Error with Nikon D600 and PES 11 in the RAW (.nef) 9 files.

Similar Questions

• I bought a Nikon D810 and will not open the RAW files in Photoshop 6. Can someone help me?

  I bought a Nikon D810 and will not open the RAW files in Photoshop 6. Can someone help me?

  If you mean Photoshop CS6, select help > updates and download the latest Adobe Camera Raw, which is 8.8.

  Get back to me if it doesn't.

• I have 11 items and wish to treat the RAW / NEF files. How can I do this?

  I have 11 items and wish to treat the RAW / NEF files. How can I do this?

  You can certainly buy PSE14 in the upgrade price. Why not use the link below to install it and try it free for 30 days.

  https://helpx.Adobe.com/Photoshop-elements/KB/Photoshop-elements-downloads.html

• I have a Nikon D600 and downloading photographs to Lightroom 6.1 all images have their settings far from the truth and is no where near what is shown to the camera, i.e. temp is 3800 and tinted 80 magenta, other parameters are also in. other Nik

  I have a Nikon D600 and downloading photographs to Lightroom 6.1 all images have their settings far from the truth and is no where near what is shown to the camera, i.e. temp is 3800 and tinted 80 magenta, other parameters are also in. other Nikon cameras do not. Everyone knows about this problem?

  Looks like you are applying (accidentally) a "Preset" for these photos. Make sure that there is no preselection specified in the import dialog box, and the first (bottom) in the history of develop does not list a preset.

• I have a Nikon D 810 camera and Photoshop CS5.  I downloaded camera 8.8 Raw and DNG converter.  I can't open the raw (.nef) files, and treat them with the DNG Converter. What's not?

  I have a Nikon D 810 camera and Photoshop CS5.  I downloaded camera 8.8 Raw and DNG converter.  I can't open the raw (.nef) files, and treat them with the DNG Converter. What's not?  Thank you!

  As I said earlier, the DNG Converter works ONLY on files, not on files.

  Do not target the individual files.  Target Of THE FOLDER that contains them.

  Make sure that said FILE DO NOT contain any other files , you have already settled before, or your settings will be eliminated when re-converted to DNG.

  No need to write long explanations.  More messages are, the more chances you have of receiving relevant responses.

• I was on YouTube with my helmet and then I unplugged the and plugged them back and now I don't got no noise at all.

  I was online on you tube with my headphones and then I unplugged the and plugged them back and now I had no noise at all, what can I do? I checked the audio Manager and it seems fine.

  Hello

  (1) you use Internet Explorer or another browser to go online?

  (2) this happens on all websites and pages?

  (3) other sounds work fine on the computer?

  (4) may I know the operating system you are using?

  (5) were there any changes before the show?

  I suggest you to follow the steps mentioned below and check if it helps.

  Method 1: No sound in Windows.

  http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-Windows

  Method 2:

  Check the playback settings to see if the device is turned off / disconnected.

  Method 3: If you are using Internet Explorer, check if this option is enabled.

  a. Click Start, type "inetcpl.cpl" and press to enter.

  b. click on the Advanced tab.

  c. scroll down to see the multimedia section and make sure that "play sounds in Web pages" option is selected.

  d. click ok to apply the changes and see if the problem still occurs.

  Restart Internet Explorer and check if you can hear the noise.

  You can also try to update flash player on your computer and check if the problem is resolved.

  For more information, see the link:

  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-fixing-common-sound-problems

  I hope the information is useful!

• All-in-one HP Officejet 7300/7400 series, it will work with Windows 7 and how to get the OCR software work?

  I have a HP Officejet 7300/7400 series all-in-one, it will work with Windows 7 and how to get the OCR software work?

  By installing complete software functionality of the HP cd or online installation and connection of the printer only when the installation says too much

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=4062&LC=en&cc=UK&DLC=en&sw_lang=&product=391182#n193

• I have problem with Muse files when you work at home with my laptop and when I open the files again in my work with my IMac.

  I have problem with Muse files when you work at home with my laptop and when I open the files again in my work with my IMac.

  I do: when I am uncomfortable with the laptop I save the files on the laptop, then on my external hard drive. Then, when I'm at work, I opened the drive, but the Muse says every time, that so many links in the 'active' is missing. And it takes a lot of time to get all the missing link. Like today I had to open a file of Muse from the external hard drive, and there are about 100 links that are missing.

  How can I solve this problem

  the best thing if you are a user of creative cloud is to store the files in a folder in your account of cloud instead of transferring the files from one computer to another.

  If you are not a Subscriber cc then Dropbox or iCloud will work as well.

• The event viewer displays continuously errors with ID 7000 and 7009

  I use Acronis Disk Monitor, which shows the disk health 82% due to a bad block on disk. Observer events poster continually errors on ID 7000 and 7009, but I can't find a solution to these errors or what they mean exactly.

  11/14/2010 08:31 am, Catkin333 wrote:

  I use Acronis Disk Monitor, which shows 82% because of the bad health disk
  block on the disk. Event Viewer displays continuously errors on ID 7000 and
  7009, but I can't find a solution to these errors or that they
  mean exactly.

  If Acronis reports bad blocks on the disk, then you should replace the disk as soon as possible.  Blocks of bad sectors/bad is not repairable, and once they begin to appear that they tend to behave like a snowball rolling downhill, you will get several of them with increasing speed.  You may lose your data if you keep using this drive.

  Regarding the events 7009 & 7000, you will need to copy & paste the events here for give us to you more information.  Double-click on the event to see its properties, and then click the icon of the Clipboard (which looks like 2 pages of paper) to copy the event, you can then paste it in your next post.  These Service Controller errors may be caused by a multitude of different things.

  John

• Analysis of the errors with 10.6 and F2210

  I have a deskjet F2210 which works very well.

  With my old Mac Mini (G4 based) and 10.5, all the features work very well.  I just bought a new Mac Mini (intel based) with 10.6.4 and scanning always fails with "unknown error" before arrived at the end of the analysis.  Printing is fine.

  I deleted all of the HP software and reloaded.  The same problem.

  The F2210 works very well, because he still works with my old Mini.

  It will be unfair to scan with the new Mini and 10.6.

  Ideals I can do?

  Thank you!

  Kevin

  If you are using Snow Leopard and you have the HP software before Snow Leopard (either from a CD that is not marked as compatible with 10.6 or you recently upgraded to Snow Leopard and had the HP software on your Mac before you upgraded), you must uninstall the software by using the "scrubber":

  Go to Applications/Hewlett Packard / click Uninstall HP
  Click on continue
  Highlight your device in the left pane
  Hold down the Ctrl and Opt Cmd and click on uninstall
  There will be a pop up that asks if you are sure you want to uninstall all hp software. (At this point, if you continue, all HP printers you have installed will need to be reinstalled)
  Click on continue and let it finish

  Restart your Mac

  Now run a software update.

  Finally, download and install the "Full Featured" driver and software from the "Support & drivers" link at the top of this page.

• Tips on how to get attached with Nikon D810 and Lightroom - I tried with the uSB cable but Lightroom does not recognize the camera. My memory card has no images on it that I read somewhere that it can slow things down if it has pictures on i

  I tried to use the uSB cable, but Lightroom does not recognize the camera. My memory card has no images on it that I read somewhere that it can slow things down if she has no images on it

  If you use Lightroom CC / 6 on a Mac OSX El Capitan you must update to the latest version of CC 2015.4 / 6.4. Problems with Nikon capture home has been fixed in the latest update, the lis below.

  Lightroom Journal | Tips and advice straight from the Lightroom team.

• Nikon D7100, I can't download my RAW to Lightroom files. I have read all the post, update of 3.6 to 4.4 and 5.7 with Lightroom 2015; Nothing helps!

  Nikon D7100, I cannot download my RAW to Lightroom files! I have read all the post and started with Lightroom 3.6 4.4, Lightroom 2015 then Lightroom 5.7 update. Nothing helps!

  The Nikon D7100 is supported from 4.4 LR on-site. So I have no idea why you have problems to import files NAVE of this camera or the card memory used in this device.

  You use the Nikon software first to get images of camera or card to your hard drive? I read somewhere that the Nikon software does something for the NAVE of the files making them unreadable by LR.

• Contact form submission error with yahoo, aol, and hotmail e-mail addresses

  Customers with accounts yahoo may still unable to receive emails. Has he ever been resolved?

  Limits on that e-mail addresses work and do not work not controlled by what it is under the control of Muse. You must work with your hosting provider. Muse uses the provider e-mailer by your hosting provider. If this e-mailer was forced on to the e-mail addresses, these constraints will be applied to e-mail messages generated by forms of the Muse.

• Strange error with RHCL RH10 and RH11 command-line compilation

  Hello once again, RoboHelp gurus!

  I feel a strange error using the compilation process command-line rchl in RoboHelp 10 and 11 of RoboHelp.

  Here is the command I use:

  CD "C:\Program Files (x 86) \Adobe\Adobe RoboHelp 10\RoboHTML.

  RhCl "C:\folder\project.xpj"-l "SSL_Name" o "c:\outputfolder" g "C:\log\folder\logfile.txt".

  When I generate the log of the cmd file, I see an error "LILo: BIBCientInit could not initialize" twice in the window of cmd prompt while compiling is the treatment.  The cmd prompt window looks like this:

  
  

  C:\Program Files (x 86) \Adobe\Adobe RoboHelp 10\RoboHTML > RhCl "C:\projectfolder\project.xpj"-l "SSL_Name" o "c:\outputfolder" g "C:\logfolder\logfile.txt" [press ENTER]
  

  LILo: Could not initialize BIBCientInit
  

  LILo: Could not initialize BIBCientInit

  C:\Program Files (x 86) \Adobe\Adobe RoboHelp 10\RoboHTML >

  
  

  The created FichierJournal.txt has no mention of ""LILo: BIBCientInit could not initialize "it contains."  Compiling builds without problem, as far as I can tell.

  
  

  The same thing happens when I do not create the log during the cmd file and it errors record right "compensation output folder.  But, it seems to me that the output folder does not actually get disabled.

  
  

  This allows the viewing of the compilation process line by line in the cmd prompt window.  When the compiler indicates "output Compensation folder...". ', the ' LILo: BIBCientInit failed to initialize "error message appears twice, and then the process continues.

  Here's the command:

  CD "C:\Program Files (x 86) \Adobe\Adobe RoboHelp 10\RoboHTML.

  RhCl 'C:\folder\project.xpj'-l 'SSL_Name' o 'c:\outputfolder '.

  The cmd prompt window looks like this:

  
  

  C:\Program Files (x 86) \Adobe\Adobe RoboHelp 10\RoboHTML > RhCl 'C:\projectfolder\project.xpj'-l 'SSL_Name' o 'c:\outputfolder"[press ENTER]

  Adobe (R) RoboHelp version 10.0.0.287 Project command line compiler

  Copyright (C) 2006-2007 Adobe Systems Incorporated and its licensors. All rights reserved.

  Project: C:\folder\project.xpj

  Page layout: SSL_Name.

  Output: c:\outputfolder.

  Scanning for the compilation project...

  Review completed.

  ATTENTION: No luggage description of the file.

  From compilation...

  HTMLHELP 10.0.0.287 preprocessor

  Compilation C:\folder\! chm_tmp_folder_0\project.xpj ...

  Preparation create HTMLHELP...

  Compensation output folder...

  LILo: Could not initialize BIBCientInit
  

  LILo: Could not initialize BIBCientInit

  Preparation of the HTML Help files...

  Copying files...

  ...

  It's okay if it's a HTMLHelp or WebHelp output.  Any thoughts on what is this error and what is the cause?

  I've been away from RoboHelp for about 9 months, but I'll be back on the same projects and the same version of RoboHelp 10 and the same compilation process.  The difference is that I have a new laptop.

  Thank you very much in advance for your time!

  EA

  Adobe was able to recreate this issue on their end, and a bug was created for her.

• MySQL Sytax error with master pages and details

  Master and detail pages.
  I get a SQL error when I click on an item in the master page.
  "You have an error in your syntax SQL; "check the manual corresponding to your version of the MySQL server for the right syntax to use near 'ID = 16 LIMIT 0, 10' at line 1"
  If I try to open the details page, I get
  "You have an error in your syntax SQL; "check the manual corresponding to your version of the MySQL server for the right syntax to use near 'ID = - 1 LIMIT 0, 10' at line 1"
  I created this pair by clicking on insert/object / master details page.
  I tried this several ways, but always get the same result.
  Is there a bug in CS3?

  Sorry that I have solved it myself.
  I accidentally put a space in a header of table in the mySQL database.
  Everything works fine now.