This with MS Internet Explorer

  Right-click on the Start button and select Explorer.  And use Windows explore not Internet Explorer to access your local hard disks.
   
  Steve
   
  wrote in message News: * e-mail address is removed from the privacy *...

  If the disk is empty is NOT accessible IF given it's accessavle.

  This with MS Internet Explorer

• Satellite - D drive is not accessible

  Hi, I am trying to copy files to a disk for backup purposes, but I get a message error "D:\ is not accessible. incorrect function. Enyone help? Surely, it must be possible to copy files on a disk.

  What satellite notebook you have exactly and what drive are you trying to copy?
  It's a Toshiba recovery CD?

• Lenovo USB 500 GB hard drive not Accessible?

  I recently bought a Lenovo 500 GB USB external hard drive. I kept all my back ups and video files it contains. One day I plugged the external hard drive to my laptop and do a backup of file inside and forgetfully system restore left the hard drive and my computer laptop battery for watch a movie outdoors. The evening when I went back and checked, I found my system shut down due to the discharge of the battery and when active windows had incomplete restoration and new restoration of the drive HARD has been giving a cyclic redundancy check error message. I installed a new windows 7 and I checked my Lenovo 500 GB external HARD drive, it was not accessible more and following problems were encountered

  1 system takes too long to appear Local of Lenovo 500 GB of hard disk drive icon.
  2 local Lenovo 500 GB disk icon HDD is not accessible or cannot be formatted.
  3. when any pen drive or usb plug is made, it is never detected or answered by system until the external HARD disk USB is disconnected from the computer.
  4. start of the splash screen stops when USB external hard drive is connected during boot and startup continues as soon as it is unplugged.
  5 file system went from NTFS to HTFS.
    
  What exactly is the problem? Is there anyway to recover my files from the external hard drive. I tried to share this drive and allowing the permissions, but everything is messaged inaccessible place.

  It seems that the hard drive has failed. Contact the manufacturer support for assistance. The drive can be replaced.