Error when calling sous-modèle with the table for the invoice

Similar Questions

• Error when calling a procedure using an external table with c#.

  Hello

  I'm developing an application scheduler with Visual Studio 2010 (c#) to start my PL/SQL procedures.

  Everything works fine with each procedure, but one who reads the contents of an external table.

  Strange thing is when I start the same procedure with Toad, I have no problem, but when I run with my c# code:

  OracleCommand cmdMET = new OracleCommand();

  cmdMET.CommandText = 'STG_AE. M_MET_S_EXT_DEFECT ';

  cmdMET.CommandType = CommandType.StoredProcedure;

  con = cmdMET.Connection;

  OracleParameter retvalMET = new OracleParameter ("value", OracleDbType.Varchar2, 50);

  retvalMET.Direction = ParameterDirection.ReturnValue;

  cmdMET.Parameters.Add (retvalMET);

  cmdMET.ExecuteNonQuery ();

  I got this error:

  ORA-29913: error in executing ODCIEXTTABLEFETCH legend

  ORA-01722: invalid number

  ORA-06512: at "STG_AE. M_MET_S_EXT_DEFECT', line 8

  ORA-06512: at "STG_AE. MET_SRC', line 10

  ORA-06512: at "STG_AE. PUTS", line 14

  ORA-06512: at line 1

  I can't understand why it works when I run it with Toad and why I get this error when launching of it with c#... Any advice would be great!

  Thank you!

  I can't understand why it works when I run it with Toad and why I get this error when launching of it with c#... Any advice would be great!

  The error led to think that a string to number conversion fails all by accessing the external table.

  What is the format of numeric fields in the external file?

  I'm guessing that your session NLS_NUMERIC_CHARACTERS setting is defined differently whether you're in your application c# or toad.

  Could check you on both?

• I bought the 14 for Mac adobe elements.  Is there a download error.  I received an email with the serial number, but when I went on the site to download the illustrated product was 14 for Windows.  What is the download link for adobe elements 14

  I bought the 14 for Mac adobe elements.  Is there a download error.  I received an email with the serial number, but when I went on the site to download the illustrated product was 14 for Windows.  What is the download link for adobe elements 14 for Mac?

  Download & install instructions https://forums.adobe.com/thread/2003339 can help

  -includes a link to access a page to download the Adobe programs if you do not have a disk or drive

  -Cloud desktop http://helpx.adobe.com/creative-cloud/help/creative-cloud-desktop.html

  -Cloud Getting Started https://helpx.adobe.com/creative-cloud.html

  -you will need to enter your original serial number during the installation for non-Cloud programs

  - or kglad links in response to #1 here can help https://forums.adobe.com/thread/2081216

  Also go to https://forums.adobe.com/community/creative_cloud/creative_cloud_faq

• Hello! I have a problem with the change of the method of payment. PMT_000008 error, when I'm trying to change the method of payment. Help, please!

  PMT_000008 error, when I'm trying to change the method of payment. Help, please! Cookies are cleaned, tried different browsers. It does not help.

  Since this is an open forum, not Adobe support... you must contact Adobe personnel to help

  Chat/phone: Mon - Fri 05:00-19:00 (US Pacific Time)<=== note="" days="" and="">

  Don't forget to stay signed with your Adobe ID before accessing the link below

  Creative cloud support (all creative cloud customer service problems)

  http://helpx.Adobe.com/x-productkb/global/service-CCM.html

• error when calling NtSetTimerResolution in NTDLL 1097. DLL

  I get 1097 error when calling NtSetTimerResolution in NTDLL. DLL. why?   I scoured most of the posts on this forum describing the 1097 error and tried the solutions without success.

  This is a link to the function prototype (copied below) that I adapted in the node call the attached vi library (you will be asked to locate NTDLL. DLL on your system when opening it)

  NtSetTimerResolution and NtQueryTimerResolution are defined as follows. All hours are stated in hundreds of nanoseconds.

  NTSTATUS NtSetTimerResolution (
  IN ULONG RequestedResolution,
  IN BOOLEAN defined.
  ON PULONG ActualResolution
  );

  Parameters

  RequestedResolution

  The desired timer resolution. Must be the legal scope of the system timer values supported by NT. The standard x 86 systems it's 1 to 10 milliseconds. The values that are within the acceptable limits are rounded to the next higher standard x 86 HAL millisecond limit. This parameter is ignored if the Set parameter is set to FALSE.

  Set

  This is TRUE if we ask a new resolution of the clock, and FALSE if the application is indicating that he hasn't needed a resolution already implemented.

  ActualResolution

  The resolution of timer in effect once the call is returned in this parameter.

  Woohoo! I solved the problem.

  I was using a copy of NTDLL. DLL C:\Drivers\I386\SYSTEM32\NTDLL here. DLL (version 5.1.2600.1106)

  instead of C:\WINDOWS\system32\ntdll.dll here (version 5.1.2600.5755).

  An observation aside Interestingly enough, I did, when I tried to put the old version in C:\WINDOWS\system32 to see if it was just a problem of dependence, rather than a version number, I couldn't do it!  I tried renaming C:\WINDOWS\system32\ntdll.dll C:\WINDOWS\system32\ntdll.dll.old and immediately a replacement c:\windows\system32\ntdll.dll pop up would be in his place! I even tried to drag / drop of C:\Drivers\I386\SYSTEM32\NTDLL. DLL C:\WINDOWS\system32\ntdll.dll, it seemed to replace, but a system of security immediately replaced it with the latest version.   WinXP is smarter than I thought, or maybe something like Microsoft Windows Defender Antispyware installed by our company does this.

  In any case, I've confirmed lateer version is necessary because when I copied C:\WINDOWS\system32\ntdll.dll to C:\Drivers\I386\SYSTEM32\NTDLL. DLL, it also solves the problem.

  You might well ask why I did not use the correct version in the first place - well not knowing where he was, I only noticed the old version when I searched for it with my Google Desktop.

  Rgds

• Error: A connection has been established with the server, but then an error occurred during the connection process.

  Hello

  I have MsSql running in the cluster environment and recently face the problem when there is a security agent installed in MsSql server, which the agent does nothing but only to capture the local database activity. The error led is as below:

  ID from step 1

  Server NIBKSQLCLUST

  Job name LSBackup_DRIB

  Newspaper log shipping backup job step name.

  Time 00:00:02

  SQL severity 0

  SQL Message ID 0

  Operator by e-mail

  Operator Net sent

  Operator paged

  Retries attempted 0

  Message

  2011-03-21 08:00:02.62 * error: could not retrieve parameters of backup for primary ID '26f46141-a676-41b2-8653-11f1b13de43a '. (Microsoft.SqlServer.Management.LogShipping) *.

  2011-03-21 08:00:02.63 * error: could not connect to the server NIBKSQLCLUST. (Microsoft.SqlServer.ConnectionInfo) *.

  2011-03-21 08:00:02.63 * error: a connection has been established with the server, but then an error occurred during the connection process. (provider: Named Pipes Provider, error: 0 - no process is on the other end of the pipe.) (.Net SqlClient data provider) *.

  2011-03-21 08:00:02.63 - END OF THE TRANSACTION LOG BACKUP-

  The process to run correctly when I turned off the security officer. Advice kindly the cause of this problem and is where all configurations should be set / changed in MsSql server.

  Thank you

  Boonlep coulibaly

  Hello

  I suggest you to send your request from the link and check.

  http://msdn.Microsoft.com/en-us/hh361695.aspx

  http://msdn.Microsoft.com/en-us/library/bb545450.aspx

• After submitting my info, I had the SERVER ERROR: 500 internal server error! There is a problem with the resource you are looking for, and it cannot be displayed. :

  Over the four days, I've lost two e-mail accounts:

  1 * e-mail address is removed from the privacy *

  2nd * e-mail address is removed from the privacy *

  I went to www.windowslivehelp.com

  I filled in all the information and answered all the question. I provided

  the email address where I can be reached: * address email is removed from the privacy *

  But when I click on submit

  "The display shows:" Server error

  500 internal Server Error. There is a problem with the resource you

  can are looking for, and it cannot be displayed' you explain or tell me

  How can I return my email accounts. Thank you and best regards

  B.Okediji sanogo

  {deleted}

  E-mail address is removed from the privacy *.

  Hi Zacheus B.Okediji,

  1. what web browser do you use?

  2. when the problem started?

  The website you are visiting had a server problem preventing the display of the Web page. It often occurs due to maintenance of the site, or due to a programming error on interactive websites that use scripts.

  For more information, see the following article:

  Get help with the Web site (HTTP error) error messages.

  If you use Internet Explorer, you can read the following article and try steps 2, 3 and 4 to solve the problem.

  Internet Explorer is slow? 5 things to try

  Note: Resetting the Internet Explorer settings is not reversible. After a reset, all previous settings are lost and cannot be recovered.

  You can also visit the following links to support Windows Live:

  "Server too busy", "Internal Server Error" and we do little maintenance to improve the service.

  Internal server error when trying to open hotmail

  Hope this information is useful.

• My Lexmark printer stopped working and the error message says "printer cannot communicate with the computer" (from "twisted into the USB pins?).

  When my printer stopped working because of error messages about "printer cannot communicate with the computer" (from "twisted into the USB pins?), I tried to change to 2nd USB port without success. I tried a new cable; that did not help.

  Then I uninstalled and reinstalled my Lexmark printer and changed the error message. Now, the printer does not work because "the USB device is not recognized."

  I tried to update the chips; Use 1 USB port; and using the old cable, all this without success. I checked the connections of the cable to the printer and the PC and turn on the printer and goes off; I'm out of ideas. Any other suggestions?

  Hi ChristineKrause,
   

  Here are some links that might help you:

  Peripheral USB is not recognized when you attach it immediately after that your Windows XP computer comes out of standby or hibernation

  Advanced troubleshooting tips for General USB for Windows XP problems

  Try the steps listed in the items mentioned above and see if that helps you solve the problem.

• There was an error when you attempt to connect to the Windows Live Calendar service.

  I get this message when trying to update my calendar:

  There was an error when you attempt to connect to the Windows Live Calendar service. If the error persists, check if there is an upgrade of Windows Live Mail available or communicate with the service.

  What can I do to fix this?

  Hello Maurizo Martino,

  As your question deals with Windows Live Calendar, there is a forum for Windows Live products.
  Please post in http://windowslivehelp.com/ under the category of Windows Live Mail.

  They will have experts in the Windows Live products that can better help you.

  Sincerely,

• Failed to perform recovery of factory setting - error 0x8007045D Code / product key error - "ERROR!" We encountered a problem with the request for approval.

  Original title: product key error

  Hi all...

  I have ' tried to download the disc Image of Windows 7 (ISO file), but when I insert my product key, the system cannot check it.
  I use the laptop Sony Vaio VPC EG35EG with preinstalled Windows 7 Home Basic 64 bit inside.
  Now, after that there is error (I cannot yet perform plant pose recovery; always finished with error 0x8007045D Code), I need to install clean my laptop with the USB or DVD Installer key. But then, when I try to download it, my product key (I found it on the sticker at the bottom of the laptop) are not validated by microsoft. It is said:

  "ERROR!" We encountered a problem with the request for approval.

  What should I do now? Y does it can someone help me?
  Thank you.

  Consider the following text:

  How to: What are my options for Windows 7 reinstall media?

  Make sure you scroll down and read the section:

  What to do if you cannot get your manufacturer recovery media, refuse to use or to buy it or the Microsoft Software Recovery Website does not work?

  also check:

  https://techingiteasy.WordPress.com/2012/04/13/how-to-activate-Windows-7-OEM-license-using-a-retail-disc/

• "' Windows live mail error ' there was an error when you attempt to connect to the Windows Live Calendar service.

  Original title: when I start my windows live mail. He asks me if I want to go online? Then, I get this error message? just started doing this yesterday?

  There was an error when you attempt to connect to the Windows Live Calendar service. If the error persists, check if there is an upgrade of Windows Live Mail available or communicate with the service.

  I'm going to ask you to start your own, new topic in this forum now for Windows Live technicians can help you more-online http://answers.microsoft.com/en-us/windowslive/forum/livemail-calendar

  Tip: Include a link to this topic in your very first post so that Windows Live people know so much about your computer like I do.

  Good luck - I think that you're going to need!

• HRSSA - error when using details of FYI with new Notification hire

  
  We are 12.1.3 implmenting HRSSA (Manager Self Service) and are a problem, try to use the parameter of FYI details with the new hiring process in Manager Self Service.  Currently, I have a beautiful SR with Oracle, but I was wondering if someone could give me advice on what else to try.  I put the & pNtfFyiDetails = Y in the function HR_NEW_HIRE_MGR_SS and it causes an error.  We have no problem with the change of status of worker using the FYI notification details, it normally ends and sends details of FYI in email notification.

  I put the parameter in the HR_NEW_HIRE_MGR_SS se and then also added to the HR_NEW_HIRE_MGR function.  I did a search on the internet and found a post where the answer has been added to these two functions.  He mistakes so be it.  Enamel is actually ever sent to the recipient FYI and the notification in the worklist application has the same error as seen through workflow status monitor when I click on the notification:

  oracle.apps.fnd.framework.OAException: java.sql.SQLException: ORA-20001:

  ORA-06512: at "APPS.HR_NEW_USER_REG_SS", line 162

  ORA-06512: at line 1

  There is a Bug on the site of oracle, who suggested adding a patch that would bring versions of the package at a certain level.  We are already beyond this level of version.

  Someone had problems with this or know what it is, we can try to work around it and get details of FYI to appear in the notification.

  Thank you.

  This problem has been fixed by the support of Oracle providing a patch.

• Thread: Error when calling a database adapter

  I got the following error when I invoke a task in the service process that contains the data adapter.
  
  LIAISON. JCA-12511
  JCA Binding Component connection problem.
  JCA Binding component is unable to create an outgoing connection of JCA (CCI).
  SaveMessageProject:LocalDB [LocalDB_ptt::insert (MessagesCollection)]: The JCA Binding component could not establish an outbound connection of JCA CCI due to the following problem: BINDING. JCA-12510
  Location of JCA resource adapter error.
  Cannot find the adapter in JCA resources via the element of the binding .jca file <-factory connections / >
  The Binding of JCA component is unable to startup of the resource adapter that is specified in the <-factory connections / > element: location = ' EI/DB/localDB.
  The reason is most likely to be
  (1) the resource adapter RAR file has not been deployed successfully to the WebLogic application server or
  (2) the "< jndi name >" element in weblogic - ra.xml has not been defined in eis/DB/localDB. In the latter case, you need to add a new factory of connections from WebLogic JCA (deploy a RAR).
  Please fix this and then restart the application server
  
  Please ensure that the JCA connection factory and dependent connection factories have been set up with a sufficient limit for maximum connections Please also make sure that the physical connection to the EIS server is available and the backend itself accepts connections.
  
  I miss nothing need to do on the weblogic?
  The steps I did to deploy are simply click on the service to deploy on Jdeveloper and following the wizard to deploy on the weblogic application server.
  
  Please help, I am so depressed on this subject.

  I guess that's #2, which means that you must create a Weblogic JDBC data source and also a connection pool. There are instructions to act quickly in the doc of installation Instructions here:

  http://www.Oracle.com/technetwork/middleware/soasuite/BPM-11g-sales-quote-demo-Setup-and--131283.zip

  Hope that helps you out of your depression :-)

• The Apple Magic Keyboard can operate without bluetooth when connected to an iPad with the lightning to the USB camera adapter?

  The Apple Magic Keyboard can operate without bluetooth when connected to an iPad with the lightning to the USB camera adapter?

  I love the Apple Magic Keyboard to be very light (I want it with me everywhere). I also like that I can choose the layout of the keyboard I want (Canadian multilingual), which is not available on any keyboard for any brand, with the exception of Apple iPad (and I did a ton of research). I have problems with the old model of keyboard Apple Wireless because of the Bluetooth connection: I often have trouble connecting. I want a reliable keyboard. I don't like having to plug the keyboard on the iPad, and I think that a wired keyboard can more reliable and safer than a wireless keyboard. And a wired keyboard never had battery problems.

  I read that the Apple Magic Keyboard can work wired with a Mac without bluetooth. And I read that some USB keyboards work with lightning to the USB camera adapter. There are several keyboards with a cable (Belkin or Logitech) lightning, but none with the available Canadian multilingual.

  So, if I buy a magical keyboard Apple and a Flash to the USB adapter of the camera, according to my needs, I'll be satisfied or I'm going to be disappointed?

  A better solution would be to have a male-male cable lightning between the keyboard and the iPad, but I don't find any of these products anywhere.

  Thank you.

  It will not work. And where did you read that the keyboard works wired with a Mac?

• When I try to type with the keys that have numbers on them, I have numbers instead of letters.

  The keyboard of my laptop does not work correctly.

  I have somehow turned the keys of the calculator and when I try to type with the keys that have numbers on them, I have numbers instead of letters.  Does anyone know how to disable this option?

  I use a laptop with a wireless keyboard to send this message, but want to use my laptop keyboard.
  Help!

  Hi newsgirl,.

  Somewhere at the top of the laptop keyboard is a key that says Num Lock (or Num Lk or something like that).  It can be accessed directly, or you may need to press a key to access (or some other keys).  In any case, you must click this to turn off the number lock because it is what causes the problem.  This key is usually used on laptops to create a section of a regular keyboard that can act as the normal keyboard calculator keypad (for those who need that, like accountants or persons who need to enter strings of numbers).  Once you turn it off, you will be fine as the keyboard returns to normal.

  I hlpe that aid.

  Good luck!