installed ultmate windows 7 64 on my HP 17 e020dx E4W31UA #AB SYSTEM of BASE DRIVERS NEED

Similar Questions

• Install a Windows XP MCE instead of using the recovery CD

  Hello and sorry for my English

  I tried to install a Windows XP MCE "naked" instead of TOSHIBA restore CD. Because I don't need a lot of the software inside the TOSHIBA ghost. But unfortunately, the key to my certificate of authenticity of Windows in my Toshiba A100 stickers did not with a normal installation.

  Is it possible to use this key to install an original Windows XP MCE?

  N ° this key (license) belongs to the operating system shipped on your recovery media and it is not a kind of universal key that you can use with each CD installation of the full version.

• Photosmart 2610 won't install on windows xp Pro 64-bit

  Photosmart 2610 won't install on windows xp Pro 64-bit...

  I tried all the drivers for vista will not work, xp full install won't work, the departure from the base drivers for install through but nothing is displayed in the printers section...
  Anyone have resolutions?

  not found drivers achievable apears (beta) that they were made by hp but never released entirely outside by them:
  http://www.siliconguide.com/drivers/device/652/

• Impossible to install 10 Windows on Bootcamp partition

  #1

  Hello! I just tried to install Windows 10 on my Macbook with a 32 GB USB using Bootcamp. Everything was fine until I came to the part where I have to choose the partition where I want to install my Windows 10 and of course I chose the Bootcamp partition, but in fact I couldn't click on 'next' (I was so stupid and don't format it).
  So I just format the Bootcamp partition and when I tried to click 'next' he just told me 'we could not create a new partition or locate an existing one. I went through google and searched all regarding this problem and there are a lot of guys having almost the same or exactly the same 'error' when trying to install 10 Windows on the Bootcamp partition, but nothing has really helped me. I deleted everything except my USB key and someone told me that I should only have 4 partitions or less.
  He shows me the 4 partition but there are two partitions (3) and two partition (1).
  Is this a problem?
  Here is a picture of my diskutil list: https://i.gyazo.com/f554fb8aac609c2420f55f9696fa06a6.pnggiven that English is not my native language, I'm sorry for my bad spelling.
  I hope someone can help me install Windows 10 with Bootcamp! Thank you very much!

  You have a Fusion drive, which is usually not sold on a MacbookPro? You can check model/year your Mac? Please, do not post the serial number of your Mac.

  If you replaced the optical drive to create your own Fusion player, you can run the questions, depending on the year/model of your Mac.

• iCloud error after installing the windows update 10 v.1607

  After you have installed upgrading Windows 10 to v.1607 (adding birthday) my icloud will not install on my Windows Office/outlook.

  I have deleated and installed the latest version of icloud, but I get a message that icloud is not installed correctly.  Make the repair on Icloud, but still does not work.

  After you remove or uninstalled, restart?

• How to use fonts (installed in Windows) Mistral in Thunderbird 38.0.1?

  Mistral and several other fonts are installed in Windows 7. In earlier versions of Thunderbird, I was able to use the MIstral and all other fonts in Windows without difficulty. Mistral and many other fonts in Windows 7 are now available in Thunderbird 38.0.1.
  Why these policies - in particular Mistral - are now unavailable in Thunderbird 38.0.1 and how can I fix this?

  I use Mistral for my personal signature and it is extremely annoying and irritating to find it is suddenly unavailable.

  Your help will be appreciated.

  Thank you

  Gloria Eive

  Nadine said

  Mistral and several other fonts are installed in Windows 7. In earlier versions of Thunderbird, I was able to use the MIstral and all other fonts in Windows without difficulty. Mistral and many other fonts in Windows 7 are now available in Thunderbird 38.0.1.
  Why these policies - in particular Mistral - are now unavailable in Thunderbird 38.0.1 and how can I fix this?

  I use Mistral for my personal signature and it is extremely annoying and irritating to find it is suddenly unavailable.

  Your help will be appreciated.

  Thank you

  Gloria Eive

  Thank you, Matthew, but I fear that we have still not solved the problem of Thunderbird.
  Mistral is a TrueType font and was readily available in all editions of Thunderbird before the current version: 38.0.1.
  Of course the technicians who designed this update have changed something in the program so that TrueType fonts are no longer available. I need to use the Mistral. Parameters of the italics and the other options available in Thunderbird 38.0.1 are not acceptable.

  The question is "How can I access TrueType fonts in Thunderbird 38.0.1?

  Thank you very much
  Gloria Eive
  [email protected]

• Question seeks to clean install 10 Windows on the drive of the merger. El Capitan.

  Problem: try a clean install of Windows 10 via the Boot Camp Assistant on an iMac 27 inches (Late2013) with 10.11.4 installs hours (more than 8 hours) and then failed to install Boot Camp updates. Essentially installation take much long than normal and cannot install updates of the Apple software or create normally start Windows Boot Camp 10.

  Background: After problems of slowing down after upgrading to 10.11.4 (with improved Bootcamp Windows 10) who had previously worked fine for 10 months, to the point of a start of OS X time, I decided to do a clean install of my iMac with Fusion 3 to disk.

  As I was unable to remove the partition from Boot Camp through BCA because of his holding always at the same load, I used Internet recovery and reset the Fusion drive. This then required me to repair the partition of Fusion by car through THE "fix" option which seems to work very well. And reinstalled OS X 10.11.4 which works fine now (delays etc..)

  Try using BCA to create a new partition Boot Camp and a clean Windows 10 install after downloading an image of disk W10 directly from Microsoft (Win10_1511_1_English_x64), BCA by downloading software updates and by selecting the desired partition, it began to restart and initialize the installation. However the whole process has been very slow, each step takes much longer than usual, to progress. Leave for hours rest a blank screen or with a circle of rotation.

  I tried with another stick USB 3 and also a USB 2 stick, but none has made a difference.

  In the last attempt, I left running overnight and after 8-9 hours, he finally reaches the top of desktop Windows 10 and the update of Apple Bootcamp starts to load updates. However, he just hung and even after 2 hours, nothing was. Reboot and try once again has been the same.

  After that I tried to create a Windows Installer via BCA 8.0 however it gives just a TPG error when you try to select the drive (due to el Capitan I guess?)

  After four days of efforts, I'm a loser on how to get the Windows 10 on the Boot Camp partition. I can't even install W8 and upgrade due to the error of TPG.

  Any help or suggestions how to proceed with the diagnostic / resolution of the problem would be appreciated.

  Details:

  System: iMac (27 inch, end of 2013), 3.4 GHz Intel Core i5, 16 GB 1600 MHz DDR3, NVIDIA GeForce GTX 780 M 4096 MB, OS X 10.11.4

  • Nothing other than the keyboard and mouse attached via the USB ports, as well as the key USB of BCA. No other attached devices.
  • Reset memory NVRAM, SMC and ran more than once disk utility. No problem not reported.  Ran NVRAM reset before each attempt.
  • At ran EtreCheck report which seemed OK.
  • Verification of diagnosis ran who is childless.

  A detail I noticed after the merger by car there are now two Macintosh HD images when you use boot option. One previously. Are named "Macintosh HD" and "Macintosh HD2". I remember being Yosemite simultaneously in three, but which has been fixed in an update.

  In addition, it seems that no recovery partition. Cmd + R lance Internet recovery.

  Distill the results (the Boot Camp partition removed):

  / dev/disk0 (internal, physical):

  #: NAME SIZE TYPE IDENTIFIER

  0: GUID_partition_scheme * GB 121,3 disk0

  1: disk0s1 EFI EFI 209.7 MB

  2: Apple_CoreStorage GB internal drive 121.0 disk0s2

  3: disk0s3 Apple_Boot Boot OS X 134,2 MB

  / dev/disk2 (internal, physical):

  #: NAME SIZE TYPE IDENTIFIER

  0: GUID_partition_scheme * 3.0 to disk2

  1: disk2s1 NO NAME 209.7 MB EFI

  2: disk2s2 Apple_CoreStorage TB 3.0 drive internal

  3: disk2s4 Apple_Boot Boot OS X 134,2 MB

  / dev/disk3 (internal, virtual):

  #: NAME SIZE TYPE IDENTIFIER

  0: Apple_HFS Macintosh HD + 3.1 TB disk3

  Logical volume on disk0s2, disk2s2

  7BE1F343-ACBE-4144-BF86-C838BE1E49D4

  Fusion unencrypted drive

  iMac - simon: ~ list of cs simon$ diskutil

  CoreStorage groups of logical volumes (1 found)

  |

  + Logical Volume - Group CA0B8D0A-6315-4E85-B313-52AB509473F2

  =========================================================

  Name: Internal drive

  Status: online

  Dimensions: 3121237860352 B (3.1 TB)

  Free space: 0 (0 B) B

  |

  +-Physical volume 5E75EE74-EE1F-4FCB-A0C5-9ED5517FEB93

  |   ----------------------------------------------------

  |   Index: 0

  |   Disc: disk0s2

  |   Status: online

  |   Dimensions: 120988852224 B (121.0 GB)

  |

  +-Physical volume 91D639D6-634E-47C1-AFE5-616CE12E71E0

  |   ----------------------------------------------------

  |   Index: 1

  |   Disc: disk2s2

  |   Status: online

  |   Dimensions: 3000249008128 B (3.0 to)

  |

  +--> Logical volume family EE9934AC-F3CB-4101-ADB6-576F4371B4B9

  ----------------------------------------------------------

  Encryption type: no

  |

  +--> Logical volume 7BE1F343-ACBE-4144-BF86-C838BE1E49D4

  ---------------------------------------------------

  Disc: disk3

  Status: online

  Size (Total): 3106705375232 B (3.1 TB)

  Reversible: no

  Name: Macintosh HD

  Volume name: Macintosh HD

  Content indicator: Apple_HFS

  LVG Type: Fusion, sparse

  Summary:

  Q1: Should it take 4 + hours to install Windows 10 via BCA?

  Q2: Al must ultimately be so slow when initially W10 desktop?

  Q3; What I do once I arrive at the office of W10 but it automatically updates the graphics driver as BC update is simply suspended for centuries and get a working driver to restart at least W10?

  Q4: is there a problem with the disk HARD the Drive of Fusion that is causing all this delay and slow install / boot? ON the clean install OS X 10.11.4 it is back to be fast as usual and all tests show things are OK but W10 goes on the part of the HARD drive. No way to verify this beyond diagnosis or Etrecheck?

  Q5: Y at - it no problem with the GPT / MBR that may be causing the delay etc. ?

  Q6: How can I use my existing WindowsImageBackup backup from the previous W10 with the BCA install usb drive or how to create a USB stick otherwise recovery disk with my other single Mac have W7?

  Q7: How can I install W8 as I once did on Yosemite, via el Capitan without a mistake to TPG on selection of disc?

  Details:

  Day 5. Attempt at 6.

  Partition Boot Camp delete and try again install via BCA. First question, is that when the startup it goes to a blank black screen. For a time nothing left. Reset then using alt to select windows training results in almost instantaneous startup of the BCA message created and the beginning of the installation.

  4 1/2 hours from start of Windows 10 initial signature window.

  Then the second question. One to reach the Boot Camp update Office tries to start and install the drivers. Allows you to "list files...". "stage then sits at the bar about 5% green for 1 to 2 hours and does nothing. All actions in the Office of the W10 takes ages.

  In the meantime, auto update of the W10 appears a message saying that the updated graphics drivers as one of the few messages or actions during this period. Looks like Nvidia install with the entire package of experience (unwanted) etc. and very probably not the correct gpu driver.

  Finally deciding to cancel the installation of BC by killing the Setup.exe process. Then copy Boot camp install files on the desktop. Lasts 30 minutes to copy. Run again and this time, although taking 15-20 minutes to download and install later with the success message.

  Check the graphic driver it shows a yellow exclamation mark, so the following Microsoft instructions I use the uninstall option via the device and then Manager (slowly) come on board to load and download the latest Nvidia driver on their site for the GTX 780 M for 64-bit W10 etc. The same thing that I had used previously. Slow with running the Nvidia Setup program again, but eventually it works only to say that he could not install as unrecognized graphics device...

  He ends up with Microsoft PnP driver so it's at least sufficient start and run it again BC of the figure updates as all other drivers have been installed. To restart, but I get an error of K-Mode that is most likely related to this driver graphic and not possible to start in the new W10 Boot Camp partition after 7 hours.

  I have a picture of W10 backup recovery (WindowsImageBackup) I've had in a few weeks, but it will not install bet for the installed W10. I try with the ACO created the USB windows but can't seem to get a way to get into recovery mode and to get the menu to install it. I don't have a way to create a USB W10 recovery key now because my other Mac has just installed W7.

  Finally I tried to count a reset of the Recovery boot up option but it seems that it will take longer to start.

  I also went to the recovery and selected Boot Mode safe, but it opens on an empty black window and he's here doing nothing.

  Looks like I'll have to restart on via BCA and reinstall and try and solve the problem of graphics in order to install driver updates from BC and restart to W10 and hope that with the drivers, it returns to the operation and the normal starting time. Then update the gpu driver.

  I used and installed Boot Camp several times with over the years including previously an upgrade of W8.1 > W10 I used for over 6 months without problem. I've never known these installation very long or ice once in Windows even for the initial start upward.

  For any help or suggestion would be appreciated, and this seemingly simple process has now expanded to five days.

• HP Pavilion - 15-p264na: audio beats does not open after a clean install of windows 8.1

  Hello

  After a clean install of windows 8.1 the audio beats does not open.

  It appears in the control, but when I click on it nothing happens.

  I have sound, and everything seems to work ok, but I'm curious to know what happened.

  When I go to Device Manager and select audio, video controllers and game, there are 2 features 1 is AMD high definition audio and the other just says high definition audio device.both drivers are up-to-date.

  I look through the forums CIHI and I tried some of the links for the drivers of the itd, but they will not install.

  Any help would be appreciated

  Hello

  Download and reinstall the Realtek HD Audio software at the following link.

  http://ftp.HP.com/pub/SoftPaq/sp69001-69500/sp69164.exe

  When the installation is complete, restart the laptop.

  Kind regards

  DP - K

• error message iTunes displays locked drive, itl locked files, or do not have administrative privileges on the PC after a clean install of Windows 10

  Yesterday I did a clean install of Windows 10 on my PC with a backup of the hard disk external. I downloaded iTunes, but get an error message that the drive is locked, the .itl files are locked, or I don't have administrative rights to these files. I deleted and reinstalled the PCI DSS several times correctly in the PCI slot hoping that would be a solution, but to no avail. I am the only user on this computer and do not have administrative rights. Any help you can offer will be appreciated. Thank you

  This can help (from turingtest2):

  Fix iTunes for Windows security permissions

• Install the Windows own 8.1 to want Phoenix 810-230qe?

  I just bought a HP Envy Phoenix 810-230qe with Windows 8.1 Pro 64-bit.  It's my first HP system and so far I was impressed by the HP control process, fast delivery and the computer itself from what I can tell so far.   However, I have a question.  How must we do to do a clean install of Windows 8.1, without all the additional software that comes standard with the system?

  With my previous Dell systems, I have always asked for a Windows DVD and I downloaded the necessary additional drivers from Dell.  I bought a set of HP System Recovery install discs are expected to be able to do a cleanup, but unless I'm missing something, I don't see any options for loading just the Windows operating system and the related system drivers.  I see there are a few available through HP suspport drivers, but not all that are necessary and I see still no way to do just installing the OS.

  How is that possible?  Thank you...

  Hello

  You have the Win 8.1 drivers on your PC now located in the folder in C:\SWSETUP.

  Copy this folder to an external drive for use later when necessary.

  I don't know if you can download the 8.1 Win. ISO from Microsoft with an OEM product key. You couldn't do that when downloading win 8. You need a detail or, I think, a upgrade product key.

  If you have a retail key to win 8 you can Win 8.1 free download here.

  I would like to delete the stuff you want via programs and features and then create acustom Refresh Image. Then, if you need to recover, use the IRC with no expansion of the seller. Create an image of Microsoft System or use third-party imaging software.

  Jaco

  I'm not an employee of ch *.

  "" "" Please give a "Bravo, Thumbs Up" If the notice is relevant or "accept as Solution" to help other users of the forum having a similar problem.

  HP products:
  Retrograde 810-150se (Win 8.1) office in Win 7
  17 t - j000 Notebook (Win 8 upgraded to Win 8.1)
  H8 1380t CTO Office (Win 7)
  560z Desktop (Win 7)
  
  Other PC:
  Laptop Dell Inspiron (Win XP upgraded to Windows 7)

• Portege M750 - PCI controller is not installed on Windows 7 64 bit software

  Hi, got a SSD upgrade for my machine so decided to do a new install of Windows 7 64 bit and now I have and error indicating that the PCI controller software is not installed, I have tried windows update no. chance - to ideas please?

  Thank you, Peter

  Hi pbaker_1,

  Hmm... PCI controller could mean everything... I think you forget to install the driver for this device

  What is the device ID and the seller of it?

• Clean install of windows 7 - How to install the USB drivers?

  I bought a Toshiba Satellite C50 loaded with windows 8, but want to go back to windows 7.

  I downloaded the drivers needed and have mounted the .exe files on a USB pen for installation.

  Before proceeding to clean windows 8, I would like to know - if I install 7 will be my trackpad stopped working?

  If so, how to install relevant drivers from the USB pen?

  Thank you, John

  > Before you proceed to clean windows 8, I would like to know - if I install 7 will be my trackpad stopped working?

  Of course, this might work.
  After Installing Win 7, you should be able to install the drivers for the USB flash memory key.

• Clean install of Windows 7 on Satellite L655

  I have a Satellite L655 and replace the HDD with a SSD (2 sheets) system (more small capacity, 1 partition). I also want to do a clean install of Windows 7.

  I'll be able to use the recovery disc for this? If so, will I have to reactivate? Thank you.

  > I'll be able to use the recovery disc for this? If so, will I have to reactivate? Thank you.

  What exactly do you want: clean windows installation or by using the disk Toshiba recover?

  I mean own installation only the Windows operating system using the Microsoft Win 7 disc.
  This installation requires a valid serial key.

  But using the Toshiba recovery disc requires no any key since the BONES of the window is already enabled on this drive.

• HP ENVY 750-175se: stuck on "Set up Windows" - fresh install of Windows 7

  Hello

  I have a new install of Windows 7 Ultimate 64 bit on my desktop HP Envy. I installed myself, everything went well. However, now when I am setting up Windows (on the screen where it says "Select a username for your account and your computer name to distinguish it from the network"), the keyboard nor the mouse work.

  The mouse on the background light is on and both work until I have start Windows (ie. the BIOS) and both are plugged into the USB 2.0 ports. I tried different USB ports around the system, but that did not work at this stage (well that as well the mouse and keyboard worked for the previous points of the facility before the restart brought me to this screen). I tried to disable Legacy Support in the BIOS, but that only returns an error message saying "Boot Device Not Found". I tried another keyboard that I know works on other systems, no difference here. I did research online that some users recommend using a PS/2 keyboard, but there is no port for a on this machine. I'm literally not to penetrate into my operating system, but none of the USB devices work. I've also seen suggestions about how to disable of EHCI or XCHI driver settings Pre-boot in the BIOS but I can't even find those on this BIOS. So maybe someone knows I am missing a setting in BIOS that can help me out here or something? Thank you!

  Hello:

  Here is what, in my view, the problem is...

  Intel has removed support for USB 2.0 chipset chipset Skylake.

  This means that only USB or normal DVD installs windows 7 will not work.

  Microsoft Windows 7 ISO not the USB 3.0 drivers natives either.

  Therefore, add USB 3.0 drivers in Windows ISO.    Intel has on it.  They have a utility that does all the work for you.

  https://Downloadcenter.Intel.com/download/25476/Windows-7-USB-3-0-creator-utility

  Run the utility and point your support Installation USB and windows 7 above should install.

  There is a readme on the link above for instructions on how to convert your DVD in a bootable usb flash drive.

• Impossible to install old windows on Satellite A100-787

  I bought the Satellite A100-787 with Vista home premium installed. I wanted to remove vista and install older windows.
  I tried Win XP without service pack, but the installation gave me a lot of blue screens and could not continue.
  I tried Windows Millennium, but even once it froze during installation because of "material conflict". How can I install old windows on this computer.
  Pls don't tell me that it is not compatible with the old windows, because this makes no sense.

  > How to install old windows on this computer?

  Thank you for using Windows XP edition family SP2 not SP1. I installed Windows XP SP2 home edition on the new Satellite A200 and if I can do it on the A200 you can do this on A100 also.