problem with the variation of size control: pen pressure

Similar Questions

• Problem with the first pro effects controls

  Hi, Merry Christmas;

  I have a problem with the keys with the opacity effect in the effect controls panel. the following pictures I think make my problem more clear to understand:

  

  The picture above shows that the opacity of the element of gopro correction control is 100% unless I drank too much champagne, or fully visible on the screen!

  I want to do a transition effect showing the raft, which appear in the window of the following image, which is an Indian granary above the Colorado River.

  My video of the attic I zoomed up to the window they give the impression that enter the attic when I arrive at the moment I start, with keyframes to have

  inside of the attic without an opacity of 100% to 0% at the end of the clip attic. Unless the new champagne is very bad for my health and vision, I would then see the river

  and the raft! Well I did not and it gives me nightmares! What is the problem? I add that having a zoom smooth and regular, I used the effect time remapping in the video for attic.

  The clip of attic is just above the clip from gopro correction and he overlapped by the duration of the selected dissolution of the shown in the image below (I could of course use a resolution here, but I want to save money on an additional effect)

  

  Here is the view with the screen and the opacity of the element of attic at 25%. Normally, the clip of the raft must be visible then! the orange-red to the right of the screen is inside wall of the attic!

  
  

  

  Thanks for your suggestions... Claude

  Sorry guys, I found the reason. My fade is too short! I had put 2 "to fade and seems not sufficient due to the element of the upper layer time remapping effect! Sorry for the inconvenience.

  Claude

• Problem with the mobile Flex list control

  Hello world.

  I have a problem with the list control in Flex mobile.  I need create list in "Flex mobile" and I need that list items must have following structure. a single image, text and then another picture. How do I do this?

  Concerning

  Include a component with a custom converter.

  See the documentation for Flex: http://help.adobe.com/en_US/flex/using/WS03d33b8076db57b9-23c04461124bbeca597-8000.html for more details.

• Problems with the monitor program size?

  Hi all

  I was editing a sequence and things were dandy until the program screen size has changed for children.

  Here's a screenshot if you want to take a look:

  

  Here, plays the same video, but in the source monitor, the width of the screen is longer while the width of the screen of the program monitor is also enlarged and lower.

  Can someone help me get both screens, the same magnification and width?

  They have the same magnification (both on the adjustment) and have the same resolution if that helps...

  Thank you

  videosandrobots

  The sequence settings match the layer source footage?

  You seem to have HD or source on the big screen and a sequence of DV (SD or 4:3 aspect ratio)

• Problems with the resolution and size.

  I tried to send a file to Mule sticker to have some 6 x 6 "die cut stickers made. They cease to me that files are not enough high resolution but looks like they are fine on my end. Any help will be appreciated.

  

  It's hard to be sure of your screenshot, but it seems you have a 6 inch x 3.316 canvas, but that your image itself is much smaller than that and is centered somewhere in space.

• Is there a problem with the maximum size of the RAM for Satellite 320CDT?

  I have a 320CDT Satellite with the latest BIOS (v8.00) and Windows 98 Second edition installed. There are 32MB memory base and a 32 MB module in the single expansion slot. If I change it to a plug-in 64 MB I see that 64 MB of total memory reported, not 96 as expected; the specification for the machine indicates that the admissible maximum memory is 160 MB (32 MB base + 128MB expansion). Does anyone know if there is a problem with the maximum memory size for this model and if there is a solution or workaround? I need to know quickly, in order to decide if I should return the memory module to the vendor! Thanks a lot for any help, Peter

  Satellite 320CDT supports an internal memory of 32 MB and a single slot can be used!
  You can improve it to max 96 MB (32 + 64 MB)
  I found a few old memory modules. You can use the modules SODIMM 144 pin EDO PA2043U 32 MB or 64 MB PA2044U

  Greetings

• Problem with the controls volume/internet on my laptop HP HDX 16

  Hey,.

  I have a laptop of HP HDX 16, around the age of 8 months. I keep having problems with the touch buttons that controls volume, bass/treble and the internet. The buttons randomly disappear by themselves, turn on and off Alternatively my volume/bass/treble from top to bottom and my internet.

  I have updated the drivers for the buttons to quick launch without result. I've also just updated my computer to Windows 7, so my Bios is brand new (the problem started before I updated to 7).

  As you can imagine, get my internet randomly stops and for the black volume screen blocking what I was doing and hang my computer is getting pretty annoying. Any help on this would be surprising.

  Thank you
  Printertron

  I also have the same problem. HDX 16, around the age of 3 months.

  I found to do all sorts of updates the driver, uninstall, System Restore (no), and does not help.

  I'm still on Vista, but when I get my kit to upgrade to Windows 7, I had planned to see if it resolved the problem.

  Technical support HP told me that if a recovery does not resolve the problem, it must be delivered to them, and the band of totality quicklaunch may have to be modified.

  I intend to make the recovery during the holiday season.

  Based on the fact that you got your computer 8 months ago, I assume that you have not used an upgrade kit. Which means, I would recommend doing a recovery before calling the technical support because they will just have to insist that you do anyway.

  An interim solution, when the volume control locks your screen is at the end of the process called "SmartMenu.exe". It will reload the next time that you start your computer.

• Pavilion dv8: problem with Pavilion dv8 (treble/bass control) Windows 10

  I had my Pavilion dv8 for awhile.  I started having problems with the slider treble/bass control. He would sporadically pop-up and begin to change the treble or bass at irregular intervals. He also unplug randomly my wireless connection. I tried to solve the problem by downloading a driver, but the problem remains. At first, it was just a little annoying, fixed by clicking the mouse or pressing the upper button of the internet, but now it of REALLY boring, popping up even as I write this post. But there is no driver for Windows 10. Someone at - it solutions?

  Thank you for your help

  Merah

  Hi @Merah

  Welcome to the HP Forums.

  I would like to take a moment and thank you for the use of this forum, it is a great place to find answers.
  
  If I understand correctly you are facing problem control treble/bass in your laptop.

  I would like to know the number of full model of your laptop so that I can better help you with this problem.

  Thank you.

• Problems with the pen of the Surface Pro 3 in Photoshop CS6

  I used photoshop CS6 without any problem on my old computer that was connected to a graphics tablet.

  However, I recently bought a new computer windows called Surface Pro 3. Everything works perfectly with the trackpad and touch, but I had some problems with the pen of Surface.

  The feather can if support on the Web, but every time I click on something on any windows with the pen, the whole application hangs and I have to click on the task bar of the computer down to unlock the application.

  It is impossible to work like this. Is there a solution for this problem? It is said that the version of photoshop I have is Adobe Photoshop Version: 13.1.2

  If you have Photoshop CS6 version 13.1.2, which is the version of subscription to Photoshop, you shoule Isstall Photoshop CC 2014 on your surface Pro 3.  It will work smoothly on the surface Pro 3 and you will also have the option have to use Photoshop CC 2014 preference 2 x UI to Photoshop UI scaling upward in size on your Surface Pro 3.

  If you have not a subscription perpetual windows CS6 version should be version 13.0.1.3.  In this case the only way to scale Photoshop UI must have windows do. You need to update your registry windows 8.1 database and add an external Photoshop manifest file in your folder of Photoshop CS6.  For Surface Pro 3 pen to work with Photoshop, you must install the device drivers for the NTig the wintab API support pen.

  You will not be able to use Photoshop without a keyboard appear on the windows screen keyboard is too heavy.  You can use a utility like button to create keys to touch Overlay on Photoshop and use Photoshop without keyboard.

  Betweek 2XUI Adobe scaled areas an ise windows resizing windows scaling of the image of scalet differece as well as the Photoshops UI

  

  A couple of key overlat keyboards may look like this

  

• Problem with the volume on Satellite Z30 control - A

  Hello

  I have a problem with the analog output sound on my A - Z30 (internal and line/headphone speakers). If for example I play music I see a clearly weak signal volume on the fader control of volume in my Win 8.1 source volume control. But on the master fader, I get a completely saturated and distorted signal. Even down to the time source and output does not help... it just sounds horrible.

  See: link: [https://dl.dropboxusercontent.com/u/30325547/SoundProblem.jpg] (sorry, it's a German system)

  Here we can see that the (extreme right) music player delivers a signal of low volume, while the master fader (left) receives a 100% volume distorted signal.

  If I use external speakers that connect via USB (Logitech Z305) it works perfectly.

  I have already uninstalled and reinstalled the latest version of the drivers for my sound card. But this problem is very persistent. It seems that something pulls the signal up, but I can't find any control that turns off.

  I'm not completely sure when that started, but it can be connected with the beginning of the use of a USB headset. But I already uninstalled this software once again, but that did not help as well.

  Any idea?

  Thank you very much

  PHILIPPE

  Hello

  According to the specifications of the laptop and drivers available on the Toshiba driver page, this laptop supports the Realtek sound card.
  That's why the Realtek HD audio Manager software should be available in the control panel.

  Realtek HD audio Manager provides different parameters as well as the speaker of the configuration options to get the best sound performance.

  In addition, computers laptop Toshiba are preinstalled with a sound tool DTS/Soft
  This software provides audio improvements in your computer.

  To be honest, I not quite sure what which could affect your sound volume, but the mentioned tools and configuration should be checked permanently m.

• How to solve the problem with the wacom tablet and the polygonal lasso tool. It does not work with a pen.

  How to solve the problem with the wacom tablet and the polygonal lasso tool. It does not work with a pen. I have install windows 10 and fresh, new drivers for wacom bamboo, could he makes problems or there is a problem of photoshop?

  It should do.  You use one of the buttons of pen maybe?  Just touching wheels with the pen with no buttons or modifier keys.  Press ENTER to close the selection.

  Personally I never use the lasso, Polygonal, but rather just the Lasso tool by using the ALT (Opt) to operate the Polygonal tool.  I also use the mouse instead of the Tablet for the selection of cutting edge.  It is a little too uncertain where the point will go when hovering the stylus above the image.

• Problems with the photoshop pen pressure, please help!

  I have problems with the stylus pressure sensitivity. My drawing tablet works great and fits perfectly, but photoshop can't detect the pen pressure. The Tablet I have is a brand new turcom ts-6580.

  Yes, I tried their website and had no luck. I searched online to understand this and apparently this tablet has the same drivers as the tablet of the Oh, I guess that they were made by the same company. I sent an email to remember on this subject and they sent me a link to download the latest version of the driver.  Once I pulled the program and checked "TabletPC support." Photoshop has begun to recognize the pen pressure.

• Problem with the size of ExtendedMap.xml

  Data Modeler 3 Production version.
  
  The logic model has about 70 of the entities and relationships, and about 6-7 fields by entity.
  Apart from the logic model, there is only one relational (Oracle 11 g if that's important) which is empty at the moment.
  
  ExtendedMap.xml takes about 7 MB in this configuration. It may not be a problem in itself, but it does not fit in our VCS ("too big").
  The question is: is this a normal size for this file or there is a problem with the design or something?
  
  I would like to know, if I can change the template in some way to solve this problem, before I asked an adjustment of parameters of SVN.
  
  Thanks in advance!

  You can remove it if there is no mapped relational model to logic. It will be restored on save next (small) and you can commit.

  Philippe

• Problem with the tool photoshop pen and little

  Hello, I have a problem with the tool feather of Photoshop cs5. I can barely see paths im making. Is it possible to fix it?

  Isee the pen tool paths im how's it's just makes it miserable to use this tool:

  http://ImageShack.us/photo/my-images/18/85169959.jpg/

  You can barely see the paths (I did a few trails to show the photos.)

  Secondly, in the bottom of the file it says "Exhibition in 32-bit only", even though I have windows 7 64-bit and 64-bit photoshop cs5.

  How to solve these problems?

  Thank you.

  The thing that says 32-bit exhibition (has nothing to do with what version of cs5 your use) could be here because you have already opened or created a document in 32-bit/channel mode.

  You can change what appears here by clicking on the little arrow and choose something else.

  

• Problem with the font size, appears as expected.

  I've been struggling with this for a few weeks now, but surely must is close to solved it. It's just a problem with the size of the police to just that one page.

  http://www.kgngroup.NET/logos_and_packaging.html

  I want the body of the text to be 10px, but after two weeks, played with all conceivable means, change the font size of the body in CSS and the document itself. I have the consultation in Safari, but others on Windows machines tell me it is out of whack.

  My main problem is that I can change the size of the font in the extreme, but he always appears as the same size in the browser (about 12px.) I don't know can be changed because I can change the wording and change online. It's just a problem with the font size. Oh, and in the third column, the one on the right in Dreamweaver, the font looks like it of tiny, can't even read, but in the browser, as the style11 is applied, all three columns search size equal.

  Don't know where to go from here. I want to just that the police of the up to 10 pixels.

  TIA,

  Ken

  I guess this is a follow-up of your thread earlier

  http://forums.Adobe.com/message/3627681

  What would really help in the diagnosis of the subjects such as this is to install the Firebug add-on for Firefox (as suggested in the previous thread).

  Firebug shows you visually what CSS rules apply to any element you click on the screen.

  In this case, you have a confusion of the CSS cascading over each other font sizes and who is confused by the mix of units without real reason. .style11 is unnecessarily applied to many people

  Tags. Remove these classes and to remove the rule.

  for example

  The tiny font in the RHS column is the first affected by

  {.style8}
  font size: 0.5em;
  }

  affecting thethen by

  .style11 {size are: 75 %}}

  affecting the

  tag.

  Result = tiny text (about 2px).

  In these cases of mass confusion, my approach is to remove all the sizing of fonts in the CSS and start over.

  Avoid %. Use px.

  Apply font sizing rules logically from thelabel facing downwards.

  That gives you a solid basis without strange effects.