error with the sequence of keys in cmds.cfg

Similar Questions

• How reslove an error with the dbms_redefinition.start_redef_table command?

  Command:

  BEGIN

  () DBMS_REDEFINITION.start_redef_table

  uname = > "kiku"

  orig_table = > 'pletest3_pn_kiku_api_db ',.

  int_table = > 'pletest4_pn_kiku_api_db');

  END;

  Error:

  Error report:

  ORA-12008: error path refresh materialized view

  ORA-14400: inserted partition key is not mapped with any partition

  ORA-06512: at "SYS." DBMS_REDEFINITION", line 50

  ORA-06512: at "SYS." DBMS_REDEFINITION", line 1343

  ORA-06512: at line 2

  12008 00000 - "error in the path of refresh materialized view.

  * Cause: Table SNAP$ _ < mview_name > reads lines of sight

  MVIEW$ _ < mview_name >, which is a view of the main table

  (the master can be on a remote site).  Any

  error in this way will cause this error when updating.

  For updates of the Rapids, the table < master_owner >. MLOG$ _ < master >

  is also referenced.

  * Action: Examine the other messages on the stack to find the problem.

  See if SNAP objects $ _ < mview_name >, MVIEW$ _ < mview_name >.

  < mowner >. < master > @ < dblink >, < mowner >. MLOG$ _ < master > @ < dblink >

  There is always.

  How reslove an error with the dbms_redefinition.start_redef_table command?

  As I said before, this may be reproduced if the intermediate table is not created correctly.

  SQL> --My database version.
  SQL> ----------------------
  SQL> SELECT * FROM v$version;
  
  BANNER
  --------------------------------------------------------------------------------
  Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - 64bit Production
  PL/SQL Release 11.2.0.1.0 - Production
  CORE    11.2.0.1.0      Production
  TNS for Linux: Version 11.2.0.1.0 - Production
  NLSRTL Version 11.2.0.1.0 - Production
  
  SQL> ed
  Wrote file afiedt.buf
  
    1  CREATE TABLE not_partitioned_tbl AS
    2*  SELECT object_id,object_name,created,owner FROM all_objects
  SQL> /
  
  Table created.
  
  SQL> ALTER TABLE not_partitioned_tbl ADD CONSTRAINT not_partitioned_tbl_pk PRIMARY KEY (object_id);
  
  Table altered.
  
  SQL> CREATE INDEX npt_created ON not_partitioned_tbl(created);
  
  Index created.
  
  SQL> EXECUTE DBMS_STATS.gather_table_stats('SCOTT','NOT_PARTITIONED_TBL',cascade=>true);
  
  PL/SQL procedure successfully completed.
  

  Now, I create the staging table without MAXPARTITION, so not all "created" dates cannot be mapped.

  SQL> ed
  Wrote file afiedt.buf
  
    1  CREATE TABLE partitioned_tbl (object_id NUMBER, object_name VARCHAR2(30), created DATE, owner VARCHAR2(30))
    2      PARTITION BY RANGE (created)
    3      (PARTITION pt_2005 VALUES LESS THAN (to_date('01/01/2006','dd/mm/rrrr')),
    4       PARTITION pt_2006 VALUES LESS THAN (to_date('01/01/2007','dd/mm/rrrr')),
    5       PARTITION pt_2007 VALUES LESS THAN (to_date('01/01/2008','dd/mm/rrrr'))
    6      --PARTITION pt_rest VALUES LESS THAN (MAXVALUE) -- Maxpartition  is commented out intentionally.
    7*     )
  SQL> /
  
  Table created.
  
  SQL> EXEC DBMS_REDEFINITION.can_redef_table('SCOTT','NOT_PARTITIONED_TBL');
  
  PL/SQL procedure successfully completed.
  
  SQL> conn sys as sysdba
  Enter password:
  Connected.
  SQL> ed
  Wrote file afiedt.buf
  
    1  BEGIN
    2     DBMS_REDEFINITION.start_redef_table('SCOTT','NOT_PARTITIONED_TBL','PARTITIONED_TBL');
    3* END;
  SQL> /
  BEGIN
  *
  ERROR at line 1:
  ORA-12008: error in materialized view refresh path
  ORA-14400: inserted partition key does not map to any partition
  ORA-06512: at "SYS.DBMS_REDEFINITION", line 52
  ORA-06512: at "SYS.DBMS_REDEFINITION", line 1646
  ORA-06512: at line 2
  
  SQL>
  

• Change the source of entry with the Caps Lock key does not

  It should be possible to change the input source with the Caps Lock key on macOS Sierra.

  and I checked "Toggle ABC of input source with caps lock shift" in system preferences > keyboard > input Source.

  However, it does not lock shift still only works as long as CapsLock

  I tried to reboot, reset the keyboard shortcuts, deactivation of Siri, reset NVRAM and reset the SMC, but still does not.

  I use only the default input source and have not installed and related programs to the keyboard or input source.

  Can anyone help?

  Thanks in advance.

  Greetings slwsbl!

  Thank you for using communities of Apple Support.

  I see that you want to change the input source with the SHIFT key on macOS Sierra. I understand the importance of wanting to use a specific key when changing inputs. I'm happy to help you with this.

  It is possible to do. Please take a look at the User Guide helps Mac, specifically, this section:
  
  

  Switch between input sources

  To switch between input sources, do one of the following:

  • Use the menu entry: Click on the menu entry in the menu bar, and then choose the input source. If an input source is dimmed, the current application does not support it.

  • Use the Caps Lock key: Press the caps lock shift key to switch between a non-Latin input (such as the Chinese or Korean) source and an input source Latin (for example, French or English).

    To use this method, you must select the option "use Caps Lock to toggle to and from" in the stream of input methods. Choose the Apple menu > System Preferences, click keyboard, and then click input methods.

  • Use keyboard shortcuts: Press control-Option-space bar to select the source of the following entry in the menu entry, or control-space to select the previous input source.

  Best regards.

• How to fix the error with the code: 0xe7210001 failed to load powrprof, object: cls

  Hello

  Dose anyone know how to fix the error with the code: 0xe7210001, message: unable to load powrprof, object: CLSD-no-it is found;
  OR: Fingerprintsoftware OR error: replicas THotkey.exe message window and the computer freezes

  Maleware scanned and virus, also in safe mode, found no infection, reinstalled driver fingerprint, but nothing has changed.

  grateful for the help!

  Hello

  > message: unable to load powrprof, object: CLSD-no-it is found;
  In my view, this would mean that there is a problem with Toshiba Power Saver
  What laptop Toshiba, you have exactly?

  Maybe reinstall Power Saver could help. You can find it on the official website of Toshiba.

• Satellite L350-214 - error with the software Reeltime

  Hello

  I have a Satellite L350-214 with Windows 7 Pro and have encountered an error with the software Reeltime, I uninstalled and reinstalled and still get the error below. Any help or assistance would be great

  Tony Miller

  Log name: Application
  Source: Windows Error Reporting
  Date: 2010-11-30 12:27:58
  Event ID: 1001
  Task category: no
  Level: Information
  Keywords: Classic
  User: n/a
  Computer: Tony-TOSH
  Description:
  Fault bucket 1223018385, type 5
  Event name: CLR20r3
  Answer: No available
  Cabin ID: 0
  Signature of the problem:
  P1: tosreeltime.exe
  P2: 1.0.0.0
  P3: 4a769d0e
  P4: WindowsBase
  P5: 3.0.0.0
  P6: 4b5950b7
  P7: a86
  P8: 18
  P9: System.InvalidOperationException
  P10:
  Attached files:
  C:\Users\Tony\AppData\Local\Temp\WER7C9E.tmp.WERIn ternalMetadata.xml
  These files are available here:
  C:\Users\Tony\AppData\Local\Microsoft\Windows\WER\ ReportArchive\AppCrash_tosreeltime.exe_25c5a6496c7 ad44943ce88637e3389e8a80bd45_07f0c745
  Symbol of the analysis:
  Recheck for solution: 0
  Report ID: d5b71327-fc74-11df-a596-00266c333aed
  State: 0
  The event XML:
  
  
  
  1001
  4
  0
  0 x 80000000000000
  
  37886
  Application
  Tony-TOSH
  
  
  
  1223018385
  5
  CLR20r3
  Not available
  0
  tosreeltime.exe
  1.0.0.0
  4a769d0e
  WindowsBase
  3.0.0.0
  4b5950b7
  A86
  18
  System.InvalidOperationException
  
  
  
  C:\Users\Tony\AppData\Local\Temp\WER7C9E.tmp.WERIn ternalMetadata.xml
  C:\Users\Tony\AppData\Local\Microsoft\Window s\WER\ReportArchive\AppCrash_tosreeltime.exe_25c5a 6496c7ad44943ce88637e3389e8a80bd45_07f0c745
  
  
  0
  d5b71327-fc74-11df-A596-00266c333aed
  0
  
  
  My system specs

  Hey,.

  If you get this error Reeltime, you should try Ccleaner. There may be a registry problem and CCleaner might solve this problem. This great freeware and easy tool which you can download here:
  http://www.Piriform.com/

  Check this box!

• Flight Simulator 2004 install stops at 97% say there is an error with the file world.cab

  While the resettlement of fs2004, the installation stops at 97% saying there is an error with the file world.cab, this damaged disc 4.  Someone at - he found a solution to this?

  Thank you

  Well, if, as you say, the disc is damaged. The solution would be to get another drive.

  Although I would have a look at the following:

  Take a look at the following: http://support.microsoft.com/kb/258496

  I hope that, if necessary, you can get a free replacement disc.

• A toolbar with the function showing keys is located at the top of my screen-how to remove

  Original title: function keys
  A toolbar with the function showing keys is located at the top of my screen.  When I click on any of the icons that they do not work.  How can I remove the toolbar of the my computer screen function?

  Hello

  a toolbar with function keys at the top of the screen does not part of vista

  Contact the manufacturer of your computer

• Get "I/o Error" with the 0x8078002A error code when I start a backup.

  * Original title: IO Error Message - I am an amateur

  When I start a backup of my hard drive to my external hard drive, I get an error that reads "I/o Error" with the 0x8078002A error code.  I am a real novice.  I can do either fix it or work around this problem?

  Hello

  Welcome to the Microsoft community.

  Try the steps in these articles:

  Error message when you try to perform a full backup on a Windows Vista-based computer: "" the request could not be performed because of an i/o device error".
  http://support.Microsoft.com/kb/952272
  Note: It is applicable for Windows 7 as well.

  Perform a clean boot:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: After a repair, be sure to set the computer to start as usual as mentioned in step 7 in the Knowledge Base article.

• Updating Win 7 32 Bit to Win 7 64 bit with the same product key

  Hey,.

  I bought a laptop computer where is installed Win 7 Pro 32 Bit. Now, I want to install Win 7 pro 64 bits with the same product key. I have the required software. Is this possible?

  Yes, you can use the same product key to install and activate the 64-bit version.

  You will need to do a clean install, there is no place on the way to upgrade Windows 7 32 bit to 64 bit.

  Using the disk of 64-bit Windows 7, install Windows 7 Windows Easy Transfer Utility from the DVD (to find it, simply navigate to x:\support\migwiz, "x:" is the name of your hard drive. (In this case, you will see a collection of files, the important"that you must search for and double-click is 'migsetup'.) run it and create a DAMP (Windows Easy Transfer file), if you have an external hard drive, you can access it later when you perform a clean install of Windows 7 64-bit disk so you can stored there.

  Once you have done this, just do a clean install of Windows 7 64 bit disc. In Windows 7 64 bit disk, start Windows Easy Transfer, follow the wizard screen, tap on which is stored the WET file (external hard drive) and it will restore your personal files and settings. Reinstall the applications needed.

  http://www.notebooks.com/2009/10/07/using-Windows-easy-transfer-in-Windows-7/

  Boot from the DVD 64 bit Windows 7

  Click Install now

  Accept the license agreement

  When the option is displayed to select a type of installation, click (Custom advanced)

  Select the disk partition where you want to install Windows 7 click Next.

  You will receive the following warning:

  The partition you have selected may contain files from a previous Installation of Windows. If so, these files and folders will be moved to a folder named Windows.old. You will be able to access the information in Windows.old, but you will be able to use your previous version of Windows.

  (At all costs, do NOT click on anything in Format, deletion or Partition name.) So even do a custom installation, your personal files are still kept. Click OK

  The installation program will now begin installation. During installation, your computer will be restarted several times.

  Once the installation is complete, you can complete the Out of Box experience as the choice of your laptop, create a username, password, your time zone. You can then proceed to download the latest updates for Windows and reinstall your applications and drivers.

  You can then retrieve your personal files from the Windows.old folder and reinstall all of your applications and drivers.

  http://notebooks.com/2010/11/09/how-to-recover-documents-music-and-email-after-upgrading-with-the-Windows-old-folder/

• I have windows7 64 bit on a computer acer laptop, but I want to change my OS to 32-bit. Is it possible with the same product key?

  Windows 7 64 bit to 32 bit

  I have windows7 64-bit with the computer acer laptop, but I want to change to 32 bit can it is possible with the same product key?

  If you have a retail version of Windows 7, then it is more than likely came with discs both 64-bit and 32-bit. In this case, boot from the 32-bit disk and do a clean install.

  If the 64-bit version has been pre-installed, then you need to contact Acer to see if they have a 32-bit recovery disc.

• Error offline - we are sorry, but there was a communication error with the server. Please try again and if the problem persists, contact Adobe Techincal Suport...  (INVALID_QUERY: XMLList object)?

  After a number of years of service, my Adobe Premiere CS4 gives me the following error message:

  Error offline - we are sorry, but there was a communication error with the server. Please try again and if the problem persists, contact Adobe Technical Support...  (INVALID_QUERY: XMLList object).

  I use this software on an old Dell desktop computer to two year with many members and drive.  It is a stand-alone application, not connected to a server.

  Anyone have any ideas on how to solve this problem?

  I think it has to do with the central resource is no longer supported.  Everything works OK if you ignore the message?

• I bought the DC of Adobe Acrobat pro and completed the info online, but when I use the cd with the product code key it will not take the code?  What do I do then?

  I bought the DC of Adobe Acrobat pro and completed the info online, but when I use the cd with the product code key it will not take the code?  What do I do then?

  Thanks Anubha Goel, final I got it to work... The serial number in the physical box that you buy in the store wasn't the number for the software.  It was the serial number in the cloud, very difficult to know when you see a serial number in the box with the Cd online.  But thanks for the reply to my post. I'll be in offline mode after clicking on answer...  Thank YOU Ana Maria

• I'm in photoshop and I'm trying to adjust the pressure of my pen. However, I get this sign of error with the sign of exclamation on the side and the pressure is not resolved.

  I'm in photoshop and I'm trying to adjust the pressure of my pen. However, I get this sign of error with the sign of exclamation on the side and the pressure is not resolved.

  
  

  I'm running on Windows 8, I'm using the latest version of Photoshop (2015) and I have a Wacom Intuos tablet. What should I do?
  

  Thanks, I forgot actually download wacom itself. It works now. Thank you!

• communication error with the server. callback failed for the data entry page

  Hello
  
  We have recently applied the corrective update EMP on EMP 11.1.2.0 111.2.1.
  We have following the architecture,
  
  database server: sql server 2005
  Server Foundation (OS = windows server 2008): HSS, EPMA, Manager Calc, EAS, EIS, provider's server, planning
  Essbase Server (OS = windows server 2008): essbase
  
  After you apply the patching EMP 11.1.2.1, we apply after Electrodes for IE 9 compactibility i.e EMP 11.1.2.1.600 patches
  
  1. patch 14119724 (Workspace)
  2 14142678 patch (Shared services)
  3 patch 14224664 (EPMA)
  4 patch 14464109 (planning)
  
  After you apply above patches, all users get error when opening planning web form through the workspace of all client computer.
  
  "* error communication with the server. callback failed for the data entry page. "
  
  
  
  
  When restore us only planning patch 14464109 , issue of "communication error with the server. callback failed for the data entry page "get resolved for all users, but failed for a single user IE"user xyz" "
  
  the user xyz have OS = windows 7 and IE 8
  user xyz can take foundation server RDP can open any form of planning successfully in vain get when doing the basic machine.
  
  I have following question:
  1. Why do we get error "error communicating with the server. callback failed for the data entry page"after you apply the fixes to IE9
  
  2. after cancellation all patches or planning one patch, why the user xyz always get the error but not other users
  
  
  Thanks in advance
  
  Published by: 922755 on June 7, 2013 16:08

  It might be useful to have a read of the following doc Oracle Support - "error:"error Communication with the server. " "Callback failed for the data entry page" when you open a Web form of planning with the members of the Type of text [ID 1392689.1].

  And then this question should be resolved en.600

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• vCenter 4.1/ESXi 4.1 material status "Communication error with the server.

  I am slot that a brand new installation of vCenter with two new installs of ESXi 4.1 connected on it. I use on Dell PowerEdge 2950 s ESXi servers. I tired the customized version of Dell and vmware ESXi vanilla version. My host vCenter is Windows 2008 R2.

  In vCenter, the two server ESXi, any version of ESXi, I run, I get "Communication error with the server" error when I click the tab hardware state. No data appears in the hardware status tab.

  Only suggestion of Dell has been updated with firmware/BIOS on the server level. I did and it did not help.

  Anyone has any suggestions or ideas what would cause this?

  I had exactly the same problem what is to have everyone on this thread.  I finally called VMware support.  It is certainly a problem with Tomcat.  Apparently, during my initial installation of tomcat server vCenter (on a Win2k8R2 vanilla Server / unreleased) na not create a database file.  The vCenter Server uninstalled eventuall tech and went through the Setup again.  For some reason any Tomcat created db it's good the second time.  After installation, it takes about 5 minutes for the db should be created.

  On Windows 2k8R2 it is located here: C:\Program Files\VMware\Infrastructure\tomcat\lib\xhiveConfig\data

  The name of the comic is VcCache-by default-0. XhiveDatabase.DB

  My server didn't have one at all.  The relocation has created, at the beginning it is 0KB in size.  After 5 minutes, it grows up to 25, 600KB.

  Everything in my vCenter works now correctly.  I'm on 4.1.320137

  I hope this helps.

  Dave