Error while executing command discoveryArrays: NetApp SnapMirror

Hello

When you set up the table managers in SRM I get the following message is displayed: "error during execution of the discoveryArrays command. I checked that the NetApp SRA installed perl scripts in the directory (C:\Program VMware Site Recovery Manager\scripts\SAN\ONTAP). At first, I thought it was a permissions problem, but I also checked that SRM admin account has local admin on the VC box as well as in VC & MRS. I use a NetApp V6080 file server and also checked the credentials of file server that I use to add a table Manager. Has anyone encountered this problem? Thanks in advance.

Environment: MRS. NetApp SRA 1.0.1 1.0.1

You must change the settings 'trusted.hosts' on the NetApp Board to include the IP address of the server that is running the adapter (that would be the Server Protection SRM) SRM

To do this, ssh or telnet on the NetApp array and run

options trusted.hosts

no doubt it is empty or does contain address of your SRM Server

Add the address with the same commands, i.e. If the address is 10.1.2.3 then

options trusted.hosts 10.1.2.3

If there is already a configured address, adds 10.1.2.3 as input separated by commas.

Rerun the discovery of the SRM and I hope that it will work.

Tags: VMware

Similar Questions

Dreamweaver CS5 error - while executing onLoad in Note_onOpen.htm, the following JavaScript e design

I'm on a Mac and cannot solve this problem. I tried searching all the .dat files in en_US and configuration but do not see when I went through the Terminal I've read that one here that would cause
While executing onLoad in Note_onOpen.htm design, the following JavaScript error occurred:
In the file "Notes_onOpen Design": onOpen is undefined

It seems that your configuration settings are corrupted. Use the documents below to re-create your user preferences.

http://helpx.Adobe.com/Dreamweaver/KB/restore-preferences-Dreamweaver-CS4-CS5.html

http://forums.Adobe.com/thread/494811

Error while executing script root.sh on the nodes at the RAC 11 g installation

Hello friends,
Here, I face an error while I run the root.sh script. During the installation of grid RAC, he asked a few dependencies of prereq. There are several .rpm files that were the prerequisites for this installation. I ignore them and I continued the installation. Now, he finally threw an error when running root.sh script. I tried to install several .rpms acquisition of information from the internet, but always this script does not work here.
Please, suggest what should I do at this point.
You guys could help me out here, how I need to go further.

Simple google search will give you missing RPM. try to install and see if that solves the problem

https://gruffdba.WordPress.com/2012/11/06/11gr2-grid-install-clscfg-bin-error-while-loading-shared-libraries-libcap-so-1-cannot-open-shared-object-file/

Don't forget, you need up-to-date existing deconfig install and run root.sh as mentioned below article

https://desaitaral.WordPress.com/2011/06/13/Oracle-Linux-6-1-and-libcap-so-1-cannot-open-shared-object/

Another article with the same question - https://taliphakanozturken.wordpress.com/2013/03/02/clscfg-bin-error-while-loading-shared-libraries-libcap-so-1-cannot-open-shared-object-file/

Error while executing a script from the command prompt
Hello, I edited the settings file and I am trying to execute an interface that links the two tables in the HR schema and load into a table in the different schema. I am able to run it in the designer, but I get an error message when I try to run through the command prompt.
Here is the error message when I try to run it
09/09/2009-11:58:42 AM (hand): session for scenario creation: DEMO_INTERFACE - 001

09/09/2009-11:58:42 AM (hand): Session: 88010 is running
com.sunopsis.core.SnpsInexistantObjectException: there is no link for this
pair logical schema/context: HR / GLOBAL
at com.sunopsis.dwg.dbobj.SnpConnect.getSnpConnectByLSchemaNameAndContex
t (SnpConnect.Java)
at com.sunopsis.dwg.dbobj.SnpConnect.getSnpConnect (SnpConnect.java)
at com.sunopsis.dwg.dbobj.SnpSession.getDwgConnectLst (SnpSession.java)
at com.sunopsis.dwg.dbobj.SnpSession.getConLst (SnpSession.java)
at com.sunopsis.dwg.cmd.DwgCommandScenario.treatCommand (DwgCommandScenar
IO. Java)
at com.sunopsis.dwg.cmd.DwgCommandBase.execute (DwgCommandBase.java)
at com.sunopsis.dwg.cmd.e.i (e.java)
at com.sunopsis.dwg.cmd.e.y (e.java)
at com.sunopsis.dwg.DwgJv.treatCmd (DwgJv.java)
at com.sunopsis.dwg.DwgJv.main (DwgJv.java)
at oracle.odi.Agent.main (Agent.java)
09/09/2009-11:58:43 AM (hand): Session: 88010 completed with return code:-1
com.sunopsis.core.SnpsInexistantObjectException: there is no link for this
pair logical schema/context: HR / GLOBAL
at com.sunopsis.dwg.dbobj.SnpConnect.getSnpConnectByLSchemaNameAndContexur
t (SnpConnect.Java)
at com.sunopsis.dwg.dbobj.SnpConnect.getSnpConnect (SnpConnect.java)
at com.sunopsis.dwg.dbobj.SnpSession.getDwgConnectLst (SnpSession.java)
at com.sunopsis.dwg.dbobj.SnpSession.getConLst (SnpSession.java)
at com.sunopsis.dwg.cmd.DwgCommandScenario.treatCommand (DwgCommandScenar
IO. Java)
at com.sunopsis.dwg.cmd.DwgCommandBase.execute (DwgCommandBase.java)
at com.sunopsis.dwg.cmd.e.i (e.java)
at com.sunopsis.dwg.cmd.e.y (e.java)
at com.sunopsis.dwg.DwgJv.treatCmd (DwgJv.java)
at com.sunopsis.dwg.DwgJv.main (DwgJv.java)
at oracle.odi.Agent.main (Agent.java)
DwgJv.main: output. Return code:-1

Thank you for your help.
Murielle
Are you sure about the configuration of odiparams.bat?

Error on executing command exportRepository.bat

Hello
I tried to export content ProfileAdapterRepository of a .jar file using the batch exportRepository command. I ran the following command-
C:\ATG\ATG10.0.3\home\bin > exportRepository.bat - profileExport.jar - r/atg/userprofiling/ProfileAdapterRepository of the file
But I get an error as follows:-
[error] atg.deployment.loader.Resources-> EDL_ARG_UNRECOGNIZED: unrecognized argument: "ufile.
What is the fix for this?

Your order seems to be containing an unwanted extra character that is the cause. This can happen if copy you and paste the command originally a UTF-8 editor or from a non-simple text source (for example a PDF or a word with command doc mentioned in a text formatting). Instead of copy - pasting, you must type the full command on the prompt or just use the raw text source and it should work fine.

Error while executing procedure

Create PROCEDURE CHECK_DAY (PDATE IN DATE, DAY_FLAG OUT VARCHAR2) IS

   h_dt date;
   t_dt date;
   C_R  VARCHAR2(1);

begin

  DAY_FLAG := 'W';

  SELECT C_R_FLAG INTO C_R FROM TIMEKEEP.HOLIDAY_MAST 
  WHERE H_DATE = PDATE AND C_R_FLAG <>'R' ;

 IF    C_R ='C' THEN
      DAY_FLAG := 'C';
 ELSIF C_R ='W' THEN
                DAY_FLAG := 'W';
 ELSE 
               T_DT := PDATE-1;

      SELECT NEXT_DAY(T_DT,'SATURDAY') INTO  H_DT FROM SYS.DUAL;

     IF (H_DT = PDATE) THEN 
          DAY_FLAG :='A';
     ELSE
          SELECT NEXT_DAY(T_DT,'SUNDAY') INTO  H_DT  FROM SYS.DUAL;

          IF (H_DT = PDATE) THEN 
               DAY_FLAG :='S';
          ELSE
               DAY_FLAG :='W';
          end if;
     end if;

 END IF;

 EXCEPTION when no_data_found then     
     T_DT := PDATE-1;
      SELECT NEXT_DAY(T_DT,'SATURDAY') INTO  H_DT FROM SYS.DUAL;

     IF (H_DT = PDATE) THEN 
          DAY_FLAG :='A';
     ELSE
          SELECT NEXT_DAY(T_DT,'SUNDAY') INTO  H_DT  FROM SYS.DUAL;

          IF (H_DT = PDATE) THEN 
               DAY_FLAG :='S';
          ELSE
               DAY_FLAG :='W';
          end if;
     end if;

end ;

-----------------------------


Create or replace PROCEDURE PREVIOUS_TWO_WORKING_DAY(pno in number,PDATE IN DATE,PRIV_DATE2 OUT DATE) IS

PRV                                     DATE;
PRV1                                   DATE;
DAY_FLAG                            VARCHAR2(1);
ATT_CNT_PRIV_DATE                      NUMBER(2);
ATT_CNT_PRIV_DATE1                       NUMBER(2);
PRIV_DATE1                           date;

BEGIN

PRV    := PDATE;

LOOP
EXIT WHEN ATT_CNT_PRIV_DATE <> 0;
PRV := PRV -1;
CHECK_DAY(PRV,DAY_FLAG);
IF DAY_FLAG = 'W' THEN
SELECT COUNT(*) INTO ATT_CNT_PRIV_DATE FROM TIMEKEEP.PRESENTI_MAST 
WHERE PERS_NO = pno AND DATE_PRE= PRV;
END IF;
END LOOP;
PRIV_DATE1 := PRV;  -- GET FIRST PREVIOUS WORKING DAY 
DAY_FLAG :='';
ATT_CNT_PRIV_DATE := 0;

PRV1      := PRIV_DATE1;

LOOP
EXIT WHEN ATT_CNT_PRIV_DATE1 <> 0;
PRV1 := PRV1 - 1;
CHECK_DAY(PRV1,DAY_FLAG);
IF DAY_FLAG = 'W' THEN
SELECT COUNT(*) INTO ATT_CNT_PRIV_DATE1 FROM TIMEKEEP.PRESENTI_MAST 
WHERE PERS_NO = pno AND DATE_PRE= PRV1;
END IF;
END LOOP;

PRIV_DATE2 := PRV1; -- GET SECOND PREVIOUS WORKING DAY

END;

---------------------------------------------------------------------

Create or Replace procedure dailylog_track is

CURSOR CHK_JOB IS SELECT PERS_NO FROM ARAI.PERSON WHERE WORK_LEFT ='W' 
and SR_JR_OTHER <> 'O';

V_PERS_NO  number(8);
V_MAXDATE  date;
PDATE        date;       
PRIV_DATE2 date;

begin

OPEN CHK_JOB;

LOOP

FETCH CHK_JOB INTO V_PERS_NO;

SELECT MAX(JOB_DATE) INTO V_MAXDATE FROM PM.DAILY_TIMESHEET
WHERE PERS_NO = V_PERS_NO;

PREVIOUS_TWO_WORKING_DAY(v_pers_no,to_date(to_char(sysdate,'dd-mon-yyyy')),PRIV_DATE2);


if V_MAXDATE < PRIV_DATE2 then

INSERT INTO arai.dailylog_person VALUES (V_PERS_NO,V_MAXDATE,to_date(to_char(sysdate,'dd-mon-yyyy')));

end if;

exit when CHK_JOB%notfound;

end loop;

close CHK_JOB;

commit;

end;

---------------------- On Execution of procedure dailylog_track  following error appeares 

SQL>  exec dailylog_track;
BEGIN dailylog_track; END;

                 *
ERROR at line 1:
ORA-01841: (full) year must be between -4713 and +9999, and not be 0
ORA-06512: at "ARAI.CHECK_DAY", line 38
ORA-01403: no data found
ORA-06512: at "ARAI.PREVIOUS_TWO_WORKING_DAY", line 32
ORA-06512: at "ARAI.DAILYLOG_TRACK", line 22
ORA-06512: at line 1

Hi all
Can someone tell me why this is happening? I tried "sysdate" with "to_date (to_char(sysdate,'dd-mon-yyyy'))" but no luck...

I use:

BANNER
----------------------------------------------------------------
Oracle Database 10g Release 10.2.0.1.0 - Production
PL/SQL Release 10.2.0.1.0 - Production
CORE 10.2.0.1.0 Production
AMT for 32-bit Windows: Version 10.2.0.1.0 - Production
NLSRTL Version 10.2.0.1.0 - Production

Thanks in advance...

Regd
Percy

Published by: PERCY2 on October 11, 2012 03:53

PERCY2 wrote:
Hi all

Finallay afte number of iterations, I got what it was... Table RECORD. PRESENTI_MAST has a date column DATE_PRE who did not consider himself in where clause. I have DATE_PRE chnged to to_Date (to_char(DATE_PRE,'dd-mon-yyyy')) & error disappeared.

Please ensure that you read the previous posts while ensuring that insert the format of date strings. Your "fix" still has a problem with it if you do not include a string of formatting to the TO_DATE function.

adpatch error: while executing patch 10218075
According to metalink solution I apply this hotfix.

source the environment file:

options adpatch = /hotpatch

Here is the error:

AutoPatch error:
Incorrect format of the file:

/U01/Oracle/vis/apps/apps_st/appl/Admin/applprod.txt

The file has the format ' % 12.0.A by applprod file format
'
and this version of AutoPatch requires the format ' % 12.0.A by applprod file format'

You must check the file
/U01/Oracle/vis/apps/apps_st/appl/Admin/vis/log/adpatch.log

to find errors.

Adpatch log file

Start of session AutoPatch *.
AutoPatch version: 12.0.0
AutoPatch started at the: Monday, June 25, 2012 08:20:02

APPL_TOP is defined on/u01/oracle/SCREWS/apps/apps_st/appl

Options = "/hotpatch."

The value of NLS_LANG environment is: American_America.AL32UTF8
NLS_LANG value for utility AD run is: AMERICAN_AMERICA. AL32UTF8

You can be notified by e-mail if an error occurs.
You want to enable this feature [no]? NO.

Please enter the batchsize [1000]: 1000

Please enter the name of the Oracle Applications system what
APPL_TOP belongs to.

Application system name must be unique on all Oracle
Applications of the systems at your site, must be between 1 and 30 characters
for a long time, can only contain alphanumeric characters and underline characters.
and must begin with a letter.

Sample application system names: 'prod', 'test', 'demo' and
"Development_2.

Name of the system of applications [SCREW]: SCREW *.

NOTE: If you do not currently have certain types of installed files
in this APPL_TOP, you may not be able to perform certain tasks.

Example 1: If you do not have the files used for installation or upgrade
the database has been installed in this area, you can install or upgrade
the database of this APPL_TOP.

Example 2: If you do not have the form files installed in this area, you can't
generate or run them from this APPL_TOP.

Example 3: If you have not installed in this area, the simultaneous program files
You cannot connect concurrent programs or generate reports of this APPL_TOP.

You currently have files used for the installation or the upgrade of the database
installed in this APPL_TOP [YES]? YES *.

You currently have HTML and Java files to HTML-based features
installed in this APPL_TOP [YES]? YES *.

You currently have files installed Oracle Applications form
in this APPL_TOP [YES]? YES *.

You have now installed the simultaneous program files
in this APPL_TOP [YES]? YES *.

Please enter the name of Oracle Applications will use to identify this APPL_TOP.

The name APPL_TOP you select must be unique within an Oracle Applications
System, must be between 1 and 30 characters long, may contain only the
alphanumeric and underscore characters and must start with a letter.

APPL_TOP sample names: "prod_all", "demo3_forms2" and "forms1.

APPL_TOP name [r12]: r12 *.

You are about to apply a patch for the installation of the Oracle Applications
in your database to ORACLE "SCREW".
using ORACLE executable files in ' / u01/oracle/VIS/apps/tech_st/10.1.2'.

This is the database correct [Yes]? Yes

AutoPatch needs the password for your schema ORACLE 'SYSTEM '.
to determine the configuration of your installation.

Enter the password for your schema ORACLE 'SYSTEM ': *.

Connecting to the SYSTEM... Successfully connected.

The ORACLE username specified below for Application Object Library
uniquely identifies your existing product group: APPLSYS

Enter the password of ORACLE Application Object Library [APPS]: *.

AutoPatch checks your name of user and password.
Connecting to APPLSYS... Successfully connected.

The status of the different features in this performance of the AutoPatch is:

<-feature version in - >
Function Active? Flags of APPLTOP data model
------------------------------ ------- -------- ----------- -----------
CHECKFILE Yes 1 1 O N N O N O
PREREQ Yes 6 6 O N N O N O
CONCURRENT_SESSIONS NO. 2 2 Y O N Y O N
PATCH_TIMING Yes 2 2 O N N O N O
PATCH_HIST_IN_DB Yes 6 6 O N N O N O
SCHEMA_SWAP Yes 1 1 O N N Y Y Y
JAVA_WORKER Yes 1 1 O N N O N O
CODELEVEL Yes 1 1 O N N O N O

Connecting to the SYSTEM... Successfully connected.

Connecting to APPLSYS... Successfully connected.

The current session identifier is 542215

Product file information...

AutoPatch error:
Incorrect format of the file:

/U01/Oracle/vis/apps/apps_st/appl/Admin/applprod.txt

The file has the format ' % 12.0.A by applprod file format
'
and this version of AutoPatch requires the format ' % 12.0.A by applprod file format'

You must check the file
/U01/Oracle/vis/apps/apps_st/appl/Admin/vis/log/adpatch.log

to find errors.

Start of session AutoPatch *.
AutoPatch version: 12.0.0
AutoPatch started at the: Monday, June 25, 2012 16:02:34

APPL_TOP is defined on/u01/oracle/SCREWS/apps/apps_st/appl

Options = "/hotpatch."

The value of NLS_LANG environment is: American_America.AL32UTF8
NLS_LANG value for utility AD run is: AMERICAN_AMERICA. AL32UTF8

Backup restart files, as appropriate. Fact.

Your previous session to autopatch did not stand up to the end.
You want to continue your previous session to AutoPatch [Yes]? NO.

You have chosen to ignore your previous session AutoPatch
and restart the AutoPatch early.

------------------------------------------------------------------------
If you partially applied a hotfix, you should continue with your
AutoPatch previous session until it completes successfully.

If you try to re - apply a patch you applied only partially,
AutoPatch can apply the patch incorrectly.
------------------------------------------------------------------------

Enter Yes to confirm that you want to replace your old
AutoPatch session and start a new session of autopatch.

Enter number to continue with your previous session AutoPatch. [No.]: Yes

You can be notified by e-mail if an error occurs.
You want to enable this feature [no]? NO.

Please enter the batchsize [1000]: 1000

Please enter the name of the Oracle Applications system what
APPL_TOP belongs to.

Application system name must be unique on all Oracle
Applications of the systems at your site, must be between 1 and 30 characters
for a long time, can only contain alphanumeric characters and underline characters.
and must begin with a letter.

Sample application system names: 'prod', 'test', 'demo' and
"Development_2.

Name of the system of applications [SCREW]: SCREW *.

NOTE: If you do not currently have certain types of installed files
in this APPL_TOP, you may not be able to perform certain tasks.

Example 1: If you do not have the files used for installation or upgrade
the database has been installed in this area, you can install or upgrade
the database of this APPL_TOP.

Example 2: If you do not have the form files installed in this area, you can't
generate or run them from this APPL_TOP.

Example 3: If you have not installed in this area, the simultaneous program files
You cannot connect concurrent programs or generate reports of this APPL_TOP.

You currently have files used for the installation or the upgrade of the database
installed in this APPL_TOP [YES]? YES *.

You currently have HTML and Java files to HTML-based features
installed in this APPL_TOP [YES]? YES *.

You currently have files installed Oracle Applications form
in this APPL_TOP [YES]? YES *.

You have now installed the simultaneous program files
in this APPL_TOP [YES]? YES *.

Please enter the name of Oracle Applications will use to identify this APPL_TOP.

The name APPL_TOP you select must be unique within an Oracle Applications
System, must be between 1 and 30 characters long, may contain only the
alphanumeric and underscore characters and must start with a letter.

APPL_TOP sample names: "prod_all", "demo3_forms2" and "forms1.

APPL_TOP name [r12]: r12 *.

You are about to apply a patch for the installation of the Oracle Applications
in your database to ORACLE "SCREW".
using ORACLE executable files in ' / u01/oracle/VIS/apps/tech_st/10.1.2'.

This is the database correct [Yes]? Yes

AutoPatch needs the password for your schema ORACLE 'SYSTEM '.
to determine the configuration of your installation.

Enter the password for your schema ORACLE 'SYSTEM ': *.

Connecting to the SYSTEM... Successfully connected.

The ORACLE username specified below for Application Object Library
uniquely identifies your existing product group: APPLSYS

Enter the password of ORACLE Application Object Library [APPS]: *.

AutoPatch checks your name of user and password.
Connecting to APPLSYS... Successfully connected.

The status of the different features in this performance of the AutoPatch is:

<-feature version in - >
Function Active? Flags of APPLTOP data model
------------------------------ ------- -------- ----------- -----------
CHECKFILE Yes 1 1 O N N O N O
PREREQ Yes 6 6 O N N O N O
CONCURRENT_SESSIONS NO. 2 2 Y O N Y O N
PATCH_TIMING Yes 2 2 O N N O N O
PATCH_HIST_IN_DB Yes 6 6 O N N O N O
SCHEMA_SWAP Yes 1 1 O N N Y Y Y
JAVA_WORKER Yes 1 1 O N N O N O
CODELEVEL Yes 1 1 O N N O N O

Connecting to the SYSTEM... Successfully connected.

Connecting to APPLSYS... Successfully connected.

The current session identifier is 542216

Product file information...

AutoPatch error:
Incorrect format of the file:

/U01/Oracle/vis/apps/apps_st/appl/Admin/applprod.txt

The file has the format ' % 12.0.A by applprod file format
'
and this version of AutoPatch requires the format ' % 12.0.A by applprod file format'

You must check the file
/U01/Oracle/vis/apps/apps_st/appl/Admin/vis/log/adpatch.log

to find errors.

Thanks and greetings
Surendra

---------------------------------------------------------------------------------------------------------------------------------------------------------------------
898768 wrote:
According to metalink solution I apply this hotfix.

What is the doc of MOS?

AutoPatch error:
Incorrect format of the file:

/U01/Oracle/vis/apps/apps_st/appl/Admin/applprod.txt

The file has the format ' % 12.0.A by applprod file format
'
and this version of AutoPatch requires the format ' % 12.0.A by applprod file format'

Have you downloaded the correct version that applies to your operating system and applications of output?

Please also see the solution in (Incorrect File Format: Applcust.Txt - the file has the format ' % applcust queue format 11.5.A^M' [1300257.1 ID]).

Thank you
Hussein

Error while executing the code as user sys
Hello
The following code creates a procedure. Although the proc is created successfully, as he tried to run, I get the below error

ORA-01031: insufficient privileges
ORA-06512: at "SYS." DBMS_SESSION", line 101
ORA-06512: at "SYS." MY_TEST_PROC', line 20
ORA-06512: at line 1

The proc is created by sys and executed by sys too

create or replace procedure my_test_proc as
TYPE CUR1 IS REF CURSOR;
CURSOR c1 is
Select ename from SCOTT.emp where rownum < 2;
v_Name varchar2 (30);
MY_CUR CUR1;
STRQRY VARCHAR2 (2000);
L_PARAM DBMS_SQL. VARCHAR2S;
THE CNT NUMBER;
SCOTT V_DATA. EMP % ROWTYPE;
BEGIN
STRQRY: = ' SELECT * FROM SCOTT. EMP WHERE 1 = 1 and ((1 = 1) ';)
CNT: = 0;
Open c1;
loop
Fetch c1 into v_name;
When exit c1% notfound;
CNT: = CNT + 1;

DBMS_SESSION.set_Context ('MY_CTX', 'ENAME_' |) CNT V_NAME);
STRQRY: STRQRY = | "OR (ENAME = SYS_CONTEXT ("MY_CTX","ENAME_1")';)"

end loop;
DBMS_OUTPUT. PUT_LINE(STRQRY ||) ')');

CLOSE C1;
END my_test_proc;

============================================================

EXEC my_test_proc;

Help, please.
>
STRQRY: = ' SELECT * FROM SCOTT. EMP WHERE 1 = 1 and ((1 = 1) ';)
>
The query above will not work because there is a syntax error.
Count the number of left and right parentheses.

Edit your post and use the code and tell us who is line #20.

My guess is that it's this line
```
dbms_session.set_context('MY_CTX','ENAME_' || CNT, V_NAME); 
```
You don't show any CONTEXT procedure code. DBMS_SESSION. SET_CONTEXT in doc PL/SQL Packages and Types
See http://docs.oracle.com/cd/B28359_01/appdev.111/b28419/d_sessio.htm#i1010942
>
SET_CONTEXT caller must be in the call stack of a procedure that has been associated with the context namespace via a statement of CONTEXT to CREATE. The call stack checking does not reach a limit of DBMS.

Error while executing the FilterImplementor
Hello

I created a cutom component and try to substitute class FilterImplementor for the CheckIn event. During the Check-In of new content, I get the following error message

Content Server request failed

The content item was not successfully verified. Impossible to filter 'NBNCustomVersion.CheckinFilter' of type 'validateStandard '. Failed to instantiate class code java to 'NBNCustomVersion.CheckinFilter' instead of 'NBNCustomVersion.CheckinFilter '.

Please let me know how I can fix the problem.

Thank you
Sarang
Problem is probably caused by your java class custom not being is not in the path. Check the following points:

Java component classes are located in the: CustomComponent\classess\NBNCustomVersion\CheckinFilter.class while your java package name is NBNCustomVersion and the class name is CheckinFilter

File CustomComponent.hda contains the line: classpath = $COMPONENT_DIR/classes (for the 11.1.1.6 Server)

or

File CustomComponent.hda contains the line: classpath = $COMPONENT_DIR/classes/NBNCustomVersion (for 11.1.1.5 server and earlier versions)

and that you have restarted Content Server after any change of component.

It could be another problem, but it is the first to check.

Kind regards
Boris

Error starting & quot; while executing onLoad in Design Notes_onOpen.htm...
I use Dreamweaver CS3 on Vista.

Yesterday I started getting the error "while executing onLoad in design Notes_onOpen.htm, a JavaScript error occurred."

The error appears twice at the start and then it pops up twice, whenever I open a document and twice every time I close a document.

I have not found much looking for an answer on that. I tried to search through these files and who don't will bring me no part either.

Help, please. Thank you!
Thank you! Deleting the .dat file did the trick

ORA-29913: error in executing ODCIEXTTABLEPOPULATE legend while expdp
Hi all
My bottom, expdp command fails with the error below:

With the options of partitioning and Data Mining
Start "TKSDBO53". "' EXPDP_AR1_TAX_ITEM ': TKSDBO53/***@INTKS10G tables = AR1_TAX_ITEM DUMPFILE=DUMP:Expdp_AR1_TAX_ITEM_%U.dmp LOGFILE = LOG:Expdp_AR1_TAX_ITEM.log CONTENT = DATA_ONLY FILESIZE = 5 G EXCLUDE = INDEX, STATISTICS, CONSTRAINTS, GRANT PARALLEL = JOB_NAME 5 = Expdp_AR1_TAX_ITEM
Current estimation using BLOCKS method...
Processing object type TABLE_EXPORT/TABLE/TABLE_DATA
Total estimation using BLOCKS method: 19,80 MB
ORA-31693: Data Table object 'TKSDBO53 '. "' AR1_TAX_ITEM ': 'AMAXVALUE_BMAXVALUE' failed to load/unload and being ignored because of the error:
ORA-29913: error in executing ODCIEXTTABLEPOPULATE legend
ORA-00001: unique constraint (TKSDBO53. SYS_C00612451) violated
ORA-06512: at "SYS." "KUPF$ FILE ', line 2580
ORA-06512: at line 1
. . exported "TKSDBO53." "' AR1_TAX_ITEM ': 'AMAXVALUE_BMAXVALUE' 324 lines 0 KB
Table main "TKSDBO53." "' EXPDP_AR1_TAX_ITEM ' properly load/unloaded

The command I use is
expdp TKSDBO53/TKSDBO53@INTKS10G tables = AR1_TAX_ITEM DUMPFILE=DUMP:Expdp_AR1_TAX_ITEM_%U.dmp LOGFILE = LOG:Expdp_AR1_TAX_ITEM.log CONTENT = DATA_ONLY FILESIZE = 5 G PARALLEL = JOB_NAME 5 = Expdp_AR1_TAX_ITEM2

> uname
Linux

SQL > select * from v version $;

BANNER
----------------------------------------------------------------
Oracle Database 10 g Enterprise Edition release 10.2.0.3.0 - 64bi
PL/SQL version 10.2.0.3.0 - Production
CORE Production 10.2.0.3.0
AMT for Linux: release 10.2.0.3.0 - Production
NLSRTL Version 10.2.0.3.0 - Production

Please suggest what should I do?

Regds,
Malika
Hmm... Interesting though!

I think that not some problems that cannot be solved by forum / distance helps. This is one of them. Probably in support of the Oracle if the place where you can solve the problem that why this db rests with ora-29913 while others are not. still the same table structure. If you Gets the support of oracle response, then please post it here (only if it does not violate EULA).

Or, please wait for the response by other members of the forum.

Concerning
Girish Sharma

Error Message displayed when executing command FNDLOAD machine in windows
Hello

I get the following error when executing the command FNDLOAD in the Windows Machine. Can someone give some details for this problem.

FNDLOAD command used: *.

+. / FNDLOAD apps / [email protected]:1521:OA10 0 DOWNLOAD D:\oracle\oa10appl\xdo\11.5.0/patch/115/import/xdotmpl.lct xdotmpl.ldt XDO_DS_DEFINITIONS APPLICATION_SHORT_NAME = IN.

Error message is displayed for order above:_
APP-FND-01564: Error ORACLE 6401 AFPCOA
Cause: AFPCOA failed due to the ORA-06401: NETCMN: invalid driver indicator

Let me know the solution of this problem

Concerning
Mohammed Arif
Please try this format for the JDBC_CONNECTION and see if you get the error-' (DESCRIPTION = (ADDRESS = (PROTOCOL = tcp) (HOST =)(PORT=)) (CONNECT_DATA = (SERVICE_NAME =)))'

If you still have the same question, then please connect a SR.

Thank you
Hussein

Get the error when executing the duplicate command
RMAN > JEFFDUP duplicate target database;

From duplicate Db 18 January 11
using the control file of the target instead of recovery catalog database
allocated channel: ORA_AUX_DISK_1
channel ORA_AUX_DISK_1: sid = 156 devtype = DISK

content of Script memory:
{
until the SNA 1188531.
the value of newname for datafile 1 to
"C:\ORACLE\SYSTEM01. DBF ';
the value of newname for datafile 2 to
"C:\ORACLE\UNDOTBS01. DBF ';
the value of newname for datafile 3 to
"C:\ORACLE\SYSAUX01. DBF ';
the value of newname for datafile 4 to
"C:\ORACLE\USERS01. DBF ';
the value of newname for datafile 5 to
"C:\ORACLE\EXAMPLE01. DBF ';
restoration
see readonly
clone database
;
}
execution of Script memory

executing command: SET until clause

executing command: SET NEWNAME

executing command: SET NEWNAME

executing command: SET NEWNAME

executing command: SET NEWNAME

executing command: SET NEWNAME

From restoration to January 18, 11
using the ORA_AUX_DISK_1 channel

channel ORA_AUX_DISK_1: from datafile backupset restoration
channel ORA_AUX_DISK_1: specifying datafile (s) to restore from backup set
restoring datafile 00001 to C:\ORACLE\SYSTEM01. DBF
restoring datafile 00002 to C:\ORACLE\UNDOTBS01. DBF
restoring datafile 00003 to C:\ORACLE\SYSAUX01. DBF
restoring datafile 00004 to C:\ORACLE\USERS01. DBF
restoring datafile 00005 to C:\ORACLE\EXAMPLE01. DBF
channel ORA_AUX_DISK_1: reading from the backup C:\ORACLE\PRODUCT\10.2.0\DB_2\FLASH_RECOVERY_AREA\ORCL4\BACKUPSET\2011_01_10\O1_MF_NNNDF_TAG20110110T001815_6L piece
QJM5_. BKP
channel ORA_AUX_DISK_1: restored the backup part 1
room handle=C:\ORACLE\PRODUCT\10.2.0\DB_2\FLASH_RECOVERY_AREA\ORCL4\BACKUPSET\2011_01_10\O1_MF_NNNDF_TAG20110110T001815_6LN0QJM5_. Tag BKP = TAG20110110T001815
channel ORA_AUX_DISK_1: restoration complete, duration: 00:01:06
Finished restore-18 Jan 11
SQL statement: CREATE 'JEFFDUP' of CONTROLFILE REUSE DATABASE RESETLOGS ARCHIVELOG VALUE
MAXLOGFILES 16
MAXLOGMEMBERS 3
MAXDATAFILES 100
MAXINSTANCES 8
MAXLOGHISTORY 292
LOGFILE
GROUP 1 (' C:\ORACLE\REDO01.) LOG ') RE-USE OF SIZE OF 50 M.
GROUP 2 (' C:\ORACLE\REDO02.) LOG ') RE-USE OF SIZE OF 50 M.
GROUP 3 (' C:\ORACLE\REDO03.) LOG ') SIZE 50 M REUSE
DATA FILE
' C:\ORACLE\SYSTEM01. DBF'
WE8MSWIN1252 CHARACTER SET

**RMAN-00571: ===========================================================**
* RMAN-00569: = ERROR MESSAGE STACK FOLLOWS = *.
**RMAN-00571: ===========================================================**
* RMAN-03002: failure of Db in dual at 18/01/2011 19:10:32 *.
* Error ORACLE RMAN-06136: auxiliary database: ORA-01503: CREATE CONTROLFILE failure *.
* ORA-01130: database file version 10.2.0.3.0 incompatible with ORACLE version 10.2.0.0.0 *.
* ORA-01110: data file 1: ' C:\ORACLE\SYSTEM01. DBF'*.

Please help me in this...
Thank you...
ORA-01130: database file version 10.2.0.3.0 incompatible with ORACLE version 10.2.0.0.0

Visit this link:

http://www.orafaq.com/maillist/Oracle-l/2006/12/07/0255.htm

A similar problem and the reason is a COMPATIBLE lower on the side of the target parameter.

Werner

ORA-900 sql not valid reporting error while calling the optimize_index pl/sql procedure

Hi Experts,

I'm on Oracle 11.2.0.3 on Linux and I have installed in my database Oracle text. I want to configure annex dbms_job to optimize my oracle text index. So first, I created a pl/sql procedure to optimize indexes. It gives me error ORA-900, but the sql even if I run in sqlplus works very well! Can you please help me the question is to find:

Here is the procedure:

(Either incidentally CTXAPP role has been granted in the schema where these Oracle text indexes are created and where the below procedure to optimize the index is running.)

CREATE OR REPLACE PROCEDURE optimize_ora_txt_indexes_debug
IS
   CURSOR cur_context_indexes
   IS
        SELECT index_name
          FROM user_indexes
         WHERE index_type = 'DOMAIN'
    AND ROWNUM<2  
    ORDER BY INDEX_NAME;
   v_user         VARCHAR2 (30);
   v_pod          VARCHAR2 (30);
   v_start_time   TIMESTAMP;
   v_end_time     TIMESTAMP;
   v_elapsed      VARCHAR2 (40);
   v_msg   VARCHAR2 (1000);
   v_error_code      NUMBER;
   v_error_msg   VARCHAR2 (1000);
   v_sql VARCHAR2 (1000);
BEGIN

   FOR c IN cur_context_indexes
   LOOP
      BEGIN
        v_sql:= 'ctx_ddl.optimize_index (idx_name =>'||chr(39)|| c.index_name||chr(39)||', optlevel => '||chr(39)||'FULL'||chr(39)||')';
        dbms_output.put_line(v_sql);
        execute immediate v_sql;
      EXCEPTION
         WHEN OTHERS
         THEN
            v_error_code := SQLCODE;
            v_error_msg := SQLERRM;
            v_msg :=
                  'Error while optimizing the index '
               || c.index_name
               || ' '
               || TO_CHAR (v_error_code)
               || ' '
               || v_error_msg;
            DBMS_OUTPUT.put_line (v_msg);

      END;
   END LOOP;

EXCEPTION
   WHEN OTHERS
   THEN
      v_error_code := SQLCODE;
      v_error_msg := SQLERRM;
      v_msg :=
            'Error while in the optimize index procedure'
         || ' '
         || TO_CHAR (v_error_code)
         || ' '
         || v_error_msg;
      DBMS_OUTPUT.put_line (v_msg);

END optimize_ora_txt_indexes_debug;
/

 --the procedure compiles successfully. 
 Now when I run it , I get the error:
SQL>exec optimize_ora_txt_indexes_debug;
ctx_ddl.optimize_index (idx_name =>'ACCESS_CLNT_IDX04', optlevel => 'FULL')
Error while optimizing the index ACCESS_CLNT_IDX04 -900 ORA-00900: invalid SQL
statement


 --When I run the same command from sqlplus as execute statement , it works fine:
SQL>exec ctx_ddl.optimize_index (idx_name =>'ACCESS_CLNT_IDX04', optlevel => 'FULL');
PL/SQL procedure successfully completed.

If everything runs from sqlplus, but fails in plsql... I'll be very grateful for pointers solve the problem.

Thanks,

OrauserN

Hello

It is a problem of pl/sql syntax. A call with EXEC is the same using BEGIN... Code of... END of block;

SO, you need to include a beginning and an end to your call:

 v_sql:= 'BEGIN ctx_ddl.optimize_index (idx_name =>'||chr(39)|| c.index_name||chr(39)||', optlevel => '||chr(39)||'FULL'||chr(39)||'); END;';

That's all.

Herald tiomela

http://htendam.WordPress.com

Error, while the creation and execution of stored procedure

Hello
I'm creating a procedure stored and discovered during the compilation and execution of procedure.
CREATE OR REPLACE PROCEDURE procTEST
AS
BEGIN
WITH
AS Report1
(
SELECT * FROM Employee
)
SELECT * FROM REPORT1
END;
/
ERROR when compiling
-------------------------------
PROCTEST update procedure
Errors: Newspaper the compiler check
ERROR when executing
---------------------------------
PROCTEST update procedure
Errors: Newspaper the compiler check
Error from line: 15 command.
EXEC procTEST
Error report-
ORA-06550: line 1, column 7:
PLS-00905: object SYSTEM. PROCTEST is not valid
ORA-06550: line 1, column 7:
PL/SQL: Statement ignored
06550 00000 - "line %s, column % s:\n%s".
* Cause: Usually a PL/SQL compilation error.
* Action:

Hello

user13360241 wrote:

I want to insert values into the table tmpemployees.

Insert into tmpemployees

Select * from Report1

CREATE OR REPLACE PROCEDURE procTEST
AS
BEGIN
WITH
AS Report1
(
SELECT * FROM Employee
)

Insert into tmpemployees

SELECT * FROM REPORT1

END;
/

I see. Then, there is no need to use the PL/SQL. All you need is:

INSERT INTO tempemployees

SELECT *.

OF REPORT1.

(assuming that the columns match Report1 tempemployees... It is best to explicitly list the individual columns, like this:

INSERT INTO tempemployees (employyee_id, first_name,...)

SELECT (col_1, col_2,...)

OF REPORT1.

)

If you need to use the PL/SQL for a reason, you could use the exact same INSERT statement in PL/SQL:

CREATE OR REPLACE PROCEDURE proctest

AS

BEGIN

INSERT INTO tempemployees (employyee_id, first_name,...)

SELECT (col_1, col_2,...)

OF REPORT1.

END proctest;

/

DISPLAY ERRORS

Error while executing command discoveryArrays: NetApp SnapMirror

Similar Questions

Maybe you are looking for