Error "Windows-low on registry space."

Similar Questions

• Blue C:\WINDOWS\wmcicif.dll error (Windows XP) specific module could not be found

  Blue C:\WINDOWS\wmcicif.dll error (Windows XP) specific module could not be found

  My printer kept jamming so I went to reboot my computer and this is the message that appeared and continue to appear each time that I reboot or turn my computer now.

  I deleted and re-installed my printer in the hope that it could solve my problem, however, it did not work.

  It is easy to get rid of the error message by doing something like disable the startup item in msconfig (if you can still find), but I suggest you solve the problem and not only correct the symptoms of the problem in just the startup message.  Deactivation of the item in msconfig 'fixed' nothing but the annoying startup message.
  I would recommend also you start to search in the register, unless you have a backup because there is no 'Cancel' or 'quit without saving changes' option in regedit.  If you make a mistake, that's all.
  These ideas relieve 'rapid' and sometimes risky of the symptom, but may not actually solve the problem.  Also, I'd be suspicious of ideas that begin with the words "try."  You don't need to try things, you need to fix things.
  Here are the detailed instructions that protect you and solve your problem in the 'right' way.
  There is very little. DLL files that should be loaded from the C:\WINDOWS folder and is not one of them.
  Describe your current antivirus and software anti malware situation: McAfee, Norton, Spybot, AVG, Avira
  !, Defender, ZoneAlarm, PC Tools, MSE, Comodo, etc..
  A "Cannot find...". ', ' Failed to start..., "Could not load..." ». "Might not work... "" Cannot run ""error loading... ". "or"specific module could not be found"message at startup is usually related to the malware that has been configured to run at startup, but the referenced file has been removed after a malware scan, leaving behind him a startup item or the registry entry pointing to a file that does not exist.
  It might be a removal of malicious software or an application not installed.  The entry may have a curious looking name since it was probably generated at random when the malware was installed. If you search your system for the referenced file, you may not find.
  Windows attempts to load this file but cannot locate because the file has been deleted for most probably during an analysis of the malware. However, an orphaned associate of remainders of startup parameter or registry entry and tells Windows to load the file when you start or connection.
  So you should delete the referenced entry Windows stop trying to load or run the file. It may or may not be included in the registry, but you can find it.  Autoruns (see below) you get the elements no matter where it is.
  If you just locate and uncheck the item in msconfig, which disables the element but does not remove the reference to the element of false starting your computer.   The msconfig program is not a Startup Manager, that's a troubleshooting tool.  Disabling things in msconfig to put an end to the messages and think that your problem is solved is short-sighted and leave behind him a sloppy XP configuration.  Just disable the display of a start-up error message should not count as a 'solution' to the problem.
  If you are comfortable editing the registry, you can find and remove the reference directly from there or remove it using a popular third-party tool called Autoruns.  The problem can always be found in the registry well.
  Before making any changes to your registry by hand or with third-party tools, don't forget to first make a backup of the registry. There is no cancellation or exit without saving the option in regedit.
  Here is a link to a popular registry backup tool:
  http://www.SnapFiles.com/get/ERUNT.html
  You can use Autoruns to find the element of start remains little matter where he's hiding.  Autoruns does not install anything on your computer.  It will display all startup locations where the reference may be then you can turn it off or remove it completely.  Here is the download link for Autoruns:
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Run Autoruns.exe and wait that he at the end of the filling of the list of entries.
  When the Autoruns is finished scanning your system, it will say "Ready" in the lower left corner.  Autoruns can be a little intimidating to first if you have never seen it before because it displays a lot of information.  You are really interested only a few sections.
  The problem is usually to start the system or the user startup entries, then click the connection tab and see if the startup item is there.
  Scroll through the list and look for a boot entry associated files in the error message.
  If you can't find on the connection tab, look in any tab.
  You can also click file, search to search for logon, or any tab for all or part of the name of the element.
  Right-click on the offending entry and choose Remove
  .  If you are not sure what it is, you can simply disable, restart and if the problem is resolved and then remove the offending entry.  If you don't see it in Autoruns, you may edit the registry and remove the item from your startup folder it.  Autoruns shall display the same information however.
  Given that you had or have an infection, followed with this:
  Perform scans for malware, and then fix any problems:
  Download, install, update and do a full scan with these free malware detection programs:
  Malwarebytes (MMFA): http://malwarebytes.org/
  SUPERAntiSpyware: (SAS): http://www.superantispyware.com/
  They can be uninstalled later if you wish.
  Restart your computer and solve the outstanding issues.

  Do, or do not. There is no test.

  I need YOUR voice and the points for helpful answers and propose responses. I'm saving for a pony!

• Even with safe mode Windows 7 error "Windows Explorer has stopped working". Screen is blank with only the specified cursor.

  Using Win 7 Home 64 bit:
  After the connection, I get "Windows Explorer has stopped working" its InPageError says in details
  Auto check solution online does not come to the top with a solution
  the screen is black nothing happens.

  I opened in safe mode, same problem.

  the only thing I can do is ctrl/alt/del and open Task Manager. When I tried to open the new task... Task Manager stopped working

  Request of guid, how to solve this problem. The problem started last night.

  The laptop is Lenovo G550
  Operating system: Win 7 64-bit service pack 1 - home edition

  I can email a screenshot is necessary for the InPageError
  Error state code: c0000185
  Type of media loopholes: 00000003
  OS Version:6.1.7601.2.1.0.768.3
  Locale ID: 1033
  More information 1:c785
  More information 2:c785ae48d9bd3e84e80fe64557c132ac
  Information additional 03:58 d 5
  More information 4:58d5c6fbf156506f476a5bd1fc86cfbf

  Hello

  This problem may be due to one of the following problems:

  • You are using an outdated or corrupted video driver
  • System files on your PC can be damaged or do not correspond with other files
  • You may have an infection of viruses or malware on your PC
  • Some applications or services that are running on your computer may be responsible for Windows Explorer to stop working

  Try the following steps:

  Method 1:

  Try the steps of error: Windows Explorer has stopped working

  Note: the data files that are infected must be cleaned only by removing the file completely, which means there is a risk of data loss.

  Important: the data available on bad sectors may be lost when chkdsk attempts to repair your hard drive.

  Note:

  Ignore them perform a upgrade in Place the link above.

  Also ignore the safe mode and clean boot.

  Method 2:

  We will try to start the computer in mode low resolution and check the status of the issue.

  Low resolution starts Windows using your current video driver, and using the parameters of frequency low resolution and refresh. You can use this mode to reset your display settings.

  Refer to the section:

  Turn on the video resolution (640 × 480)

  You can also check: why is my screen black when I start Windows 7?

  Registry warning: the following steps include changing the system registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article:

  Backup and restore

  http://Windows.Microsoft.com/en-us/Windows7/products/features/backup-and-restore

  It will be useful.

• Error Windows 8 DRIVER_IRQL_NOT_LESS_OR_EQUAL (d1)

  My phone rebooted in the middle of the night and there was a blue screen. I have no idea what caused it but I downloaded the memory dump file and got:

  DRIVER_IRQL_NOT_LESS_OR_EQUAL (d1)
  

  And that's all that I could understand him. I don't know what that means for the rest of the text. Here's my minidump: http://1drv.ms/1mrDTf3

  Thank you!

  * EDITED WITH THE CORRECT FILE

  Hello

  Results verified BlueScreenView WinDBG / DumpCHK.

  The Bug_Check has CAUSE D1 amd_sata.sys AMD AHCI 1.2 device driver.

  BugCheck D1, {e8, 9, 1, fffff880011ac27f}

  Probably caused by: amd_sata.sys (amd_sata + 727f)

  1. check with HP Support, their drivers and documentation online and ask in their forums
  on known problems. Update the BIOS, chipset of low-level driversand on-board major
  and drivers of different devices (see methods of updating the driver in the previous answer).

  BiosVersion = F.15
  BiosReleaseDate = 04/10/2012 - update BIOS, drivers from the chipset and drivers of key devices.
  SystemManufacturer = Hewlett-Packard
  SystemProductName = HP Pavilion Notebook PC g6
  Family = 103C_5335KV G = N L = CON B = HP S = PAV
  SystemVersion = 0889110002305910000620100
  SystemSKU = C9G71UA #ABA
  BaseBoardManufacturer = Hewlett-Packard
  BaseBoardProduct = 1849
  BaseBoardVersion = 57.2F

  HP support/troubleshooting & drivers
  http://welcome.HP.com/country/us/en/support.html

  Contact HP
  http://welcome.HP.com/country/us/en/contact_us.html

  HP forums
  http://h30434.www3.HP.com/PSG/

  -----------------------------------------

  2. make sure to run checkdisk (chkdsk):

  Try these to erase corruption and missing/damaged file system repair or replacement.

  Windows key + X (or right click in the lower left corner) - (Admin) command prompt

  C:\Windows\System32\ >

  At the prompt, type in SFC/scannow above
  (There is a space between C and /)

  How to run the command "SFC/scannow" at startup or in Windows 8
  http://www.eightforums.com/tutorials/3047-sfc-scannow-command-run-Windows-8-a.html

  -----

  Then run CheckDisk (chkfdsk/f/r)

  File (formerly Windows Explorer)

  Right click on drive C: - Properties - tab tools - error checking - Check

  Windows 8 - improve performance by optimizing your hard drive - see "to repair a drive:
  http://Windows.Microsoft.com/en-us/Windows-8/improve-performance-optimizing-hard-drive

  How to check a drive for errors with "chkdsk" in Windows 8
  http://www.eightforums.com/tutorials/6221-chkdsk-check-drive-errors-Windows-8-a.html

  ------------------------------------------------------------------

  3 a. Remove ALL power and then remove and reinstall the memory - and check the hard disk
  cable if you can (can usually only check one end as appropriate).

  How to reinstall a desktop memory Module
  http://pcsupport.about.com/od/fixtheproblem/SS/reseat_memory.htm

  The relocation of the supply and internal data cables
  http://pcsupport.about.com/od/fixtheproblem/SS/Reseat-power-cables-data-cables.htm

  3 b. check very carefully the memory (see memory test methods below). Keep in mind that
  tests of memory do detect all errors such as the tiny speed between memory differences
  modules that appear to be identical. Thus, it may be necessary exchange modules to

  in different combinations and patterns.

  4 use all the methods in the previous resolution of the problems and if necessary AFTER those run Driver
  Check.

  BCCode: d1 0x000000d1<-- read="" this="">
  

  * 1210.html http://www.faultwire.com/solutions-fatal_error/Driver-IRQL-not-less-or-Equal-0x000000D1-

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• Error message that your registry seetings were not copied correctly

  I have been using Highway 2007 since 2007 with no problems until yesterday, September 23, 2013 when I tried to use it I got the error message that your registry settings for this application were not copied correctly. Rerun the installation program

  I tried several times to put term up all without success.

  Finally, I uninstalled the program and reinstalled from the original disk but still have the same error message.

  Can someone please

  Hi Ron,

  Check out the following link. This could help you.

  Error message when you try to use the streets & trips: "your registry settings for this application were not correctly copied.

  http://support.Microsoft.com/kb/314590/en-us

  You can uninstall a program from the control panel:

  (a) press the Windows and X key to open a list of tasks from the lower left corner of the screen.

  (b) select Control Panel.

  (c) select programs and features.

  (d) double-click the program you want to uninstall, and then follow the instructions on the screen.

  If the problem persists. You can ask your question on the forum dedicated for Streets & trips for assistance on this issue.

  http://social.Microsoft.com/forums/en-us/home?Forum=streetsandtrips

  I hope this helps.

• ProcessGPORegistryPolicy: Detected the error 87 when filling registry with settings in the file to archive temporary.

  I'm seeign as below errors in gpsvc.log and gpupdate/force fails with the error below.

  "Processing of Group Policy failed because of internal system error".

  RSOP appears in the confiuration computer, registry error, Unspecified.

  ProcessGPORegistryPolicy: Detected the error 87 when filling registry with settings in the file to archive temporary.

  SetRegistryValue: Could not open the key < software\policies\microsoft\windows\windowsupdate\au=""> 87

  Could you please help in investigating it?

  Concerning

  Murali

  Hello

  I suggest you to send your request in the TechNet forums.

  http://social.technet.Microsoft.com/forums/en/category/w7itpro

  http://social.technet.Microsoft.com/forums/en/categories

• I get errors on my empty registry key

  I get errors on my empty registry key and I don't know what it is

  Edit by G225: I'm on Windows!

  Hi Clem,

  Please provide the EXACT error message and WHOLE Word for Word, including all codes.  When this error happen?  How many times does it happen?  When did start?  What version of Windows are you using?  This error occurs whenever you do something (If Yes, what is that something) or randomly?  Does it occur at startup or only after a certain time?  What exactly you do when the error occurs?  How will the error affect you (stop some programs or freeze the computer or force you to reboot or simply disappear and have no obvious effect)?

  More information we know, better we can help you.  As it is, we can do very little.  Please see the following can help you learn how to provide us with what we need to help you here: http://support.microsoft.com/kb/555375.

  Thanks and good luck!

• Error: "Windows cannot start the windows firewall/internet connection sharing (ICS) service.

  On my Eee PC under XP Home edition tablet, I get the error "Windows cannot start the windows firewall/internet connection sharing (ICS) service" when I try to access my firewall. I also can't connect to my router Wireless Lan to go on the internet. This may be due to some viruses that have been deleted using Microsoft Security Essentials.But the problem persists. Could recharge SP2 solve this problem or am I condemned to reload the operating system?

  Hi jdmanel,

  NOTE: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following link. http://support.Microsoft.com/kb/322756

  Follow the steps in the article.

  You cannot start the Windows Firewall service in Windows XP SP2

  Troubleshooting settings of Windows Firewall in Windows XP Service Pack 2 for advanced users

  For reference:

  How to manually open ports in Internet Connection Firewall in Windows XP

• Operating system is very low on disk space. NtKernel.etl takes more than 1 200 KB of space files.

  Original title: NtKernel.etl

  My Windows Vista operating system is very low on disk space. NtKernel.etl takes more than 1 200 KB of space files. Can I delete this file to create more space?

  CH

  ETL files are files of track, but that won't get back you a little more than a MB.  If you're hungry for space, it might be time for a larger drive.

• During startup, I get an error message that the registry database cannot find a file and modify registry to delete the reference to the file in the registry. How can I do this?

  Original title: Registery Error Message

  During startup, I get an error message that the registry database cannot find a file and modify registry to delete the reference to the file in the registry.  How can I do this?

  Hello

  • What were the changes made before the problem occurred?

  I recommend you perform the clean boot.
   
  Configuration of your system in a clean boot state helps determine if third-party applications or startup items are causing the problem. If so, you need to maybe contact the manufacturer of the program for updates or uninstall and reinstall the program.
   
  See the following article in the Microsoft KB for more information on how to solve a problem by performing a clean boot in Windows Vista or Windows 7:
   
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135 
   
  Note: After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

• When you try to upload a document in Word from the Internet Windows error: "Windows cannot find"C:\Users\jma1... ". »

  Whenever I try to upload a document in word from the internet, I get a msg of error "Windows cannot find"C:\Users\jma1\AppData\Local\Temp\Low... ". "It will not download every word on the internet documents. How can I fix? Please give me instructions step by step. Thank you!

  Need help

  Hello

  1. doesn't this problem occurs only with download of word or other files?

  2. what version of internet explore do you use?

  I suggest that you try to upload to another location and check.

  Method 01:

  I suggest also allows you to check in SafeMode with network.

  Advanced, including safe mode startup options

  http://Windows.Microsoft.com/en-us/Windows7/advanced-startup-options-including-safe-mode

  I suggest you to follow the methods and check.

  Method 02:

  How to remove the contents of the temporary Internet files folder

  http://support.Microsoft.com/kb/260897

  Method 03:

  I suggest you to follow the steps and check.

  Run the command to reset the low integrity level on the low folder

  (a) click the start Pearl, click on "All programs" and click on "Accessories".

  (b) right-click "Command Prompt" and click "Run as Administrator".

  (c) in the window "Administrator: command prompt", copy and paste (without the quotes)

  (d) "ICACLS"% userprofile%\AppData\Local\Temp\Low"/setintegritylevel (OI) (CI) low.

  (e) press ENTER.

  (f) restart the computer and test the issue.

• Windows deleted files to space, now my computer does not start except in safe mode. Any ideas?

  I got a message pop up saying I've been low on free space, I select the files to delete the computer option. He ran through the process and deleted files. I shut down the computer and have not used for a few days.

  I tried to connect this morning it took forever to get to the password page, when I chose my name once again it took forever to load the password box. He then told the welcome as usual, but for several minutes and then the screen turns off, I left for almost an hour and nothing. I removed the battery and connected in safe mode that began end.

  My system using windows Vista. I'm not good with computers so all ideas/help would be great.

  Hello CarrieWilliams,

  Thanks for your post.  Try a Startup Repair before leaving for the new facility.  Let us know the results, we look forward to hearing back on your part.

  See you soon

• Try to change the mouse settings in Control Panel, receive the error "windows rundll.exe host has stopped working".

  When I go into the control panel to change my settings for the mouse, I get the error "windows rundll.exe host has stopped working", therefore, you cannot change the mouse settings, how do I fix it?  My mouse is out of control! :)

  * original title - why windows will not host rundll.exe I would change my settings of the mouse? *

  Hello

  If you use 3rd party mouse drivers updated or reinstall those who, like Logitech, Microsoft
  Wireless and so on.

  =================================================================

  To solve the problems:

  If your: Windows host process Rundll32 has stopped working
  http://www.WinVistaClub.com/T40.html

  What is rundll32.exe and why it works?
  http://www.howtogeek.com/HOWTO/Windows-Vista/what-is-rundll32exe-and-why-is-it-running/

  What is the suspicious Rundll32.exe process?
  http://WindowsXP.MVPs.org/Rundll32.htm

  -----------------------------------------------------

  Try these to erase corruption and missing/damaged file system repair or replacement.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe)
  program generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Then, run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -----------------------------------------------------

  If no joy trying to determine what is the cause:

  How to troubleshoot a problem by performing a clean boot in Windows Vista
  http://support.Microsoft.com/kb/929135
  How to troubleshoot performance issues in Windows Vista
  http://support.Microsoft.com/kb/950685

  Optimize the performance of Microsoft Windows Vista
  http://support.Microsoft.com/kb/959062
  To see everything that is in charge of startup - wait a few minutes without doing anything - then right
  Click on taskbar - task manager - take a look at stored by - Services - process -.
  It's a quick reference (if you have a small box left - show for all users, then
  Check that).

  How to check and change Vista startup programs
  http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

  A quick check to see who are loading is method 2 - using MSCONFIG then after a
  a list of these here.
  --------------------------------------------------------------------

  Tools that should help you:

  Objects of process Explorer - free - find out what files, registry keys and other processes
  have open, which DLLs they have loaded and more. This exceptionally effective utility will be
  even show you who owns each process.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspx

  Autoruns - free - see what programs are configured so that it starts automatically when your
  system boots and you log in. Autoruns is also the full list of registry and files
  locations where applications can configure start automatic settings.
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Process Monitor - Free - monitor the system files, registry, process, thread and DLL activity
  in real time.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspx

  There are many excellent free tools from Sysinternals
  http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx

  -Free - WhatsInStartUP this utility displays the list of all applications that are loaded
  automatically when Windows starts. For each request, the following information
  appears: product Type of startup (registry/Startup folder), Command - Line String,
  Name, file Version, company name, location in the registry or the file system and more.
  It allows you to easily disable or remove unwanted programs that run in your Windows
  startup.
  http://www.NirSoft.NET/utils/what_run_in_startup.html

  There are many excellent free tools to NirSoft
  http://www.NirSoft.NET/utils/index.html

  Window Watcher - free - do you know what is running on your computer? Maybe not.
  The window Watcher says it all, every window created by all programs that are running, the statement
  If the window is visible or not.
  http://www.KarenWare.com/PowerTools/ptwinwatch.asp

  Many excellent free tools and an excellent newsletter at Karenware
  http://www.KarenWare.com/

  Hope these helps.

• IM using Windows Vista Aero and when I right click Desktop Properties then personalization and appearance I get and error "windows internet explore has stopped working" Please help.

  Ive had this problem for a while now... imnew for vista because it's a new computer.

  I've sorted it but I'm not sure how and now the problem is back.

  When I right click on my desktop and go to personalization , then thecustomization and appearances I get error "windows internet explore has stopped working" and I get the options"restart this program" and "find a solution for this problem" if I don't find a solution nothing happens and if I restart the program it closes it.

  Im not sure what to do as I installed all the updates, a little bit mast service Pack2, but now I can not install more as if I'm going toStart > all programs > windows update if I try to update I get the same error...

  some can help me please.

  Sally.

  Hello

  Sorry we don't communicate via this forum.

  You need a real antivirus because these are the two antispyware. You have the PCtools antivirus
  on the computer or just their toolbar in Internet Explorer?

  -------------------------------------------------

  If there is no antivirus on the computer here is what I use and recommend (except for one
  program like Prevx, you don't want more than one antivirus on the computer program
  much less running because they interfere with each other and lower security). Each combination
  of her below you will warn of malware without toolbar from PCtools running online.

  Here's what I use and recommend: (these are alll free and very effective versions.)

  Avast and Prevx proved extremely reliable and compatible with all I have
  launched on them. Microsoft Security Essentials and Prevx have also proven to be very
  reliable and compatible. Use MSE or Avast and Prevx, Prevx 3 but not all.

  Avast Home free - stop any shields is not necessary except leaving Standard, Web, and
  Operation of the network.

  Prevx - Home - free

  Windows Firewall

  Windows Defender (is not necessary if you use MSE)

  Protected IE - mode

  IE 8 - SmartScreen filter WE (IE 7 phishing filter)

  I also IE always start with asset if filter InPrivate IE 8.
  (It may temporarily turn off with the little icon to the left of the + bottom
  right of IE)

  Two versions of Avast are available 5.x and 4.8 x

  Avast - home - free - 5.x stop shields you do not use (except files, Web, network, &)
  Shields of behavior) - double click on the icon in the Notification area - real time Orange - click on the
  Shield that you want to stop - STOP. To stop the Orange icon to show an error indicator-
  Click on the Orange icon - top right - settings - click on the status bar - uncheck shields you
  disabled - click OK
  http://www.avast.com/free-antivirus-download

  Avast 4.8 x - home - free - stop shields, you don't need except leaving Standard, Web,.
  and the network running. (Double-click the blue icon - look OK. - upper left - Shields details
  Finish those you don't use).
  http://www.avast.com/free-antivirus-download#TAB4

  Or use Microsoft Security Essentials - free
  http://www.Microsoft.com/Security_Essentials/

  Prevx works well alongside MSE or Avast

  Prevx - home - free small, fast, exceptional protection CLOUD, working with other security
  programs. It is a single scanner, VERY EFFICIENT, if it finds something come back here
  or use Google to see how to remove.
  http://www.prevx.com/   <-->
  http://info.prevx.com/downloadcsi.asp  <-->

  PCmag - Prevx - Editor's choice
  http://www.PCMag.com/Article2/0, 2817,2346862,00.asp

  Also get Malwarebytes - free - use as scanner only. If you ever think malware and that
  would be unusual with Avast and occasional Prevx running with the exception of a low level cookie
  (not much), to UPDATE and then run it as a scanner. I have a lot of scanners and they
  never find anything of note that I started to use this configuration.

  http://www.Malwarebytes.org/

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Script error, invalid root in registry key 'HKCU\software\wymxuxnpw\udkvq '.

  Hello

  DELL XPS

  Windows 7 Home Premium SP1

  There is a consistent error every time that the computer starts
  and expenses of the Office:

  Script error
  "
  An error has occurred in the script on this page

  Line: 1
  Char: 71
  Error: Invalid root in registry key 'HKCU\software\wymxuxnpw\udkvq '.
  Code: 0
  URL

  Do you want to continue running scripts on this page?
  [YES] [NO]
  "

  I tried CCleaner and registry tool which sets other non obvious mistakes,

  but still has not fixed the above error.

  At the moment it's a consistent start annoying context menu
  Great short PC otherwise.

  How can this be repaired?

  Thank you
  GR

  Please download the free version of Malwarebytes.
  Update immediately.
  Do a full scan of the system
  Let us know the results at the end.

  http://www.Malwarebytes.org/products