Error with VideoPhoneLabs.mxml. Please help - any help is appreciated!

Similar Questions

• ERROR 0 X 80240009 PLEASE HELP

  error 0 x 80240009 Please HELP

  Hey,.

  I am running VISTA HOME PREMIUM 32-bit (SP 1 is installed) and I always had problems with windows update. I wanted to install service

  Pack 2 a long time ago, but it has not been successful - by saying that the system was not ready for it, and as he told me I went to the UPDATE of the SYSTEM

  PREPARATION TOOL (KB947821)... and I ran, and it showed: press OK TO INSTALL HOTFIX for WINDOWS KB947821, when ok is

  clicked, after about 5 seconds, an error saying: ERROR 0 x 80240009! now, I'm desperate to install SP2 that some applications require! PLEASE

   

  Help!

  Véronique, INDIA (16 yrs) (I swear I want to join microsoft one day!)

  Hi SakethS,

  Step 1:

  Try to solve this problem with boot.

  See the following Microsoft KB article:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135

  Note: After a repair, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

  Restart your computer and let any other window update of full operation.

  Step 2:

  This see below article provided Windows Help and search for the question.

  How to reset the Windows Update components?
  http://support.Microsoft.com/default.aspx/KB/971058

  Thank you, and in what concerns:
  I. Suuresh Kumar - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  

• I use xport 360 and I can't put my save game back on the program profile it shows a circle with a cross please help me

  I use xport 360 and I can't put my save game back on the program profile it shows a circle with a cross please help me

  Hello

  If you try to recover the gamer tag, then I suggest you follow the steps from the link below: http://support.xbox.com/en-us/pages/xbox-live/how-to/xbox-live-account-management/gamer-profile.aspx

  If this does not work then I recommend you to ask your question here: http://forums.xbox.com/xbox_forums/xbox_support/default.aspx

  Hope this information is useful.

• master password bios for hp mini 1151 with code 2MC92472WZ please help. THX

  master password bios for hp mini 1151 with code 2MC92472WZ please help. THX

  Hello

  Try to enter: 74eo7vx7d0

  Kind regards

  DP - K

• I can't convert pdf to word... always get error... Please help

  I can't convert pdf to word... always get error... Please help

  Hi jamiec78954247,

  Try to use the https://cloud.acrobat.com/exportpdf online service

  Let me know how it goes.

  Kind regards
  Nicos

• Error Code 43 with Nvidea GTX650, please help

  Hello, I currently just bought a Nvidea GTX650 graphics card, I installed all the drivers according to the instructions to however I am unable to access all the games. I explored this further and entered my Manager device and found that my Nvidea GTX650 has an error code 43 for him. I tried the uninstall/install/upgrade to update all the drivers but no luck, please help :)), here are my system specs.

  map of mother Foxconn h61mxl-k

  Nvidea EVGA Gtx650 2 GB GPU

  4 gb ddr3 RAM

  650ub ATX powersupply

  Processor Intel Pentium G620 2.60 GHz

  Windows 7 operating system

  any help would be appreciated thanks.

  Hello

  As you have tried all possible steps and still the problem persists, I would say to contact Nvidia support team check what they have to say on this issue.

  You can also view Code 43: Windows has stopped this device because it has reported problems

  It will be useful.

• MuseJSAssert:Error calls the function selection: TypeError: cannot get the "init" reference to undefined property or no, I am a beginner and not able to solve this problem with my website, please help...

  Everytime I open my site I get this error "MuseJSAssert: Errot calling function selection: TypeError: cannot get the"init"reference to undefined property or null" and I was a newbie am not able to solve this problem.

  

  I did take all measures please help.

  Hello

  Can try you it on another browser that the problem does not come up on top of our end.?

  Kind regards

  Akshay

• weird problem with new screen, please help

  Hello people,

  I hope someone can help. I am using windows 7 Home premium and I hope it is a simple solution that someone has met before. It's just that I don't know how to describe it so can't type into google to find an answer.

  This happens in all programs, Firefox, ms word Opera, basically any window I opened. The bar menu at the top of the screen is a transparent white color and everything works well, but after 50 or 60 seconds, it turns into a transparent, I can still read the Word editing, display etc. file. This is where the scroll wheel on the mouse and what I'm typing stops working. When I type something with the mounted volume, all I hear is a single beep whenever I tap on a button, but nothing is actually typed. Now, all I have to do is click anywhere in the window and it works again, but only for 50-60 seconds. I had to click on the screen twice since I started typing this because when I look at the screen, everything I typed is not there because the menu bar's transparent again while I was typing. Its driving me crazy.

  I don't remember what is a problem before, if it was I would have surely noticed. The only thing that has changed is I had been using my 32 LCD TV as a screen for a long time, but I moved and did not bring my TV with me, so I use the PC came with the computer screen. It's a PC I bought my sister a few years ago so I never used the PC screen that comes with it so don't know if it happened when she or what, she has, she can remember either. I have a updated driver, did not work. Changes the settings in customize and cannot do it helped either.

  Monitor: monitor LCD Compaq CQ1859

  Do I something pressed or clicked on something by accident?

  Is there a setting some part that I forgot?

  I plan to cast the spell by the window, its really annoying.

  Please help guys and ladies.

  Hello salamander.

  Please contact Microsoft Community.

  I can understand the inconvenience caused, be assured that we are here to help with your concern.

  1. What is the model of the computer and do ?
  2. Do you see an error message when the menu bar is transparent?

  Please follow the link below and include a screenshot in your post,

  http://answers.Microsoft.com/en-us/Windows/wiki/windows_other-windows_programs/how-to-include-a-screenshot-in-your-post/2594b08e-32a3-476A-85A6-b021181be7e4

  I suggest you follow the methods below to see if it helps.

  Method 1:

  Clean boot: to help troubleshoot error messages and other issues, you can start Windows by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.  Here is the link for your reference perform the clean boot.

  http://support.Microsoft.com/kb/929135

  Important: please go through the section: How to reset the computer to start as usual after a clean boot troubleshooting section of Kb to start the computer to a normal startup after you fix the problem.

  Note: If the problem persists, continue with method 2

  Method 2:

  Check the problem by disabling the Aero transparency feature. Please follow the steps below to disable the Aero transparency feature.

  1. Right-click on a vacuum of space on the desktop and click on personalize.
  2. Click on the link to the color of the window at the bottom of the window.
  3. Uncheck the check box enable transparency to disable transparency and check the issue.

  For more information, aero feature please refer to the link below.

  http://Windows.Microsoft.com/en-us/Windows7/what-is-the-Aero-desktop-experience

  Note: If the problem persists, continue with method 3

  Method 3:

  A Malware - scanner The Microsoft Security Scanner is a downloadable security tool for free which allows analysis at the application and helps remove viruses, spyware and other malware. It works with your current antivirus software. Please follow the steps below to use the scan to Microsoft Security.

  • Run the scanner from Microsoft from the link below:

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  • Click on download now and click Run.
  • Choose complete system scan and wait for the full analysis.

  Important: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  The above information was hoping to get useful, please return it to us if you need additional assistance.

• Blue Screen errors and random crashes, please help!

  Hello, I built a computer about a month back, and now, whenever I try to play games and talk on Skype/teamspeak all crashes saying that nothing does, and when I try to open another program it crashes instantly and now I get random blue screens. Here's the code for the blue screen: STOP: 0X0000007E (0XFFFFFFFFC0000005, 0XFFFFF80002E9CBFI, 0XFFFFF880009A99D8, 0XFFFFF880009A9230) I look at the time and make sure that nothing is overheating, but it sews blue screen randomly, I tried to install windows debugging tool, so I can see the dump file, but whenever I try to install it, it says installation failed, it's my only computer, and I need it for school help Please.    Also, when I got this computer ready to go, I took the hard drive from my old computer and transferred the files and some games.

  System Specs:
  NZXT Guardian 921 RB black, blue LED
  Two Green Logisys sound active Cold Cathodes
  AMD Phenom II 970 x 4 3.5 Ghz
  Zalman CNPS9700 LED blue 110mm 2Ball CPU Cooler
  HIS Radeon HD 5670 Itceq
  OCZ ZS 750w ATX POWER supply
  ASUS M5A97
  8 gb Corsair Vengeance 240 pin 1600 mhz
  1 TB Seagate Barracuda 7200 RPM
  Windows 7 home 64-bit

  Looks like you may have a virus or other malware. Get your updated antivirus program and boot into Safe Mode. Note that some viruses can hide from your normal antivirus program, so you really need to scan in Safe Mode. To enter in Safe Mode when you turn on first, press F8 on every seconds until you get the menu, and then select Safe Mode. Then run a complete system scan.

  -

  Microsoft has suggestions and offerings to

  http://Windows.Microsoft.com/en-us/Windows7/how-do-I-remove-a-computer-virus

  -

  Moderator Forum Keith has a few suggestions along this line to

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-performance/Windows-Explorer-has-stopped-working/6ab02526-5071-4DCC-895F-d90202bad8b3

  -

  If that suits him fine. If this is not the case, use system restore to go back to an earlier date at the beginning of the problem. To run system restore, click Start-> programs-> Accessories-> System Tools-> system restore. Click on the box that says show more restore points.

  -

  You can check the corrupted system files. Open an administrator command prompt and run SFC if the above does not help. Click START, and then type CMD in the search box, right-click on CMD. EXE and click run as administrator. Then, from the command prompt type sfc/scannow.

  -

  Finally if all else fails, you can look at the rather cryptic system event log. To make, click Start-> Control Panel-> administration-> event viewer tools. Once in Event Viewer system log-click and scroll entries looking for these "error" with indicator see if you can find guidance on where the problem may be.

  `

  I hope this helps. Good luck.

• Date field (not not mandatory) causing an error... Please help!

  Hello, I'm a beginner when it comes to ColdFusion could someone please help with this question?

  I have a field date in my application which is not necessary, I want that the users have the choice to leave this field blank.

  Here's a breakdown of what I have in progress:

  On the add/edit page:

  < component cfinvoke = 'test '.

  method = 'get '.

  ReferenceNumber = '#URL. "RefIDNum #

  returnvariable = "record" >

  < cfset ThisIsTheDateField = DateFormat (record. ThisIsTheDateField, ' MM/DD/YYYY') >

  < cfform action = "process.cfm" >

  < cfinput type = "Text".

  name = "ThisIsTheDateField".

  value = "" #ThisIsTheDateField # ""

  message = "ThisIsTheDateField must be a valid date."

  required = "no".

  validate = 'date '.

  validateAt = 'onSubmit '.

  size = "50".

  MaxLength = "10" >

  On process.cfm:

  < name cfinvokeargument = "ThisIsTheDateField."

  value = "#DateFormat (FORM." ThisIsTheDateField) #">"

  On the SWC's Page:

  <!--> method arguments

  < cfargument = "ThisIsTheDateField" name

  Type = "date".

  required = "no".

  Hint = 'Field ThisIsTheDateField' >

  The value for this field of application:

  #CreateODBCDate (ARGUMENTS. ThisIsTheDateField) #.

  The error I get is:

  Error occurred while processing request

  The THISISTHEDATEFIELD argument passed to the add function is not of type date.

  If the component name is specified as a type of this argument, it is possible that a file of the component definition is not found or is not accessible.

  The error occurred in E:/site/test.cfc: line 56

  54:

  55: <! - add a record - >

  56: < cffunction = name 'Add '.

  57: returntype = "boolean".

  58: index = 'add record' >

  I need a way to make this field accepts empty input... when I leave the field blank, I get the error above.

  Thank you!
  

  
  

  ear,

  If you want to use an optional argument in your function, you must be able to check whether or not a value for the argument had passed.  Use IsDefined ("arguments. ThisIsTheDataField') for its determination:

  Looks like you can also consult the documentation on Coldfusion functions here (http://help.adobe.com/en_US/ColdFusion/9.0/Developing/WSc3ff6d0ea77859461172e0811cbec22c24-7ff3.html).

• Slaughter of BG sound with another class please help!

  Hey hope someone can shine a light on this for me, been stuggling with that for awhile now.

  I had a background sound to play, which is in a separate category codes:

  Class: screen_Control

  public function randonizer_SND (): void

  {

  var r: int = Math.floor (Math.random () * 17);

  if (r == 1)

  {

  currentBG_SND = snd1_BG;

  }

  if (r == 2)

  {

  currentBG_SND = snd2_BG;

  }

  if (r == 3)

  {

  currentBG_SND = snd3_BG;

  }

  if (r == 4)

  {

  currentBG_SND = snd4_BG;

  }

  if (r == 5)

  {

  currentBG_SND = snd5_BG;

  }

  if (r == 6)

  {

  currentBG_SND = snd6_BG;

  }

  if (r == 7)

  {

  currentBG_SND = snd7_BG;

  }

  if (r == 8)

  {

  currentBG_SND = snd8_BG;

  }

  if (r == 9)

  {

  currentBG_SND = snd9_BG;

  }

  if (r == 10)

  {

  currentBG_SND = snd10_BG;

  }

  if (r == 11)

  {

  currentBG_SND = snd11_BG;

  }

  if (r == 12)

  {

  currentBG_SND = snd12_BG;

  }

  if (r == 13)

  {

  currentBG_SND = snd13_BG;

  }

  if (r == 14)

  {

  currentBG_SND = snd14_BG;

  }

  if (r == 15)

  {

  currentBG_SND = snd15_BG;

  }

  if (r == 16)

  {

  currentBG_SND = snd16_BG;

  }

  playSND();

  }

  public function playSND (): void

  {

  snd_BG_Channel = currentBG_SND.play (0,1);

  snd_BG_Transform.volume = 1;

  snd_BG_Channel.soundTransform = snd_BG_Transform;

  snd_BG_Channel.addEventListener (Event.SOUND_COMPLETE, nextSnd);

  }

  nextSnd(event:Event):void of the public service

  {

  randonizer_SND();

  }

  Is what I try to achieve this sound to stop playing when a "button" is linked and then start playing again back in the main screen.

  The "button" is controlled in a different category, and when I try to put a stop function there is to the sound I have the following error:

  1119: access of property may be undefined snd_BG_Channel through a reference with static type class.

  This is the code I use to try to stop the channel:

  screen_Control.snd_BG_Channel.stop ();

  If you have an idea of what I'm doing wrong please help!

  THX pavel

  Did you check this line? public var snd_BG_Channel:SoundChannel;

  Must be:

  public static var snd_BG_Channel:SoundChannel;

• Card problems or video driver with a N200, please help!

  I have a lenovo 3000 N200, that's really cool, works even at games very well, including the most recent.

  But, is it normal that the pilot program display for freeze-out in Warcraft 3? He always does that when you access the list of cards in the game and after 3-5 minutes during a real game. It defines the resolution up to 640 X 480 (from 1280 X 800) and in 16 colors. I have to reset it to get it to work. Also, it does the same thing in Spore - if after seeing the pilot written for Spore installed, (that I downloaded from the lenovo site) I have not encountered this problem far. In addition, Second Life stops - Fortunately it does not freeze the drivers. I understand that the model I have is not designed for the game, but if it can run Warhammer 40 k: Soulstorm with graphics settings meduim (on the widescreen) without a lagg I do not understand why it would not be able to manage warcraft 3 - even a m200 express ATi can manage. I mean that a X 3100 to Intel must be much more powerful. (ATi said card lagg with older games like Unreal Tournament)

  I have the latest version of the - official - driver and a Win Xp pro Sp2. I always keep my system updated - register for Essilor, but until this driver has not need sp3 - and cleaned viruses.

  Please help me?

  Ooh, it seems that I was right, my problems stems from the incompatibility of the software.

  Namely the based opengl driver (this igfx something of the file that is in the rror reports I receive).

  I solved the problem with Warcraft 3, you have to click with the right button on the icon of warcraft 3 and type the destination line (just after the second "")-opengl or - swtnl. (or - d3d, nota bene, who has not worked for me)

  Although even now it's not as pretty as on my table top pc, it works fine and farily good graphics.

  I think your problem is similar to mine and is amplified - sort of - by Vista somehow, it seems to cause a more severe software incompatibility.

• Download error in CC. Please help me!

  Why is the error?

  

  They operate all the functions except Apps

  I have a license for a single product - Adobe Muse

  I tried to uninstall all Adobe via AdobeCreativeCloudCleanerTool

  It does not work

  Please, help me!

  1. close the session for creative cloud application

  2 kill all processes through Adobe in the Task Manager

  3. WIN + R - %LocalAppData% - enter records - Adobe - REMOVE AAMUpdater and OOBE

  4 C: Program Files (x 86) / Adobe - delete or rename the folder Adobe Creative Cloud

  5 C: Common Files / Adobe - delete or rename a folder AdobeApplicationManager

  6. download and install Adobe Application Manager

  7 run the creative cloud and log in again

  Good luck to everyone!

• Problem with clips nested, please help!

  Help, please!
  
  I have a movieclip symbol, let's say, a ball that bounces with a stop(); action on frame 14.
  
  And I have another movieclip symbol which has a text that cross the screen with a stop(); action on the frame of 10.
  
  The main time line, I would like to that ball to start bouncing on frame 2 and stop frame 15, so I placed it on its own layer with a keyframe on frame 2.
  
  I want, the symbol of the text to start on frame 6 and stop on frame 15 also, so I placed it on its own layer with a keyframe on frame 6.
  
  It does not work.
  
  When I play it back, the Visual jump wildly back and forth between the symbols.
  
  What should I do?
  
  I work in Adobe Flash CS3. ActionScript 3.0, 30 frames per second, Player 9 (not sure if this is relevant, but just in case).
  
  Please help me, I'm desperate, I can't understand it.
  
  Thank you!

  Hello

  I'm so clear with what you're saying...

  You have a movieclip that has its own animation of scenario of a bouncing ball and it stop on chassis 14? Even with text movieclip - he has his own animation of script for simple horizontal interpolation that ends on the frame of 10?
  And you placed these clips on the stage, put them on their own layers and moved the mc of ball to frame 2 and the text in the box 6 mc?

  Are there blank keyframes before the frame 2 on image 6 of the text layer and layer of ball? If not, then select frame 1 layer on the ball and press F7 to make an empty keyframe. Do the same on the text layer but select images 1-5 and click F7 to make them blank keyframes.
  What you don't want to do, is show the movieclip before the beginning of their animation. Therefore, you get the wild flashing.

  Also extended these layers to frame of 15 images? Otherwise, click on frame 15 (for the two layers) and press F5 to add frames.

  And you order stop() on plot of 15? Otherwise, create a new layer, call it actions and put a stop() on frame 15 command.

  Sure that your movie will play correctly now.

  NOTE: Just out of curiosity - why don't simply animate you everything on the main timeline?

• Win 7 machine when lightroom and ps will install always fails about 43% with 21 errors... Please help

  I downloaded both programs and they still fail about 43% with 21 errors... any ideas tried closes all windows did not help... using the grace of windows 7

  Hello

  Please see the following links:

  Error download or update Adobe Creative Cloud applications

  Failed installation. Error U44M1P7 | Updates

  Troubleshoot installation with the log files. CS5, CS5.5, CS6

  Kind regards

  Bani