[Front Panel Window-> Open] Scripting VI property is not listed.

Similar Questions

• When you try to import a .mp4 file in windows movie maker, the program does not list the file when I search for it in his file.

  When you try to import a .mp4 file in windows movie maker, the program does not list the file when I search for it in his file.  Help, please.

  As I suggested previously, conversion to a format like
  . WMV before you import it into Movie maker may be the solution.

  The free Converter from Microsoft can be a place to start:

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  Download Microsoft Expression Encoder 4 with Service Pack 1 (SP1) (freeware)
  http://www.Microsoft.com/download/en/details.aspx?displaylang=en&ID=24601
  (runs under WinXP SP3 / Vista / 7)

  When you install the program...
  Start Microsoft Expression Encoder 4
  (Start / programs / Microsoft Expression /)
  Microsoft Expression Encoder 4)

  On the "Load a new project" screen...
  Left click... "Transcoding project '...

  When the program opens, click on... File / import...

  (If at any time you get lost while browsing
  the program of... to... Window / active Reset
  Type or workspace... CTRL + SHIFT + R)

  Look for the file/s that you want to convert.
  (If files do not appear... open the fall
  window and choose... All files)

  Click (highlight) left the files and the left on the Open button.

  You can see the files in the "Multimedia content" pane

  In the right column... left click on the tab "Output"...

  Open the drop directory window and choose an output folder.
  (This is where you will find your converted file)

  On the left, click on the button "encode".

  Wait... video encoding CPU intensive and can
  be a slow process. It is always best if you do not have
  multi-task while files are encoded.

  Now... try import you again. File WMV in Movie Maker.

  More converters:

  There are to many converters available on the net...
  the following links are some examples. You can
  need to experiment to find the best result.

  Proceed at your own risk *.

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  (1) format Factory (freeware)
  http://www.videohelp.com/tools/Format_Factory
  (the 'direct link' is faster)
  (the file you want to download is: > FFSetup270.zip<>
  (FWIW... installation..., you can uncheck
  'all' boxes on the last screen... even in this case, it may
  install the Ask toolbar on your system)
  (Windows XP / Vista / 7)

  First, you will need to decompress the file or just open the
  Drag FFSetup270.exe out of the folder
  and drop it on your desktop. To install left click.

  (2) Freemake Free Video Converter (freeware)
  http://www.Freemake.com/free_video_converter/
  (Windows XP / Vista / 7)

  (3) Koyotesoft Free Video Converter
  http://www.koyotesoft.com/indexEn.html
  (2000/XP/2003/Vista/Seven)

  (4) Sothink Free Video Converter
  http://www.Sothinkmedia.com/video-converter/
  (Windows XP / Vista / 7)

  (5) hamster Free Video Converter
  http://www.PCWorld.com/downloads/file/FID, order 155794, 4 pages, 1/download.html
  (Windows XP, Vista, 7)
  (If you choose Custom Installation
  You can uncheck additional modules you
  do not want to install)

  (6) quick Media Converter
  http://www.Cocoonsoftware.com/
  (Win XP, Vista, Win 7 Home Premium)

  (7) SUPER © Simplified Universal Player Encoder & Renderer
  http://www.videohelp.com/tools/Super
  (the download mirror site is faster) (Windows XP / Vista / 7)

  (8) Xilisoft Video Converter
  http://www.Xilisoft.com/video-converter.html
  (not freeware but receives good reviews)
  (Windows XP (SP2 or later) / Vista / 7)

  Good luck...

• I have a Windows XP Home Edition, which does not list if it's 32-bit or 64-bit

  I have an OEM Windows XP Home Edition, which does not list if it's 32-bit or 64-bit. How do I know what

  To check if your XP operating system is 64-bit, you only have to right click on "My computer" and select 'Properties' to display 'system properties '.   If your XP operating system is XP Professional 64-bit, 64-bit will be indicated in the information displayed in the general tab.  However, XP 32 bit operating systems won't have 32-bit, there is no information about this particular point at all.  The XP Home Edition will be 32-bit, but this information does not appear.  XP Professional, however, can be either 32-bit or 64-bit.  If it is 64-bit, it will be indicated on the general tab of the system properties. However, if it is XP Professional 32-bit, nothing is there to indicate that the operating system is 32-bit.

  Vista and Windows 7, unlike XP, OS will indicate if they are 32-bit or 64-bit.

• feature request - alignment of the execution of the front panel window

  I would like he's had a "pair of coordinates", marked by two positions on the Panel before which would serve the rectangle to display at the top left and bottom right positions itself for my front panel when executing. Then I wouldn't have to worry about the State of my eyes when I left edition.  I could simply mark the limits of the display and be assured that all the controls and indicators that were intended to be seen at runtime, would be visible and properly aligned with the window of the group.

  I advise you to take a look at this blog post, that addresses exactly your problem.

  It is the functions of the toolkit OpenG VI Fit window largest decoration.

  Tone

• Activate Windows XP window opens but activation options are not loaded

  Recently, I installed a second HDD in my system and had no problems for the last three days. When I started my computer this morning, he said that my hardware configuration has changed and I need to activate windows. When he asked if I wanted to activate Windows now, I clicked Yes and "Activate Windows" open window, but there is no option loaded (like internet activation and activate by phone). So, if I could not activate Windows.

  The window load the blue background with the watermark of the keys and nothing else. The small orange line around the bottom of the page does not move (I don't know if it's supposed to). I opened the window several dozen times and have tried leaving the window open for a few hours with no result.

  I have tried to delete the second HDD and looked at similar positions. I also tried the solutions involving reinstalling IE8. I tried another solution involving the boot in safe mode with command prompt and run "rundll32.exe syssetup, SetupOobeBnk' making my days to activate the increase from 3 days to 30 days. And I tried running "oobe/msoobe / has" which has just opened the window "Activate Windows", that still does not solve my problem since the options to activate wouldn't load.

  For any help or suggestion would be appreciated.

  There is no options under settings on the Advanced tab of the "Internet Options" dialog box in Windows Internet Explorer 7
  http://support.Microsoft.com/kb/928849

  JS
  http://www.PAGESTART.com

  Never be afraid to ask. This forum has some of the best people in the world to help.

• Some random windows remain in front - new windows open in the background

  Hello

  I have a very annoying and recurring question: one or more windows of my session always remain at the top of others. She does not always affect the same software (I've experienced with Chrome, Visual Studio, Windows Explorer, MS Word, MS Excel, notepad...). Sometimes a single window is affected, sometimes 2 or 3 (as 1 word document, chrome and 1 explore window). I think this is a Windows problem, because it is not logical that all these software would default at the same time, with no repeatable behavior.
  If I open a new window (Notepad, calculator, internet room to connect to this Internet site, Panel, etc) it will be displayed in the background, so the only way that I have to see him (or even know it's here) is to reduce all windows until I find the one I want. If I select using the bar of tasks, or alt + tab, it presents in the face, but as soon as I let go of the mouse button / key, windows 'stay face' returns. If I drag a new window to a position of the screen where a defective window, he is dragged behind it (even if I focus on that).
  I first thought that I had a session corrupted, so I created a new one with the new username etc, but the problem is the same. I did some research and it seems to be a well known since Win98 problem, so I tried several "tricks" supposed to work (change the behavior to 'combine' or 'lock' bar tasks, use/not use aero peek, remove all software pointing device running, run a windows update, change the ForegroundLockTimeout setting...). Either the "fix" doesn't work at all, or it does for only 20 to 40 minutes (just enough for me to notice it's gone and you can enjoy the normal use of a computer...), before returning.
  I hope my description is clear enough for you, the experts to understand what the problem is and give me a solution.

  Hello

   
   
  I also suggest you to download and run the latest Microsoft Scanner on your computer and check to see if it helps:
   
  http://www.Microsoft.com/security/scanner/en-us/default.aspx
   
  Note: data files that are infected must be cleaned only by removing the file completely, which means there is a risk of data loss.

• What is the connections on the front panel for an E9180T, other responses does not apply?

  I have an E9180T Pavalion, which I placed it in a box more grand for better cool (Diabilotek), but cancel it, HDD LED, Power LED, Reset Switch and power switch does not seem to match others listed so far. When hung using these pages the button restart gives me just a blank black screen. using the power to the bottom/Power switch that causes the system to boot normally.

  This forum can now be cancelled, problem is resolved, these problems were caused by wires in the harness front of Diablotek. HDD LED wires are wired to the switch led Reset, the reset switch is connected to the power LED and the power led is connected to a Molex connector. It's a question that I will take with tem. Thanks for all your answers

• cRIO, Webservice (REST) and front panel

  Hello

  I created a few simple webservice screws for greater application that runs on a cRIO. The webservice screws can be used to send simple commands to the application and give your feedback. So far, I used a LV frontpanel for interaction with the system, but for several reasons, I am looking for another way to do it.

  It worked well in the development environment. After deployment webservice screw they have communicated with the application according to the needs and I am able to control the system using simple URL typed in the browser's address bar. Later, I will add static content, but for debugging, it is fine.

  The thing is that now I have compiled and deployed the application, and now when I try to open the front panel I get this error message:
  "VI requested is broken and cannot be read or controlled."

  Previously I did not use the Web OR Application Server, so I installed to use the web services. Are there conflicts between a Web application server and remote server Panel? Any suggestions on how to proceed?

  I use LV 2012 and NI RIO 12.0

  Best regards

  Simo

  Hi Simo,

  If I understand correctly, you have the following configuration:

  cRIO with a Web Service of LabVIEW and several Web Service screw

  Some ways to debug deployed screws of LabVIEW Web Service are:

  You can have the Service of the Web of LabVIEW deployed in debug and debug remote Web Service of LabVIEW desktop.

  You can use a tool like factor to make it easier to apply and test your Web Service screw (similar to go to the url in the browser).

  You can create LabVIEW screws of office using the Palette of HTTP Client to test the Web Service.

  You mentioned the following"I have compiled and deployed the application, and now when I try to open the front panel... "

  I'm a bit confused as this front panel you open. For example, do you mean that a LabVIEW project has been opened on the desktop, the Web Service of LabVIEW in the project has been deployed to the target of RT cRIO, and now, when you open the Web Service screw on the desk to look at the front panel, you get an error message?

• Double-click the object of front panel to find the terminal block diagram

  Hello world. I don't know why, if I double click on an object to front panel, labview opens the front tab customize, instead of finding control in block diagrams, which would be the normal behavior, as I read in http://labviewwiki.org/Tips_and_tricks#Debugging.

  I tried to reset the initial Setup by renaming the file LabVIEW.ini, but it doesn't seem to work.

  Do you know how double-click the object on the front panel and locate the?

  Thanks in advance!

  Guille.

  Did you restart LabVIEW after you rename the file labview.ini?

  There is an option (Tools... options...... general façade... 'Open the editor control with double click').

  It always seems to be set in your case.

• Email Windows opens the links with the cover page of microsoft instead of going directly on the link

  Whenever I click on a link in my email program Microsoft Front Page Windows opens the link in a crooked real format. So, to try to connect to a link in this format, I have to hold down the CTRL key and click.

  Can someone help me please on how to get the links to open as they do with all the other links that I click on in other programs. Windows Mail is my default e-mail program.

  Thank you!

  Jim D

  Hello

  1 have had any changes made on the computer before the show?

  2. are - what you're talking about in Windows Mail?

  I suggest you to select Internet Explorer as your web browser by default and check if the problem persists:

  Change the programs that Windows uses by default

  http://Windows.Microsoft.com/en-us/Windows-Vista/change-which-programs-Windows-uses-by-default

  See also:

  Solve problems with Windows Mail

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-Windows-Mail

• Mode problem, freezes or crashes sleep when windows opens again

  Hello

  The problem I have with the pavilion DV4-2145DX , approximately 12 months, using windows 7 is when I close the lid or put in "standby mode", now and then the window opens but the internet does not, nor all the other icons.

  When I go to restart it, the closure does not work so I stop hard.

  When it restarts all works well again.

  When I shut down normally and re start the computer no problem at that time.

  Any ideas please.

  Paul

  DavidPK wrote:
  

  Hi Paul,.

  This can sometimes be the result of hybrid sleep is enabled.  To check if this is the case, follow the guide on the link below to disable hybrid sleep.

  Disable hybrid sleep

  Best wishes

  DP - K

  Thanks Dp - K you have solved the problem

  Paul

• HP Z620: Front panel connector pinout

  Kindly help me on what is the pinout of front panel to motherboard HP Z60 connectors? Nothing is indicated on the map.

  

  Here is the motherboard front pinouts.  This is a view of the motherboard.  PIN 6 is the key, a missing brooch, which helps determine the orientation of the connector.

  

  The Z420, Z620, Z820 and all have the same front panel connector pinout.

  -Terminals 2 and 4 are for the power light.  HP systems have back to back LED connected between these pins.  A white LED lights up in red and a normal functioning (and flashes error codes) when there are errors.

  -Connect a switch momentary between pins 7 and 8 will turn on the computer and off.

  -The sensor pins are for a thermal sensor in cable from the front panel.  If it's sensor is not installed, the system fans will probably ramp at full speed and very noisy.

  -Speaker Out is the internal speaker.

• Error message from Windows XP Pro SP3 1720 Windows installation Script required

  Original title: WINDOWS XP PROFESSIONAL VERSION 2002 SERVICE PACK 3-__ERROR MESSAGE 1720 FOR WINDOWS - installation SCRIPT REQUIRED FOR INSTALL NOT running.

  I get error message 1720 whenever I try to install an Internet card mobile broadband (MC760) at Virgin Mobile

  Hello Ivpg1963,

  I saw a suggestion in another forum that said to remove drivers Virgin Mobile via Add/Remove programs.
  Then, remove the Novatel directory in Program Files. They claimed that remove the directory was the key.

  Then add the drivers of Windows XP to return to the large map Strip MC760.

  Please reply back and let us know if this can help.

  Thank you

  Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Clear the window open - cannot close

  I've had this computer for almost a year and when I start a blanl white window opens, and you can not close it. He has not created any problems so far... I am trying to remove a program, and he says to close all windows before uninstalling... I have everything I can close, but that only one window open is now cause for not being able to uninstall. Need help please, I don't know what to do...

  Hello shana66,

  Thanks for posting on the Microsoft answers Forum.

  I suggest that you download the Windows Installer Cleanup utility. Click here for a link to download the utility. You can use the utility to remove installation information for programs that were installed by using Windows Installer. Remember that Windows Installer CleanUp Utility does not remove the actual program from your computer. However, it will remove the installation files so that you can start the installation, upgrade, or uninstall on.

  If please reply back and let us know if this helps with your question.

  Thank you

  Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Stream laptop HP 11: after the update of windows 8.1 Windows 10, the touch pad does not work

  My Hp Notebook PC 11 Stream works fine on Windows 8, 1 until I updated to windows 10. Now the touchpad is dead. I have to use a USB mouse.  In Device Manager, all the drivers work fine. Any clue?

  Thank you for visiting the Forums HP's Support and welcome.

  Information below can help you

  Make sure your keyboard is on

  Check in the settings 'Mouse & touchpad' to ensure that the touchpad is enabled.

  Open the Settings menu (Start > settings) and go to devices > Mouse & touchpad. Scroll to the bottom of the screen, and then click additional mouse options.

  The mouse properties window opens. Click on the tab more far to the right (it may be called MOMENTUM ordevice settings). Under devices make sure your keyboard is not disabled. If it is disabled, click on the touch pad to select, and then click Activate.

  Another thing to try is to see if your laptop has a function button that enables / disables the touchpad. It should look like a tiny touchpad with a diagonal line through it (on my computer laptop is F6, on other laptops we Fn + F5, Fn + F6 , or something else entirely). Try to switch this key if you have before you panic on the misfortunes of possible touchpad.

  Update your drivers

  Windows 10 has been out for a few months now, and most of the manufacturers of touchpad have updated their drivers accordingly. But you may need to manually update your driver.

  There are two ways to do this. First, click on the Start button and select Control Panel. In the Control Panel window, open the Device Manager.

  By clicking on "update driver software... "will your computer Internet search for an updated driver.

  Best regards;

  Marcel

  I am an employee of HP

  Please click the White Star Kudos to say thank you for helping.

  Please check accept as Solution if my help has solved your problem.