error when calling NtSetTimerResolution in NTDLL 1097. DLL

Similar Questions

• Loading of a DLL on RT: Missing Export "DecodePointer" "Kernel32.dll" and 7 error when calling the DLL

  Hi, I recently changed to Visual Studio 2010 and Windows 7 64-bit.

  I have an existing Office RT system running RT 2009.  This system calls a DLL that I already built using Visual Studio .net 2003 and Windows XP.

  Since I've recompiled the DLL I get an error 7 file not found error when I call the RT DLL, even if I simply replaced the old DLL with a new one in the file system so the path has not changed.

  I also noticed that the message on the screen connected to the RT system during startup:

  "achieveworldpeace.dll" load error: lack of export 'DecodePointer' of ' Kernel32.dll'.

  Any ideas on this problem?  It is perhaps as simple as a switch in the compiler?

  Thank you.

  I'm not sure it's a simple switch in the project settings in Visual C. The problem is clearly in the standard C runtime library that gets linked to your DLL and refers to exports of Windows which are not available on the RT system. Don't forget that the RT system is a limited Win32 API emulation.

  I usually avoid these problems using Visual C 6 to create DLLs for LabVIEW projects. The standard library of the C runtimes will not know what Windows API reference more recent exports because they have supported even under Win95. So unless your explicitedly reference code not supported RT APIs you wouldn't have problems. If you do not use the standard C file i/o functions and management of memory in your DLL functions, you can also try to link statically C runtime libraries in your DLL, or vice versa depending on what you have now. It may or may not work. Otherwise there is not much else but by using an earlier version of Visual Studio.

• Anyone who has already seen this error when calling a dll? "Arbitrary.dll?"

  Hey people, I enclose a jpg of the error I get whenever I try and load a vi whose subVIs call a 'library function call '.

  "Double click call function I can check that the ' name of the library or the path ' is correct, and the function name is what I want.

  I do not understand why it tells me I need to "Arbitrary.dll" - the name of the lib is adwgc.dll as shown in the path (I checked).

  Anyone who deals with this error before?  I am naïve enough at the moment, any help will be appreciatized and surely kudo would be!

  Thank you

  -pat

  Edit-also, I'm using LV 2011

  You get this error because adwgc.dll is responsible Arbitrary.dll because internally that whoever wrote adwgc.dll called a function in Arbitrary.dll. Is the only one with this problem to obtain Arbitrary.dll and place it in a folder that adwgc.dll can load it. Put it in the same folder as adwgc.dll should work.

  Where did you get adwgc.dll to and are you sure they provide Arbitrary.dll as well?

• Error when calling Fusion R9 on Service SOAP premise of JDeveloper 11.1.1.7

  Hi team,

  Here is the WSDL Iam I invoke:

  . http://fusionapp < clientName > .com:10607/prcPorCreateReq/CreateReqService? WSDL

  OER WSDL, example: https://fusionappsoer.oracle.com/oer/custom/r9/oer/oracle/apps/prc/por/createReq/createReqService/CreateReqService.wsdl

  Client Java code:

  public static void main(String [] args)
    {
        //setup security feature with OWSM policy
        SecurityPolicyFeature[] securityFeature =        new SecurityPolicyFeature[] { new       SecurityPolicyFeature("oracle/wss_username_token_client_policy") };
      createReqService_Service = new CreateReqService_Service();
      CreateReqService createReqService = createReqService_Service.getCreateReqServiceSoapHttpPort(securityFeature);
      // Get the request context to set the outgoing addressing properties
      WSBindingProvider wsbp = (WSBindingProvider)createReqService;
      WSEndpointReference replyTo =   new WSEndpointReference("http://fusionapp.techmahindra.com:10607/prcPorCreateReq/CreateReqService?WSDL", WS_ADDR_VER);
      String uuid = "uuid:" + UUID.randomUUID();
      wsbp.setOutboundHeaders( new StringHeader(WS_ADDR_VER.messageIDTag, uuid), replyTo.createHeader(WS_ADDR_VER.replyToTag));
      
        // Add Security Headers below if any Authentication is required.
        wsbp.getRequestContext().put(WSBindingProvider.USERNAME_PROPERTY,       "nitin");
        wsbp.getRequestContext().put(WSBindingProvider.PASSWORD_PROPERTY,       "Welcome123");
        // Add your code to call the desired methods
        long requisitionHeaderId =1234 ; 
        
        RequisitionHeader variableName; 
  
      // Add your code to call the desired methods.
          try {
              System.out.println("Invoking get req method");
              variableName = createReqService.getRequisitionHeader(requisitionHeaderId);
          } catch (ServiceException e) {
          }
      }
  

  Policy feature of security referred to in the WSDL document

  "" < policyReference xmlns:wsp= "http://schemas.xmlsoap.org/ws/2004/09/policy" " URI="#wss_saml_or_username_token_service_policy" wsdl: required="false"/ >"
  "" < policyReference xmlns:wsp= "http://schemas.xmlsoap.org/ws/2004/09/policy" " URI="#wsaddr_policy" wsdl: required="false"/ >"
  "< wsdl: Operation name="getRequisitionHeader">"

  Exception when calling

  C:\Oracle\MiddlewareJdev11117\jdk160_24\bin\javaw.exe -client -classpath D:\Sridhar\Software\p17888411_R12_GENERIC\jdevhome\jdev\mywork\FusionR9CreateReqServ\.adf;D:\Sridhar\Software\p17888411_R12_GENERIC\jdevhome\jdev\mywork\FusionR9CreateReqServ\FusionR9CreateReqServ\classes;C:\Oracle\MiddlewareJdev11117\wlserver_10.3\server\lib\weblogic.jar;C:\Oracle\MiddlewareJdev11117\oracle_common\modules\oracle.jrf_11.1.1\jrf.jar;C:\Oracle\MiddlewareJdev11117\modules\com.oracle.toplink_1.0.0.0_11-1-1-5-0.jar;C:\Oracle\MiddlewareJdev11117\modules\org.eclipse.persistence_1.1.0.0_2-1.jar;C:\Oracle\MiddlewareJdev11117\modules\com.bea.core.antlr.runtime_2.7.7.jar;C:\Oracle\MiddlewareJdev11117\modules\javax.persistence_1.0.0.0_2-0-0.jar;C:\Oracle\MiddlewareJdev11117\oracle_common\modules\oracle.webservices_11.1.1\wsclient.jar -Djavax.net.ssl.trustStore=C:\Oracle\MiddlewareJdev11117\wlserver_10.3\server\lib\DemoTrust.jks com.oracle.xmlns.apps.prc.por.createreq.createreqservice.CreateReqServiceSoapHttpPortClient
  Jun 3, 2015 5:23:59 PM weblogic.wsee.jaxws.spi.WLSServiceDelegate addWsdlDefinitionFeature
  SEVERE: Failed to create WsdlDefinitionFeature for wsdl location: http://fusionapp.techmahindra.com:10607/prcPorCreateReq/CreateReqService?WSDL, error: com.sun.xml.ws.wsdl.parser.InaccessibleWSDLException, message: 2 counts of InaccessibleWSDLException.
  SEVERE: java.io.FileNotFoundException: .\config\jps-config.xml (The system cannot find the path specified)
  SEVERE: java.io.FileNotFoundException: .\config\jps-config.xml (The system cannot find the path specified)
  INFO: WSM-09004 Component auditing cannot be initialized.
  Invoking get req method
  INFO: Recipient Alias property not configured in the policy. Defaulting to encrypting with signers certificate.
  Exception in thread "main" javax.xml.ws.soap.SOAPFaultException: access denied (oracle.wsm.security.WSFunctionPermission http://xmlns.oracle.com/apps/prc/por/createReq/createReqService/CreateReqService#getRequisitionHeader invoke)
   at com.sun.xml.ws.fault.SOAP11Fault.getProtocolException(SOAP11Fault.java:197)
   at com.sun.xml.ws.fault.SOAPFaultBuilder.createException(SOAPFaultBuilder.java:122)
   at com.sun.xml.ws.client.sei.SyncMethodHandler.invoke(SyncMethodHandler.java:125)
   at com.sun.xml.ws.client.sei.SyncMethodHandler.invoke(SyncMethodHandler.java:95)
   at com.sun.xml.ws.client.sei.SEIStub.invoke(SEIStub.java:136)
   at $Proxy43.getRequisitionHeader(Unknown Source)
   at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
   at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
   at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
   at java.lang.reflect.Method.invoke(Method.java:597)
   at weblogic.wsee.jaxws.spi.ClientInstanceInvocationHandler.invoke(ClientInstanceInvocationHandler.java:84)
   at $Proxy44.getRequisitionHeader(Unknown Source)
   at com.oracle.xmlns.apps.prc.por.createreq.createreqservice.CreateReqServiceSoapHttpPortClient.main(CreateReqServiceSoapHttpPortClient.java:56)
  Process exited with exit code 1.
  

  Please let me know how to configure the java client based on the WSDL file secuirity policy. I would like to know where iam missing.

  I have raised several MOS - SR Oracle, but no response until now.

  Concerning

  Sridhar

  Here's the code that worked:

  Public Shared Sub main (String [] args)

  {

  installation with GOSA policy security feature

  SecurityPolicyFeature [] securityFeature = new SecurityPolicyFeature [] {new SecurityPolicyFeature("oracle/wss_username_token_client_policy")};

  currenciesService_Service = new CurrenciesService_Service();

  CurrenciesService currenciesService = (securityFeature) currenciesService_Service.getCurrenciesServiceSoapHttpPort;

  Get the request context to set the outgoing address properties

  WSBindingProvider wsbp = (WSBindingProvider) currenciesService;

  ReplyTo = WSEndpointReference

  new WSEndpointReference ("http://fusionapp.techmahindra.com:7406/finGlCurrManageRateSetupService/CurrenciesService?") WSDL"(, WS_ADDR_VER);"

  String uuid = "uuid:" + UUID.randomUUID ();

  wsbp.setOutboundHeaders (new StringHeader (WS_ADDR_VER.messageIDTag, uuid), replyTo.createHeader (WS_ADDR_VER.replyToTag));

  Add headers of following security if authentication is required.

  wsbp.getRequestContext () .put (WSBindingProvider.USERNAME_PROPERTY, "FAADMIN");

  wsbp.getRequestContext () .put (WSBindingProvider.PASSWORD_PROPERTY, "Welcome1");

  String conversionType = "Corporation."

  VariableName of DailyConversionType;

  Add your code to call the desired methods.

  try {}

  System.out.println ("method call");

  variableName = currenciesService.getDailyConversionType (conversionType);

  System.out.println ("Value of the Variable name-->" + VariableName);

  System.out.println ("Data-->" + variableName.attribute1);

  System.out.println ("Type of Conversion-->" + variableName.conversionType);

  } catch (ServiceException e) {}

  }

  }

  Concerning

  Sridhar

• error when calling a function package

  any idea why my object is slip out during a function call. the error is
  oracle.apps.fnd.framework.OAException: java.sql.SQLException: ORA-06502: PL/SQL: digital or value error: character of number conversion error
  ORA-06512: at line 1
  
  It errors when cs.execute () is. What is the investment? Thanks for the help...
  
  
  then the pkg func is xxx.get_log
  Get_Log (rmode in NUMBER, doc_type IN VARCHAR2 DEFAULT 'SUCH', IN VARCHAR2 DEFAULT NULL, annual
  doc_num IN VARCHAR2 DEFAULT NULL-, p_out out varchar2.
  )
  RETURN varchar2 IS...
  
  the co
  _______________
  ParamDocLocatorParamList serializable [] = {paramRMODE, paramDOC_TYPE, paramDOC_ID, paramDOC_NUM, p_out};
  
  Am = (OAApplicationModule) pageContext.getApplicationModule (webBean) OAApplicationModule;
  OADBTransaction dbtrans;
  OAViewObject docLocator = (OAViewObject) am.findViewObject ("DocLocatorVO1");
  
  rtxt0. SetValue (pageContext, "here it is" + am.invokeMethod ("getHTMLString", paramDocLocatorParamList));
  docLocator.executeQuery ();
  
  
  am.invokeMethod ("getHTMLString", paramDocLocatorParamList);
  
  
  _____________________
  
  the impl
  
  public String getHTMLString (String paramRMODE, String paramDOC_TYPE, String paramDOC_ID, String paramDOC_NUM, String p_out)
  {
  System.out.println ("enter the Impl AM");
  
  
  CallableStatement st = null;
  // {
  TXN OADBTransaction = (OADBTransaction) getDBTransaction ();
  Connection Conn = txn.getJdbcConnection ();
  
  String sql = "START: 5: = test_proc.get_log (: 1,: 2: 3: 4);" END; ";
  
  CallableStatement cs = txn.createCallableStatement(sql,1);
  String ErrorExist = "";
  String getHTML = "";
  
  Try
  {
  cs.setString (1, paramRMODE);
  cs.setString (2, paramDOC_TYPE);
  cs.setString (3, paramDOC_ID);
  cs.setString (4, paramDOC_NUM);
  cs.setString(5,p_out); -param
  
  / * cs.registerOutParameter(1,Types.CHAR);
  cs.registerOutParameter(2,Types.CHAR);
  cs.registerOutParameter(3,Types.CHAR);
  cs.registerOutParameter(4,Types.CHAR); * /
  cs.registerOutParameter(5,Types.CHAR);
  CS. Execute();
  getHTML = cs.getString (5);
  
  / * System.out.println ("getHTML is" + getHTML);
  
  CS. Close();
  If ("E".equals (ErrorExist))
  throw new OAException ("payment request is already cancelled");
  
  // */
  }
  
  catch (SQLException sqle)
  {
  try {cs.close (;})
  catch (Exception e) {}
  throw OAException.wrapperException (sqle);
  }
  Doctype string = paramDOC_TYPE;
  String docnum = paramDOC_NUM;
  
  String html;
  
  
  System.out.println ("paramDOC_TYPE in IMPL is" + doctype);
  System.out.println ("paramDOC_Numb in IMPL is" + docnum);
  
  
  GetHTML return;

  Hello
  Your package is to have different input parameters types,
  then the pkg func is xxx.get_log
  Get_Log (rmode in NUMBER, doc_type IN VARCHAR2 DEFAULT 'SUCH', IN VARCHAR2 DEFAULT NULL, annual
  doc_num IN VARCHAR2 DEFAULT NULL-, p_out out varchar2.
  )

  But you spend all String, could you please do it
  setInt rmode value,
  as

  cs.setInt (2, Integer.parseInt (paramRMODE));

  If paramRMODE is very large number, use setLong.

  Thank you

  With respect,
  Kali.
  OSSi.

• Error when calling bean 'delivery': waiting for reply has expired.

  Hello
  
  I run a process that currently catches an exception since a partnerlink. When the exception is caught, I send an email and the process stops. When I submit an application since the BPEL console, I have to wait the JTA timeout before the return of the page. However, the instance goes smoothly and I got the email before the time-out occurs. That's what I see in the newspapers. When I look at the audit workflow and activity, all activities were time-stamped before throwing exception. Has anyone seen this problem or knows what is happening. Is there a problem of in a catch block or catch-all mail?
  
  < 2009-04-19 22:33:41, 859 > < ERROR > < iCareTest.collaxa.cube > < BaseCubeSessionBean::logError > error when the bean 'delivery': waiting for reply has expired. The conversation id is cf9324c9be114336:513ede58:120c17e1922:-7 fc 0. Please check the detail process instance.
  com.oracle.bpel.client.delivery.ReceiveTimeOutException: waiting for reply has expired. The conversation id is cf9324c9be114336:513ede58:120c17e1922:-7 fc 0. Please check the detail process instance.
  
  Thanks in advance
  
  Jim

  There is no question why it happens to expire is because you don't have a response to the client in your tote.

  If you look at your processes, you will see that the default response is in the main field of application. When the Tote is called this response is in the past, that's why no reply is sent.

  Please answer in your catch all back to the client and it will work.

  see you soon
  James

• Error when calling a procedure using an external table with c#.

  Hello

  I'm developing an application scheduler with Visual Studio 2010 (c#) to start my PL/SQL procedures.

  Everything works fine with each procedure, but one who reads the contents of an external table.

  Strange thing is when I start the same procedure with Toad, I have no problem, but when I run with my c# code:

  OracleCommand cmdMET = new OracleCommand();

  cmdMET.CommandText = 'STG_AE. M_MET_S_EXT_DEFECT ';

  cmdMET.CommandType = CommandType.StoredProcedure;

  con = cmdMET.Connection;

  OracleParameter retvalMET = new OracleParameter ("value", OracleDbType.Varchar2, 50);

  retvalMET.Direction = ParameterDirection.ReturnValue;

  cmdMET.Parameters.Add (retvalMET);

  cmdMET.ExecuteNonQuery ();

  I got this error:

  ORA-29913: error in executing ODCIEXTTABLEFETCH legend

  ORA-01722: invalid number

  ORA-06512: at "STG_AE. M_MET_S_EXT_DEFECT', line 8

  ORA-06512: at "STG_AE. MET_SRC', line 10

  ORA-06512: at "STG_AE. PUTS", line 14

  ORA-06512: at line 1

  I can't understand why it works when I run it with Toad and why I get this error when launching of it with c#... Any advice would be great!

  Thank you!

  I can't understand why it works when I run it with Toad and why I get this error when launching of it with c#... Any advice would be great!

  The error led to think that a string to number conversion fails all by accessing the external table.

  What is the format of numeric fields in the external file?

  I'm guessing that your session NLS_NUMERIC_CHARACTERS setting is defined differently whether you're in your application c# or toad.

  Could check you on both?

• Thread: Error when calling a database adapter

  I got the following error when I invoke a task in the service process that contains the data adapter.
  
  LIAISON. JCA-12511
  JCA Binding Component connection problem.
  JCA Binding component is unable to create an outgoing connection of JCA (CCI).
  SaveMessageProject:LocalDB [LocalDB_ptt::insert (MessagesCollection)]: The JCA Binding component could not establish an outbound connection of JCA CCI due to the following problem: BINDING. JCA-12510
  Location of JCA resource adapter error.
  Cannot find the adapter in JCA resources via the element of the binding .jca file <-factory connections / >
  The Binding of JCA component is unable to startup of the resource adapter that is specified in the <-factory connections / > element: location = ' EI/DB/localDB.
  The reason is most likely to be
  (1) the resource adapter RAR file has not been deployed successfully to the WebLogic application server or
  (2) the "< jndi name >" element in weblogic - ra.xml has not been defined in eis/DB/localDB. In the latter case, you need to add a new factory of connections from WebLogic JCA (deploy a RAR).
  Please fix this and then restart the application server
  
  Please ensure that the JCA connection factory and dependent connection factories have been set up with a sufficient limit for maximum connections Please also make sure that the physical connection to the EIS server is available and the backend itself accepts connections.
  
  I miss nothing need to do on the weblogic?
  The steps I did to deploy are simply click on the service to deploy on Jdeveloper and following the wizard to deploy on the weblogic application server.
  
  Please help, I am so depressed on this subject.

  I guess that's #2, which means that you must create a Weblogic JDBC data source and also a connection pool. There are instructions to act quickly in the doc of installation Instructions here:

  http://www.Oracle.com/technetwork/middleware/soasuite/BPM-11g-sales-quote-demo-Setup-and--131283.zip

  Hope that helps you out of your depression :-)

• I get this error when I turn on the PC, DLL C:\windows\igpitrac.dll, how do I fix?

  I click OK and then I get a second pop saying window

  Rundll32.exe - bad Image

  It tells me to check it against my installation disc, but when I tried the installation disc tells me that my version newer than the disc.

  How can I get this file corrected?

  It is sometimes easy to get rid of the error message by doing something like disable the startup item in msconfig (if you can still find), but I suggest you fix the problem and difficulty not only the symptom of the problem by simply deleting the startup message.
  I would also not recommend you start digging in the registry to try to find the startup item and remove it unless you have a backup of your system or at least a backup of your registry, because there is no 'Cancel' or 'quit without saving changes' option in regedit.  If you make a mistake, that's all.
  These ideas relieve 'rapid' and sometimes risky of the symptom if they not even work at all, but they can't actually solve the problem.  Also, I'd be suspicious of ideas that begin with the words "try."  You don't need to try things, you need to fix things.  You don't need to try ideas that might work, you must do something that will always work all the time.
  Here are the detailed instructions that protect you and solve your problem in the 'right' way.
  There is very little. DLL files that should be loaded from the C:\WINDOWS folder and is not one of them.
  Describe your current antivirus and software anti malware situation: McAfee, Norton, Spybot, AVG, Avira
  !, Defender, ZoneAlarm, PC Tools, MSE, Comodo, etc..
  A "Cannot find...". ', ' Failed to start..., "Could not load..." ». "Might not work... "" Cannot run ""error loading... ". "or"specific module could not be found"message at startup is usually related to the malware that has been configured to run at startup, but the referenced file has been removed after a malware scan, leaving behind him a startup item or the registry entry pointing to a file that does not exist.
  It might be a removal of malicious software or an application not installed.  The entry may have a curious looking name since it was probably generated at random when the malware was installed. If you search your system for the referenced file, you may not find.
  Windows attempts to load this file but cannot locate because the file has been deleted for most probably during an analysis of the malware. However, an orphaned associate of remainders of startup parameter or registry entry and tells Windows to load the file when you start or connection.
  So you should delete the referenced entry Windows stop trying to load or run the file. It may or may not be included in the registry, but you can still find it.  Autoruns (see below) you get the elements no matter where it is.
  If you just locate and uncheck the item in msconfig, which disables the element but does not remove the reference to the element of false starting your computer.   The msconfig program is not a Startup Manager, that's a troubleshooting tool.  Disabling things in msconfig to put an end to the messages and think that your problem is solved is short-sighted and leave behind him a sloppy XP configuration.  Just disable the display of a start-up error message should not count as a 'solution' to the problem.
  If you are comfortable editing the registry, you can find and remove the reference directly from there or remove it using a popular third-party tool called Autoruns.  The problem can always be found in the registry well.
  Before making any changes to your registry by hand or with third-party tools, don't forget to first make a backup of the registry. There is no cancellation or exit without saving the option in regedit.
  Here is a link to a popular registry backup tool:
  http://www.SnapFiles.com/get/ERUNT.html
  You can use Autoruns to find the element of start remains little matter where he's hiding.  Autoruns does not install anything on your computer.  It will display all startup locations where the reference may be then you can turn it off or remove it completely.  Here is the download link for Autoruns:
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Run Autoruns.exe and wait that he at the end of the filling of the list of entries.
  When the Autoruns is finished scanning your system, it will say "Ready" in the lower left corner.  Autoruns can be a little intimidating to first if you have never seen it before because it displays a lot of information.  You are really interested only a few sections.
  The problem is usually to start the system or the user startup entries, then click the connection tab and see if the startup item is there.
  Scroll through the list and look for a boot entry associated files in the error message.
  If you can't find on the connection tab, look in any tab.
  You can also click file, search to search for logon, or any tab for all or part of the name of the element.
  Right-click on the offending entry and choose Remove
  .  If you are not sure what it is, you can simply disable, restart and if the problem is resolved and then remove the offending entry.  If you don't see it in Autoruns, you may edit the registry and remove the item from your startup folder it.  Autoruns shall display the same information however.
  Given that systems currently has or has had an infection, follow up with this:
  Perform scans for malware, and then fix any problems:
  Download, install, update and do a full scan with these free malware detection programs:
  Malwarebytes (MMFA): http://malwarebytes.org/
  SUPERAntiSpyware: (SAS): http://www.superantispyware.com/
  They can be uninstalled later if you wish.
  Restart your computer and solve the outstanding issues.

  Do, or do not. There is no test.

  I decided to implement the points for a new puppy instead of a pony!

• Error when calling sous-modèle with the table for the invoice

  I have an invoice template setup and I need to call different tables based on which company they are run for. Calling the separate from the headers and footers of model sub works fine but when I try to use the approach of template void for the body of the invoice I get an error of caused by: oracle.xdo.parser.v2.XMLParseException: element 'when' not found in ' xsl: choose '.
  
  During the validation of the model sub I get error of * [031111_102337143] [] [ERROR] [line 427.180] illegal closure context XSL table: xsl: choose *.
  
  I think I have to use a different model for the body because a given business xml is one completely different structure than the others, but also the structure of the table.
  
  
  Any help would be greatly appreciated as this is the critical moment
  
  Thank you

  I sent you the modified model. Take a peek inside.

  Thank you
  BIPuser

• Error when calling model sup in the XML editor

  Hi friends,
  For the part of the header of my report, I create a template void and I try to call it.
  I called the sub model by using the following commands: -.
  <? call@inlines:header? >
  <? end call? >
  Then in the body, I'm importing this file using the <? import:file:///C:\sreekanth\Header.RTF? >
  When I run the report I get the following error
  Due to: java.io.FileNotFoundException: /C:\sreekanth\Header.rtf (no such file or directory)
  Please help me.
  I can't find the reason for the error.
  But when I run it on the spot, it works fine.
  Is no problem when I create the submodel? What are the steps to create a sub termplate?

  Hello

  the BI Publisher Forum may be a better place for you to get a response than the reports Forum.

  Concerning
  Rainer

• Return simultaneous errors when called more then once in a workflow

  Hello

  When I call the OKCREPMA workflow, I have a business need to run the kernel OKC_REP_CON_APPR_ATTACH simultaneous more than once, the first time he's going very well, but when I call it once again in the same workflow, it throws the following exception:

  oracle.apps.fnd.framework.OAException: Application: DNF, Message name: FND_GENERIC_MESSAGE. Chips: MESSAGE = java.sql.SQLException: ORA-20001: SQL_PLSQL_ERROR: N, ROUTINE, MO_GLOBAL. INIT, N, ERRNO,-20001, N, REASON, ORA-20001: SQL_PLSQL_ERROR: N, ROUTINE, MO_GLOBAL. SET_ORG_ACCESS, N, ERRNO,-20001, N, REASON, ORA-20001: APP-FND-02938: Falha na multiorganizacoes ao iniciar uma sessao soum para o produto: & PRODUCT. Informed seu suporte representative.

  ORA-06512: em 'APPS. FND_MESSAGE', line 509

  ORA-06512: em 'APPS. MO_GLOBAL', line 36

  ORA-06512: em 'APPS. MO_GLOBAL', line 757

  ORA-06512: em 'APPS. MO_GLOBAL', line 700

  ORA-06512: em line 1;

  Anyone have any hint on how to solve this problem?

  Kind regards

  Adelmo

  1. go in the liability: System Administrator

  2. go to profile > system.

  3 ask MO: the safety profile and MB: operational unit, set the value of the level of responsibility

  4. test the issue again.

  Please close the thread by marking as replied with correct/good, if its response.

• Error when calling a method AM of Bean managed

  Hi friends,

  JDev's Studio Edition Version 11.1.2.4.0

  I have a page (HomePG) that has a read-only table. Select a field in the table and you enter a value for the inputText and then clicking on a button, the selected employee's salary should be replaced by the value entered in the inputText field.

  I am trying to call a method of the managed bean AM and I get an error while doing this. I created a link to the method in the page where the call is made.

  Here is the code of the AOS

  ' Public Sub hikeSelectedRow (Key key, BigDecimal val) {}

  ViewObjectImpl emp = getEMPVO1();

  RowSetIterator empVO = emp.createRowSetIterator ("Test");

  System.out.println ("in selected Update");

  System.out.println ("in selected, Update key:" + key);

  Row [] selectedEmpArr;

  selectedEmpArr = empVO.findByKey (key, 1); -> Error comes here

  System.out.println ("in selected, Update key:" + key.toString ());

  EMPVORowImpl selectedEmp = (EMPVORowImpl) selectedEmpArr [0];

  selectedEmp.setSal (selectedEmp.getSal () .add (val));

  System.out.println ("added, made Bravo");

  getTransaction () .commit ();

  }

  The line is selected in the Managed bean and is also selected. However during appraisal findByKey get the performance I get the below error. Can someone please.

  The error I get is

  < ActionListenerImpl > < processAction > java.lang.NumberFormatException: for input string: "[oracle.jbo.Key [7566]].

  javax.faces.el.EvaluationException: java.lang.NumberFormatException: for input string: "[oracle.jbo.Key [7566]].

  at org.apache.myfaces.trinidad.component.MethodExpressionMethodBinding.invoke(MethodExpressionMethodBinding.java:51)

  at com.sun.faces.application.ActionListenerImpl.processAction(ActionListenerImpl.java:102)

  at org.apache.myfaces.trinidad.component.UIXCommand.broadcast(UIXCommand.java:190)

  to oracle.adf.view.rich.component.fragment.ContextSwitchingComponent$ 1.run(ContextSwitchingComponent.java:130)

  at oracle.adf.view.rich.component.fragment.ContextSwitchingComponent._processPhase(ContextSwitchingComponent.java:461)

  at oracle.adf.view.rich.component.fragment.ContextSwitchingComponent.broadcast(ContextSwitchingComponent.java:134)

  at oracle.adf.view.rich.component.fragment.UIXInclude.broadcast(UIXInclude.java:112)

  to oracle.adf.view.rich.component.fragment.ContextSwitchingComponent$ 1.run(ContextSwitchingComponent.java:130)

  at oracle.adf.view.rich.component.fragment.ContextSwitchingComponent._processPhase(ContextSwitchingComponent.java:461)

  at oracle.adf.view.rich.component.fragment.ContextSwitchingComponent.broadcast(ContextSwitchingComponent.java:134)

  KeyVal key = new key (new Object() {Integer.parseInt (((List) tableIterator.next ()) m:System.NET.SocketAddress.ToString ())});

  So, what will return: (tableIterator.next ()) m:System.NET.SocketAddress.ToString () (list)?

  I suppose this relates a strange string?

  Check out this blog for a correct use of the RowKeySet (and is also described in a easier way to get the current line in the case of single selection): ADF:TABLE - Get selected or lines. John Brunswick

  Dario

• Error when calling stored procedure of backing bean

  I use Jdeveloper 11.1.1.6 and tries to use the following URL to execute a SP of a bean of support: http://ramannanda.blogspot.com/2011/11/optimized-update-insert-adf.html
  
  The reason why I'm interested in this is currently I coded my support bean to perform insertions and deletions by the use of my objects in view. I am the scene up to a combined 5-10 K, insertions and deletions and performance is rather slow. If there is a way to adjust the display objects as well as the validation is much faster, it is the preferred method. If this cannot be done then I would understand the approach identified in the URL.
  
  I've highlighted a section of code below fails when you use the approach of the URL. It-error with the following exception: javax.el.ELException: oracle.jbo.JboException: java.sql.SQLException: internal error: incompatible catalog view
  
  
  You have thoughts about what could cause this exception.
  
  
  
  
  
  create or replace
  TYP_TEST_R type is object
  (
  Test_Id Number (5.0).
  Test_Num Number (7.0)
  );
  
  
  create or replace
  type TYP_TEST_TB as the TYP_TEST_R table;
  
  
  
  {} private void myMethod (MyTableVORowImpl pCurrentRow)
  int i = 0;
  DCIteratorBinding = lDciter
  (DCIteratorBinding) getBindings () .get ("MyTable1Iterator");
  MyAppModuleAMImpl = lMyAppModuleAMImpl
  (MyAppModuleAMImpl) lDciter.getViewObject () .getApplicationModule ();
  Connection = lConnection
  lMyAppModuleAMImpl.getDBTransaction () .createStatement (1) .getConnection ();
  StructDescriptor lTblRecordStructType =
  StructDescriptor.createDescriptor ("DBADMIN. TYP_TEST_R,"
  lConnection);
  
  ... < additional logic here >...
  
  
  Object [] lArray = Object [lSortedDifferences.size (new)];
  all in (...) {
  Number lNumber =...
  Number of lDifferentStore = (Number) lDifferentIterator.next ();
  
  
  STRUCT lTempStruct =+ _
  new STRUCT (lTblRecordStructType, lConnection,+ _)
  * new Object() {pCurrentRow.getTestId (), * + _}
  ({ lDifferentStore}) ; +_
  lArray [i] = lTempStruct;
  i = i + 1;
  }
  
  create table structure descriptor
  ArrayDescriptor = lTableDesc
  ArrayDescriptor.createDescriptor ("DBADMIN. TYP_TEST_TB,"
  lConnection);
  create a type of table with the structure definition
  LTableArray = ARRAY
  New ARRAY (lTableDesc, lConnection, lArray);
  String lCallableProcedureStatement =
  "start DBADMIN. SP_TEST(?,?); end; « ;
  OracleCallableStatement lOracleCallableStatement = null;
  lOracleCallableStatement =
  (OracleCallableStatement) lMyAppModuleAMImpl.getDBTransaction (.createCallableStatement (lCallableProcedureStatement),
  (0);
  lOracleCallableStatement.setARRAY (1, lTableArray);
  lOracleCallableStatement.setString (2,
  (String) ADFUtil.evaluateEL("#{sessionScope['UserName']}"));
  lOracleCallableStatement.executeUpdate ();
  }

  Hello

  the user that executes the statement has the correct grant to the user-defined type?

  concerning
  Peter

• component Java - ora-01013 error when calling ws.createResultSetSQL

  Performance of Content Server 11.1.1.5 on WLS 10.3.5 in 64-bit Linux environment. Same component/code runs in the dev environment, but still get this error in production. In production, the query executes against display in the same schema as the system database. I can run the same query in SQL Developer or SQLPlus and the return of almost immediate results - about 1 second.
  
  The query in the Java component expires almost everytime, even if very little load on the system (late at night).
  
  getMessage() returns «!» csDbUnableToCreateResultSet
  
  I already have the default query time-out in config.cfg to 120 seconds.
  
  
  Any suggestions? Really stumped on this one!
  
  Thank you, Ken
  
  
  Here is an example of the Java code used in the call.
  
  {code} package com.example;
  Import intradoc.common.ExecutionContext;
  Import intradoc.common.ServiceException;
  Import intradoc.common.SystemUtils;
  Import intradoc.data.DataBinder;
  Import intradoc.data.DataException;
  Import intradoc.data.DataResultSet;
  Import intradoc.data.ResultSet;
  Import intradoc.data.Workspace;
  Import intradoc.provider.Provider;
  Import intradoc.provider.Providers;
  Import intradoc.shared.FilterImplementor;
  Import intradoc.util.IdcMessage;
  
  public class Test implements {FilterImplementor}
  public int doFilter (workspace ws, linking DataBinder, ExecutionContext cxt) survey DataException, ServiceException {}
  String value = "-1";
  String xEMP_NUM ="";
  String SQL = "";
  String ResultSetName = "XEMPNUMCOUNT";
  int rowcount = 0;
  Result DataResultSet = null;
  DataException error = null;
  ResultSet temp = null;
  WsTemp workspace = null;
  SystemUtils.trace ("filterdebug", "Start doFilter to Test");
  xEMP_NUM = binder.getLocal ("xEMP_NUM");
  xEMP_NUM = (xEMP_NUM == null)? NULL: xEMP_NUM.trim ();
  SystemUtils.trace ("filterdebug", "xEMP_NUM =" + xEMP_NUM);
  If (xEMP_NUM! = null & &! xEMP_NUM.equalsIgnoreCase("0") & & xEMP_NUM.length () > 0) {}
  SQL = "select emp_num, emp_mname, emp_lname and emp_fname from MSE where emp_num ="+ xEMP_NUM.trim (); ".
  SystemUtils.trace ("filterdebug", "SQL =" + SQL);
  If (ws == null) {}
  SystemUtils.trace ("filterdebug", "ws is null, getting ws of appeal to getSystemWorkspace()");
  WS = getSystemWorkspace();
  }
  SystemUtils.trace ("filterdebug", "try-catch block to get SQL ResultSet");
  try {}
  SystemUtils.trace ("filterdebug", "start: temp = ws.createResultSetSQL (SQL)");
  Temp = ws.createResultSetSQL (SQL);
  SystemUtils.trace ("filterdebug", "end: temp = ws.createResultSetSQL (SQL)");
  result = new DataResultSet();
  result. Copy (temp);
  RowCount = result.getNumRows ();
  SystemUtils.trace ("filterdebug", "number of lines =" + rowcount);
  } {} catch (DataException of)
  error = from;
  SystemUtils.trace ("filterdebug", "de.getMessage () =" + de.getMessage ());
  } {Finally
  ws.releaseConnection ();
  }
  If (rowcount > 0) {}
  try {}
  int fieldCnt = result.getNumFields ();
  SystemUtils.trace ("filterdebug", "fieldCnt =" + fieldCnt);
  result. First();
  xEMP_NUM = result.getStringValue (0);
  binder.putLocal ("xEMP_NUM", xEMP_NUM);
  String xEMP_LNAME = result.getStringValue (1);
  binder.putLocal ("xEMP_LNAME", xEMP_LNAME);
  String xEMP_MNAME = result.getStringValue (2);
  binder.putLocal ("xEMP_MNAME", xEMP_MNAME);
  String xEMP_FNAME = result.getStringValue (3);
  binder.putLocal ("xEMP_FNAME", xEMP_FNAME);
  } catch (NumberFormatException nfe) {}
  SystemUtils.trace ("filterdebug", "nfe.getMessage () =" + nfe.getMessage ());
  }
  } else {}
  SystemUtils.trace ("filterdebug", "error to throw because xEMP_NUM is not in the table of the ems");
  throw new ServiceException ("provided Invalid number!");
  }
  If (error! = null) {}
  SystemUtils.trace ("filterdebug", "Error lay like error condition exist.");
  throw error;
  }
  }
  SystemUtils.trace ("filterdebug", "End doFilter for Temp");
  Back to CONTINUE;
  }
  
  public getSystemWorkspace() {} Workspace
  Workspace workspace = null;
  WsProvider provider = Providers.getProvider ("SystemDatabase");
  If (wsProvider! = null) {}
  workspace (Workspace) = wsProvider.getProvider ();
  }
  Returns the workspace;
  }
  }
  {code}

  Hello

  ORA-01013: user has requested the cancellation of the current operation

  This is the basic error being returned in the newspapers of the Complutense University of MADRID, which is originally that the result settled the question.

  Can you check to see if the connection DB at UCM is losing.

  Perhaps a way to check this would restart DB completely which will clear the dead / suspended the process on the side of the db and then try to run the same query to see what is happening.

  Thank you
  Srinath