Error when the WSDL file

Similar Questions

• Error when importing WSDL file created in JDeveloper inside BS

  Hi all
  
  I am faced error when importing WSDL service DBAdapter created using JDeveloper inside my business service at the OSB.
  The error in OSB is "the mapped resource does not exist.

  What version of OSB are you using? Please download the schema (.xsd) files as well. WSDL has references to this pattern, but they are not downloaded from where this error. On sbconsole, if you click on a WSDL name to see a button comes with the name of "references Edit." Click on which points to the xsd, you downloaded.

  Kind regards
  Anuj

• AnyConnect Cert warning error when the xml file is changed.

  Hello world

  We have valid CA cert and it is installed successfully on the ASA ASA associate outside the interface.

  When you use ipsec IKeV2 with any connection pre deployment anyconnect when I change the anyconnect on ASA and user profile

  connects the first time, he gets the warning below

  Untrusted security VPN server certificate warning

  The options are

  Connect anyway cancel connection

  I click on connect anyway and anyconnect is connected.

  Checked that CN has the FQDN value.

  We do not use SSL certificate.

  When I connect the second time above cert error warning do not come.

  This warning cert error only comes when the changes are made to the anyconnect profile and the user connects again to the AAS.

  We do not use cert based authentic.

  Any ideas how I can fix this problem?

  Concerning

  MAhesh

  You can remove and reinstall the certificate authority. It will require that first delete you the configured services dependent thereon, binding to the interface etc..

  I am not convinced that would fix what you see, and it would not be my first choice.

  First, I would check things like why don't not the client approves the certificate (audit for example simply by accessing the interface of the ASA and see what your browser indicates that the question (both Firefox and Chrome are very useful in telling you of any problem with the certificate if you expand the details), what is the content of the profile and changes) the etc.

  You can open a TAC case?

• Get the error when the wsdl

  Hello
  
  I installed WCC 11.1.1.6. I downloaded the WSDL content WebCenter for CheckIn. While hitting the WSDL by SOAPUi, I get the error "the request requires user authentication. It MUST contain a header field WWW-Authenticate (section 14.46) containing a fault that is applicable to the requested resource. The client MAY repeat the request with a suitable authorization (section 14.8) header field. If the application already includes identification of the authorization information, then the 401 response indicates that authorization was refused for those credentials. If the 401 response contains the same challenge as the previous answer, and that user agent has already attempted at least once authentication, then the user SHOULD be presented the entity that was given in the response, since that entity MAY include diagnostic information relevant. HTTP access authentication is explained in article 11 ".
  
  Any help is appreciated.
  
  Thank you.

  Hello

  Open SOAP UI - projects - - name of WSDL - demand.

  Highlight and select request - down left - ask properties see - here, username / password will be displayed.

  I hope this helps.

  Thank you
  Srinath

• Download this message when I try to run Lightroom. Point procedure entry AgTransitCargo_pushTransitCargo could not be found in the AgKernel.dll dynamic link library - system: windows 7 64 bit is no error in the log file

  Download this message when I try to run Lightroom. The procedure entry point AgTransitCargo_pushTransitCargo could not be found in the AgKernel.dll dynamic link library

  system: windows 7 64-bit

  There is no error in the log file.

  no error in scannow at the command prompt.

  

  Hi Michela,

  Lightroom makes a call the the AGkernel.dll file, but the file isn't sure what to do because it can't find the line of code within himself to answer. This can happen for several reasons, that fall within these two broad categories: AGkernel.dll is damaged and must be repaired or AGKernel.dll version is incorrect and should be updated to the correct version.

  Here are some things you can do to fix the file:

  -Record again with Windows AGKernel.dll: https://support.microsoft.com/en-us/kb/249873

  -Windows repair: https://support.microsoft.com/en-us/kb/929833

  -Install all the updates that are available for Windows: Windows Installer updates

  -Uninstall and reinstall Lightroom

  Kind regards

  Tanuj

• The WSDL URL is not valid or the WSDL file is not valid or incorrect @ WebLogic Server

  Hello

  Hello everyone... I am facing a problem regarding the application of BPEL process in Weblogic server and its details are given below

  I was sent a BPEL process in Weblogic Server and previously it was working very well according to our goal.

  But today when I clicked on particular SOA as soa-infra in Weblogic Enterprise Manager and press TEST tab to copy the 'end' for this SOA url I got this below error mentioned that this error is also coming up for all SOA processes.

  Error: -.

  The WSDL URL is not valid or the WSDL file is not valid or incorrect. -java.io.IOException:WSDLException: faultCode = OTHER_ERROR: cannot play the WSDL

  According to http://xyz.com:7001/soa-infra/services/default/FASoaWPv1.3/fa_proc_client_ep?XSD=xsd/schedule.xsd:WSDL not found not found

  
  

  Thanx in advance and please help me to solve it.

  
  

  With respect,

  
  

  Manas Mazumder

  Kolkata (India)
  

  
  

  Hello

  Hello everyone... I encountered a problem regarding the application of BPEL process and its details are given below

  I was sent a BPEL process in Weblogic Server and previously it was working very well according to our goal.

  But today when I clicked on particular SOA as soa-infra in Weblogic Enterprise Manager and press TEST tab to copy the 'end' for this SOA url I got this below error mentioned that this error is also coming up for all SOA processes.

  Error: -.

  The WSDL URL is not valid or the WSDL file is not valid or incorrect. -java.io.IOException:WSDLException: faultCode = OTHER_ERROR: cannot play the WSDL

  According to http://xyz.com:7001/soa-infra/services/default/FASoaWPv1.3/fa_proc_client_ep?XSD=xsd/schedule.xsd:WSDL not found not found

  Hello

  Hello everyone... I encountered a problem regarding the application of BPEL process and its details are given below

  I was sent a BPEL process in Weblogic Server and previously it was working very well according to our goal.

  But today when I clicked on particular SOA as soa-infra in Weblogic Enterprise Manager and press TEST tab to copy the 'end' for this SOA url I got this below error mentioned that this error is also coming up for all SOA processes.

  Error: -.

  The WSDL URL is not valid or the WSDL file is not valid or incorrect. -java.io.IOException:WSDLException: faultCode = OTHER_ERROR: cannot play the WSDL

  According to http://xyz.com:7001/soa-infra/services/default/FASoaWPv1.3/fa_proc_client_ep?XSD=xsd/schedule.xsd:WSDL not found not found

  Hello

  Hello everyone... I encountered a problem regarding the application of BPEL process and its details are given below

  I was sent a BPEL process in Weblogic Server and previously it was working very well according to our goal.

  But today when I clicked on particular SOA as soa-infra in Weblogic Enterprise Manager and press TEST tab to copy the 'end' for this SOA url I got this below error mentioned that this error is also coming up for all SOA processes.

  Error: -.

  The WSDL URL is not valid or the WSDL file is not valid or incorrect. -java.io.IOException:WSDLException: faultCode = OTHER_ERROR: cannot play the WSDL

  http://xyz.com:7001/soa-infra/services/default/FASoaWPv1.3/fa_proc_client_ep?XSD=xsd/schedule.xsd:WSDL notfound found

  xddsdsdlslkldsfdsfn dsnkjWith

  Hi Manas,

  Try your composite, cleaning of the MDS (under the deployed applications) cancel the deployment and redeployment.

  Antonis

• Error creating the WSDL web service in 11.1.2.0.0

  Hello
  
  I just install JDeveloper 11.1.2.0.0. I tried to test a web service created (and tested successfully) in 11.1.1.5.0. The service is deployed on WebLogic Server internal but when I call 'Test Web Service' is the error I get:
  
  The tester of Web services can be invoked, because the WSDL for the service selected document cannot be read.
  
  java.lang.IllegalStateException: SSLContextImpl is not initialized.
  at com.sun.net.ssl.internal.ssl.SSLContextImpl.engineGetSocketFactory(SSLContextImpl.java:145)
  at javax.net.ssl.SSLContext.getSocketFactory(SSLContext.java:260)
  at oracle.jdevimpl.credential.LazySSLContextSpi.engineGetSocketFactory(LazySSLContextSpi.java:67)
  at javax.net.ssl.SSLContext.getSocketFactory(SSLContext.java:260)
  at oracle.jdeveloper.webservices.wsdl.CachedWSDLReader.getNewReaderInstance(CachedWSDLReader.java:398)
  to oracle.jdeveloper.webservices.wsdl.CachedWSDLReader$ 1.initialValue(CachedWSDLReader.java:298)
  to oracle.jdeveloper.webservices.wsdl.CachedWSDLReader$ 1.initialValue(CachedWSDLReader.java:294)
  at java.lang.ThreadLocal.setInitialValue(ThreadLocal.java:141)
  at java.lang.ThreadLocal.get(ThreadLocal.java:131)
  at oracle.jdeveloper.webservices.wsdl.CachedWSDLReader.getReaderImpl(CachedWSDLReader.java:308)
  at oracle.jdeveloper.webservices.wsdl.CachedWSDLReader.readWSDLInternal(CachedWSDLReader.java:531)
  at oracle.jdeveloper.webservices.wsdl.CachedWSDLReader.readWSDLDirect(CachedWSDLReader.java:471)
  to oracle.jdevimpl.webservices.tcpmonitor.ServiceTester$ 3.run(ServiceTester.java:262)
  at java.lang.Thread.run(Thread.java:662)
  
  Then I tried to create a new project and the web service in Java from WSDL, but on the second step of the wizard 'Java Web Service WSDL' when I select the WSDL file in the drive and click on 'Next' I get
  
  java.lang.IllegalStateException: SSLContextImpl is not initialized.
  
  java.lang.IllegalStateException: SSLContextImpl is not initialized.
  at com.sun.net.ssl.internal.ssl.SSLContextImpl.engineGetSocketFactory(SSLContextImpl.java:145)
  at javax.net.ssl.SSLContext.getSocketFactory(SSLContext.java:260)
  at oracle.jdevimpl.credential.LazySSLContextSpi.engineGetSocketFactory(LazySSLContextSpi.java:67)
  at javax.net.ssl.SSLContext.getSocketFactory(SSLContext.java:260)
  at oracle.jdeveloper.webservices.wsdl.CachedWSDLReader.getNewReaderInstance(CachedWSDLReader.java:398)
  to oracle.jdeveloper.webservices.wsdl.CachedWSDLReader$ 1.initialValue(CachedWSDLReader.java:298)
  to oracle.jdeveloper.webservices.wsdl.CachedWSDLReader$ 1.initialValue(CachedWSDLReader.java:294)
  at java.lang.ThreadLocal.setInitialValue(ThreadLocal.java:141)
  at java.lang.ThreadLocal.get(ThreadLocal.java:131)
  at oracle.jdeveloper.webservices.wsdl.CachedWSDLReader.getReaderImpl(CachedWSDLReader.java:308)
  at oracle.jdeveloper.webservices.wsdl.CachedWSDLReader.readWSDLInternal(CachedWSDLReader.java:531)
  at oracle.jdeveloper.webservices.wsdl.CachedWSDLReader.readWSDL(CachedWSDLReader.java:484)
  at oracle.jdeveloper.webservices.wsdl.CachedWSDLReader.readWSDL(CachedWSDLReader.java:455)
  at oracle.jdevimpl.webservices.wizard.jaxrpc.common.SpecifyWsdlPanel.fetchWSDL(SpecifyWsdlPanel.java:1050)
  to oracle.jdevimpl.webservices.wizard.jaxrpc.common.SpecifyWsdlPanel$ 1.run(SpecifyWsdlPanel.java:364)
  at oracle.ide.dialogs.ProgressBar.run(ProgressBar.java:655)
  at java.lang.Thread.run(Thread.java:662)
  
  I did the new facility of this new version of JDeveloper in New Middleware House with all the default options and it's the first thing I tried.
  
  Any tips?
  
  Thank you
  Bruno

  Bruno,

  You can try the following to me?

  1. Tools-> preferences
  2. the powers-> HTTPS Credential

  Ideally take me a screenshot here.

  3. press the button "default".

  Then restart your tool. It is for me as we take hold of your https from a previous version settings.

  Sorry for the oversight,

  Gerard

  (The developer of the HTTP parser)

• Error 1335 the Cabinet file

  Hello

  When I install Microsoft Flight Simulator X, I get the error message 1603. But before I got this messase that I get an Error 1335 the Cabinet File "D1 ~ 10.CAB '.

  I copied all files from drive 1 and 2 on my hard drive and I still get the same message.

  Help, please

  Hello

  Cabinet (or CAB) is a file format to archive for Microsoft Windows that supports compression without loss of data and embedded digital certificates used to maintain the integrity of the archive. CAB files have .cab file name extensions.

  Install the game in the clean boot and check if it helps.

  To help resolve the error and other messages, you can start Windows XP by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  How to configure Windows XP to start in a "clean boot" State

  Note: follow step 4 to reset the computer to start as usual after the boot process.

  Hope this information helps.

• Download error. The downloaded file has no verification. Code of error = 0x80040507__Google Chrome Installer

  Hello. I have a problem that I recently received these messages on computer blue screen comes and goes... (bsofd) when im using the internet only. Told me to stop using ie 8 and google chrome but when I tried to download it it was the message that I received... "Download error. The downloaded file has no verification. error code = 0 x 80040507 ". I have windows xp... SP3. my hardware is dual cpu, 2 GB ram, 1 TB hard drive and 512 graphics card. Please help me

  Hi Arvind,

  You try to run chkdsk on the machine and check if the problem persists.

  How to perform disk error checking in Windows XP

  Hope the helps of information. Please post back and we do know.

  Concerning
  Joel S
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Error reading the configuration file

  I install the Adobe Access 4.0 trial license server and when I run the g - r on the Tomcat installation dir \licenseserver Validator.bat I get a message "error reading configuration file. Here's the log dump:

  [] 2012-12-20 22:46:32, 176 INFO [[Partition (flashaccessserver)].com.adobe.flashaccess.server.license.context.SimpleContex tFactory] class loader of partition creation «flashaccessserver"with «[file:/c:/Tomcat6/licenseserver/flashaccessserver/libs/, file:/c:/Tomcat6/licenseserver/flashaccessserver/libs/flashaccess-license-server-ext-samp le.jar]» libraries

  [2012-12-20 22:46:32, ERROR 582 [. com.adobe.flashaccess.server.license.tools.Validator [Partition (flashaccessserver)]] could not validate the deployment tenant "flashaccessserver/sampletenant".

  com.adobe.flashaccess.server.common.configuration.ConfigurationException: error reading the configuration file

  at com.adobe.flashaccess.server.license.configuration.commonsadapter.Constants.parseTenantCo nfigurationStream(Constants.java:139)

  to com.adobe.flashaccess.server.license.configuration.commonsadapter.TenantConfigurationImpl. < init > (TenantConfigurationImpl.java:110)

  at com.adobe.flashaccess.server.license.configuration.commonsadapter.CommonsConfigurationBas edFactory.getTenantConfiguration(CommonsConfigurationBasedFactory.java:90)

  at com.adobe.flashaccess.server.license.tools.Validator.validateTenantDeployment (Validator.j ava: 255)

  to com.adobe.flashaccess.server.license.tools.Validator.validatePartitionDeployment (Validato r.java:283)

  at com.adobe.flashaccess.server.license.tools.Validator.validateGlobalDeployment (Validator.j ava: 301)

  at com.adobe.flashaccess.server.license.tools.Validator.process(Validator.java:173)

  at com.adobe.flashaccess.server.license.tools.Validator.main(Validator.java:117)

  Caused by: org.apache.commons.configuration.ConfigurationException: could not load the configuration

  at org.apache.commons.configuration.XMLConfiguration.load(XMLConfiguration.java:863)

  at org.apache.commons.configuration.XMLConfiguration.load(XMLConfiguration.java:821)

  at com.adobe.flashaccess.server.license.configuration.commonsadapter.Constants.parseTenantCo nfigurationStream(Constants.java:134)

  ... 7 more

  Caused by: org.xml.sax.SAXParseException; lineNumber: 121; columnNumber: 16; HVAC-complex - type. 2.4.b: the content of the element "KeyServer" is not over. A the "{"http://licenseserver.flashaccess.adobe.com/tenant": file"}' should. "

  at com.sun.org.apache.xerces.internal.util.ErrorHandlerWrapper.createSAXParseException (exercise wn Source)

  at com.sun.org.apache.xerces.internal.util.ErrorHandlerWrapper.error (unknown Source)

  at com.sun.org.apache.xerces.internal.impl.XMLErrorReporter.reportError (unknown Source)

  at com.sun.org.apache.xerces.internal.impl.XMLErrorReporter.reportError (unknown Source)

  at com.sun.org.apache.xerces.internal.impl.XMLErrorReporter.reportError (unknown Source)

  at com.sun.org.apache.xerces.internal.impl.xs.XMLSchemaValidator$ XSIErrorReporter.reportErro (Unknown Source)

  at com.sun.org.apache.xerces.internal.impl.xs.XMLSchemaValidator.reportSchemaError (unknown Source)

  at com.sun.org.apache.xerces.internal.impl.xs.XMLSchemaValidator.elementLocallyValidComplexT (unknown Source) type

  at com.sun.org.apache.xerces.internal.impl.xs.XMLSchemaValidator.elementLocallyValidType (KNU nown Source)

  at com.sun.org.apache.xerces.internal.impl.xs.XMLSchemaValidator.processElementContent (exercise wn Source)

  at com.sun.org.apache.xerces.internal.impl.xs.XMLSchemaValidator.handleEndElement (unknown Source)

  at com.sun.org.apache.xerces.internal.impl.xs.XMLSchemaValidator.endElement (unknown Source)

  at com.sun.org.apache.xerces.internal.impl.XMLDocumentFragmentScannerImpl.scanEndElement (KNU nown Source)

  to com.sun.org.apache.xerces.internal.impl.XMLDocumentFragmentScannerImpl$ FragmentContentDri ver.next (unknown Source)

  at com.sun.org.apache.xerces.internal.impl.XMLDocumentScannerImpl.next (unknown Source)

  at com.sun.org.apache.xerces.internal.impl.XMLNSDocumentScannerImpl.next (unknown Source)

  at com.sun.org.apache.xerces.internal.impl.XMLDocumentFragmentScannerImpl.scanDocument (exercise wn Source)

  at com.sun.org.apache.xerces.internal.parsers.XML11Configuration.parse (unknown Source)

  at com.sun.org.apache.xerces.internal.parsers.XML11Configuration.parse (unknown Source)

  at com.sun.org.apache.xerces.internal.parsers.XMLParser.parse (unknown Source)

  at com.sun.org.apache.xerces.internal.parsers.DOMParser.parse (unknown Source)

  at com.sun.org.apache.xerces.internal.jaxp.DocumentBuilderImpl.parse (unknown Source)

  at org.apache.commons.configuration.XMLConfiguration.load(XMLConfiguration.java:855)

  ... 9 more

  I use a relative path to my .pfx file to the transportServerCredential and the licenseServerCredential in the flashaccess - tenant.xml and my password was encoded using the Scrambler.bat.

  Also, when I check using the configuration http://< LicenseServer >: 8080/flashaccessserver/flashaccess/license/v2 I get the message "license server is configured properly."

  Any ideas why the Validator.bat cannot read the configuration file?

  Neil and may,

  I also used the evaluation of access version 4.0, and I got stuck in the same place you did.  I had two main symptoms.

  (1) the validator was not with the same error that you are experiencing.

  (2) later, while trying to acquire a license for playing packaged content, encrypted, the license acquisition failed, and the cause of the original error has also pointed out the Key Server parameter in flashaccess - tenant.xml.

  According to the documentation, the certificate server key (and in fact the key server itself) are supposed to will be necessary only when a policy calls for remote key service to clients of iOS.  But, I took a chance and added the .pem file in the sampletenants directory and made him the flashaccess - tenant.xml as follows:

  Configuration | Tenant | Certificates | KeyServer. File | path =

  The result was a successful validation of the configuration and the successful license acquisition and reading - and the key server is not even in the course of execution.  Apparently with 4.0 certificate is part of the minimum for the scanner configuration, even if the documentation says something quite different.

  Good luck, hope this helps.

  Scott

• Error #2136: The SWF file

  I am trying to learn how to use classes. The book I use gave me this example.

  In Vechile.as

  package {}

  import flash.display.MovieClip;

  import flash.events.Event;

  Vehicle/public class extends MovieClip {}

  public var _gasMileage:Number;

  public var _fuelAvailable:Number;

  public var _milesTraveled:Number = 0;

  public var _go:Boolean;

  public void vehicle (mpg:Number = 21, fuel: Number = 18.5) {}

  _gasMileage = mi/gal.

  _fuelAvailable = fuel;

  this.addEventListener (Event.ENTER_FRAME, onLoop, false,

  0, true);

  }

  public void onLoop (evt:Event): void {}

  If {("go-ahead")

  -_fuelAvailable;

  _milesTraveled += _gasMileage;

  If (_fuelAvailable < 1) {}

  this.removeEventListener (Event.ENTER_FRAME,

  onLoop);

  }

  trace (this, _milesTraveled, _fuelAvailable);

  This.x = _milesTraveled;

  }

  }

  public void go (): void {}

  "go-ahead" = true;

  }

  }

  }

  In the main.fla

  Framework 1

  var: = new Vehicle vehicle (21,18.5);

  addChild (vehicle);

  Vehicle.Go ();

  When I compile it gives an error output.

  Error #2136: The SWF file file:///C|/Users/Ravenwind/Documents/Main.swf contains invalid data.

  in Vehicle / frame1)

  I'm stumped

  ' I don't then assign vehicle to document class box in the property ' Do not assign the vehicle that the document class... out of the way.

  In the main file, if you don't already create one, create a movieclip symbol (just draw a shape in there at the moment).  Right click on the symbol in the library and select the link.   In the interface that appears, select the export for Actionscript option and give it the class name "Vehicle" in the field labeled 'Class'

  Make sure that you save the file Vehicle.as once you put the code in it and have this file in the same folder as your Main.fla file.

  If you do the things that I just you describe should see an instance of movieclip, which cross the scene when you run the file.

• Error when adding wsdl for components catalog

  Hello
  
  Try to add wsdl for components catalogue, but I get the following error:
  
  [Error] Instrospection exception: internal error: java.lang.NullPointerException.
  
  
  Could be problem with xsd, not sure though.

  Hi John,.

  Please check the file WSDL is correct or not in a wsdl enabled editor like eclipse, SOAP UI etc file.
  I hope that the WSDL file is not correct. In thye SOAP UI to create the simulation of the WSDL test project.

  Sidonie

• AIP-50055: error in the configuration file

  Hi all
  
  I defined a 850 doc in EDI X 12 on the Internet and I have defined an internal delivery channel to choose the file to a folder. After the deployment of the Setup, I get the error below and the file does not get picked up from this location.
  
  2009.02.05 to 05:36:46:017: B2BStarter wire: B2B - Error (ERROR) -: AIP-50055: error in the configuration file
  at oracle.tip.adapter.b2b.init.Repository.b2bEngineConfiguration(Repository.java:770)
  at oracle.tip.adapter.b2b.init.Repository.initialize(Repository.java:711)
  at oracle.tip.adapter.b2b.init.B2BServer.readRepository(B2BServer.java:451)
  at oracle.tip.adapter.b2b.init.B2BServer.initialize(B2BServer.java:183)
  at oracle.tip.adapter.b2b.init.B2BStarter.startB2B(B2BStarter.java:298)
  at oracle.tip.adapter.b2b.init.B2BStarter.run(B2BStarter.java:144)
  at java.lang.Thread.run(Thread.java:534)
  
  I even tried to make the configuration and restart the server. But still, it did not help.
  
  Please help me solve this problem.
  
  Kind regards
  Khli

  Hi khli,.

  It seems that the WalletLocation property is not available in tip.properties. Please provide it as necessary when the server starts

  Kind regards
  Dheeraj

• Understand the wsdl file to be called from partner links

  HII All,
  
  I am trying to understand the wsdl file. This file is called from a link partner. I got the part of it, but could not understand the following:
  
  < jca:operation
  LogicalDirectory = "inputTriggerDir".
  ActivationSpec = "oracle.tip.adapter.file.inbound.FileActivationSpec"
  IncludeFiles=".*\.trg".
  PollingFrequency = "10".
  MinimumAge = '0 '.
  DeleteFile = 'true '.
  OpaqueSchema = "false" >
  < / jca:operation >
  
  Would appreciate if you could please help me to understand this part of the wsdl file. I noticed that if I change the value of the LogicalDirectory parameter then the build does not deploy successfully. Somehow, it is related to the bpel.xml... Please suggest me how?
  
  Appreciate your help...
  
  Thank you
  Kind regards
  AS

  This is the operation that will be performed when a file is read.

  LogicalDirectory = this is the property that you specified to identify the polling directory. It is a best practice, if you do this, you must specify a name in the bpel.xml file. This also means you can change the directory on the fly in the BPEL console. If you right-click on the link partner receiving there is a property adds property inputTriggerDir tab and give the value of the directory on the server.

  ActivationSpec = this is just a pointer to the java code, it is set by default and cannot be changed.

  IncludesFiles = in your case, you are looking for files with the extension of .trg

  PollingFrequency = in your case 10 second interval

  MinimumAge = allows you to put a stamp, so if a file takes a long time to load you can put a wait until you get the complete file.

  DeleteFile = once read it will remove

  OpaqueSchema = if true means that you have not specified any schema and are read as binary. This is used to pass through, what you read in is what comes out the other side. Manly used for pdf and images.

  see you soon
  James

• How can I configure drive extender? get an error when the computer shuts down say reinstall Extender player

  get an error when the computer shuts down say reinstall Extender player. ? What is it. Thank you

  Hi deener49,

  Please look at the thread below for a possible solution:

  http://answers.Microsoft.com/en-us/IE/Forum/ie7_6-windows_other/please-reinstall-Extender-Player-invalid-or/86692b09-9464-E011-8dfc-68b599b31bf5