communication error with the server. callback failed for the data entry page

Similar Questions

• vCenter 4.1/ESXi 4.1 material status "Communication error with the server.

  I am slot that a brand new installation of vCenter with two new installs of ESXi 4.1 connected on it. I use on Dell PowerEdge 2950 s ESXi servers. I tired the customized version of Dell and vmware ESXi vanilla version. My host vCenter is Windows 2008 R2.

  In vCenter, the two server ESXi, any version of ESXi, I run, I get "Communication error with the server" error when I click the tab hardware state. No data appears in the hardware status tab.

  Only suggestion of Dell has been updated with firmware/BIOS on the server level. I did and it did not help.

  Anyone has any suggestions or ideas what would cause this?

  I had exactly the same problem what is to have everyone on this thread.  I finally called VMware support.  It is certainly a problem with Tomcat.  Apparently, during my initial installation of tomcat server vCenter (on a Win2k8R2 vanilla Server / unreleased) na not create a database file.  The vCenter Server uninstalled eventuall tech and went through the Setup again.  For some reason any Tomcat created db it's good the second time.  After installation, it takes about 5 minutes for the db should be created.

  On Windows 2k8R2 it is located here: C:\Program Files\VMware\Infrastructure\tomcat\lib\xhiveConfig\data

  The name of the comic is VcCache-by default-0. XhiveDatabase.DB

  My server didn't have one at all.  The relocation has created, at the beginning it is 0KB in size.  After 5 minutes, it grows up to 25, 600KB.

  Everything in my vCenter works now correctly.  I'm on 4.1.320137

  I hope this helps.

  Dave

• Error offline - we are sorry, but there was a communication error with the server. Please try again and if the problem persists, contact Adobe Techincal Suport...  (INVALID_QUERY: XMLList object)?

  After a number of years of service, my Adobe Premiere CS4 gives me the following error message:

  Error offline - we are sorry, but there was a communication error with the server. Please try again and if the problem persists, contact Adobe Technical Support...  (INVALID_QUERY: XMLList object).

  I use this software on an old Dell desktop computer to two year with many members and drive.  It is a stand-alone application, not connected to a server.

  Anyone have any ideas on how to solve this problem?

  I think it has to do with the central resource is no longer supported.  Everything works OK if you ignore the message?

• communication error with the server. Please refresh this window

  Sometimes, actually most of the time, when I try to log on to kuler I get this error message "error communicating with the server. (Please refresh this window", and it doesn't matter if I refresh or not I just can't use it.
  I tried to open it in firefox and IE and I get the same error in both browsers. I would really like to be able to use this great feature so please tell me if there is anything I can do to prevent this unfortunate error.
  

  Hello, I'm sorry know you this. This bug has been fixed for the next version, which will be available soon. Details here

  In most cases, if you click on the message or the kuler UI behind the error message, the message should disappear. Then click on the left navigation (themes, create, etc.) and the themes will load. If the connection, try a new browser window, or a new browser, I can usually get in eventually. Thank you for your patience.

  Saami

• Error with the data import CSV in FDMEE file

  Data entry; JOD; No details; No product; Actual spending; ERP; Sep; 2012;-40476487.79

  [WHITE] 01; 71111; 411101; 26101, entering data; JOD; No details; No product; Actual spending; ERP; Sep; 2013;-9670984.005

  [WHITE] 01; 71111; 411101; 26101, entering data; JOD; No details; No product; Actual spending; ERP; Sep; 2014;-43065295.14

  [WHITE] 01; 71111; 411101; 26101, entering data; JOD; No details; No product; Actual spending; ERP; Sep; 2015;-37741827.48

  [WHITE] 08; 71111; 411101; 26001, entering data; JOD; No details; No product; Actual spending; ERP; Feb; 2011;-2186.535

  [WHITE] 08; 71111; 411101; 26001, entering data; JOD; No details; No product; Actual spending; ERP; Jan; 2011; 2186.535

  [WHITE] 08; 71111; 411101; 26101, entering data; JOD; No details; No product; Actual spending; ERP; Apr; 2010;-1107458.244

  [WHITE] 08; 71111; 411101; 26101, entering data; JOD; No details; No product; Actual spending; ERP; Dec; 2010;-969379.839

  [WHITE] 08; 71111; 411101; 26101, entering data; JOD; No details; No product; Actual spending; ERP; Dec; 2010; 5664971.523

  [WHITE] 08; 71111; 411101; 26101, entering data; JOD; No details; No product; Actual spending; ERP; Dec; 2011; 539642.297

  [WHITE] 08; 71111; 411101; 26101, entering data; JOD; No details; No product; Actual spending; ERP; Feb; 2010;-161439.3

  [WHITE] 08; 71111; 411101; 26101, entering data; JOD; No details; No product; Actual spending; ERP; Feb 2011;-265875

  [WHITE] 08; 71111; 411101; 26101, entering data; JOD; No details; No product; Actual spending; ERP; Jan; 2011;-273767.297

  [WHITE] 08; 71111; 411101; 26101, entering data; JOD; No details; No product; Actual spending; ERP; Jul; 2010;-487855.76

  [WHITE] 08; 71111; 411101; 26101, entering data; JOD; No details; No product; Actual spending; ERP; Jun; 2010;-1322401.382

  [WHITE] 08; 71111; 411101; 26101, entering data; JOD; No details; No product; Actual spending; ERP; Mar; 2010;-1339217.998

  [WHITE] 08; 71111; 411101; 26101, entering data; JOD; No details; No product; Actual spending; ERP; May; 2010; - 277219

  Filled lines: 0

  Lines rejected: 438

  2016-01-31 07:57:46, 479 [AIF] INFO: EPMFDM - 140274:Message - MODE ARCHIVE: copy

  2016-01-31 07:57:46, 479 [AIF] INFO: EPMFDM - 140274:Message - Archive of startup files:

  2016-01-31 07:57:46, 480 [AIF] INFO: EPMFDM - 140274:Message - Archive file name: 20120140831.csv

  2016-01-31 07:57:46, 482 [AIF] INFO: EPMFDM - 140274:Message - remove the source file: load7.csv of data

  2016-01-31 07:57:46, 482 [AIF] INFO: EPMFDM - 140274:Message - no deleted files: / u03/inbox/Data load7.csv

  2016-01-31 07:57:46, 493 [AIF] INFO: EPMFDM - 140274:Message - ImportTextData - end

  2016-01-31 07:57:46, 493 [AIF] INFO: EPMFDM - 140274:Message - time taken for import in ms Total = 76

  2016-01-31 07:57:46, 597 [AIF] INFO:

  Import of Source data for the period "Aug-2014".

  2016-01-31 07:57:46, 604 INFO [AIF]: generic data lines imported from Source: 0

  2016-01-31 07:57:46, 605 [AIF] INFO: Total of lines of data from the Source: 0

  2016-01-31 07:57:47, 927 INFO [AIF]:

  Map data for period "Aug-2014".

  2016-01-31 07:57:47, 931 WARN [AIF]: warning: no record exists for period "Aug-2014".

  2016-01-31 07:57:47, 941 [AIF] INFO:

  Scene for period data "Aug-2014".

  2016-01-31 07:57:47, 942 INFO [AIF]: number of deleted lines of TDATAMAPSEG: 0

  2016-01-31 07:57:47, 944 INFO [AIF]: number of lines inserted in TDATAMAPSEG: 0

  2016-01-31 07:57:47, 945 INFO [AIF]: number of deleted lines of TDATAMAP_T: 0

  2016-01-31 07:57:47, 946 INFO [AIF]: number of deleted lines of TDATASEG: 0

  2016-01-31 07:57:47, 948 INFO [AIF]: number of rows deleted from TDATAMEMOITEMS: 0

  2016-01-31 07:57:47, 949 INFO [AIF]: number of deleted lines of TDATAARCHIVE: 0

  2016-01-31 07:57:47, 951 INFO [AIF]: number of lines inserted in TDATASEG: 0

  2016-01-31 07:57:47, 952 INFO [AIF]: number of deleted lines of TDATASEG_T: 0

  2016-01-31 07:57:47, 982 [AIF] INFO: - END IMPORT STEP -

  2016-01-31 07:57:48, INFO 007 [AIF]: - START NEXT STEP -

  2016-01-31 07:57:48, 037 [AIF] WARN: caution: the Import step is not completed for the period August-2014

  2016-01-31 07:57:48, 039 [AIF] WARN: caution: the Import step is not completed for the period August-2014

  2016-01-31 07:57:48, 064 [AIF] INFO: - END VALIDATE STEP -

  2016-01-31 07:57:48, 261 [AIF] INFO: end process FDMEE, process ID: 201

  The period mapping that I create is right

  

  2016-01-31 07:57:47, 927 INFO [AIF]:

  Map data for period "Aug-2014".

  2016-01-31 07:57:47, 931 WARN [AIF]: warning: no record exists for period "Aug-2014".

  You can check your mapping table of the period which has ' Aug-2014 "created since I can't see your attached screenshot?"  If it is already there, make sure that the period is NOT locked.

  Good luck.

  Alex Liu

  E.M.P. freelance architect

• Calculation script on page 2 with the data of page 1?

  I'm missing something simple here. I am wanting to write a calculation script by using the sum of two fields of digital type on page one divided by the sum of two fields of digital type on page two. The only thing that I can go to work is if I do a numeric field on page one and you do the calculation of the sum it. Then, if I move it to page two, it's just empty. What Miss me?

  Hello

  You can do this, you simply reference the fields correctly.

  First of all, make sure that you have named the two pages. Leaving the pages/subforms (and objects) without a name makes it more difficult to reference in the script.

  There is a very practical thing when you are in the Script Editor. Move the mouse over another object and press / hold. The mouse turns into a 'V '. Still holding control, click the object, and LC Designer will insert the reference in the script. It's easy enough when objects are close, so do a bit of practice. If the objects are on different pages, then you need to scroll down to the object you want to reference, enable the Script Editor again and then click the object with the control which was held.

  Here is an example of reference objects: http://www.assuredynamics.com/index.php/category/portfolio/referencing-objects/

  Hope that helps,

  Niall

  Ensure the dynamics

• error message "there is a communication problem with the web server."

  I'm trying to connect to three rivers FCU website www.3riversfcu.org and I get the message error "there is a communication problem with the web server." I am running Windows 7 on Toshiba laptop. No idea how to solve this problem? Something in the settings?

  Hi, Mayhem15,

  See if this troubleshooting help.  It was written for Windows XP, but in many cases, these documents still apply for more recent versions of Windows.

  How to troubleshoot possible causes of Internet connection problems in Windows XP

  http://support.Microsoft.com/kb/314095

• How to fix the error with the code: 0xe7210001 failed to load powrprof, object: cls

  Hello

  Dose anyone know how to fix the error with the code: 0xe7210001, message: unable to load powrprof, object: CLSD-no-it is found;
  OR: Fingerprintsoftware OR error: replicas THotkey.exe message window and the computer freezes

  Maleware scanned and virus, also in safe mode, found no infection, reinstalled driver fingerprint, but nothing has changed.

  grateful for the help!

  Hello

  > message: unable to load powrprof, object: CLSD-no-it is found;
  In my view, this would mean that there is a problem with Toshiba Power Saver
  What laptop Toshiba, you have exactly?

  Maybe reinstall Power Saver could help. You can find it on the official website of Toshiba.

• Communication problem with the printer

  I'm trying to print on a printer Lexmark 1200 series of a Toshiba laptop. Laptop computer identifies the printer is the printer is displayed in the control panel. Whenever I try to print even if I get a message that says: "communication problem with the printer. Any help is appreciated.

  Hi Nick,

  1. What is the exact model of the printer number?

  2 is this problem limited to any specific application such as Internet Explorer, Microsoft Word etc.?

  It seems that some of the 1200 Series printers is not compatible with Windows 7. You can enter the number of exact model and research for more information.

  http://www.microsoft.com/en-us/windows/compatibility/win7/CompatCenter/ProductViewerWithDefaultFilters?TempOsid=win7&Locale=en-us&TextSearch=lexmark%2B1200%2B&Type=Both&CurrentPage=0&TotalPages=1&ShowCriteria=0&SortCriteria=Relevance&Compatibility=Unknown&LastRequested=14

  If the printer is compatible and you are always faced with the question, you can proceed with the steps.

  Method 1:

  Run the troubleshooter and update printer drivers.

  Solve printer problems

  http://Windows.Microsoft.com/en-us/Windows/printer-problems-in-Windows-help#fix-printer-problems=Windows-7&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  Method 2:

  If the problem persists. I suggest you perform the steps described in the article.

  "Communication not available" or "Document Failed to Print" Error Message and the print job hangs in the print queue

  http://support.Lexmark.com/index?page=content&ID=SO4473&locale=en&UserLocale=en_US

  Note: Antivirus software can help protect your computer against viruses and other security threats. Have a computer without any security software can cause a potential danger to your computer. Therefore, make sure to activate the firewall and security software once you are finished with the test.

  Hope this information helps. Response with status so that we can help you.

• Get "I/o Error" with the 0x8078002A error code when I start a backup.

  * Original title: IO Error Message - I am an amateur

  When I start a backup of my hard drive to my external hard drive, I get an error that reads "I/o Error" with the 0x8078002A error code.  I am a real novice.  I can do either fix it or work around this problem?

  Hello

  Welcome to the Microsoft community.

  Try the steps in these articles:

  Error message when you try to perform a full backup on a Windows Vista-based computer: "" the request could not be performed because of an i/o device error".
  http://support.Microsoft.com/kb/952272
  Note: It is applicable for Windows 7 as well.

  Perform a clean boot:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: After a repair, be sure to set the computer to start as usual as mentioned in step 7 in the Knowledge Base article.

• Satellite L350-214 - error with the software Reeltime

  Hello

  I have a Satellite L350-214 with Windows 7 Pro and have encountered an error with the software Reeltime, I uninstalled and reinstalled and still get the error below. Any help or assistance would be great

  Tony Miller

  Log name: Application
  Source: Windows Error Reporting
  Date: 2010-11-30 12:27:58
  Event ID: 1001
  Task category: no
  Level: Information
  Keywords: Classic
  User: n/a
  Computer: Tony-TOSH
  Description:
  Fault bucket 1223018385, type 5
  Event name: CLR20r3
  Answer: No available
  Cabin ID: 0
  Signature of the problem:
  P1: tosreeltime.exe
  P2: 1.0.0.0
  P3: 4a769d0e
  P4: WindowsBase
  P5: 3.0.0.0
  P6: 4b5950b7
  P7: a86
  P8: 18
  P9: System.InvalidOperationException
  P10:
  Attached files:
  C:\Users\Tony\AppData\Local\Temp\WER7C9E.tmp.WERIn ternalMetadata.xml
  These files are available here:
  C:\Users\Tony\AppData\Local\Microsoft\Windows\WER\ ReportArchive\AppCrash_tosreeltime.exe_25c5a6496c7 ad44943ce88637e3389e8a80bd45_07f0c745
  Symbol of the analysis:
  Recheck for solution: 0
  Report ID: d5b71327-fc74-11df-a596-00266c333aed
  State: 0
  The event XML:
  
  
  
  1001
  4
  0
  0 x 80000000000000
  
  37886
  Application
  Tony-TOSH
  
  
  
  1223018385
  5
  CLR20r3
  Not available
  0
  tosreeltime.exe
  1.0.0.0
  4a769d0e
  WindowsBase
  3.0.0.0
  4b5950b7
  A86
  18
  System.InvalidOperationException
  
  
  
  C:\Users\Tony\AppData\Local\Temp\WER7C9E.tmp.WERIn ternalMetadata.xml
  C:\Users\Tony\AppData\Local\Microsoft\Window s\WER\ReportArchive\AppCrash_tosreeltime.exe_25c5a 6496c7ad44943ce88637e3389e8a80bd45_07f0c745
  
  
  0
  d5b71327-fc74-11df-A596-00266c333aed
  0
  
  
  My system specs

  Hey,.

  If you get this error Reeltime, you should try Ccleaner. There may be a registry problem and CCleaner might solve this problem. This great freeware and easy tool which you can download here:
  http://www.Piriform.com/

  Check this box!

• Get "communication error with kernel" message when you try to run a virus scan program

  Get "communication error with kernel" message when you try to run a virus scan program

  Hello

  What antivirus do you use?

  Follow the steps in the article mentioned below and check if this solves the problem.

  
  The error message "error communicating with kernel":
  http://KB.eset.com/esetkb/index?page=content&ID=SOLN2280

• How reslove an error with the dbms_redefinition.start_redef_table command?

  Command:

  BEGIN

  () DBMS_REDEFINITION.start_redef_table

  uname = > "kiku"

  orig_table = > 'pletest3_pn_kiku_api_db ',.

  int_table = > 'pletest4_pn_kiku_api_db');

  END;

  Error:

  Error report:

  ORA-12008: error path refresh materialized view

  ORA-14400: inserted partition key is not mapped with any partition

  ORA-06512: at "SYS." DBMS_REDEFINITION", line 50

  ORA-06512: at "SYS." DBMS_REDEFINITION", line 1343

  ORA-06512: at line 2

  12008 00000 - "error in the path of refresh materialized view.

  * Cause: Table SNAP$ _ < mview_name > reads lines of sight

  MVIEW$ _ < mview_name >, which is a view of the main table

  (the master can be on a remote site).  Any

  error in this way will cause this error when updating.

  For updates of the Rapids, the table < master_owner >. MLOG$ _ < master >

  is also referenced.

  * Action: Examine the other messages on the stack to find the problem.

  See if SNAP objects $ _ < mview_name >, MVIEW$ _ < mview_name >.

  < mowner >. < master > @ < dblink >, < mowner >. MLOG$ _ < master > @ < dblink >

  There is always.

  How reslove an error with the dbms_redefinition.start_redef_table command?

  As I said before, this may be reproduced if the intermediate table is not created correctly.

  SQL> --My database version.
  SQL> ----------------------
  SQL> SELECT * FROM v$version;
  
  BANNER
  --------------------------------------------------------------------------------
  Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - 64bit Production
  PL/SQL Release 11.2.0.1.0 - Production
  CORE    11.2.0.1.0      Production
  TNS for Linux: Version 11.2.0.1.0 - Production
  NLSRTL Version 11.2.0.1.0 - Production
  
  SQL> ed
  Wrote file afiedt.buf
  
    1  CREATE TABLE not_partitioned_tbl AS
    2*  SELECT object_id,object_name,created,owner FROM all_objects
  SQL> /
  
  Table created.
  
  SQL> ALTER TABLE not_partitioned_tbl ADD CONSTRAINT not_partitioned_tbl_pk PRIMARY KEY (object_id);
  
  Table altered.
  
  SQL> CREATE INDEX npt_created ON not_partitioned_tbl(created);
  
  Index created.
  
  SQL> EXECUTE DBMS_STATS.gather_table_stats('SCOTT','NOT_PARTITIONED_TBL',cascade=>true);
  
  PL/SQL procedure successfully completed.
  

  Now, I create the staging table without MAXPARTITION, so not all "created" dates cannot be mapped.

  SQL> ed
  Wrote file afiedt.buf
  
    1  CREATE TABLE partitioned_tbl (object_id NUMBER, object_name VARCHAR2(30), created DATE, owner VARCHAR2(30))
    2      PARTITION BY RANGE (created)
    3      (PARTITION pt_2005 VALUES LESS THAN (to_date('01/01/2006','dd/mm/rrrr')),
    4       PARTITION pt_2006 VALUES LESS THAN (to_date('01/01/2007','dd/mm/rrrr')),
    5       PARTITION pt_2007 VALUES LESS THAN (to_date('01/01/2008','dd/mm/rrrr'))
    6      --PARTITION pt_rest VALUES LESS THAN (MAXVALUE) -- Maxpartition  is commented out intentionally.
    7*     )
  SQL> /
  
  Table created.
  
  SQL> EXEC DBMS_REDEFINITION.can_redef_table('SCOTT','NOT_PARTITIONED_TBL');
  
  PL/SQL procedure successfully completed.
  
  SQL> conn sys as sysdba
  Enter password:
  Connected.
  SQL> ed
  Wrote file afiedt.buf
  
    1  BEGIN
    2     DBMS_REDEFINITION.start_redef_table('SCOTT','NOT_PARTITIONED_TBL','PARTITIONED_TBL');
    3* END;
  SQL> /
  BEGIN
  *
  ERROR at line 1:
  ORA-12008: error in materialized view refresh path
  ORA-14400: inserted partition key does not map to any partition
  ORA-06512: at "SYS.DBMS_REDEFINITION", line 52
  ORA-06512: at "SYS.DBMS_REDEFINITION", line 1646
  ORA-06512: at line 2
  
  SQL>
  

• Flight Simulator 2004 install stops at 97% say there is an error with the file world.cab

  While the resettlement of fs2004, the installation stops at 97% saying there is an error with the file world.cab, this damaged disc 4.  Someone at - he found a solution to this?

  Thank you

  Well, if, as you say, the disc is damaged. The solution would be to get another drive.

  Although I would have a look at the following:

  Take a look at the following: http://support.microsoft.com/kb/258496

  I hope that, if necessary, you can get a free replacement disc.

• I'm in photoshop and I'm trying to adjust the pressure of my pen. However, I get this sign of error with the sign of exclamation on the side and the pressure is not resolved.

  I'm in photoshop and I'm trying to adjust the pressure of my pen. However, I get this sign of error with the sign of exclamation on the side and the pressure is not resolved.

  
  

  I'm running on Windows 8, I'm using the latest version of Photoshop (2015) and I have a Wacom Intuos tablet. What should I do?
  

  Thanks, I forgot actually download wacom itself. It works now. Thank you!