Error with DAQmx 200220

Similar Questions

• With a sampling of the data with DAQMX, error-200279 occurs when making 2d array dbl

  Hello

  I did a system of simple analog voltage with DAQMX data acquisition.

  It is made for reading of capacitance, where output capacitance value out of a circuit in the periodic voltage signal.

  What I want is to get data from four capacitors simultaneously through four channels, using samples n n (dbl 2d).

  The structure of my VI is almost similar with examples of continuous sampling of voltage in LabView, with the exception of a few other calculations in the loop.

  And for the synchronization of the trigger, I've corrected the edge of release with the external signal from the capacitance reading circuit.

  Version no. 1 has a channel for data input voltage. Version n ° 2 has four channels for the input data.

  While ver.1 can get accurate reading of four capacitors circuit data each (a single channel at a time),.

  ver.2 acquires four channels of data, with a single thin data channel, all the others were wrong.

  I saw a 200279 error occur in the DAQMX read part 2d dbl, so I tried increasing the buffers by changing the sampling frequency or the number of samples, but it wasn't everything.

  I rose for most of the forums with the 200279 error, but the solution would not work on mine.

  Anyone can find the problem? I will attach my screws it may include a bit of Korean language, but most of them are in English, shouldn't be too hard to recognize. Sorry for the inconvenience.

  Oh I forgot, my DAQ is NI USB-6259, and it works in Win XP sp3 and LabView 8.6.

  Thank you.

  Hello Azurenight,

  The 6259 is a DAQ card of the M Series Multiplexed, which means that it is not possible to sample each signal at the same instant, rather the channels are all sent through the ADC even and must be sampled in order. More information on this can be found here:

  LabVIEW Help: Multiplexing compared with simultaneous sampling

  http://zone.NI.com/reference/en-XX/help/370466W-01/mxcncpts/multisimulsamp/

  It may still be possible to get the data you need with the card you have - could you give more information about the maximum eligible period between samples on different channels?

  If you require * real * simultaneous sampling, you will probably need different hardware.

  Kind regards

• Error-50352 DAQmx: How can I determine the maximum size of the buffer?

  I use a card PCI-6259 with DAQmx (version 9.0.2) library and I get the error "-50352: memory cannot be allocated" whenever I try to make my record too long. Here are a few terms that I found:

  1 channel of AI, 1Msample/s: 7.71 sec max

  1 channel AO, 1Msample/s: 7.71 sec max

  1 channel of AI, 500ksample/s: 15,4 sec max

  2 channels of AI, 500ksample/s: 7.71 sec max

  1 HAVE, AO, 1Msample/s 1-channel: 5.6 sec max

  IF I can't acquire more 7.71 Msamples in a single task, be it in most cases, or AO. When you mix tasks HAVE and AO, this limit seems to be decreasing. This happens with a freshly started application, so I don't think that it is a question of compensation task.

  What is a physical boundary with the device? (And if so, how can I determine this limit?)

  My impression is that the device uses DMA to transfer samples to the system memory, which there are plenty - I can easily allocate more than 400 MB of contiguous memory in the same application.

  Hi Luke,.

  The amount of RAM your system installed?

  What operating system do you use? If it is a 32-bit operating system, using 3 GB or increaseuserva? These parameters have a compromise: they reduce the size of the kernel virtual address space. This increases the probability of DAQmx will succeed to allocate memory but do not reach the mapping in the kernel virtual address space.

  Your system has all the devices with very large memory mapped I/O beaches, such as a video card with a large amount of memory on-board? On a 32-bit operating system, this can reduce the size of the virtual address space of the nucleus by a significant amount.

  Brad

• How to fix the error with the code: 0xe7210001 failed to load powrprof, object: cls

  Hello

  Dose anyone know how to fix the error with the code: 0xe7210001, message: unable to load powrprof, object: CLSD-no-it is found;
  OR: Fingerprintsoftware OR error: replicas THotkey.exe message window and the computer freezes

  Maleware scanned and virus, also in safe mode, found no infection, reinstalled driver fingerprint, but nothing has changed.

  grateful for the help!

  Hello

  > message: unable to load powrprof, object: CLSD-no-it is found;
  In my view, this would mean that there is a problem with Toshiba Power Saver
  What laptop Toshiba, you have exactly?

  Maybe reinstall Power Saver could help. You can find it on the official website of Toshiba.

• How can I know if Migration Wizard works... I have the gray wheel on the new mac and it is after a msg error saying there was an error with iCloud (in red)

  How can I know if Migration Wizard works... I have the gray wheel on the new mac and it's after a msg error saying there was an error with iCloud (in red). What is happening with a MacBook Pro refurbished, I just got today. Thanks for any help.

  The guarantee gives the right to the free phone support for the first 90 days of ownership.

• Satellite L350-214 - error with the software Reeltime

  Hello

  I have a Satellite L350-214 with Windows 7 Pro and have encountered an error with the software Reeltime, I uninstalled and reinstalled and still get the error below. Any help or assistance would be great

  Tony Miller

  Log name: Application
  Source: Windows Error Reporting
  Date: 2010-11-30 12:27:58
  Event ID: 1001
  Task category: no
  Level: Information
  Keywords: Classic
  User: n/a
  Computer: Tony-TOSH
  Description:
  Fault bucket 1223018385, type 5
  Event name: CLR20r3
  Answer: No available
  Cabin ID: 0
  Signature of the problem:
  P1: tosreeltime.exe
  P2: 1.0.0.0
  P3: 4a769d0e
  P4: WindowsBase
  P5: 3.0.0.0
  P6: 4b5950b7
  P7: a86
  P8: 18
  P9: System.InvalidOperationException
  P10:
  Attached files:
  C:\Users\Tony\AppData\Local\Temp\WER7C9E.tmp.WERIn ternalMetadata.xml
  These files are available here:
  C:\Users\Tony\AppData\Local\Microsoft\Windows\WER\ ReportArchive\AppCrash_tosreeltime.exe_25c5a6496c7 ad44943ce88637e3389e8a80bd45_07f0c745
  Symbol of the analysis:
  Recheck for solution: 0
  Report ID: d5b71327-fc74-11df-a596-00266c333aed
  State: 0
  The event XML:
  
  
  
  1001
  4
  0
  0 x 80000000000000
  
  37886
  Application
  Tony-TOSH
  
  
  
  1223018385
  5
  CLR20r3
  Not available
  0
  tosreeltime.exe
  1.0.0.0
  4a769d0e
  WindowsBase
  3.0.0.0
  4b5950b7
  A86
  18
  System.InvalidOperationException
  
  
  
  C:\Users\Tony\AppData\Local\Temp\WER7C9E.tmp.WERIn ternalMetadata.xml
  C:\Users\Tony\AppData\Local\Microsoft\Window s\WER\ReportArchive\AppCrash_tosreeltime.exe_25c5a 6496c7ad44943ce88637e3389e8a80bd45_07f0c745
  
  
  0
  d5b71327-fc74-11df-A596-00266c333aed
  0
  
  
  My system specs

  Hey,.

  If you get this error Reeltime, you should try Ccleaner. There may be a registry problem and CCleaner might solve this problem. This great freeware and easy tool which you can download here:
  http://www.Piriform.com/

  Check this box!

• Timing embedded with Daqmx on PCI-6132

  Hello

  My colleague and I are trying to make a program Labview which starts a timer when the first trigger (sensor) is struck and stop the timer when the second trigger (sensor) is reached in 2012. We currently have a program for her, but this program was not sufficiently precise. Also the current program is using the DAQ assistant, but we would like to replace with daqmx triggering. We have also tried to use the OnboardClock on the PCI-6132, but still could not do the work programme.

  Is there anyone who knows how to do this and could explain it?

  (In the attachment is the current program)

  Thanks in advance,

  Tommy van Geest

  Hello Tommy.

  You can share your current code?

• Is it time stamp with daqmx read

  Hi all

  Simple question.  I have currently not creating a task or starting a task, I simply create a channel and reading that chanel.

  It is...  Why I don't get a timestamp when you do and do I create a task to get one of this?

  There is a timestamp when you use the DAQ Assistant or when you choose to return a data type of waveform with DAQmx Read.

  You can't do a reading without a blemish. You don't have to create the task in MAX, however.

• Multitask with daqmx

  Hello

  I am currently working on a Senior design project where I have to measure rpm, torque, pressure and temperature.  I use strain gauges, pressure sensor and a Hall effect sensor, thermocouples for these readings.  A myDAQ collects readings rpm and pressure while a cDAQ collects couple and readings of the temperature with NI 9211 and NI 9237 modules.  I have created LabVIEW screws for each sensor and they work.  The problem I have is when I try to create a VI with DAQmx who reads all the values of these sensors simultaneously.  The VI I joined randomly displays one of the measures while other measures remain empty.  How can I change my VI so I can show all my readings at the same time?

  Yes.  Create multiple tasks, where all the strings that are common to a specific device are grouped in the same task.  Then go and run these tasks in parallel.  Do you need a precise synchronization between the tracks in the different devices?  If this isn't the case, then the method should work perfectly.  If you need a precise timing, things would get more complicated, but might not be impossible.

• time of release with daqmx

  Hello

  How can I set the time of liberation with DAQmx?

  In general, with a single DAQ hardware, the two signals are connected at the same time and the acquisition time is a function of the sampling frequency and number of samples read. For example, with a sampling rate of 1000 samples/s and 50 samples, the acquisition will be 50 msec. You then get a returned array if you wanted to watch a single signal by iteration of the while loop, it is simply a matter of indexing the specific channel to the table. You must set the mode of continuous sampling to avoid gaps and precise timing. Using two separate tasks and switching back and forth would add a lot of overhead to close/create tasks and you have little control over this period.

• Measurement and Automation does not open and generates the MAXKnownException error with an unknown exception.

  Measurement & Automation does not open and generates the MAXKnownException error with an unknown exception.

  Heres the log

  Context where the exception was taken:
  (No context - the unhandled exception)

  Size version of Base module
  -------------------- -------- -------- ------------------
  NIMax.exe 00400000 0006 has 000 4.6.0.49152
  ntdll.dll 770E0000 00180000 6.1.7601.18247
  00110000-76060000 6.1.7601.18409 Kernel32.dll
  KERNELBASE.dll 74E00000 00047000 6.1.7601.18409
  SYSFER. 74830000 00072000 12.1.1101.401 DLL
  1BFB0000 0001 NiMaxImp.dll B 000 4.6.0.49152
  Shell32.dll 74E50000 00C4A000 6.1.7601.18429
  Msvcrt.dll 76830000 000AC000 7.0.7601.17744
  74 00000 00057000 6.1.7601.17514 SHLWAPI.dll
  76740000 00090000 6.1.7601.18275 Gdi32.dll
  00100000 76480000 6.1.7601.17514 User32.dll
  Advapi32.dll 75DD0000 000 A 0000 6.1.7601.18247
  sechost.dll 76CC0000 00019000 6.1.7600.16385
  000F0000 rpcrt4.dll 76980000 6.1.7601.18205
  SspiCli.dll 74AE0000 00060000 6.1.7601.18443
  CRYPTBASE.dll 74AD0000 0000 C 000 6.1.7600.16385
  LPK.dll 76470000 0000 has 000 6.1.7601.18177
  USP10.dll 768E0000 0009D 000 1.626.7601.18454
  Ole32.dll 75F00000 0015C 000 6.1.7601.17514
  Msvcp90.dll 739F0000 0008E000 9.0.30729.6161
  Msvcr90.dll 73DB0000 000 has 3000 9.0.30729.6161
  74470000 00009000 6.1.7600.16385 VERSION.dll
  IMM32. 00060000 60000 74 6.1.7601.17514 DLL
  000CC000 76BB0000 MSCTF.dll 6.1.7600.16385
  74320000 00021000 6.1.7600.16385 Ntmarta.dll
  Wldap32.dll 00045000 763E0000 6.1.7601.17514
  Uxtheme.dll 6EB20000 00080000 6.1.7600.16385
  NiMaxUI.dll 1C2D0000 00269000 4.6.0.49153
  Msvfw32.dll 6BE30000 00021000 6.1.7601.17514
  73970000 00032000 6.1.7601.17514 WINMM.dll
  Comctl32.dll 73E80000 0019E000 6.10.7601.17514
  Wsock32.dll 73DA0000 00007000 6.1.7600.16385
  74DC0000 00035000 WS2_32.dll 6.1.7601.17514
  NSI.dll 75AA0000 00006000 6.1.7600.16385
  Oleaut32.dll 76580000 0008F000 6.1.7601.17676
  6D8E0000 003 Mfc90u.dll has 1000 9.0.30729.6161
  MSIMG32.dll 6EBA0000 00005000 6.1.7600.16385
  dwmapi.dll 6EB00000 00013000 6.1.7600.16385
  MFC90ENU. DLL 6EAF0000 0000 D 000 9.0.30729.6161
  NiMaxRes.dll 1BFD0000 0007 has 000 4.6.0.49153
  BtMmHook.dll 10000000 00038000 6.4.0.2900
  PSAPI. DLL 76440000 00005000 6.1.7600.16385
  DCIMAN32. DLL 6E1F0000 00006000 6.1.7601.18177
  MXS.dll 1 B 240000 4.6.0.49152 0000F000
  mxsutils.dll 1B4D0000 00041000 4.6.0.49152
  Msvcp71.dll 7C3C0000 0007C 000 7.10.6030.0
  7 360000 00056000 7.10.6030.0 Msvcr71.dll
  mxsout.dll 1 B 400000 00075000 4.6.0.49152
  64600000 00014000 4.257.3.0 nirpc.dll
  Mswsock.dll 73A 90000 0003C 000 6.1.7601.18254
  profapi.dll 76460000 0000B 000 6.1.7600.16385
  mxMax.dll 1BF20000 00086000 4.6.0.49152
  58000000 00240000 6.5.0.3005 AsstntUI.mxx
  MFC80U. DLL 71210000 8.0.50727.6195 0010F000
  MSVCR80.dll 0009B 000 8.0.50727.6195 72E50000
  Comdlg32.dll 20000 75 0007B 000 6.1.7601.17514
  71180000 00087000 8.0.50727.6195 Msvcp80.dll
  ATL80. DLL 6BD70000 0001 B 000 8.0.50727.6195
  MFC80ENU. DLL 730F0000 8.0.50727.6195 0000E000
  59000000 00582000 6.5.0.3005 mxwTask.dll
  00011000 74180000 6.1.7601.17887 Netapi32.dll
  74170000 00009000 6.1.7601.17514 netutils.dll
  74150000 00019000 6.1.7601.17514 srvcli.dll
  wkscli.dll 74140000 6.1.7601.17514 0000F000
  56000000 00148000 6.5.0.3005 mxwRCEng.dll
  mxcal.mXX 1 A 110000 00056000 4.6.0.49152
  mxcat.mXX 1BE20000 000AB000 4.6.0.49152
  nidmfuiu.mXX 04360000 0010D 000 1.11.0.49152
  NIPALU.dll 64000000 00057000 2.1025.3.0
  64500000 00006000 2.1025.3.0 nipalut.dll
  NIPAL32.dll 00007000 1F700000 2.1025.3.0
  SETUPAPI.dll 76240000 0019D 000 6.1.7601.17514
  CFGMGR32.dll 75DA0000 00027000 6.1.7601.17621
  76220000 00012000 6.1.7601.17621 DEVOBJ.dll
  6 280000 00031000 1.9.0.49152 nimdbgu.dll
  6 000000 00017000 1.9.3.49152 niorbu.dll
  nimstsu.dll 6E180000 0001 has 000 1.11.0.49152
  nimhwcfu.dll 6DFD0000 000 B 6000 1.11.0.49152
  6 050000 0001E000 1.9.0.49152 nidimu.dll
  nimxdfu.dll 0003E000 1.10.0.49152 6D0F0000
  nimxpu.dll 6E1B0000 0000 000 1.11.0.49152 B
  Iphlpapi.dll 74280000 0001C 000 6.1.7601.17514
  WINNSI. DLL 74270000 00007000 6.1.7600.16385
  74B 40000 001BD000 11.0.9600.17126 WININET.dll
  76A 70000 API-MS-Win-Downlevel-User32-L1-1-0.dll 00004000 6.2.9200.16492
  770B 0000 API-MS-Win-Downlevel-shlwapi-L1-1-0.dll 00004000 6.2.9200.16492
  75AB0000 API-MS-Win-Downlevel-Version-L1-1-0.dll 00004000 6.2.9200.16492
  76430000 00003000 6.2.9200.16492 API-MS-Win-Downlevel-normaliz-L1-1-0.dll
  normaliz. DLL 76450000 00003000 6.1.7600.16385
  iertutil.dll 75AC0000 00219000 11.0.9600.17126
  76610000 00005000 6.2.9200.16492 API-MS-Win-Downlevel-advapi32-L1-1-0.dll
  76200000 00017000 6.1.7601.17514 USERENV.dll
  nidmxfu.dll 04470000 0049F000 1.12.0.49152
  nimru2u.dll 6EC70000 00044000 2.10.1.49152
  nimmgluu.dll 69830000 0001E000 1.11.0.49152
  nimercu.dll 6DFB0000 00019000 1.11.0.49152
  MFC71. 00106000 140000 7 7.10.6101.0 DLL
  MFC71ENU. 360000 5 0000E000 7.10.3077.0 DLL
  niGPIBui.mxx B 6, 000000 0008E000 2.7.0.49152
  niIVIui.mxx 02CE0000 000D 0000 4.2.0.49152
  niPXIui.mxx A 671 0000 000BC000 2.1280.1.49152
  niRemPXI.mxx 1 A 270000 00057000 4.6.0.49152
  mxRmCfg.dll 1 has 000000 00090000 4.6.0.49152
  niRMui.mxx 1AD70000 000FD000 4.6.0.49152
  NISRLUI.mxx 6B 500000 00061000 3.4.0.49154
  63800000 00010000 2.7.0.49152 NiSpyLog.dll
  niSWui.mxx 1A3B0000 00072000 4.6.0.49152
  niVISAui.mxx 63360000 0017D 000 4.1280.0.49152
  62 30000 0002E000 4.1280.0.49152 niVISAres2.dll
  RICHED32. DLL 40000 00006000 6.1.7601.17514 6FC
  Riched20.dll 61F70000 00076000 5.31.23.1230
  Wshtcpip.dll 73A 80000 00005000 6.1.7600.16385
  nisysapi.dll 68 has 00000-000B 2000 5.5.2.49152
  Dbghelp.dll 70F20000 000EB000 6.1.7601.17514
  -------------------- -------- -------- ------------------

  Application: C:\Program Files (x 86) \National Instruments\MAX\NIMax.exe
  User name: administrator
  OS version: 6.1.7601 (Service Pack 1)
  Exception code: C06D007E
  Exception addr: 74E0C42D

  Sender's address: 74E0C42D
  Function name: RaiseException
  Module name: KERNELBASE
  Parameters: 00000000 00000001 0518FD84 C06D007E
  Source file: (not available)

  Sender's address: 68A3C6F7
  Function name: DllUnregisterServer
  Module name: nisysapi
  Parameters: 00000000 0518FD50 005F59B8 0000001E
  Source file: (not available)

  Sender's address: 68A53D87
  Function name: DllUnregisterServer
  Module name: nisysapi
  Parameters: 00000350 68A791B8 005F59B8 00000000
  Source file: (not available)

  Sender's address: 68A0DC65
  Function name: nisysInitDiagnosticsByValue
  Module name: nisysapi
  Parameters: 68A 01680 00000001 68A93BB8 FFFFFF01
  Source file: (not available)

  Sender's address: 68A0DFC4
  Function name: nisysInitDiagnosticsByValue
  Module name: nisysapi
  Parameters: 005E2C40 00000000 00000001 00000001
  Source file: (not available)

  Sender's address: 68A 01698
  Function name: nisysInitDiagnosticsByValue
  Module name: nisysapi
  Parameters: 005E2C40 00000000 00000001 00000001
  Source file: (not available)

  Sender's address: 1BE27A73
  Function name: mxGetProvider
  Module name: mxcat
  Parameters: 020469F0 02047084 0518FED0 1BE76CBA
  Source file: (not available)

  Sender's address: 1BE30D2E
  Function name: mxGetProvider
  Module name: mxcat
  Parameters: 02029FA8 02047748 0518FF34 1BE21D4C
  Source file: (not available)

  Sender's address: 1BE35780
  Function name: mxGetProvider
  Module name: mxcat
  Parameters: 00000000 00000000 02047818 020469F0
  Source file: (not available)

  Sender's address: 1BE21D4C
  Function name: (not available)
  Module name: mxcat
  Parameters: 02029FA8 1BE6264D 0518FF7C 73DD3433
  Source file: (not available)

  Sender's address: 1BE21CDC
  Function name: (not available)
  Module name: mxcat
  Parameters: 02030018 00000000 00000000 9192C45C
  Source file: (not available)

  Sender's address: 73DD3433
  Function name: endthreadex
  Module name: MSVCR90
  Parameters: 00000000 0518FF94 7607338A 02047818
  Source file: (not available)

  Sender's address: 73DD34C7
  Function name: endthreadex
  Module name: MSVCR90
  Parameters: 02047818 0518FFD4 77119F72 02047818
  Source file: (not available)

  Sender's address: 7607338A
  Function name: BaseThreadInitThunk
  Name of the module: kernel32
  Parameters: 02047818 00000000 00000000 775D5D69
  Source file: (not available)

  Sender's address: 77119F72
  Function name: RtlInitializeExceptionChain
  Name of the module: ntdll
  Parameters: 02047818 00000000 00000000 73DD345E
  Source file: (not available)

  Sender's address: 77119F45
  Function name: RtlInitializeExceptionChain
  Name of the module: ntdll
  Parameters: 02047818 00000000 00000000 73DD345E
  Source file: (not available)

  If I could come with the OS discs for the thing, I think I'd do a new install of Windows 7.

  Mike...

• 2009 with DAQmx Installer

  We distributed an integrated application that uses DAQmx 8.x and LabVIEW 8.6 for several years.  I'll call the application MyApp 2.8.  We are working on a new version that uses LV 2009 and DAQmx 9.x, which we will call 3.5 MyApp.  When build us and deploy a Setup program for MyApp 3.5, then try to use it on a computer that already has 2.8 installed MyApp, the installer complains about dependencies and said that the two DAQmx 8.x and MyApp 2.8 must be uninstalled first.  I spoke NOR cela briefly and told me that DAQmx 9 was a pretty radical overhaul that required this change.

  It's annoying and slow for us, but almost untenable for our customers.  First of all, MyApp MyApp 3.5 and 2.8 are compatible, and we prefer to leave MyApp 2.8 installed as a backup as people get used to 3.5.  If the customer needs:
  Uninstall MyApp 2.8

  Uninstall DAQmx 8.9

  Install MyApp 3.5 with DAQmx 9.0

  Reinstall 2.8 MyApp (as if they can still find the disc!)

  Far too many steps and complications.  In addition, it is not really necessary.  If the runtime for 2009 is already installed on the computer (for some reason any), you can simply copy the MyApp 3.5 on the computer and it will run with DAQmx 8.9.  But this only postpones the problem, because at some point the customer will upgrade once again, and we will have forgotten that they were installed with a workaround, and...

  The really frustrating part is setup for MyApp 3.5 refuses to install until MyApp 2.8 is uninstalled.   While we have proven that MyApp 2.8 will work very well with DAQmx 9.0.

  Is anyone else noticing this problem?  Has anyone found any better workaround?  Is the same problem when we jumped 2009 and returned with 2010 and the last DAQmx?

  Thank you

  DaveT

  DaveT,

  You're right - for this aspect of the problem - my proposed solution won't help. At the price of a larger Setup program, including the full version of DAQmx probably will give the upgrade experience you want. If the web download size is a concern, perhaps you could provide two builds of your product - with the acquisition of complete data (for those of you who have your old product) and with smaller data acquisition (for those who do a clean install)?

  In addition, certain registry keys to remove the dependency I guess hacking is sort of an option, but it probably isn't the type of solution you are looking for. (We are currently researching the addition of some extra features in the uninstall program OR allow without taking account of certain dependencies, but nothing is currently available).

  Kind regards

  -WesW

• my windows server keeps flashing upward with errors with security

  my windows server keeps flashing upward with errors with security

  I suggest that you reinstall the operating system as there is a Setup error.

• Unexplained error with custom events

  LabVIEW 8.6.1f1, Win Vista

  I have an error an once-in-a-blue-moon in my program, I need to track down.

  I have it boiled down to a simple test case, where the error occurs more frequently (but still relatively rarely).

  I have a program called MERS, which is separated from my main code HDT.

  TCM can run on a separate machine, but for this test, it is on the same machine, running under the development of LV system.

  This test simply opens a TCP connection to the TCM, calls for a "signature", it receives and stop the connection.

  The part that opens the connection starts also the TCM RECEIVER running, and kill the connection stops this receiver.

  Here's the code for the main event, and you can see that I get an error apparently because I get no response in MS 2000:

  

  ---------

  The code to GET the SIGNATURE of TCM is here: what it does is to send a request for the signature and then waiting for an event SIGNATURE RECEIVED by the RECEIVER, or a timeout 2000 mSec.

  The error that I get (-100005) comes from there.  If the TCM has failed to respond, it would look like this.  Indeed, this is why the timeouot trap is here.

  

  -----------

  However, here is the code of the receiver and the Panel, immediately after a failure.

  It is clear from the TABLE that he received the SIGNATURE of TCM TCM.

  There are NO orders in the table indicates that the receiver was still running for 2000 mSec (4 x 500 mSec) after receipt of the order.

  When it receives a SIGNATURE, the code written will trigger an event.  No errors are reported here.

  

  So what's happening?  It seems that the event should be raised, but it is not received (Event #0 in photo #2 reacts to the event and returns the word signature, without error).

  This happens not all the time - this case is broken loop # 211 - this number is between 20 and 2000.

  With all those open windows in fact do more often: without them always fails, but she performs thousands of do loops.

  So perhaps it is related to the CPU bustle.

  I checked that there is no error with the function SAVE of EVENTS, even when it fails.

  I come back to the fact that the PICTURE in photo #3 says that the signature was received, but it seems that the EVENT did not get generated or received.

  What are the causes that?

  Is it possible that, since the receiver is dynamically loaded and run, that things are not really created and ready when he says they are?

  OK, that seems to have fixed. -He managed 5000 loops, with the windows open and no failure.

  How completely obvious it sounds, when I put it in words:

  Don't ask a question until you are ready to hear the answer.

  The revised registers for events and THEN asks for the signature.

  So, when the answer comes, even if it is immediately, you're ready.

  

  Don't ask a question until you are ready to hear the answer.

  Don't ask a question until you are ready to hear the answer.

  Don't ask a question until you are ready to hear the answer.

  Don't ask a question until you are ready to hear the answer.

  Don't ask a question until you are ready to hear the answer.

  
  

• Flight Simulator 2004 install stops at 97% say there is an error with the file world.cab

  While the resettlement of fs2004, the installation stops at 97% saying there is an error with the file world.cab, this damaged disc 4.  Someone at - he found a solution to this?

  Thank you

  Well, if, as you say, the disc is damaged. The solution would be to get another drive.

  Although I would have a look at the following:

  Take a look at the following: http://support.microsoft.com/kb/258496

  I hope that, if necessary, you can get a free replacement disc.