Do not properly configure updates

Updates download and install successfully.  But then I get the "Configuring updates" screen and it says that the updates were not properly set up.  The computer says then it's the return of the changes and then I don't have updates!  Someone at - it a solution?

Windows Update Forum:

It comes with Vista, upgrade install and activate Forum.

You will get the best help for any problem of Update/Service Pack in the Windows Update Forum; the link below:

http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

When you repost here, kindly include the Error Codes, and exactly what is happening when you try to update.

In this way, you will receive the best help.

See you soon.

Mick Murphy - Microsoft partner

Tags: Windows

Similar Questions

  • Problem with the Modem devices: Modem already used or not properly configured

    I use windows 8. Until last night, my laptop was working fine, but now it rejects all the modem devices, I try to plug it. I tried to connect to internet via Auntie photon and reliance netconnect +, but this message "Modem already in use or not properly configured" keeps on appearing two modem devices? Is there a problem with my OS or my laptop? Help, please

    Thanks for the solution.
    Well, my problem was similar but different too. The method to uninstall the modem device is correct. I tried, but still it did not work.
    My problem was that I have 3 different modems installed on my pc, but I used one of them. So I would uninstall only one I used. It turns out that we have to uninstall all modems. Its pretty simple, but its not so obvious. I thought about it later in like 2 days. I hope that people reading this don't have to wait 2 days to fix this problem.

  • PHP is not properly configured on your web server.

    Hello, I download a site Web of muse and me always error at the end - "1 WARNING.
    PHP is not properly configured on your web server. Forms of the muse does not work correctly unless PHP is enabled on the web server. Contact your Web host or Web site administrator on how to enable PHP support. "

    already on the site online form that do not send the email from the same mistake.

    How can I solve my problem?

    Thank you


    Margarida Amara

    Hello Margarida,

    Your Web host must support PHP and the PHP mail service must be properly configured to send e-mail messages. If you use the feature to download FTP in the Muse, Muse will attempt to warn you if it detects that your Web host does not meet these requirements.

    I suggest you contact your hosting provider in order to get this resolved.

    Thank you

    Ankush;

  • MESSAGE - LOOK AT AN ENVIRONMENT MAY NOT PROPERLY CONFIGURED TO USE ADOBE READER.  HAVE ACROBAT READER AND USED, MESSAGE RIGHT ON THIS ONE SITE. HOW DO I FIX

    HOW CAN I FIX IT?

    Hi tomp3648858,

    Please refer to this topic If look at an environment is not properly configured to use adobe what should I do?, I would like to know if it's the same scenario.

    Kind regards

    Nicos

  • PHP form script is missing from the web server or PHP is not properly configured on your web hosting provider. Help - I get this message on my site when the form is filled out and you press send... Check if the form PHP script has been downloaded correctl

    PHP form script is missing from the web server or PHP is not properly configured on your web hosting provider. Help - I get this message on my site when the form is filled out and you press send... Check if the form PHP script has been downloaded correctly, contact your host about the configuration of PHP.

    Hi Graham,

    If you, please add your site to this link ( http://my-site.com/scripts/form_check.php ) and make sure that all green checkmarks are appearing. If they don't, let us know what errors you seem to receive and include the link to your site.

    In addition, check out this guide on the forums of Muse troubleshooting: Troubleshooting Muse form used on the servers of third party Widgets

    I hope this helps!

    Emily

  • Computer will not properly install update KB976098 + new software

    I was a lot by browsing this site and saw that many people is facing the same problem. What I did find was a person with software problems.

    My computer was purchased 26/11 this year with Windows 7 pro + Microsoft office home and student . One day Windows were 27 updates to install and therefore has been left overnight. In the morning update no. 27 was still install and never finished. Had to restart the computer to exit the update screen. days later there were 4 updates to install. Still once, the last update was never completed.

    Now, there's only 1 update important remaining, KB976098 , the fix for the time zones that I presume.

    Not only the update will not install, now the new software may not be installed properly:

    I tried some actions (such as downloading stuff, install software, games) while windows tried to install the
    Update:

    • During the installation (for example.) Adobe Reader, Comodo FireWall took more than a minute to display its notice of default on an attempt to install software on the computer and therefore compromised the initial installation.
    • Turn off Comodo Firewall does not solve the problem. Delay of the computer respond when an action of the instalation was performed is the same.
    • The installation of update process could not be stopped once he was "installation."
    • The icon of 'disable' had no notification "update", but once to close the office and displays the message "loging off", the computer is never extinguished.
    • While playing an online game, nothing unusual has happened, no delay on start-up or exit.
    • When you save things like a packadge power point (for conferences of 2007 to display on older versions) the application would freeze and the package has never been created
    • Presentations PowerPoint would have graphics errors, such as the black and white rectangles containing all movable objects.

    After Force-reboot of the computer, cancel the auto-update feature and remove it from the list self-install, I retested evevrything:

    • Adobe Reader has been installed successfully, even with Comodo Firewall active
    • Comodo Firewall has reacted instantly to any attempt installation
    • More online games the same
    • PowerPoint correctly displays images and created packages without error
    • Turn the computer off was possible without forcing the stoppage.

    Now, I'm checking the updates installed and found out there are only installed 23 (in the Control Panel installed updates ). The history of the update displays more than 74 update. As mentioned previously, the first batch of update contained 27 updates, No 23 or 24. I checked some of these updates to the story:

    • There are a few updates, eg. update of security for microsoft office system who have 10 diferent KBs (being the first of its kind, his last KB974234 KB936514). Five of them have been installed twice: KB936514; KB951944; KB954326; KB956828; KB960003

    I guess in these 74 updates, replacents occurred in 23 updates, and some are not microsoft partners to be included in the Panel of installed updates . I really don't know, that's why I am asking :D

    I tried the more possible ways to install the update, downloading it mannualy, disabling the firewall, close all other applications, etc. etc...

    I would like to know the following:

    1. Why is not install update KB976098?
    2. Why other users have the same problem with recent updates?
    3. How to prevent the installation of update if the stop command does not work?
    4. How can I turn off the computer without having to install the downloaded update?
    5. Are double downloaded updates a problem?

    I wrote this for so long now. If I forgot anything, the question might be already in the text.

    Thank you for your time and patience! :)

    Read the "Updates since the previous cumulative Windows time zone update" section of http://support.microsoft.com/kb/976098. If you do not reside in one of these 14 zones, really useless this not (IMHO) security-related update, so you can just "hide":

    1. stop the automatic updates service:

    Start > Right click on run , and then select run as administrator > services.msc (type) > [OK]
    Double-click automatic updates > click stop
    (Stopping the service will take a moment)

    2 remove the contents of the download folder:

    Start > Right click on run , and then select run as administrator >
    (type or copy/paste) %windir%\SoftwareDistribution > [OK]
    Open the download folder and delete its content
    Close the window.

    3 start | Control Panel | System maintenance and (if you use Classic view, skip this step). Windows Update: Select the installed updates: right click on the Update for Windows 7 (KB976098) | Click hide update | Confirm the prompt UAC (User Account Control), if any, & OK your way out.

    4. start the automatic updates service:

    Start > Right click on run , and then select run as administrator > services.msc (type) > [OK]
    Double-click automatic updates > click Start
    (Stopping the service will take a moment)

    =====================================
    To restore/show updates in Win7: Start | Control Panel | System maintenance and (if you use Classic view, skip this step) | Windows Update | Restore hidden updates: Find and select the update you want to install. Click restore. You can now select once again it and install through the normal process.
    =====================================

    Comment: For some reason, a lot of Win7 users have had problems trying to install KB976098. for example, http://social.answers.microsoft.com/Forums/en-US/vistawu/thread/b620bb51-11e9-48f4-9a45-4034498cb8e1

    ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

  • Vista - "updates were not properly configured"

    I have a laptop running windows vista Home premium 64-bit. It has not been used for a few months and when started upward to download a lot of updates. Subsequently, he needed to reboot and now all it will do is start up and put up a screen saying that the updates are not configured correctly. Revenant changes it shows this screen for a moment then restarts and displays this screen again, then restarts so endedup in a contuneous loop. If I try to boot in safemodes he always does. using the Startup Repair tool it still does this. Advanced Startup Repair option... He always does this. I can using the startup option GET advanced a command prompt. The restoration of the system there is no restore points, and there is no image backup, anyone anyideas?

    Hi pete4740,
     
    Try these steps and check the result.
    Step 1: Start the computer with the Vista DVD to start the Windows recovery environment (WinRE)
    a. put the Windows Vista installation disc in the disc drive, and then start the computer.
    b. press a key when you are prompted.
    c. Select a language, a time, a currency, a keyboard or an input method, and then click Next.
    d. click on repair your computer.
    e. click the operating system you want to repair, and then click Next.
    f. in the System Recovery Options dialog box, click command prompt.
     
    Step 2: On the command prompt, try the following steps to rename the Pending.xml file and modify the registry
    a. type cd C:\windows\winsxs, and then press ENTER.
    Note: C: is the letter of the drive where Windows is installed.
    b. type ren pending.xml pending.old, and then press ENTER.
    c. type regedit and press ENTER.
    d. Select Computer\HKEY_LOCAL_MACHINE
    e. on the file menu, click on load the hive.
    f. find the following folder: C:\windows\system32\config\components
    g. When you are prompted for a name, type Offline_Components
    h. in the registry editor, locate and delete the following registry subkey:
    HKEY_LOCAL_MACHINE\Offline Components\AdvancedInstallersNeedResolving
    HKEY_LOCAL_MACHINE\Offline Components\PendingXmlIdentifier
    i. exit the registry editor.
    j. at the command prompt, type exit and hit enter to quit the command prompt.
    k. remove the Vista DVD and restart the computer.
    l. check if the system starts fine.
     
    Important: Modifying the registry incorrectly will cause serious damage on Windows. Back up the registry before you edit it.
    See Back up the registry

    Kind regards
    Syed - Microsoft technical support.
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Repeat me udate was not properly configured for Windows Vista update (platform) _

    It is after it is downloading and restarting the computer.

    Hello

    I guess that part of the question could be a driver which is really old or similar should not be loaded.

    This exit Windows updates on (after you have access) and stop the updates of the driver to load.

    How to disable automatic driver Installation in Windows Vista - drivers
    http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
    http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

    ---------------------------------------------------

    You can use the solutions in this KB - 3 methods and I listed a little help for them below

    The update is not installed successfully, you receive a message, and the computer restarts when you try to
    install an update in Windows Vista
    http://support.Microsoft.com/kb/949358

    Method 1: Start Windows Vista with the Windows installation media and use the repair feature

    How to do a startup repair in Vista
    http://www.Vistax64.com/tutorials/91467-startup-repair.html

    You can also do a safe mode startup repair to access the Recovery Options If you have them available
    or use the DVD as described above.

    This tells you how to access the System Recovery Options
    http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

    Try recovery options Startup Repair

    How to do a startup repair
    http://www.Vistax64.com/tutorials/91467-startup-repair.html

    Method 2: Start the system in safe mode and then use the system restore feature

    How to make a Vista system restore
    http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

    You can also do a restore of the system of starting with a Vista disk.

    Method 3: Rename the Pending.xml file, and then change the registry (this method is part of the advanced troubleshooting)

    See article below for that.

    You can use this method on the updates that have this problem.
    http://support.Microsoft.com/kb/949358

    Hide the update (click right - HIDE in the updates of Windows) and go to the Microsoft Download Center to download
    and install it.

    Microsoft Download Center
    http://www.Microsoft.com/downloads/en/default.aspx

    ------------------------------------------------------

    Once you are in Windows I was running once again reset here as a precaution.

    How to reset the Windows Update components?
    http://support.Microsoft.com/kb/971058

    Hope this helps sort it out for you.
    Rob - bicycle - Mark Twain said it is good.

  • Updates will not charge they have not properly configured. error 80246007

    Response of the system is that they are not configured acorrectly. Error message refers to 80246007. I tried, but they don't always load. They interrupt to appempt at any time to recharge.

    Try the procedure described here: http://support.microsoft.com/kb/971058

    as well as the verification of the system for errors: http://support.microsoft.com/kb/929833

  • headphone 3.5 mm jack does not properly after update iOS10

    Headphone Jack is not working properly since I have updated to iOS 10, now on 10.0.2, before you start, I would say that my headphones work perfectly, I tried on other equipment, including my old ipod.

    So, here's what happened, whenever I plugged and you try to play a song on music or a video on youtube, I could not get any audio, restart the phone partially solve the problem, I managed to play ringtones in the settings menu without any problem, on both my headphones and loudspeaker at the same time , which I don't know if it is planned, I think it must have something to do with some bugs in iOS 10?

    someone at - it a similar experience or a solution?

    Hi oramicle,

    On the device that you have a problem? I also have this problem on the iphone 6 s. On two different helmets. It's certainly iOS 10.x, because I don't have this problem on the same device and helmet on iOS 9.x. I sent the bug report to Apple with this description:

    After some headphone output (jack 3, 5mm) at the moment does not work on iphone 6s 128GB, iOS 10.0.1 and 10.0.2 - no sound from the headset. Volume controls and MIC still works. When I make a call with the headset plugged and tapping on the microphone, I hear sound for headphone listening, but the others its not. No noise in other applications. Restart the temporary fix of the device this problem.

  • The 'Wireless Network Connection 3' network card is not properly configured to use the IP protocol

    I can't connect to any internet. I'm trying to connect to wireless hotspots, but it tells me that I am connected with limited access

    Hi idkmyname

     

    1. What is the exact error message displayed when you try to go online?
    2. do you have updated the network card drivers installed?
    3. What is the brand and model of the computer?

     

    Method 1:
    You can check the links below and check out them if the steps to help you resolve the issue-
    http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-Internet-connection-problems

    http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-connection-problems

    You can also check the help links below-
    http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-finding-wireless-networks
    http://Windows.Microsoft.com/en-us/Windows/help/wireless-network-connection-problems-in-Windows

    Method 2:
    You can follow the steps below to check the NIC in Device Manager. I suggest you to uninstall and reinstall the NIC drivers and check:

    a. click Startand then click Control Panel.

    b. click system and Maintenance, click Systemand then click on Device Manager.
    Note If Control Panel is in Classic view, double-click System, and then click Device Manager.
    If you are prompted for an administrator password or a confirmation, type the password, or click allow.
    Check if you have any exclamation point beside the devices listed. If you have, then there is problem with the card is installed.

    c. in the NIC, expand adapter, right click on the devices listed and then click Uninstall.
    When you are prompted to confirm that you want to remove the device, click OK.

    d. restart the computer.

    After the computer restarts, the drivers will be installed automatically. Check after this procedure if you are able to get access to the network.

     

    If you get all the drivers related errors, you can check if you have the latest drivers updated, installed for the network card. See the help link - below
    http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly


    I hope this helps.

  • Connection to the MDEX error. The data service associated with this editor is not properly configured.

    Hello world

    I just change the demand for short CRS, I added an adapter record pipeline everythings run ok and I can download data and search for data using the endeca_jspref page. But when I open the Workbench of short and tried to look at the properties, this error is displayed.

    Any sugestion?

    CapturaEXMA.PNG

    It's the new Pipeline

    CapturaPipeline.PNG

    It's the editors.xml on the APPS/CRS/config/editors_config/editors.xml

    <EditorConfig xmlns="http://endeca.com/schema/editor-config/2010">
    <EditorModule url="/ifcr/tools/pbx/modules/editors.swf">
        <!-- Default Guided Search Editors -->
        <Editor name="editors:BooleanEditor">
            <EditorConfig ></EditorConfig>
        </Editor>
        <Editor name="editors:ChoiceEditor">
            <EditorConfig ></EditorConfig>
        </Editor>
        <Editor name="editors:ColorEditor">
            <EditorConfig ></EditorConfig>
        </Editor>
        <Editor name="editors:DynamicSlotEditor">
            <EditorConfig ></EditorConfig>
        </Editor>
        <Editor name="editors:NumericStepperEditor">
            <EditorConfig ></EditorConfig>
        </Editor>
        <Editor name="editors:RadioGroupEditor">
            <EditorConfig ></EditorConfig>
        </Editor>
        <Editor name="editors:RecordListEditor">
            <EditorConfig resourcePath="/configuration/tools/xmgr/services/dataservice.2.json">
                <RecordsPerPageOptions>
                    <RecordsPerPage>10</RecordsPerPage> 
                    <RecordsPerPage>25</RecordsPerPage> 
                    <RecordsPerPage>50</RecordsPerPage> 
                </RecordsPerPageOptions>
            </EditorConfig>
        </Editor>
        <Editor name="editors:SliderEditor">
            <EditorConfig ></EditorConfig>
        </Editor>
        <Editor name="editors:StringEditor">
            <EditorConfig ></EditorConfig>
        </Editor>
        <Editor name="editors:StringMapEditor">
            <EditorConfig ></EditorConfig>
        </Editor>
        <!-- Experience Manager Editors -->
        <Editor name="editors:BoostBuryEditor">
            <EditorConfig ></EditorConfig>
        </Editor>
        <Editor name="editors:DebugEditor">
            <EditorConfig ></EditorConfig>
        </Editor>
        <Editor name="editors:DimensionListEditor">
            <EditorConfig ></EditorConfig>
        </Editor>
        <Editor name="editors:DimensionSelectorEditor">
            <EditorConfig ></EditorConfig>
        </Editor>
        <Editor name="editors:DimvalListEditor">
            <EditorConfig ></EditorConfig>
        </Editor>
        <Editor name="editors:GuidedNavigationEditor">
            <EditorConfig ></EditorConfig>
        </Editor>
        <Editor name="editors:LinkBuilderEditor">
            <EditorConfig>
                <host>localhost</host>
                <port>15002</port>
                <spec></spec>
                <searchKey></searchKey>
                <rollupKey></rollupKey>
                <matchMode>allpartial</matchMode>
                <imgUrlProperty></imgUrlProperty>
                <properties>
                </properties>
            </EditorConfig>
        </Editor>
        <Editor name="editors:RecordStratificationEditor">
            <EditorConfig resourcePath="/configuration/tools/xmgr/services/dataservice.2.json">
                <RecordsPerPageOptions>
                    <RecordsPerPage>10</RecordsPerPage> 
                    <RecordsPerPage>25</RecordsPerPage> 
                    <RecordsPerPage>50</RecordsPerPage> 
                </RecordsPerPageOptions>
            </EditorConfig>
        </Editor>
        <Editor name="editors:RichTextEditor">
            <EditorConfig ></EditorConfig>
        </Editor>
        <Editor name="editors:SortEditor">
            <EditorConfig ></EditorConfig>
        </Editor>
        <Editor name="editors:XmlEditor">
            <EditorConfig ></EditorConfig>
        </Editor>
    </EditorModule>
    <GlobalEditorConfig></GlobalEditorConfig>
</EditorConfig>

    Hi all, I'm here to say that I found the problem on the dataservice.json it is located in APPS/CRS/config/editors_config/services/dataservice.json, the CRS app uses a key repositoryId, rollup and I added a few records that do not have this property if when the CRS app tries to make the group by using this key, it fails.

    Best regards!

  • Initial setup of Orchestrator: Plugins not properly configured

    vCO_plugins1.png

    I got most of the way through the initial configuration of the vCO device 5.1 but I'm stuck at this point and can't find what kind of credentials, I need to enter the user name: field (I think)

    vCO_plugins2.png

    I have successfully configured authentication to use our Active Directory, I have created a new group for administrators of VCO and identified the unique name of this group on the Authentication tab.

    Any help is greatly appreciated.

    Brian

    It works if you leave these fields empty right?

    If this is not the case, try the username@domain syntax to specify the user name.

    See you soon,.

    Joerg

  • GUI of tabular forms refreshing not properly after update

    Hello

    I have a few apps using a tabular presentation which is not updated correctly. They are all views on the base with a couple of them having triggers to handle the update.

    When the screen is refreshed after the update, it shows the original data before the user made the change. However, the database is updated correctly and the shape is correct after the update of the browser.

    I have tried everything I can think of, changing reconstruction through settings on the update/post process, as well as the report itself. I'd also appreciate a work-around, which is a way to redirect to the same page but to force a refresh.

    Here, any help would be appreciated.

    Thank you.

    MWT

    Don't remember how, but this problem has disappeared.

  • The "NVIDIA nForce 10/100 Mbps Ethernet" network card is not properly configured to use the IP Protocol on my HP vista.

    Initially my HP a6683w said that nvidia network controller experienced pilot or hardwear related issues, then NVIDIA had me download something and then restart my computer to see if the internet was starting to work again. Now, I restarted the computer and is trying to say that the adapter NVIDIA nforce 10/100 Mbps Ethernet have driver or hardware related issues. I want to just my internet to work again. How can I fix it?

    Hello

    1. have you made no hardware/software changes before the show?

    2. using an internet connection wired or wireless?

    3. are you a specific error message while trying to go online?

    Follow the steps mentioned below

    Method 1: Restart the computer using safe mode with active network.

    a. restart your computer.

    b. When you see the logo of the manufacturer of the computer, press F8.

    c. the display Advanced Startup Options , use the arrow keys to select Safe Mode with networkand press ENTER.

    d. connect to your computer with an account of a user who has administrator rights.

    Now check if you are able to connect to the network, if the problem persists, follow the next method

    Method 2:

    Follow the steps mentioned in the link and check with the question.

    http://Windows.Microsoft.com/en-us/Windows/help/network-connection-problems-in-Windows

    Method 3:

    Download and install the drivers from http://www.nvidia.com/Download/index.aspx?lang=en-us link with the question checking.

    It will be useful.

Maybe you are looking for