Error with API demo/PHP sample number 3

Similar Questions

• Error with groovy expression of sequence number of EO attribute assignment?

  
  Hello world

  My version of Jdeveloper is 11.1.2.3.0.
  Starting from this post: https://tompeez.wordpress.com/category/adf/page/6/
  I found to add a groovy expression for the sequence number to my attribute. I created a single sequence and added that the groovy expression to my attribute but got the error below:

  Utils > < buildFacesMessage > ADF: addition of the following JSF error message: failed to start, bc4j_model_TestEntityObject_Empno_null_gs.groovy: 1: lack of hook closing ' > ' for generic types.
  solution: Please specify the missing support! @ line 1, column 12.
  1 error

  org.codehaus.groovy.control.MultipleCompilationErrorsException: failed to start, bc4j_model_TestEntityObject_Empno_null_gs.groovy: 1: lack of hook closing ' > ' for generic types.
  solution: Please specify the missing support! @ line 1, column 12.
  1 error

  Note: groovy expresion used in my EO attribute is given below:
  (new class < SPAN > 'skimlinks-fidget' = > oracle.jbo.server.SequenceImpl ("SampleSeq", adf.object.getDBTransaction ())) .getSequenceNumber </span >)

  also used:
  (new class < SPAN > 'skimlinks-fidget' = > oracle.jbo.server.SequenceImpl ("SampleSeq", adf.object.getDBTransaction ()) .getSequenceNumber () </span >

  What can be the problem?
  Please give me your valuable contributions...

  
  Thank you.

  Sorry, somehow the code in the blog is messed up. Use

  (new oracle.jbo.server.SequenceImpl ("SampleSeq", adf.object.getDBTransaction ()) .getSequenceNumber)

  Where SampleSeq is the name of the sequence defined in the comic book.

  Timo

• Error-307650 during a sequence in real-time with API LV

  I created a basic real-time sequence that checks the time it takes a signal reach a certain threshold.

  

  On the side of the LV, I use the API to call this sequence. I make sure that all channels and settings are defined as in the examples. However I get 307650 error that says "NEITHER VeriStand: Index was out of range." Must be non-negative and less than the size of the collection.

  ' Parameter name: index.

  Any suggestion to help here? THX. Code is attached.

  There are two problems here:

  1. The Stimulus profile editor is not indicating that there is an error with this sequence, although there is a. Note that the variable InitialTime is used in an expression, but is not declared as a parameter or a local variable.

  2. you get an error at runtime because of it, but it's not terribly useful (index out of range).

  You can fix this by adding a local variable of InitialTime to your sequence. I dropped the CAR 338386 about this bug.

  Once you do this, there is something extra, you will need to set in your VI which runs the sequence so he could get the results of the sequence properly. You use correctly the value of the sequence name to read the back of the sequence Variable. You use the Session name used during the deployment of the sequence. Which does not match the name sequence.

  To get the name of the sequence, use VI to get all the names sequence on your session profile of stimulus to get the array of names for all of the top level of the session sequences, then index on the first point, given that you only use a single sequence. Example below:

  

• Hi, I'm changing payment five days ago mi information (I need to change the credit card number), but something happen and appears an error with this announcement page: "error number: PMT_000008" then... What should I do?

  Hi, I'm changing payment five days ago mi information (I need to change the credit card number), but something happen and appears an error with this announcement page: "error number: PMT_000008" then... What should I do?

  Since this is an open forum, not Adobe support... you must contact Adobe personnel to help

  Chat/phone: Mon - Fri 05:00-19:00 (US Pacific Time)<=== note="" days="" and="">

  Don't forget to stay signed with your Adobe ID before accessing the link below

  Creative cloud support (all creative cloud customer service problems)

  http://helpx.Adobe.com/x-productkb/global/service-CCM.html

• I get this error with my login form, I did, but I'm not sure if this is a problem with my php code or

  I get this error with my login form when I try to log in, but I'm not sure if this is a problem with my php code or my flex code!
  
  ReferenceError: Error #1069: loginsuccess property not found on string and there is no default value.
  CBC::main/checkLogin()
  CBC::main/__login_user_result()
  to flash. events::EventDispatcher / dispatchEv...
  to flash. events::EventDispatcher / dispatchEv...
  to HTTPOperation / http://www.Adobe.com/2006/Flex/MX/internal:dispatchRpcEvent ()
  to mx.rpc::AbstractInvoker / http://www.Adobe.com/2006/Flex/MX/internal:resultHandler ()
  at mx.rpc::Responder/result()
  at mx.rpc::AsyncRequest/acknowledge()
  to the DirectHTTPMessageResponder/completeHandl...
  to flash. events::EventDispatcher / dispatchEv...
  to flash. events::EventDispatcher / dispatchEv...
  at flash.net::URLLoader/onComplete()
  
  
  my php code is:
  
  [php] <? PHP
  
  define ("DATABASE_SERVER", "localhost");
  
  define ('DATABASE_USERNAME","f4r");
  
  define ('DATABASE_PASSWORD', 'cool23');
  
  define ('database_name', 'bignixs1');
  
  connect to the database
  
  $mysql = mysql_connect (DATABASE_SERVER, DATABASE_USERNAME, DATABASE_PASSWORD) or die (mysql_error ());
  
  Select the database
  
  @mysql_select_db (DATABASE_NAME);
  
  re-branded the data passed from Flex to variables
  
  $username = mysql_real_escape_string ($_POST ["usernam...)
  
  $password = mysql_real_escape_string ($_POST ["passwor...)
  
  Ask the database to see if the combination of username/password given name is valid.
  
  $query = "SELECT * from users WHERE username = 'username' AND password = 'password" ";
  
  $result = mysql_fetch_array (mysql_query ($query));
  
  start generating XML
  
  $output = "< loginsuccess > ';
  
  If the query returned true, exit < loginsuccess > Yes < / loginsuccess > other output < loginsuccess > not < / loginsuccess >
  
  if(!$result)
  
  {
  
  $output. = « no » ;
  
  } else {}
  
  $output. = "yes";
  
  }
  
  $output. = "< / loginsuccess > ';
  
  all the XML for output
  
  print ($output);
  
  ? > [/php]

  $query = "SELECT * from users WHERE username = 'username' AND password = 'password" ";

  should be

  $query = "SELECT * FROM users WHERE username = '$username' AND password =  '$password'";
  

  example of a system of working with the correct connection code flex & php to ensure:

  http://www.mattlefevre.com/viewExample.php?tut=flexPHP&proj=simple%20Login%20Application

• Error Invalid API Key in Ecosign API

  I use the code example SOAP (developer kit) given by echosign api for testping, but it will always show invalid api key error while I am running to the terminal. Please give the solution as soon as possible, and I'm not able to get the solution of google also.

  It's my API key:

  Secret of customer:

  6IaJHev8N48JbsZcM4Itggzt0pAHF0iS

  I tried with this comment in a terminal:

  PHP demo.php https://secure.echosign.com/services/EchoSignDocumentService20?WSDL test 6IaJHev8N48JbsZcM4Itggzt0pAHF0iS

  It's the demo.php file:

  <? PHP

  get feedback

  array_shift($_SERVER['argv']);

  $Url = array_shift($_SERVER['argv']);

  $ApiKey = array_shift($_SERVER['argv']);

  $cmd = array_shift($_SERVER['argv']);

  $params = $_SERVER ['argv'];

  If (! $cmd) print_usage();

  $S = new SOAPClient ($Url);

  call_user_func ("cmd_$ cmd", $params);

  function cmd_test() {}

  Global $Url, $ApiKey, $S;

  print 'Testing connectivity...\n base;

  $r = $S-> testPing (array ('apiKey' = > $ApiKey));

  Print "Message from the server: {$r-> documentKey-> message} \n";

  Print "file transfer...\n controls ';

  $text = file_get_contents('.. / test.pdf');

  $r = $S-> testEchoFile (array ('apiKey' = > $ApiKey, 'file' = > base64_encode ($text)))-> outFile;

  If (base64_decode ($r) = $text) {}

  Print "Woohoo!" Everything seems to work. \n » ;

  }

  else {}

  Die ("ERROR: some kind of problem with the transfer of files, it seems.") \n") ;

  }

  }

  function cmd_send() {}

  Global $Url, $ApiKey, $S;

  list ($filename, $recipient) = reset (func_get_args ());

  $r = $S-> sendDocument (array)

  'apiKey' = > $ApiKey,

  'documentCreationInfo' = > array)

  'fileInfos' = > array)

  'FileInfo' = > array)

  "file" = > PHP ($filename).

  'Filename' = > $filename,

  ),

  ),

  'message' = > "It's pure."

  "name' = > ' Test SOAP - Lite: $filename."

  'signatureFlow' = > 'SENDER_SIGNATURE_NOT_REQUIRED ',.

  'signatureType' = > "ESIGN"

  'OT' = > array ($recipient).

  ),

  )

  );

  Print "key Document is: {$r-> documentKeys-> DocumentKey-> documentKey} \n";

  }

  function cmd_info() {}

  Global $Url, $ApiKey, $S;

  List ($doc_key) = reset (func_get_args ());

  $r = $S-> getDocumentInfo (array ('apiKey' = > $ApiKey, 'documentKey' = > $doc_key))-> documentInfo.

  Print "Document has the status: {$r-> status} \n";

  Print "Document History: ';"

  foreach ($r-> events-> DocumentHistoryEvent as $_) {}

  $keytext =

  $_-> documentVersionKey

  ? "(versionKey: {$_-> documentVersionKey})" "

  : '';

  Print "{$_-> description} on {$_-> date} $keytext\n;

  }

  print ' last versionKey: {$r-> latestDocumentKey} \n ";

  }

  function cmd_latest() {}

  Global $Url, $ApiKey, $S;

  list ($doc_key, $filename) = reset (func_get_args ());

  $r = $S-> getLatestDocument (array ('apiKey' = > $ApiKey, 'documentKey' = > $doc_key))-> pdf.

  $r = base64_decode ($r);

  file_put_contents ($filename, $r);

  }

  function print_usage() {}

  Die (< < < __USAGE__)

  Use:

  Demo.php < URL > < API key > < service > [parameters]

  When the function is one of:

  test

  Send < Filename > < recipient_email >

  Info < documentKey >

  later < documentKey > < file name >

  test runs basic tests to ensure that you can communicate with the web service

  Send will create a new agreement in EchoSign system and returns a documentKey

  Info returns the current state and all the events of history for a given documentKey

  later saves the last version of the document in PDF format under the given file name

  __USAGE__

  );

  }

  --------------------------  End of file ---------------------------------------------------------------

  Hello Sathishk87537414,

  According to the mentioned scenario, I recommend you to use the key to integration as the API keys are now obsolete. You can generate the key to integration by going to the account-> Adobe DC esign API and click key to integration.

  In addition, the ID of Client secrecy isn't the API key and this is the reason why you have encountered an error.

  -Usman

• Uploading images using the REST API from PHP

  Does anyone at - he had success with the download of the images through the Eloqua Rest API using PHP?

  I have the final point, but I can't understand what kind of information needs to go the variable $data.

  That's what I currently have:

  <? PHP

  ini_set ("display_errors", 1);

  include("..) /.. ("/ eloquaRequest.php");

  $eloquaRequest = new EloquaRequest ('Instancename', 'username', 'password', 'https://secure.eloqua.com/API/REST/1.0');

  $data = new stdClass();

  $data-> image = file_get_contents("./easy.jpg");

  $data-> name = 'this is a file name ";

  $data-> filename = "luke.jpg";

  $data-> contentType = "image/jpeg";

  $response = $eloquaRequest-> message (' assets/image/content', $data);

  var_dump ($Response);

  The error I get is the following, but I think that it is a standard response, if your image does not go through correctly:

  Array (1) {[0] = > object (stdClass) #3 (2) {["type"] = > string(9) "FileError" ["requirement"] = > object (stdClass) #4 (3) {["type"] = > string (15) "SizeRequirement" ["maxSize"] = > int (52428800) ["minSize'] = > int (1)}}}

  Thank you

  Hi Phil,

  I had to find that it all the time, it took me several hours. I hope that it allows you to save a headache.

  Eloqua is very strict in dealing with the content-type header; See the comment here for a little explanation; REST API - download Images

  So what you need to do in PHP, is to build the query string for the image of yourself. You can do as follows (to adapt to your needs, not yet tested);

  <>

  [...]

  $img_path = '. / easy.jpg';

  $img_info = getimagesize ($img_path);

  $img_real = realpath ($img_path);

  $data = "-ELOQUA_BOUNDARY\r\n".

  ' Content-Disposition: form-data; name =-"Filedata\"; filename =------"".baseName ($img_real). » \"\r\n ».

  "Content-Type: '. '" $img_info ['mime']. "" \r\n ".

  "\r\n".

  file_get_contents() ($img_real). "" \r\n ".

  ' - ELOQUA_BOUNDARY - ';

  $headers = array ("Content-Length:".strlen ($data),"Content-Type: multipart/form-data;") Boundary = ELOQUA_BOUNDARY");

  $response = $eloquaRequest-> post (' assets/image/content', $data, $headers);

  ?>

  I have also adapted/reconstructed library Eloqua PHP in order to support the "BOLD" part. You must change the executeRequest function and add something like this to support change the request headers;

  curl_setopt ($this-> ch, CURLOPT_HTTPHEADER, $headers);

• libphp7.so error with httpd.2.4.18 - symbol not found: __cg_jpeg_resync_to_restart

  I am creating a web development environment that has the same platform of LAMP as my production server to minimize the conflicts of the possibility.  The production server has been implemented with Apache with PHP 7.0.2 Update 2.4.18, installed and running.

  I have everything installed in/usr/local from sources on the production server (AWS EC2 running Linux).  I'm trying to repeat the process on the Macbook Pro under OS X 10.11.3.  So far, I got no problem with compiling, installing and loading of the mysql servers both httpd.

  I am able to compile PHP7 without errors.  I installed FreeType 2.6.2 and 9B LibJPEG, libPNG 1.6.21 in/usr/local and compiled PHP with the following configuration:

  . / configure-prefix = / usr/local-with-config-file-path = / usr/local/etc-with-config-file-scan-dir = / usr/local/etc/php-with-apxs2 = / usr/local/bin/apxs-enable-calendar-enable-cli-enable-exif-enable-ftp-enable-pcntl-enable-shmop-enable-sockets-enable-wddx-enable-zip-with-bz2-with-curl--with-gd-with-freetype-dir = / usr/local-with-jpeg-dir = / usr/local-with-png-dir = / usr/local-with-imap-ssl-with-mysqli = mysqlnd--with-mysql-sock=/tmp/mysql.sock - with-openssl-with-openssl-dir = / usr/local-with-pdo-mysql = mysqlnd - with-pear - with-libedit - with-xsl - with-zlib

  PHP compiles and installs without error.  The CLI binary answers without error:

  $ php - v

  PHP 7.0.2 (cli) (built: 6 February 2016 22:02:36) (NTS)

  Copyright (c) 1997-2015 the PHP Group

  Zend Engine v3.0.0, Copyright (c) 1998-2015 Zend Technologies

  However, when I try to load Apache, I get an error:

  $ sudo/usr/local/sbin/apachectl t

  httpd: syntax on line 150 of /usr/local/etc/httpd.conf error: cannot load libexec/libphp7.so into server: dlopen (/ usr/local/libexec/libphp7.so, 10): symbol not found: __cg_jpeg_resync_to_restart\n referenced from: /System/Library/Frameworks/ImageIO.framework/Versions/A/Resources/libTIFF.dylib \n expected: /usr/local/lib/libjpeg.9.dylib\n to /System/Library/Frameworks/ImageIO.framework/Versions/A/Resources/libTIFF.dylib

  Based on the contribution of the research on Google, I modified the file/usr/local/sbin/envvars and /usr/local/sbin/envvars-std.

  Originally:

  If test "x$ DYLD_LIBRARY_PATH"! = « x » ; then

  DYLD_LIBRARY_PATH = "" / usr/local/lib: $DYLD_LIBRARY_PATH ""

  on the other

  DYLD_LIBRARY_PATH = ' / usr/local/lib '.

  FI

  Under the direction of:

  If test "x$ DYLD_LIBRARY_PATH"! = « x » ; then

  DYLD_LIBRARY_PATH = ' / usr/local/lib '.

  on the other

  DYLD_LIBRARY_PATH = ' / usr/local/lib '.

  FI

  Export DYLD_LIBRARY_PATH

  Based on more googling, I ran otools on the binaries to try to ascertain where libTIFF.dylib is referenced.

  $ otool-L /usr/local/libexec/libphp7.so

  /usr/local/libexec/libphp7.so:

  /usr/local/lib/libaprutil-1.0.dylib (compatibility version 6.0.0 latest version 6.4.0)

  /usr/lib/libexpat.1.dylib (compatibility version 7.0.0, latest version 8.0.0)

  /usr/lib/libiconv.2.dylib (compatibility version 7.0.0, latest version 7.0.0)

  /usr/local/lib/libapr-1.0.dylib (compatibility version 6.0.0 latest version 6.2.0)

  /usr/lib/libSystem.B.dylib (version 1.0.0 of compatibility, the current version 1226.10.1)

  /usr/lib/libz.1.dylib (version 1.0.0 compatibility, latest version 1.2.5)

  /usr/lib/libexslt.0.dylib (version 9.0.0 of compatibility, the current version 9.15.0)

  /usr/lib/libresolv.9.dylib (version 1.0.0 compatibility, latest version 1.0.0)

  /usr/lib/libedit.3.dylib (version 2.0.0 compatibility latest version 3.0.0)

  /usr/lib/libncurses.5.4.dylib (compatibility version 5.4.0 latest version 5.4.0)

  /usr/local/lib/libpng16.16.dylib (version compatibility, the current version 38.0.0 38.0.0)

  /usr/local/lib/libjpeg.9.dylib (compatibility version 12.0.0, latest version 12.0.0)

  /usr/lib/libcurl.4.dylib (compatibility version 7.0.0, latest version 8.0.0)

  /usr/lib/libbz2.1.0.dylib (version 1.0.0 compatibility, latest version 1.0.5)

  /usr/lib/libxml2.2.dylib (version 10.0.0 compatibility, the current version 10.9.0)

  / usr/lib/libicucore. A.dylib (version 1.0.0 of compatibility, the current version 55.1.0)

  /usr/local/lib/libfreetype.6.dylib (version compatibility, the current version 19.2.0 19.0.0)

  /usr/lib/libxslt.1.dylib (version 3.0.0 of compatibility, the current version 3.26.0)

  $ otool-L /usr/local/lib/libjpeg.9.dylib

  /usr/local/lib/libjpeg.9.dylib:

  /usr/local/lib/libjpeg.9.dylib (compatibility version 12.0.0, latest version 12.0.0)

  /usr/lib/libSystem.B.dylib (version 1.0.0 of compatibility, the current version 1226.10.1

  I am at a loss.  I don't see how and where libTIFF.dylib system is referenced, and what I can do to fix this so PHP7 compiles purely against the library libjpeg in/usr/local.

  Any help and guidance will be greatly appreciated.

  You will have a much better chance to get this stuff free to work if you are using a build system such as 'MacPorts,' 'HomeBrew', or 'Fink '. You will also have access to mailing lists where you might find others who have solved the same problem you have. There is virtually no chance of finding someone like that here.

• Measurement and Automation does not open and generates the MAXKnownException error with an unknown exception.

  Measurement & Automation does not open and generates the MAXKnownException error with an unknown exception.

  Heres the log

  Context where the exception was taken:
  (No context - the unhandled exception)

  Size version of Base module
  -------------------- -------- -------- ------------------
  NIMax.exe 00400000 0006 has 000 4.6.0.49152
  ntdll.dll 770E0000 00180000 6.1.7601.18247
  00110000-76060000 6.1.7601.18409 Kernel32.dll
  KERNELBASE.dll 74E00000 00047000 6.1.7601.18409
  SYSFER. 74830000 00072000 12.1.1101.401 DLL
  1BFB0000 0001 NiMaxImp.dll B 000 4.6.0.49152
  Shell32.dll 74E50000 00C4A000 6.1.7601.18429
  Msvcrt.dll 76830000 000AC000 7.0.7601.17744
  74 00000 00057000 6.1.7601.17514 SHLWAPI.dll
  76740000 00090000 6.1.7601.18275 Gdi32.dll
  00100000 76480000 6.1.7601.17514 User32.dll
  Advapi32.dll 75DD0000 000 A 0000 6.1.7601.18247
  sechost.dll 76CC0000 00019000 6.1.7600.16385
  000F0000 rpcrt4.dll 76980000 6.1.7601.18205
  SspiCli.dll 74AE0000 00060000 6.1.7601.18443
  CRYPTBASE.dll 74AD0000 0000 C 000 6.1.7600.16385
  LPK.dll 76470000 0000 has 000 6.1.7601.18177
  USP10.dll 768E0000 0009D 000 1.626.7601.18454
  Ole32.dll 75F00000 0015C 000 6.1.7601.17514
  Msvcp90.dll 739F0000 0008E000 9.0.30729.6161
  Msvcr90.dll 73DB0000 000 has 3000 9.0.30729.6161
  74470000 00009000 6.1.7600.16385 VERSION.dll
  IMM32. 00060000 60000 74 6.1.7601.17514 DLL
  000CC000 76BB0000 MSCTF.dll 6.1.7600.16385
  74320000 00021000 6.1.7600.16385 Ntmarta.dll
  Wldap32.dll 00045000 763E0000 6.1.7601.17514
  Uxtheme.dll 6EB20000 00080000 6.1.7600.16385
  NiMaxUI.dll 1C2D0000 00269000 4.6.0.49153
  Msvfw32.dll 6BE30000 00021000 6.1.7601.17514
  73970000 00032000 6.1.7601.17514 WINMM.dll
  Comctl32.dll 73E80000 0019E000 6.10.7601.17514
  Wsock32.dll 73DA0000 00007000 6.1.7600.16385
  74DC0000 00035000 WS2_32.dll 6.1.7601.17514
  NSI.dll 75AA0000 00006000 6.1.7600.16385
  Oleaut32.dll 76580000 0008F000 6.1.7601.17676
  6D8E0000 003 Mfc90u.dll has 1000 9.0.30729.6161
  MSIMG32.dll 6EBA0000 00005000 6.1.7600.16385
  dwmapi.dll 6EB00000 00013000 6.1.7600.16385
  MFC90ENU. DLL 6EAF0000 0000 D 000 9.0.30729.6161
  NiMaxRes.dll 1BFD0000 0007 has 000 4.6.0.49153
  BtMmHook.dll 10000000 00038000 6.4.0.2900
  PSAPI. DLL 76440000 00005000 6.1.7600.16385
  DCIMAN32. DLL 6E1F0000 00006000 6.1.7601.18177
  MXS.dll 1 B 240000 4.6.0.49152 0000F000
  mxsutils.dll 1B4D0000 00041000 4.6.0.49152
  Msvcp71.dll 7C3C0000 0007C 000 7.10.6030.0
  7 360000 00056000 7.10.6030.0 Msvcr71.dll
  mxsout.dll 1 B 400000 00075000 4.6.0.49152
  64600000 00014000 4.257.3.0 nirpc.dll
  Mswsock.dll 73A 90000 0003C 000 6.1.7601.18254
  profapi.dll 76460000 0000B 000 6.1.7600.16385
  mxMax.dll 1BF20000 00086000 4.6.0.49152
  58000000 00240000 6.5.0.3005 AsstntUI.mxx
  MFC80U. DLL 71210000 8.0.50727.6195 0010F000
  MSVCR80.dll 0009B 000 8.0.50727.6195 72E50000
  Comdlg32.dll 20000 75 0007B 000 6.1.7601.17514
  71180000 00087000 8.0.50727.6195 Msvcp80.dll
  ATL80. DLL 6BD70000 0001 B 000 8.0.50727.6195
  MFC80ENU. DLL 730F0000 8.0.50727.6195 0000E000
  59000000 00582000 6.5.0.3005 mxwTask.dll
  00011000 74180000 6.1.7601.17887 Netapi32.dll
  74170000 00009000 6.1.7601.17514 netutils.dll
  74150000 00019000 6.1.7601.17514 srvcli.dll
  wkscli.dll 74140000 6.1.7601.17514 0000F000
  56000000 00148000 6.5.0.3005 mxwRCEng.dll
  mxcal.mXX 1 A 110000 00056000 4.6.0.49152
  mxcat.mXX 1BE20000 000AB000 4.6.0.49152
  nidmfuiu.mXX 04360000 0010D 000 1.11.0.49152
  NIPALU.dll 64000000 00057000 2.1025.3.0
  64500000 00006000 2.1025.3.0 nipalut.dll
  NIPAL32.dll 00007000 1F700000 2.1025.3.0
  SETUPAPI.dll 76240000 0019D 000 6.1.7601.17514
  CFGMGR32.dll 75DA0000 00027000 6.1.7601.17621
  76220000 00012000 6.1.7601.17621 DEVOBJ.dll
  6 280000 00031000 1.9.0.49152 nimdbgu.dll
  6 000000 00017000 1.9.3.49152 niorbu.dll
  nimstsu.dll 6E180000 0001 has 000 1.11.0.49152
  nimhwcfu.dll 6DFD0000 000 B 6000 1.11.0.49152
  6 050000 0001E000 1.9.0.49152 nidimu.dll
  nimxdfu.dll 0003E000 1.10.0.49152 6D0F0000
  nimxpu.dll 6E1B0000 0000 000 1.11.0.49152 B
  Iphlpapi.dll 74280000 0001C 000 6.1.7601.17514
  WINNSI. DLL 74270000 00007000 6.1.7600.16385
  74B 40000 001BD000 11.0.9600.17126 WININET.dll
  76A 70000 API-MS-Win-Downlevel-User32-L1-1-0.dll 00004000 6.2.9200.16492
  770B 0000 API-MS-Win-Downlevel-shlwapi-L1-1-0.dll 00004000 6.2.9200.16492
  75AB0000 API-MS-Win-Downlevel-Version-L1-1-0.dll 00004000 6.2.9200.16492
  76430000 00003000 6.2.9200.16492 API-MS-Win-Downlevel-normaliz-L1-1-0.dll
  normaliz. DLL 76450000 00003000 6.1.7600.16385
  iertutil.dll 75AC0000 00219000 11.0.9600.17126
  76610000 00005000 6.2.9200.16492 API-MS-Win-Downlevel-advapi32-L1-1-0.dll
  76200000 00017000 6.1.7601.17514 USERENV.dll
  nidmxfu.dll 04470000 0049F000 1.12.0.49152
  nimru2u.dll 6EC70000 00044000 2.10.1.49152
  nimmgluu.dll 69830000 0001E000 1.11.0.49152
  nimercu.dll 6DFB0000 00019000 1.11.0.49152
  MFC71. 00106000 140000 7 7.10.6101.0 DLL
  MFC71ENU. 360000 5 0000E000 7.10.3077.0 DLL
  niGPIBui.mxx B 6, 000000 0008E000 2.7.0.49152
  niIVIui.mxx 02CE0000 000D 0000 4.2.0.49152
  niPXIui.mxx A 671 0000 000BC000 2.1280.1.49152
  niRemPXI.mxx 1 A 270000 00057000 4.6.0.49152
  mxRmCfg.dll 1 has 000000 00090000 4.6.0.49152
  niRMui.mxx 1AD70000 000FD000 4.6.0.49152
  NISRLUI.mxx 6B 500000 00061000 3.4.0.49154
  63800000 00010000 2.7.0.49152 NiSpyLog.dll
  niSWui.mxx 1A3B0000 00072000 4.6.0.49152
  niVISAui.mxx 63360000 0017D 000 4.1280.0.49152
  62 30000 0002E000 4.1280.0.49152 niVISAres2.dll
  RICHED32. DLL 40000 00006000 6.1.7601.17514 6FC
  Riched20.dll 61F70000 00076000 5.31.23.1230
  Wshtcpip.dll 73A 80000 00005000 6.1.7600.16385
  nisysapi.dll 68 has 00000-000B 2000 5.5.2.49152
  Dbghelp.dll 70F20000 000EB000 6.1.7601.17514
  -------------------- -------- -------- ------------------

  Application: C:\Program Files (x 86) \National Instruments\MAX\NIMax.exe
  User name: administrator
  OS version: 6.1.7601 (Service Pack 1)
  Exception code: C06D007E
  Exception addr: 74E0C42D

  Sender's address: 74E0C42D
  Function name: RaiseException
  Module name: KERNELBASE
  Parameters: 00000000 00000001 0518FD84 C06D007E
  Source file: (not available)

  Sender's address: 68A3C6F7
  Function name: DllUnregisterServer
  Module name: nisysapi
  Parameters: 00000000 0518FD50 005F59B8 0000001E
  Source file: (not available)

  Sender's address: 68A53D87
  Function name: DllUnregisterServer
  Module name: nisysapi
  Parameters: 00000350 68A791B8 005F59B8 00000000
  Source file: (not available)

  Sender's address: 68A0DC65
  Function name: nisysInitDiagnosticsByValue
  Module name: nisysapi
  Parameters: 68A 01680 00000001 68A93BB8 FFFFFF01
  Source file: (not available)

  Sender's address: 68A0DFC4
  Function name: nisysInitDiagnosticsByValue
  Module name: nisysapi
  Parameters: 005E2C40 00000000 00000001 00000001
  Source file: (not available)

  Sender's address: 68A 01698
  Function name: nisysInitDiagnosticsByValue
  Module name: nisysapi
  Parameters: 005E2C40 00000000 00000001 00000001
  Source file: (not available)

  Sender's address: 1BE27A73
  Function name: mxGetProvider
  Module name: mxcat
  Parameters: 020469F0 02047084 0518FED0 1BE76CBA
  Source file: (not available)

  Sender's address: 1BE30D2E
  Function name: mxGetProvider
  Module name: mxcat
  Parameters: 02029FA8 02047748 0518FF34 1BE21D4C
  Source file: (not available)

  Sender's address: 1BE35780
  Function name: mxGetProvider
  Module name: mxcat
  Parameters: 00000000 00000000 02047818 020469F0
  Source file: (not available)

  Sender's address: 1BE21D4C
  Function name: (not available)
  Module name: mxcat
  Parameters: 02029FA8 1BE6264D 0518FF7C 73DD3433
  Source file: (not available)

  Sender's address: 1BE21CDC
  Function name: (not available)
  Module name: mxcat
  Parameters: 02030018 00000000 00000000 9192C45C
  Source file: (not available)

  Sender's address: 73DD3433
  Function name: endthreadex
  Module name: MSVCR90
  Parameters: 00000000 0518FF94 7607338A 02047818
  Source file: (not available)

  Sender's address: 73DD34C7
  Function name: endthreadex
  Module name: MSVCR90
  Parameters: 02047818 0518FFD4 77119F72 02047818
  Source file: (not available)

  Sender's address: 7607338A
  Function name: BaseThreadInitThunk
  Name of the module: kernel32
  Parameters: 02047818 00000000 00000000 775D5D69
  Source file: (not available)

  Sender's address: 77119F72
  Function name: RtlInitializeExceptionChain
  Name of the module: ntdll
  Parameters: 02047818 00000000 00000000 73DD345E
  Source file: (not available)

  Sender's address: 77119F45
  Function name: RtlInitializeExceptionChain
  Name of the module: ntdll
  Parameters: 02047818 00000000 00000000 73DD345E
  Source file: (not available)

  If I could come with the OS discs for the thing, I think I'd do a new install of Windows 7.

  Mike...

• Unexplained error with custom events

  LabVIEW 8.6.1f1, Win Vista

  I have an error an once-in-a-blue-moon in my program, I need to track down.

  I have it boiled down to a simple test case, where the error occurs more frequently (but still relatively rarely).

  I have a program called MERS, which is separated from my main code HDT.

  TCM can run on a separate machine, but for this test, it is on the same machine, running under the development of LV system.

  This test simply opens a TCP connection to the TCM, calls for a "signature", it receives and stop the connection.

  The part that opens the connection starts also the TCM RECEIVER running, and kill the connection stops this receiver.

  Here's the code for the main event, and you can see that I get an error apparently because I get no response in MS 2000:

  

  ---------

  The code to GET the SIGNATURE of TCM is here: what it does is to send a request for the signature and then waiting for an event SIGNATURE RECEIVED by the RECEIVER, or a timeout 2000 mSec.

  The error that I get (-100005) comes from there.  If the TCM has failed to respond, it would look like this.  Indeed, this is why the timeouot trap is here.

  

  -----------

  However, here is the code of the receiver and the Panel, immediately after a failure.

  It is clear from the TABLE that he received the SIGNATURE of TCM TCM.

  There are NO orders in the table indicates that the receiver was still running for 2000 mSec (4 x 500 mSec) after receipt of the order.

  When it receives a SIGNATURE, the code written will trigger an event.  No errors are reported here.

  

  So what's happening?  It seems that the event should be raised, but it is not received (Event #0 in photo #2 reacts to the event and returns the word signature, without error).

  This happens not all the time - this case is broken loop # 211 - this number is between 20 and 2000.

  With all those open windows in fact do more often: without them always fails, but she performs thousands of do loops.

  So perhaps it is related to the CPU bustle.

  I checked that there is no error with the function SAVE of EVENTS, even when it fails.

  I come back to the fact that the PICTURE in photo #3 says that the signature was received, but it seems that the EVENT did not get generated or received.

  What are the causes that?

  Is it possible that, since the receiver is dynamically loaded and run, that things are not really created and ready when he says they are?

  OK, that seems to have fixed. -He managed 5000 loops, with the windows open and no failure.

  How completely obvious it sounds, when I put it in words:

  Don't ask a question until you are ready to hear the answer.

  The revised registers for events and THEN asks for the signature.

  So, when the answer comes, even if it is immediately, you're ready.

  

  Don't ask a question until you are ready to hear the answer.

  Don't ask a question until you are ready to hear the answer.

  Don't ask a question until you are ready to hear the answer.

  Don't ask a question until you are ready to hear the answer.

  Don't ask a question until you are ready to hear the answer.

  
  

• How reslove an error with the dbms_redefinition.start_redef_table command?

  Command:

  BEGIN

  () DBMS_REDEFINITION.start_redef_table

  uname = > "kiku"

  orig_table = > 'pletest3_pn_kiku_api_db ',.

  int_table = > 'pletest4_pn_kiku_api_db');

  END;

  Error:

  Error report:

  ORA-12008: error path refresh materialized view

  ORA-14400: inserted partition key is not mapped with any partition

  ORA-06512: at "SYS." DBMS_REDEFINITION", line 50

  ORA-06512: at "SYS." DBMS_REDEFINITION", line 1343

  ORA-06512: at line 2

  12008 00000 - "error in the path of refresh materialized view.

  * Cause: Table SNAP$ _ < mview_name > reads lines of sight

  MVIEW$ _ < mview_name >, which is a view of the main table

  (the master can be on a remote site).  Any

  error in this way will cause this error when updating.

  For updates of the Rapids, the table < master_owner >. MLOG$ _ < master >

  is also referenced.

  * Action: Examine the other messages on the stack to find the problem.

  See if SNAP objects $ _ < mview_name >, MVIEW$ _ < mview_name >.

  < mowner >. < master > @ < dblink >, < mowner >. MLOG$ _ < master > @ < dblink >

  There is always.

  How reslove an error with the dbms_redefinition.start_redef_table command?

  As I said before, this may be reproduced if the intermediate table is not created correctly.

  SQL> --My database version.
  SQL> ----------------------
  SQL> SELECT * FROM v$version;
  
  BANNER
  --------------------------------------------------------------------------------
  Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - 64bit Production
  PL/SQL Release 11.2.0.1.0 - Production
  CORE    11.2.0.1.0      Production
  TNS for Linux: Version 11.2.0.1.0 - Production
  NLSRTL Version 11.2.0.1.0 - Production
  
  SQL> ed
  Wrote file afiedt.buf
  
    1  CREATE TABLE not_partitioned_tbl AS
    2*  SELECT object_id,object_name,created,owner FROM all_objects
  SQL> /
  
  Table created.
  
  SQL> ALTER TABLE not_partitioned_tbl ADD CONSTRAINT not_partitioned_tbl_pk PRIMARY KEY (object_id);
  
  Table altered.
  
  SQL> CREATE INDEX npt_created ON not_partitioned_tbl(created);
  
  Index created.
  
  SQL> EXECUTE DBMS_STATS.gather_table_stats('SCOTT','NOT_PARTITIONED_TBL',cascade=>true);
  
  PL/SQL procedure successfully completed.
  

  Now, I create the staging table without MAXPARTITION, so not all "created" dates cannot be mapped.

  SQL> ed
  Wrote file afiedt.buf
  
    1  CREATE TABLE partitioned_tbl (object_id NUMBER, object_name VARCHAR2(30), created DATE, owner VARCHAR2(30))
    2      PARTITION BY RANGE (created)
    3      (PARTITION pt_2005 VALUES LESS THAN (to_date('01/01/2006','dd/mm/rrrr')),
    4       PARTITION pt_2006 VALUES LESS THAN (to_date('01/01/2007','dd/mm/rrrr')),
    5       PARTITION pt_2007 VALUES LESS THAN (to_date('01/01/2008','dd/mm/rrrr'))
    6      --PARTITION pt_rest VALUES LESS THAN (MAXVALUE) -- Maxpartition  is commented out intentionally.
    7*     )
  SQL> /
  
  Table created.
  
  SQL> EXEC DBMS_REDEFINITION.can_redef_table('SCOTT','NOT_PARTITIONED_TBL');
  
  PL/SQL procedure successfully completed.
  
  SQL> conn sys as sysdba
  Enter password:
  Connected.
  SQL> ed
  Wrote file afiedt.buf
  
    1  BEGIN
    2     DBMS_REDEFINITION.start_redef_table('SCOTT','NOT_PARTITIONED_TBL','PARTITIONED_TBL');
    3* END;
  SQL> /
  BEGIN
  *
  ERROR at line 1:
  ORA-12008: error in materialized view refresh path
  ORA-14400: inserted partition key does not map to any partition
  ORA-06512: at "SYS.DBMS_REDEFINITION", line 52
  ORA-06512: at "SYS.DBMS_REDEFINITION", line 1646
  ORA-06512: at line 2
  
  SQL>
  

• Try to install items with purchased 14 box serial number and system does not... What are the next steps?

  Try to install items with purchased 14 box serial number and system does not... What are the next steps?

  Are you sure have a serial number from the inside of the box, or you could have a redemption code?

  Find your http://helpx.adobe.com/x-productkb/global/find-serial-number.html serial No.

  What is the exact error message?

  Redemption Code http://helpx.adobe.com/x-productkb/global/redemption-code-help.html

  - and https://forums.adobe.com/thread/1572504

• Error with incompatible children in all breakpoints

  When I try to download my latest version, Muse force closes and I get an error stating that ' p incompatible a number of children through breakpoints in U61515 text... any comments on how to solve this problem would be VERY APPRECIATED!  Thank you.

  

  I found the problem. It was something wrong with a couple of text boxes. I copy and paste the content into a new text box and it works fine now. It's a big bug tho because the content is exactly the same, just a new text box

• Error offline - we are sorry, but there was a communication error with the server. Please try again and if the problem persists, contact Adobe Techincal Suport...  (INVALID_QUERY: XMLList object)?

  After a number of years of service, my Adobe Premiere CS4 gives me the following error message:

  Error offline - we are sorry, but there was a communication error with the server. Please try again and if the problem persists, contact Adobe Technical Support...  (INVALID_QUERY: XMLList object).

  I use this software on an old Dell desktop computer to two year with many members and drive.  It is a stand-alone application, not connected to a server.

  Anyone have any ideas on how to solve this problem?

  I think it has to do with the central resource is no longer supported.  Everything works OK if you ignore the message?

• I bought a LR 6 update. I received the order number and the serial number by email from Digital River. However when I try to activate the product I get a message error "we cannot validate this serial number.

  I bought a LR 6 update. I received the order number and the serial number by email from Digital River. However when I try to activate the product I get a message error "we cannot validate this serial number.

  Hi avijitm,

  You are using a Mac or Windows computer?

  Make sure there is no hosts blocking Lightroom entry onto the Adobe servers.

  Follow solution 3 referred to in article Solutions to connect, activation and errors in connection with creative cloud and Creative Suite applications

  See Error failed to validate the serial number | CS6

  Let us know if that helps.

  Kind regards

  Assani