Error when calling Fusion R9 on Service SOAP premise of JDeveloper 11.1.1.7

Similar Questions

• error when calling NtSetTimerResolution in NTDLL 1097. DLL

  I get 1097 error when calling NtSetTimerResolution in NTDLL. DLL. why?   I scoured most of the posts on this forum describing the 1097 error and tried the solutions without success.

  This is a link to the function prototype (copied below) that I adapted in the node call the attached vi library (you will be asked to locate NTDLL. DLL on your system when opening it)

  NtSetTimerResolution and NtQueryTimerResolution are defined as follows. All hours are stated in hundreds of nanoseconds.

  NTSTATUS NtSetTimerResolution (
  IN ULONG RequestedResolution,
  IN BOOLEAN defined.
  ON PULONG ActualResolution
  );

  Parameters

  RequestedResolution

  The desired timer resolution. Must be the legal scope of the system timer values supported by NT. The standard x 86 systems it's 1 to 10 milliseconds. The values that are within the acceptable limits are rounded to the next higher standard x 86 HAL millisecond limit. This parameter is ignored if the Set parameter is set to FALSE.

  Set

  This is TRUE if we ask a new resolution of the clock, and FALSE if the application is indicating that he hasn't needed a resolution already implemented.

  ActualResolution

  The resolution of timer in effect once the call is returned in this parameter.

  Woohoo! I solved the problem.

  I was using a copy of NTDLL. DLL C:\Drivers\I386\SYSTEM32\NTDLL here. DLL (version 5.1.2600.1106)

  instead of C:\WINDOWS\system32\ntdll.dll here (version 5.1.2600.5755).

  An observation aside Interestingly enough, I did, when I tried to put the old version in C:\WINDOWS\system32 to see if it was just a problem of dependence, rather than a version number, I couldn't do it!  I tried renaming C:\WINDOWS\system32\ntdll.dll C:\WINDOWS\system32\ntdll.dll.old and immediately a replacement c:\windows\system32\ntdll.dll pop up would be in his place! I even tried to drag / drop of C:\Drivers\I386\SYSTEM32\NTDLL. DLL C:\WINDOWS\system32\ntdll.dll, it seemed to replace, but a system of security immediately replaced it with the latest version.   WinXP is smarter than I thought, or maybe something like Microsoft Windows Defender Antispyware installed by our company does this.

  In any case, I've confirmed lateer version is necessary because when I copied C:\WINDOWS\system32\ntdll.dll to C:\Drivers\I386\SYSTEM32\NTDLL. DLL, it also solves the problem.

  You might well ask why I did not use the correct version in the first place - well not knowing where he was, I only noticed the old version when I searched for it with my Google Desktop.

  Rgds

• "Security error" when setting 'Microsoft Exchange Hosted Services' Exchange account (user in company)

  I am a user in a company with a very large company that actually uses Microsoft Hosted Exchange services hosted by Microsoft employees in their facilities.  I called Palm support and they were clueless and zero help.  The lady pointed me to some Palm article I had already read and only remotely had nothing to do with my problem.  I don't see anything about this error message in the forums and google searches. Sprint has even replaced my other reasons palm pre, and the same error occurs once I configured the exchange account. I also see the error when I set up my account on my pixi nine wives. Our pre and pixi have already exchange accounts set up with success on our phones that are hosted by sherweb. Sherweb's exchange accounts work fine. I tried to set up this account of microsoft hosted exchange 5 - 6 times with the same result. He accepts my configuration information and adds to the list of email accounts available in the meadow. However, it keeps popping up the message stating "error of security policy:"Exchange..." Tap for details"(with a yellow exclamation point). Then he said "Security policy error" the Exchange (first part of my email address) account is disabled because it is impossible to define security policies. "'Leave this option disabled' or 'delete account '. I know that something does not work because it applied a policy of password or PIN on my phone which is not necessary, unless the account has been added. I can also see it in the "Mobile devices" section of outlook web when I login. This is the place in web outlook where you can see the last time the device synchronized, if remote, you can wipe the phone etc. If anyone has an idea how to solve my problem please post. Any ideas? I'm fresh out of ideas on this issue and very frustrated by the Palm developers. Just another example of evil-development and practical tests by Palm. I hope they correct this problem on later versions, but I'm only slightly optimistic that they will never get this medium of exchange e-mail at the level necessary for the support of large corporations. What I know is that my Microsoft Hosted Exchange account works fine on a Windows Mobile phone and an iPhone 3GS (confirmed by the other coworks who have set up their phones using our Exchange services). Accordingly, I have no choice but Palm to blame for this problem instead of Microsoft. Please, Palm fully support microsoft exchange e-mail users!

  After a lot of research on the subject, here is my point of view on the State of support for MS Exchange @ Palm and other companies.

  Unfortunately, Palm Pre and Pixi, WebOS is not fully supported Microsoft Exchange.  This has led to numerous reports of frustrated customers and countless hours of time wasted by consumers and technical support trying to figure out how to connect these Palm devices to the MS Exchange e-mail servers.  Way to go Palm!  Provide support for all the free email accounts worldwide and decide not to develop a product that is able to support your most rich and more influential-based email clients.  These are the people who are most likely able to spend more money on your mobile products or make decisions for companies that are able to buy huge amounts of smart phones.  Way to go guys!  Penny wise and dollar foolish if you ask me!  Palm supports only partially a handful of MS Exchange security policies.  They document what they take in charge, but they do a very poor job of documenting or even explain the limitations of the software.  Their States of documentation that the security policies that are not supported will not be applied and that users will still be able to connect to the exchange server.  This is certainly not true based on the reported error and other similar user reports.  Here is how iPhone and Palm compare in regards to the support of MS exchange security policy.  Notice in the quotes below the iPhone supports the policy of 'require the encryption of devices' which is very probably used by your greater and more security conscious companies or Government institutions.  I'm sure that Palm's inability to support "device encryption" is why I get this error, even if I have really no way to prove it at the present time.  Come on Palm, if you go to support full POP3 and IMAP, you must provide the full support of the binding protocol and political security by Microsoft Exchange product.  Here is the comparison between iPhone and Palm WebOS:

  ' Said the site of Apple, the iPhone supports the camera allow, password enabled, allow a Simple password, alphanumeric password, Password Expiration, history of password, Maximum password attempts failed, minimum password length, maximum idle lock, policy, Minimum refresh interval complex character devices. ", require manual synchronization while roaming and - in iPhone OS 3.1 only - require Device Encryption". (13 security policies)

  "Palm Web site says its WebOS 1.1 and later support active password, alphanumeric password, password history, Maximum password attempts failed, maximum length password, lock of inactivity maximum, Minimum peripheral characters complex and Password Recovery." (8 security policies)

   

  Windows Mobile 6.1 supports all THE policies.

  BlackBerry does not support the EAS (MS Exchange)

  Google's Android is not compatible EAS (they may have recently released some support but not full)

  Conclusion: If you want a mobile device that fully supports MS Exchange, buy something that is running Windows Mobile 6.1 (or higher) or even an iPhone 3 g (or more).  At least, until Palm decides they want to throw a development more $$ to support Microsoft Exchange E-mail to enhance their level of support.

  Reference: "how to avoid the lie of the foreign exchange policy by smartphone' http://www.infoworld.com/d/mobilize/how-avoid-smartphone-exchange-policy-lie-004?page=0, 1

  Message edited by morgan1112 on 12/01/2010 15:00

• Loading of a DLL on RT: Missing Export "DecodePointer" "Kernel32.dll" and 7 error when calling the DLL

  Hi, I recently changed to Visual Studio 2010 and Windows 7 64-bit.

  I have an existing Office RT system running RT 2009.  This system calls a DLL that I already built using Visual Studio .net 2003 and Windows XP.

  Since I've recompiled the DLL I get an error 7 file not found error when I call the RT DLL, even if I simply replaced the old DLL with a new one in the file system so the path has not changed.

  I also noticed that the message on the screen connected to the RT system during startup:

  "achieveworldpeace.dll" load error: lack of export 'DecodePointer' of ' Kernel32.dll'.

  Any ideas on this problem?  It is perhaps as simple as a switch in the compiler?

  Thank you.

  I'm not sure it's a simple switch in the project settings in Visual C. The problem is clearly in the standard C runtime library that gets linked to your DLL and refers to exports of Windows which are not available on the RT system. Don't forget that the RT system is a limited Win32 API emulation.

  I usually avoid these problems using Visual C 6 to create DLLs for LabVIEW projects. The standard library of the C runtimes will not know what Windows API reference more recent exports because they have supported even under Win95. So unless your explicitedly reference code not supported RT APIs you wouldn't have problems. If you do not use the standard C file i/o functions and management of memory in your DLL functions, you can also try to link statically C runtime libraries in your DLL, or vice versa depending on what you have now. It may or may not work. Otherwise there is not much else but by using an earlier version of Visual Studio.

• error when calling a function package

  any idea why my object is slip out during a function call. the error is
  oracle.apps.fnd.framework.OAException: java.sql.SQLException: ORA-06502: PL/SQL: digital or value error: character of number conversion error
  ORA-06512: at line 1
  
  It errors when cs.execute () is. What is the investment? Thanks for the help...
  
  
  then the pkg func is xxx.get_log
  Get_Log (rmode in NUMBER, doc_type IN VARCHAR2 DEFAULT 'SUCH', IN VARCHAR2 DEFAULT NULL, annual
  doc_num IN VARCHAR2 DEFAULT NULL-, p_out out varchar2.
  )
  RETURN varchar2 IS...
  
  the co
  _______________
  ParamDocLocatorParamList serializable [] = {paramRMODE, paramDOC_TYPE, paramDOC_ID, paramDOC_NUM, p_out};
  
  Am = (OAApplicationModule) pageContext.getApplicationModule (webBean) OAApplicationModule;
  OADBTransaction dbtrans;
  OAViewObject docLocator = (OAViewObject) am.findViewObject ("DocLocatorVO1");
  
  rtxt0. SetValue (pageContext, "here it is" + am.invokeMethod ("getHTMLString", paramDocLocatorParamList));
  docLocator.executeQuery ();
  
  
  am.invokeMethod ("getHTMLString", paramDocLocatorParamList);
  
  
  _____________________
  
  the impl
  
  public String getHTMLString (String paramRMODE, String paramDOC_TYPE, String paramDOC_ID, String paramDOC_NUM, String p_out)
  {
  System.out.println ("enter the Impl AM");
  
  
  CallableStatement st = null;
  // {
  TXN OADBTransaction = (OADBTransaction) getDBTransaction ();
  Connection Conn = txn.getJdbcConnection ();
  
  String sql = "START: 5: = test_proc.get_log (: 1,: 2: 3: 4);" END; ";
  
  CallableStatement cs = txn.createCallableStatement(sql,1);
  String ErrorExist = "";
  String getHTML = "";
  
  Try
  {
  cs.setString (1, paramRMODE);
  cs.setString (2, paramDOC_TYPE);
  cs.setString (3, paramDOC_ID);
  cs.setString (4, paramDOC_NUM);
  cs.setString(5,p_out); -param
  
  / * cs.registerOutParameter(1,Types.CHAR);
  cs.registerOutParameter(2,Types.CHAR);
  cs.registerOutParameter(3,Types.CHAR);
  cs.registerOutParameter(4,Types.CHAR); * /
  cs.registerOutParameter(5,Types.CHAR);
  CS. Execute();
  getHTML = cs.getString (5);
  
  / * System.out.println ("getHTML is" + getHTML);
  
  CS. Close();
  If ("E".equals (ErrorExist))
  throw new OAException ("payment request is already cancelled");
  
  // */
  }
  
  catch (SQLException sqle)
  {
  try {cs.close (;})
  catch (Exception e) {}
  throw OAException.wrapperException (sqle);
  }
  Doctype string = paramDOC_TYPE;
  String docnum = paramDOC_NUM;
  
  String html;
  
  
  System.out.println ("paramDOC_TYPE in IMPL is" + doctype);
  System.out.println ("paramDOC_Numb in IMPL is" + docnum);
  
  
  GetHTML return;

  Hello
  Your package is to have different input parameters types,
  then the pkg func is xxx.get_log
  Get_Log (rmode in NUMBER, doc_type IN VARCHAR2 DEFAULT 'SUCH', IN VARCHAR2 DEFAULT NULL, annual
  doc_num IN VARCHAR2 DEFAULT NULL-, p_out out varchar2.
  )

  But you spend all String, could you please do it
  setInt rmode value,
  as

  cs.setInt (2, Integer.parseInt (paramRMODE));

  If paramRMODE is very large number, use setLong.

  Thank you

  With respect,
  Kali.
  OSSi.

• Thread: Error when calling a database adapter

  I got the following error when I invoke a task in the service process that contains the data adapter.
  
  LIAISON. JCA-12511
  JCA Binding Component connection problem.
  JCA Binding component is unable to create an outgoing connection of JCA (CCI).
  SaveMessageProject:LocalDB [LocalDB_ptt::insert (MessagesCollection)]: The JCA Binding component could not establish an outbound connection of JCA CCI due to the following problem: BINDING. JCA-12510
  Location of JCA resource adapter error.
  Cannot find the adapter in JCA resources via the element of the binding .jca file <-factory connections / >
  The Binding of JCA component is unable to startup of the resource adapter that is specified in the <-factory connections / > element: location = ' EI/DB/localDB.
  The reason is most likely to be
  (1) the resource adapter RAR file has not been deployed successfully to the WebLogic application server or
  (2) the "< jndi name >" element in weblogic - ra.xml has not been defined in eis/DB/localDB. In the latter case, you need to add a new factory of connections from WebLogic JCA (deploy a RAR).
  Please fix this and then restart the application server
  
  Please ensure that the JCA connection factory and dependent connection factories have been set up with a sufficient limit for maximum connections Please also make sure that the physical connection to the EIS server is available and the backend itself accepts connections.
  
  I miss nothing need to do on the weblogic?
  The steps I did to deploy are simply click on the service to deploy on Jdeveloper and following the wizard to deploy on the weblogic application server.
  
  Please help, I am so depressed on this subject.

  I guess that's #2, which means that you must create a Weblogic JDBC data source and also a connection pool. There are instructions to act quickly in the doc of installation Instructions here:

  http://www.Oracle.com/technetwork/middleware/soasuite/BPM-11g-sales-quote-demo-Setup-and--131283.zip

  Hope that helps you out of your depression :-)

• Error when calling bean 'delivery': waiting for reply has expired.

  Hello
  
  I run a process that currently catches an exception since a partnerlink. When the exception is caught, I send an email and the process stops. When I submit an application since the BPEL console, I have to wait the JTA timeout before the return of the page. However, the instance goes smoothly and I got the email before the time-out occurs. That's what I see in the newspapers. When I look at the audit workflow and activity, all activities were time-stamped before throwing exception. Has anyone seen this problem or knows what is happening. Is there a problem of in a catch block or catch-all mail?
  
  < 2009-04-19 22:33:41, 859 > < ERROR > < iCareTest.collaxa.cube > < BaseCubeSessionBean::logError > error when the bean 'delivery': waiting for reply has expired. The conversation id is cf9324c9be114336:513ede58:120c17e1922:-7 fc 0. Please check the detail process instance.
  com.oracle.bpel.client.delivery.ReceiveTimeOutException: waiting for reply has expired. The conversation id is cf9324c9be114336:513ede58:120c17e1922:-7 fc 0. Please check the detail process instance.
  
  Thanks in advance
  
  Jim

  There is no question why it happens to expire is because you don't have a response to the client in your tote.

  If you look at your processes, you will see that the default response is in the main field of application. When the Tote is called this response is in the past, that's why no reply is sent.

  Please answer in your catch all back to the client and it will work.

  see you soon
  James

• Error when calling a procedure using an external table with c#.

  Hello

  I'm developing an application scheduler with Visual Studio 2010 (c#) to start my PL/SQL procedures.

  Everything works fine with each procedure, but one who reads the contents of an external table.

  Strange thing is when I start the same procedure with Toad, I have no problem, but when I run with my c# code:

  OracleCommand cmdMET = new OracleCommand();

  cmdMET.CommandText = 'STG_AE. M_MET_S_EXT_DEFECT ';

  cmdMET.CommandType = CommandType.StoredProcedure;

  con = cmdMET.Connection;

  OracleParameter retvalMET = new OracleParameter ("value", OracleDbType.Varchar2, 50);

  retvalMET.Direction = ParameterDirection.ReturnValue;

  cmdMET.Parameters.Add (retvalMET);

  cmdMET.ExecuteNonQuery ();

  I got this error:

  ORA-29913: error in executing ODCIEXTTABLEFETCH legend

  ORA-01722: invalid number

  ORA-06512: at "STG_AE. M_MET_S_EXT_DEFECT', line 8

  ORA-06512: at "STG_AE. MET_SRC', line 10

  ORA-06512: at "STG_AE. PUTS", line 14

  ORA-06512: at line 1

  I can't understand why it works when I run it with Toad and why I get this error when launching of it with c#... Any advice would be great!

  Thank you!

  I can't understand why it works when I run it with Toad and why I get this error when launching of it with c#... Any advice would be great!

  The error led to think that a string to number conversion fails all by accessing the external table.

  What is the format of numeric fields in the external file?

  I'm guessing that your session NLS_NUMERIC_CHARACTERS setting is defined differently whether you're in your application c# or toad.

  Could check you on both?

• STAX error when running VMMark2 - STAX.bat - Service STAX unregistered

  Hi all

  I hope that someone can help you. I finished configuring all the systems required to run VMmark 2.5. I set up the primeclient and the client0 on the same computer, Windows 2008 R2 x 64 but when I run VMMark2 - STAX.bat I get the following error:

  Machine Service STAX: local

  Name of the Service STAX: STAX

  WARNING: The service STAX is not registered on the specified computer.

  Check the properties of the STAX monitor.

  However, StafProc.exe seems to be running.

  I can't find all the logs that might point me in the right direction and the only info I found on the forum in this regard is the next post, which did not solve my problem (https://communities.vmware.com/thread/449927?start=0 & tstart = 0)

  Any help would be appreciated.

  Thank you, Charlie

  Sorry, I was being a fool and had saved staf.cfg to c:\staf\ not c:\staf\bin\! Once the correct config was in place he has obviously sprang into life!

• Error when calling sous-modèle with the table for the invoice

  I have an invoice template setup and I need to call different tables based on which company they are run for. Calling the separate from the headers and footers of model sub works fine but when I try to use the approach of template void for the body of the invoice I get an error of caused by: oracle.xdo.parser.v2.XMLParseException: element 'when' not found in ' xsl: choose '.
  
  During the validation of the model sub I get error of * [031111_102337143] [] [ERROR] [line 427.180] illegal closure context XSL table: xsl: choose *.
  
  I think I have to use a different model for the body because a given business xml is one completely different structure than the others, but also the structure of the table.
  
  
  Any help would be greatly appreciated as this is the critical moment
  
  Thank you

  I sent you the modified model. Take a peek inside.

  Thank you
  BIPuser

• Error when calling process of BSE of a BPEL process

  Hi all
  
  We have an obligation to call a BSE process from a BPEL process. We use an adapter wth BSE WSDL url. After you deploy the BPEL process registered BSE is called for most values while all of a sudden some values return the followign error
  
  * "' invoke exception on JaxRpc: transport HTTP error: javax.xml.soap.SOAPException: java.security.PrivilegedActionException: javax.xml.soap.SOAPException: Message send failed: connection reset" * "
  
  The problem here is, if we re - rerun the process with the same values, the BSE is called successfully! How is it possible for an error process and function normally for the same inputs?
  
  What could be the possible fix for this? I'm grateful for any input on this.
  
  Vijay

  Hi Vijay,

  It is a bug and you can refer to metalink note:
  "Application Patch 7445876 results in"java.lang.NullPointerException"error. [942575.1 ID] "for reference.

  Also, you can consult the following link:
  "http://puchaanirudh.blogspot.com/2008/12/exception-on-jaxrpc-invoke-http.html" also.

  Thank you
  Vishwanath.

• Error when calling model sup in the XML editor

  Hi friends,
  For the part of the header of my report, I create a template void and I try to call it.
  I called the sub model by using the following commands: -.
  <? call@inlines:header? >
  <? end call? >
  Then in the body, I'm importing this file using the <? import:file:///C:\sreekanth\Header.RTF? >
  When I run the report I get the following error
  Due to: java.io.FileNotFoundException: /C:\sreekanth\Header.rtf (no such file or directory)
  Please help me.
  I can't find the reason for the error.
  But when I run it on the spot, it works fine.
  Is no problem when I create the submodel? What are the steps to create a sub termplate?

  Hello

  the BI Publisher Forum may be a better place for you to get a response than the reports Forum.

  Concerning
  Rainer

• Anyone who has already seen this error when calling a dll? "Arbitrary.dll?"

  Hey people, I enclose a jpg of the error I get whenever I try and load a vi whose subVIs call a 'library function call '.

  "Double click call function I can check that the ' name of the library or the path ' is correct, and the function name is what I want.

  I do not understand why it tells me I need to "Arbitrary.dll" - the name of the lib is adwgc.dll as shown in the path (I checked).

  Anyone who deals with this error before?  I am naïve enough at the moment, any help will be appreciatized and surely kudo would be!

  Thank you

  -pat

  Edit-also, I'm using LV 2011

  You get this error because adwgc.dll is responsible Arbitrary.dll because internally that whoever wrote adwgc.dll called a function in Arbitrary.dll. Is the only one with this problem to obtain Arbitrary.dll and place it in a folder that adwgc.dll can load it. Put it in the same folder as adwgc.dll should work.

  Where did you get adwgc.dll to and are you sure they provide Arbitrary.dll as well?

• Why do a "not a valid win 32 application error when you try to download service pack 3 for xp? How can I fix it?

  Recently, my computer crashed and had to be reloaded with XP. Kinda weird Explorer that all text is very very low. I tried to adjust the resolution and have implemented the automatic updates. I thought that installing service pack 3 could help, but I can't download. I get the Win 32 application error. Can anyone help?

  You download the SP3 on the website?

  try to get SP3 installed using Windows Update utility (start > all programs > Windows Update) and see if it will install that way.

  Hope this helps

  Response if it did not work

• Return simultaneous errors when called more then once in a workflow

  Hello

  When I call the OKCREPMA workflow, I have a business need to run the kernel OKC_REP_CON_APPR_ATTACH simultaneous more than once, the first time he's going very well, but when I call it once again in the same workflow, it throws the following exception:

  oracle.apps.fnd.framework.OAException: Application: DNF, Message name: FND_GENERIC_MESSAGE. Chips: MESSAGE = java.sql.SQLException: ORA-20001: SQL_PLSQL_ERROR: N, ROUTINE, MO_GLOBAL. INIT, N, ERRNO,-20001, N, REASON, ORA-20001: SQL_PLSQL_ERROR: N, ROUTINE, MO_GLOBAL. SET_ORG_ACCESS, N, ERRNO,-20001, N, REASON, ORA-20001: APP-FND-02938: Falha na multiorganizacoes ao iniciar uma sessao soum para o produto: & PRODUCT. Informed seu suporte representative.

  ORA-06512: em 'APPS. FND_MESSAGE', line 509

  ORA-06512: em 'APPS. MO_GLOBAL', line 36

  ORA-06512: em 'APPS. MO_GLOBAL', line 757

  ORA-06512: em 'APPS. MO_GLOBAL', line 700

  ORA-06512: em line 1;

  Anyone have any hint on how to solve this problem?

  Kind regards

  Adelmo

  1. go in the liability: System Administrator

  2. go to profile > system.

  3 ask MO: the safety profile and MB: operational unit, set the value of the level of responsibility

  4. test the issue again.

  Please close the thread by marking as replied with correct/good, if its response.