restoration was arrested in middle.now boots to halfway
my roommate restored to an earlier date, but in the middle of the restoration, he canceled. now, the system starts at halfway and become inactive but the mouse still moves. I tried to repair it with the installation disc and it tell me a restore is already running. any ideas?
Hello
· You get the error message?
I suggest you follow the steps mentioned below.
Method 1:
I suggest you to check if you are able to boot into the last good known Configuration. Follow the steps mentioned below.
a. restart the system and then keep tapping F8 until you reach the start menu.
b. Select last good known in the list and press ENTER.
Method 2:
Start in safe mode and do a system restore. Follow the steps mentioned below.
a. restart the system and then keep tapping F8 until you reach the start menu.
b. Select safe mode from the list and press ENTER.
c. do a system restore.
Follow the steps mentioned in the article below.
System Restore frequently asked questions
http://Windows.Microsoft.com/en-us/Windows-Vista/system-restore-frequently-asked-questions
Thanks and regards.
Thahaseena M
Microsoft Answers Support Engineer.
Visit ourMicrosoft answers feedback Forum and let us know what you think.
Tags: Windows
Similar Questions
-
I was arrested in the middle of the cs6 download and my internet. now I am online, he says "pause" how to download again...
http://helpx.Adobe.com/x-productkb/policy-pricing/CS6-product-downloads.html
Mylenium
-
Ms more recent update for my VISTA plus old (2008 Acer laptop) was the last event, now cannot start PC... try to recovery without success, a loop back and asking to recover or normal boot... Attached to jumps, safe to ask if I want to recover... I never received an OEM of VISTA version, but the first time having problem after all these years... Help, please... Would contribute to a boot disk, if so, how can I get a copy?... Thanks, Dave * address email is removed from the privacy *
Hello
See if that helps you.
Do a Safe Mode system restore to before the problem started.
http://bertk.MVPs.org/html/restoresysv.html
How to access Safe Mode
http://www.bleepingcomputer.com/tutorials/how-to-start-Windows-in-safe-mode/#Vista
@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
If it doesn't, try a startup repair and / or a system restore using a DVD of Vista from Microsoft
Manufacturers recovery disks normally do not have Service Options; they are normally a relocation to the factory only settings option.
Here is the guide to repair Options using a Vista DVD from Microsoft.
If a friend or a work acquantance of yours has one, you can borrow and use it for repairs.
http://www.bleepingcomputer.com/tutorials/repair-Windows-with-Windows-Startup-Repair/
Table of contents
- Overview of Windows Vista repair options
- How to perform an automatic repair of Windows Vista using Startup Repair
- Advanced Tools Overview
- Conclusion
If you do not or can not borrow a Microsoft DVD there is a download of a file ISO of Vista Startup Repair available that you can put on a Bootable floppy to make the above startup repair and that the method is recommended by a large number of posters in these Forums.
Unfortunately, you have to buy it.
Here is a link to it:
http://NeoSmart.net/blog/2011/Windows-Recovery-discs-updated-reinstated/
@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
And here's how to use Recovery of Acer.
http://Acer.custhelp.com/app/answers/detail/A_ID/2631
To start the system recovery:
- Restart the computer.
- When the Acer logo appears on the screen, press the left Alt and F10 keys.
- If you are prompted with a Microsoft Windows splash screen, press the Enter key.
- After that the Acer eRecovery Management application is loaded, select your type of restore.
- Read the review and then click Next when you are ready.
- Click Next to start the restore process. It may take 10 minutes up to an hour fom anywhere to restore.
- Once the restore is complete, your computer will restart. After the reboot it will load Windows and start the installation of your software and drivers. Your computer will restart several times during this process. Once they are all completed, your computer will be like it was when you bought it first.
See you soon.
-
How can I identify the date when the last system restore was used to roll back the pc?
Original title: how System Restore last used
As the title suggests, how can I identify the date when the last system restore was used to roll back the pc?
I can remove all restore points. I've used twice now the beta off Defender & he assures me
the pc is clean Virgin.I have just got rid of a Trojan dropper & a Win 32/AmmyyAdmin. -(whatever it was!)
I now seem to have acquired Windows Powershell along the way, gawd knows where!
He was not here a few days ago and I don't have any idea where it is!
What is it and should I be worried?
Thank you
Hello
You can check this link:
How to restore Windows XP to a previous state
-
I can't access my iTunes because he was arrested by Data Execution Prevention.
I can't access my ITunes because he was arrested by DATA EXECUTION PREVENTION. I followed the directions for l ' turn off just for ITunes according to the instructions provided by Microsoft and I was told that I could not run this program with it off. Help!
original title: DATA EXECUTION PREVENTIONHi A.Law of Dallas,
Method-
I recommend you to run clean boot.
Put your boot system to identify if any third-party applications parts or startup items are causing the problem. You must follow the steps in the article mentioned below to perform a clean boot.How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
http://support.Microsoft.com/kb/929135Note: you must follow step 7 of the article mentioned above to return the computer to Normal startup after all the troubleshooting steps.
Check if the problem persists when the computer is in a clean boot state.
In addition, you must uninstall and reinstall ITunes as well.
You can check the link mentioned below for assistance
Uninstall or change a program
http://Windows.Microsoft.com/en-us/Windows-Vista/uninstall-or-change-a-program
Hope this helps!
-
0rignal title: Vista SP1 didn't update problem
So, recently, I was on my computer of gf and noticed she had some updates, it could use his computer which included the SP1 update. So I went through the process trying to update his computer and he has been a disaster and have had many problems and seems to have tried everything. It has a Dell inspiron 1525 and has no CD and no key for its program of Vista. I burned a Vista recovery disk and tried troubleshooting by using that, but have not had much luck. When I use the Startup Repair tool there is no nothing. So I tried to use the restore of the system with the Description of "install: Windows Vista Service Pack 1. He had a restore point saved just before I tried to update to SP1. Whenever I chose this method, it's but the whole process then in the end it says:
"System restore was not entirely successful. File system and the setting of your computer have not changed. "
then he begins to list the details with the error code (0x80071AA7) and then gives me the option to close or 'Run System Restore"once again that is an endless loop, because I just end up with the same error each time. If anyone has had this problem and bring myself through it. I don't want to reinstall windows because it seems simply ridiculous and plus that she a lot of pictures on his computer and I want to get rid of those.
If you need more information please let me know and evil provides everything I can
HelloFollow the steps and check if the problem persists.Step 1:I suspect that your security program may be responsible for this. I would suggest you temporarily disable all security software and try the system restore.
http://Windows.Microsoft.com/en-us/Windows-Vista/turn-Windows-Firewall-on-or-offhttp://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software
Note : Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.Step 2:As for installing updates is concerned, I you should install them after you put your computer in aclean boot State. There could be a third-party software in conflict with updates. Clean boot helps eliminate these conflicts.Note: Restart your machine as usual by following step 7.Aziz Nadeem - Microsoft Support[If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]
-
My DCIM folder was deleted by mistake now I can't see the picture of my camera which is a Nikon Cool Pix L3 on the computer
My DCIM folder was deleted by mistake now I can't see the picture of my camera which is a Nikon Cool Pix L3 on the computer
====================================
The following freeware may be able to recover the
pictures that have been deleted from your memory card...(FWIW... it's always a good idea to create a system)
Restore point before installing software or updates)Recuva downloads (versions)
http://www.Piriform.com/Recuva/builds
(Download the Slim version)If you have been recover files deleted from your hard drive
Player... the best bet would be on a Portable version
memory card or a Flash drive. (reduced risk of)
overwrite deleted files)Introduction of Recuva (tutorials)
http://www.Piriform.com/docs/Recuva/introducing-RecuvaRecuva - indicating what to look for
http://www.Piriform.com/docs/Recuva/using-Recuva/advanced-mode/specifying-what-to-search-forTaking pictures more should create a new folder DCIM
on your memory card. -
I have a SAMSUNG RV510 laptop and the built-in webcam was working before and now, if I have the webcam the screen is in night vision which is entirely green. I tried to restore and re - install the drivers and even removed the chip back and webcam is plugged in but nothing works.
Please give me a solution for this.
Thank youSee its unlikely a MS or Win, Samsung help/support solution or their forums, its their equipment and their program
-
Recently, I upgraded my Mac OS to the wonderful 10.6 Snow Leopard or as it is called. Now, I get an alert message when opening Illustrator CS3. The specific alert message is:
"FMCore was arrested. Please start from the pane of system preferences and then restart Adobe Illustrator CS3. »
Normally, I would have understood what to do here; Go to System Preferences and start FMCore. But I can not find FMCore anywhere. Now what?
I reinstalled CS3 from the drive, hoping that "would repair" FMCore, but it does not solve the problem. And I searched high and low for an answer before posting here. But apparently, my problem is unique enough that no one is talking.
Can anyone advise me on what I could / should do from here? I appreciate any help you can offer.
Down from the system preferences panel, you should see Suitcase Fusion. Click on it and turn on the kernel. You should probably also select tour start. You may have to disconnect and relog on until it works.
-
I have a My Passport to the top by car and I get error messages on this to be ejected (although it was still connected). Now my computer does not recognize the drive. All solutions?
Drive, interface in the crankcase of training controller, or the USB port or the cable may be faulty.
-
I have a powermac G5 running 10.5.8 that I continued to get a screen telling me to level, which I did, then I was told that it was not compatible, and now I have nothing.
How can I return to my old system or download one that will work. bold text
You can download Firefox here 3.6.xx:
-
After the upgrade to Firefox 6.0.2 first flash content was not displayed, but now the plugin does not load. Firefox plugin check says Flash is obsolete, but I just downloaded it from the Web site.
Mac OS X 10.7.1
Firefox 6.0.2
Flash 10.3.183.7The current versions of Firefox are 64-bit on OS X, if you need a 64-bit version of Flash with Firefox 6.0.x or you must start Firefox as a 32-bit application to be able to use a 32-bit version of a plugin.
- Closing of Firefox
- Launch the Finder and open the Applications folder
- Make a right click or Ctrl-click the icon of Firefox.app
- Select "Get Info."
- Select or deselect the option "open in 32-bit mode".
- Close window "Firefox Info"
- Restart Firefox
-
I was in the middle of an update when my Macbook Pro closing in on me, and when he turned back, he wouldn't let log me into my account. I know that my password and everything, but this isn't just me connect. I have to restart the laptop? If so is there a way I can save all my documents? Please help as soon as POSSIBLE.
Was it a software update from apple? When an apple update requires a restart, it may take a little time so that it starts. If it do not, you can try a reboot. What year MBP and operating system you are running. If everything fails and you have the recovery partition. You can start on it and do a reinstall. This should not delete any personal files.
-
Forgotten mini iPad 3 password, so I restored to factory settings, and now, when you try to connect back apple we still wonders of forgotten password!
If you have forgotten the password for your iTunes account (if you have settings > iCloud > find my active iPad you need to enter the id and password to reactivate the iPad): http://iforgot.apple.com
-
, can not send email - message says may be installed incorrectly and
EU restore the computer today and now can't send email - message maybe not installed correctly, not enough memory - a lot of memory and this number
ox80070002. What to do
See www.oehelp.com/OETips.aspx#7 if you use OE and www.oehelp.com/WMUtil/ if you are using Windows Mail in Vista and you use Windows Live Mail, and then ask here: www.windowslivehelp.com
Steve
Maybe you are looking for
-
need to find software to download HP Officejet 6500 more e-All-in-One-E710n-z a
HP does not print. called apple support and deleted driver. now I'm unable to find the driver to download on iMac there. HP Officejet 6500 more e-All-in-One-E710n-z a Help, please Thanks marianne
-
Hello, what are the steps to wash a bunch of sports Apple Watch. Thank you
-
Hello I want my time a loop to run according to the constant time, I put in a table, but it will not scrupulously. For example, I set the time as 1000,1000,3000,3000... : but it's more like 1000,1000,1000, 3000... sometimes. but sometimes seems OK...
-
Yoga 2 Pro advertising plays when the computer goes to sleep
Hello, so I recently bought a Yoga 2 Pro and have almost no complaints. One small thing I noticed is that my computer from time to time upon entering the mode "ensure" with the lid open, instead of displaying a black screen as planned will instead sh
-
How to install drivers delayed in TVSU without having to download new ones?
Think Vantage Software Update seems to require that I have to select new software to download before I can access the list of the SW that I already downloaded for deferred installation. How can I get around this?