error: windows system font is too large for STORYBOOK WEAVER runs correctly. Tried to change the screen resolution-same error

Similar Questions

• Unable to change the screen resolution in windows XP

  I have a problem with existing XP OS installed on my machine. I installed Windows XP newly.installation in the success.but screen resolution is low, I'm not able to change the screen resolution.please help me in increases the resolution of the screen.

  Make sure that you have installed the latest graphics drivers for your PC. Download and install from the Web site of the manufacturer of your PC, or if the manufacturer of the graphics card. After you install the drivers, you should have I hope more available screen reolutions to choose.

• Windows 7 changes the screen resolution when video applications go full screen.

  When I have plenty of screen some video players, that the resolution of the screen on just the ordinary 1080 p 1080 p (native) that has a refresh rate of 60 hz. As soon as I exit full screen it activates again. Would be nice but when it switches the screen is no longer fits the screen and the user interface looks very grainy, the video actually looks very good. Windows Media Player 12 for this, while VLC does not, which leads me to believe its something to do with the way that Windows Media Player makes video (which I think it uses Direct x, which uses VLC OpenGL).  I have this problem on my computer and my brothers computer I customized built. The specifications are very similar, other that my computer has an Nvidia GTS 250, and has a Nvidia GTX 275.  Is there anyway to stop it from doing this?

  Data sheet:

  Intel Core i7 clocked at 2.66 Ghz

  6 GB of ram

  ASUS P6T SE LGA 1366 Intel X 58 ATX Intel Motherboard

  
  

  Just in case people always have a problem with this problem, pls here's a solution that worked for me...

  I spent the last month trying to solve this problem, and "youemailme" (another thread here) had the correct solution for me! And so Simple!

  I noticed on Blogs that this problem has existed for at least Win98 is not your computer or your operating system.

  The question seems to be programs in your Menu has a different screen resolution to set startup, thereby causing the screen resolution change when you start your computer. This isn't a MicroSoft program error, but rather a question of "settings".

  With me, what worked were 2 things:

  (1) perform the 'clean boot process' as advised by many to determine which granted software was causing the problem... and then.

  (2) right click on the name of the program (as discovered in above) 'problem' in the Start Menu > properties > compatibility.  For some reason, there is an option to "run in 640 x 480 screen resolution", which has been verified.  This program was in the startup folder and the cause of the problem.  Then unchecked the resolution box. No problem.

  In my view, there are a large number of people dealing with this exact problem. I hope that this process of step 2 could solve their problems.

  (ps, just thinking about it now, you might not even bother with the 'clean boot process' but simply go through all your programs in your Start Menu and run the 2nd step explained above. Should work?)

  See you soon

  Stephen

• Can not reduce the brightness or can change the screen resolution to double screen in windows server 2012 R2.

  Hello Experts

  I'm new to this community and please forgive me if I hurt all over.

  Use windows server 2012 R2 on my laptop (previously I was using Windows 7 Home premium), now I cannot able to reduce brightness or can change the resolution of the screen to double (I want to connect my laptop to a bigger screen using VGA cable).

  Everything was fine using Windows 7. But after the installation of the server, I am facing this problem.

  Please help me.

  Hello

  I suggest you post your query on the TechNet forums to get help. Consult the following link:

  https://social.technet.Microsoft.com/forums/en-us/home?Forum=winserver8gen

  It will be useful.

• Recently changed the screen resolution. Said Yes when asked if I wanted larger icons on the new resolution. You want to return to the original settings.

  Sytem restore tells me that no changes.  Which is bullshit as when I went back to smaller resolution icons have been spaced more far and the gray area at the top of the screen did not return to small.  This means that I have to use the first symbol to minimize, and then right-click to get on the net.  The square and the cross are off the screen.

  Hello Elenoe,

  Thank you for visiting the Microsoft answers community.

  Not positive I understand exactly what you are trying to accomplish, however for the two questions you have with the larger icons and minimizing Internet Explorer I'll give you some steps to resolve.

  Large icons
  
  -Right-click Law Office > click Properties > click on settings tab > click on advanced > click on the general tab (if we by default)
  -Under view > compensates for the ppp settings.

  Internet Explorer minimizing
  
  From your description, it sounds like your Internet Explorer is beyond the edge of the screen.

  -Right click on the icon to the taskbar for Internet Explorer > click enlarge

  Maximize your screen to the right size?

  If the minimal State, you can't get the edges in order to size the window try:
    
  -Right click on the icon to the taskbar for Internet Explorer > click size > press your up, down, left, or right arrow key to select which edge you need to move.

  For example, if you move the right edge: press your right arrow button > by using the left and right arrow keys move the right edge of the window, and when finished press on enter

  Hope this helps

  Chris.H
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• How to change the screen resolution in Windows?

  Original title: need to adjust the size of the screen - I guess I did something to make it look great

  I need adjust the size of the letters - all is become greater when somehow I logged in today.

  I need adjust the size of the letters - all is become greater when somehow I logged in today.

  An alternative is to restore your normal DPI.

  Right-click on a free space of the desktop > customize > adjust font size (DPI) > uac prompt > click on the radio in front of the default scale (96 DPI) > OK

  Note: if necessary be > click Custom DPI > and make the changes.

  For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.

• Satellite M40: Errors graphics when you change the screen resolution

  Hello
  I have a Satellite M40 and a big problem.

  Windows xp pro sp2:
  When a program changes the resolution of the screen, the screen is messed up.
  I see only scratches and only a reboot can run back (or suspend-to-disk).

  [edit]
  I plugged an external monitor to the laptop and it works,
  the laptop screen is full of lines and the 2nd monitor shows what the laptop screen should normally display also
  [/ Edit]

  Linux:
  This can be seen also at the change of the Xwindows mode in linux back to tty(1-6)

  Here are some pictures of this strange behavior:
  http://www.ronnylindner.de/extern/images/Toshiba/Screen1.jpg
  http://www.ronnylindner.de/extern/images/Toshiba/screen2.jpg
  http://www.ronnylindner.de/extern/images/Toshiba/SCREEN3.jpg

  It looks like a hardware problem, but would it be just a bad bios setting?

  What can I do?

  Goodbye and thank you in advance, Ronny

  Post edited by: [email protected]_DE

  Hello

  There may be something wrong with the screen of laptop computers.
  I guess that the graphics card is ok because the external screen works properly.

  But it s very interesting to know if you are using the graphics driver from Toshiba. If this isn't the case, please check if this problem also appears after installation of the graphics driver from the Toshiba driver page.

• System font is too large to work with, after update

  After an update, icons, fonts, everything has so great that I can't function.  Its got so big that when I went to set the DPI its so great as OK & APPLY buttons I need to click so that he could change before I can restart to take effect.  I don't know what else to do to get it is smaller.

  * original title - everything is so great that I can't set the DPI. Can not hit APPLY or OK.*

  You don't need to click on the OK button or apply.
  Press the Enter key will be the same by clicking on apply/OK.

  In addition, if you press Tab key + down arrow key, if scrolled down.

  For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.

• Objects too large for Inspiron mini 10 - Windows XP

  Hi all

  I hope someone can help.

  I have a Dell Inspiron Mini 10 - Windows XP and I have recently put it in a factory reset just to give it a new impetus because it seems to be runing slowly.  Now that he's back him speede it fine but I have a problem with my screen.  All too big i.e. icons, start button etc.  This means when I have any program up that I have to scroll around.  I changed the zoom level for each individual program but it does not help.  I was in Control Panel and tried to change the screen resoluntion however it only allows me to move from a configuration option to the other, which I think is the solution.

  I didn't have this problem before the factory reset, so I think there must me an easy soluntion I'm not aware of.  Y at - it a disc that I missed off the coast?  I downloaded all updates including windows sent through.  Don't know what to do.

  If anyone can help, I'd appreciate it.  Microsofts soluntion was "buy a new PC", not useful!.

  Thank you

  I was in Control Panel and tried to change the resolution of the screen however it only allows me to move from a configuration option to the other, which I think is the solution.

  Right-click on an empty space on the desktop and select Properties.  Then select the tab "settings".  Can you drag the slider under "Screen Resolution" right?  What is the value?

  

  If this does not work...

  Over the years, Dell has had a number of different methods to do a "factory reset", so I don't know what you could have done... but it seems that if you do not reinstall the drivers, in particular, the driver of the video card.

  Go here--> http://www.dell.com/support/home/us/en/04/product-support/product/inspiron-mini10/configuration and either submit your Dell Service number or click on the button "Scan now" to see what drivers you need.

• Value too large for column

  Hello
  
  I have a column with the varchar2 data type (500) next to oltp, I extract the data from this column and loading in another column of tables which has the same varchar2 data type (500)
  
  My problem: I get error with a value too large for column when I am trying to load data in certain folders. (I guess there is a problem of character format, if that's the case how to check characters for the data format)
  
  Help, please

  Do not forget that the 500 in varchar2 (500) specifies the size of the storage. This means that you have 500 bytes of storage.

  Which may depend on your default however nls_length_semantics: your statement is true semantics bytes but neither tank:

  SQL> select name, value  from sys.v_$parameter  where lower (name) like '%length%'
    2  /
  
  NAME                 VALUE
  -------------------- --------------------
  nls_length_semantics BYTE
  
  SQL>
  SQL> create table t (a varchar2 (500))
    2  /
  
  Table created.
  
  SQL>
  SQL> alter session set nls_length_semantics=char
    2  /
  
  Session altered.
  
  SQL>
  SQL> alter table t add b varchar2(500)
    2  /
  
  Table altered.
  
  SQL> desc t
   Name                                      Null?    Type
   ----------------------------------------- -------- ----------------------------
   A                                                  VARCHAR2(500 BYTE)
   B                                                  VARCHAR2(500)
  
  SQL>
  

• Windows will not update the screen resolution and the color depth

  Out of the blue today, my Windows XP installation had its color depth and screen resolution back to the lowest setting and whenever I try to update it refuses to put up-to-date.

  I even try to restart my computer and a bubble appears downstairs offering reset the color depth and resolution to my automatically.  When I click, it appears as if he's trying to return to normal, but again once nothing happens - the colors and the screen resolution is still at the lowest setting.

  Can any ideas on how I fix?

  Hello

  Here are some things to try to fix it.

  Change the screen resolution.

  "How the resolution screen on Windows XP"

  http://pcsupport.about.com/od/Videocards/HT/screenres.htm

  You can also right-click on an empty desktop > properties > settings > it the slider bar allows you to increase the resolution > Apply > OK > agree in the next window, etc.

  If that fixed it, have damaged you graphic drivers.

  Access the site on your computer or the manufacturer of the graphics card > look for a driver download Section > search for your model number and operating system > get graphics / video / Chipset Drivers (depending on how it is formulated) > download and install.

  Change the screen resolution.

  You can also try a system restore before all these problems started:

  "How to use System Restore in Windows XP"

  http://pcsupport.about.com/od/fixtheproblem/HT/system-restore-XP.htm

  See you soon.

• I have netbook Asus eeepc 1005HA with windows 8 instaled as, how can I increase the screen resolution? Thank you in advance.

  I want to enjoy the new interface and not access anything from there. I hope that there is a way.
  Thanks in advance.

  Hi , Sideria,

  Thanks for posting in the Forum the Microsoft community.

  I understand from your description you want to change the resolution of the screen.

  To change the Screen resolution, do the following:

  Step 1: Right click on the desktop and select Screen Resolution screen resolution window.

  Step 2: You can see the current screen resolution then the resolution box. If the resolution is less than 1024 x 768 pixels, you can set a higher resolution, if your PC supports. To change the resolution in progress, click resolution box and select a higher resolution.

  See also:

  Make the text on the screen larger or smaller

  http://Windows.Microsoft.com/en-us/Windows-8/make-text-screen-larger-smaller

  I hope this helps solve your problem. If you continue to face the questions and reply to this thread, we will be happy to help you further.

• Can't change my screen resolution - Windows 8 PRO

  I have computer LAPTOP Compaq Presario A900 in which I installed Windows 8 Pro. After the installation, I'm not able to change my screen resolution. When I right click on the desktop, and then select the screen resolution, it is written in the resolution 1024 x 768 (recommended)box. I can't change the screen resolution. In Device Manager, I tried to update my Generic PnP Monitor driver, it says that your driver is up to date.

  This Device Manager cannot find generic drivers.  I recommend go to the Compaq website and download all the drivers for your model laptop (same drivers you already have, bring here to ensure that you have the latest version of the non-generic), but above all, including the graphics driver.

• "The file is too large for the destination file system? How to move this file to another folder with this error?

  Working with Windows 7. I'm trying to move files to other readers. . What is the work around whan "" the file is too large for the destination file system"is the error messages. Can it be fixed so you can move the files

  Either there is not enough space on the destination or the size of the file is larger than the destination system can accept, for example FAT32 cannot have a file size more than 4 GB.

• I have a windows vista Basic, on a system of e521 Dimansion. The windows display is too large for my monitor of the internet.

  I use a Dell Dimension e521 computer. the program is windows Vista Home Basic. The web page,

  the Internet is too large for my monitor. Y at - it a correction for this. My typing is slow.

  You are welcome.

  I'm glad that you solved the problem.

  See you soon.