Error, you must be an administrator to run a console session using SFC

Similar Questions

• problems of the admin: message saying insufficient privileges: you must be an administrator when you run this application for the first time

  I bought this new comp with windows 7 already installed. has worked fine up intill a week or two it y a. I installed a new game, and after installation, I press launch to play it and pop up with a message saying not sufficient privileges: you must be an administrator when you run this application for the first time. also, I thought that I must be the administrator when I tried to launch the disk defragmentation. my account is the administrator account so I don't understand why they say that.

  I'm sorry. I was reading through additional FAQS regarding the same problem. I saw where someone said to try to add another admisistrator account to try to take on the former. but I had no luck with this ether. I also downloaded the program of the UAC, and I turned it off, reset my computer and still no change to my problem. I also tried to download the MSE restore tool, but I found myself with a message saying that I have no MSE

  Sorry, the MSE tool is to set the MSE when its broken.
  UAC controller Tool v1.0 can be used to control the
  The UAC settings.

  However, I suggest you restart the PC and after BIOS hold the F8 key
  and when the Windows Startup Menu appears, select Mode safe mode with networking.

  Now, you will enter Safe Mode. On the page to connect, you will see the
  Standard Windows administrator click it to open a windows session, press and hold
  in mind, the password can be blank.

  Once you have done that make a new account administrator and giv it a name.
  Restart the PC. That you did this newspaper using the new account.
  Once you have done that decide what to keep with your current administrator
  account once you've done it restart the PC, BIOS hold down the F8 key and
  Select Mode safe mode with network and enter dependencies the Standard Windows administrator.

  Go to control panel-> user accounts control and security for the family-> user accounts, then
  Select manage another account. In the list, select the administrator account
  your select and then delete the account, then it will ask you if you want to keep
  files etc, it's your own decision. Itknowledge24.com

• sudo: Sorry, you must have a TTY to run sudo

  Hi guys,.
  
  
  When I install the 12 c management agent by using a single console upgrade step 'RunRootScript' failed with the error below.
  
  sudo: Sorry, you must have a TTY to run sudo
  
  But the State of the 'PreDeployAgentSW' work is successul.
  
  
  Can someone tell me how to solve this problem.
  
  Can I run the root.sh script manually.
  
  What are the scripts that I should run... If I have to run the scripts manually.
  
  
  Thank you
  Silver
  
  Published by: Erin.Silver on April 2, 2013 03:55

  You try to deploy a fresh agent 12.1.0.x of the Add Wizard (push agent) host in the console EM OR you upgrade your existing em 12.1.0.1 to 12.1.0.2 using upgrade agent agent console in the EM console?

  (a) If you are doing a new installation of 12.1.0.1 agent then look at the requirement of the section required pre sudo:
  You will need to be defaults requiretty comment in the/etc/sudoers file (this is fixed in MS 12.1.0.2)

  (b) If you upgrade the agent, then make sure that the agent upgrade work is successful and see details here: http://docs.oracle.com/cd/E24628_01/upgrade.121/e22625/upgrading_12101_PS1_agents.htm#CIHCEEIB

  If you are upgrading a management as a User Agent that does not have root privileges, or that you upgrade a Management Agent without having preferred preferred credential, a warning is displayed. You can ignore this warning during the upgrade. Later, you can connect the host to the Ma as the root user and run the $/core/12.1.0.2.0/root.sh script. After you run this script, make sure that you also run the $/core/12.1.0.2.0/replacebins.sh script on the host computer.

  It is also explained in the guide: http://docs.oracle.com/cd/E24628_01/upgrade.121/e22625/upgrading_12101_PS1_agents.htm#CIHCEEIB

• 8.1 window isn't downloading store as message is coming that you must enter the administrator account.

  8.1 window isn't downloading store as message is coming that you must enter the administrator account. I already use admin account. How to solve it?

  Original title: Update window 8

  You may not use the store from the built-in Administrator account (the one that is actually named 'administrator'), because this account is supposed to be a backup for emergencies only.

  If you create your own account with a different name (it may still be level administrator), you can use the store.

• iTunesConnect error "you must choose a generation."

  I submitted my app .zip distribution successfully using the Application Loader. Now I'm trying to select this build. iTunes Connect does not allow me to.

  How can I fix this, Bob Bringhurst - Adobe? Amiellemiel?

  I get this error:

  

  And yet, when I go to select a generation, I have no option to select.

  

  It's driving me crazy. Your documentation is obsolete and is no longer Guide your users through submitting to the app store. HOW WE DOWNLOAD ON THE APP STORE?

  Help, please. Please, I beg you.

  Apple has recently redesigned iTunes Connect. When they did, they introduced a number of bugs, including this one. If you are looking for this error message into Google, you will see a number of threads in stackoverflow.com and forums of Apple regarding the sign of failure to appear in iTunes Connect when you try to submit a new version of a generation. Different approaches work for different people. Try clicking on the Prerelease tab and refresh the page. See the comments in these discussions for more ideas:

  iOS - the new iTunes connect interface error "You must choose a build" - Stack Overflow

  iTunesConnect error "you must choose a drink... | Apple support communities

  I am currently in the process to update the release guide to reflect the new interface of iTunes connect. (For what it's worth, Google also changed their developer console UI, so I need to update the instructions for the game of Google publishes as well.)

• 10150:error: you must provide the password for SYS the...

  Salvation;
  I'm doing the installation of vault db r12.0.6 db - version 10.2.0.3... While I try to install I get this error:
  
  10150:error: you must provide the password for SYS the Oracle Database Vault will be installed. in the vault of the Oracle 10.2.0.3.0 database Scripts pane. Installation cannot continue
  for this component.
  
  
  
  Anyone have idea?
  
  PS: I found the remark and he says:
  
  Selected user: stop the installation of this component only.
  The solution is to ignore the error.
  
  But if I chose this option that I come back after the next stage of its 90% waiting and begging and not spend the next step
  
  Thank you
  HELIOS

  Helios,

  Why should you install the vault of the database? Please note that this is optional and can be installed/configured later.

  Kind regards
  Hussein

• Error - you must use an account with administrator privileges to install Windows 8.1

  Original title: Windows 8 installs 8.1 Windows Update even though I am the administrator

  Hello, I recently brought an Alienware X 51 with Dell Windows 8, I installed all the updates, now that I see the Windows 8.1 update in the store, I clicked on it and I clicked on download it came with this message.

  Store

  You must use an account that has administrator privileges to install Windows 8.1. try to connect with the user of an administrator on this PC account and retry the update

  now, I understand that I am the administrator of my PC and the only administrator of my PC anyway I signed on my Microsoft Account that I use for my PC and signed again the problem is the message came again and continues to come and I cannot update my Alienware X 51 with Windows 8 and Windows 8.1 if someone could help me solve this problem , it would be very useful and that they would have my gratitude.

  Hello

  I've read reports that uninstalling Windows Update KB2871389, and then put it back solves the problem.

  I read recently that this Fix - It might help...

  http://support.Microsoft.com/kb/971058/en-us

  I noticed an update of windows has posted recently for my 8.1 Win correct problems with the store...

  You can check to see if she shows up to win 8 also... I can't remember the number of KB unfortunately.

• lyingWhen application of a fix via ADOPTION, he failed with the AutoPatch error: you must be in Maintenance Mode to apply the patches.

  Everything by applying the patch Patch 18345006 as explained in Doc 1981206.1 , in the phase to apply it, I get the error

  AutoPatch error:

  You must be in Maintenance Mode to apply the patches.

  You can use the AD Administration utility to set the Maintenance Mode.

  I'm on Oracle EBS 12.2.4, Windows 2008 R2 x 64, 2 appl_tops not shared and the error occurs on the primart node.

  How I applied the patch

  source, run fs

  adoption phase = apply patches = 18345006 = no allnodes

  The issue was that my tns ifile was entered incorrectly for _PATCH entered tns. After having corrected the phase to APPLY fine.

  Apparently, the maintenance mode error is just a smoke screen

• External hard drive suddenly cannot open it give the message error "you must format the disk in the drive until you can use it", and your hard disk is 0 bytes

  External hard drive can not suddenly open - fixed

  my external hard drive worked very well all the time, but suddenly I can't open it more, when I tried to open it, it gives the error message "You must format the disk in the drive until you can use it" and my hard drive is 0 bytes, average there is no file in the hard drive. Average, all the data inside hard disk are gone!

  Hello muhammad.

  Before you do anything with this player, you can search online for some data recovery utilities so that you can try to recover your data.

  What operating system do you use?

  Have you tried running chkdsk on the drive?

  Let us know.

  Best regards

  Matthew_Ha

• Error "you don't have administrative privileges.

  I write on behalf of a client. Could not load the software on his computer because it receives the error message. Already tried going to user accounts to correct without result. Help, please.

  Thank you.

  Don't read too much into this error.  When a program installs, please put the files in certain directories and add entries in the system registry.  If for some reason, she finds that he can not create a file or registry entry it often over-simplistically assume that it is because you are not an administrator user and hot flashes to the top of this error.  Reality and administrator may be denied the privilege to directories and records like any other user.  This can occur due to malware or a too aggressive security program or a corrupted file system.  If I was in your position, I would first like to run a "chkdsk /f" and if that did not help, run the freeware "Process Monitor" and are trying to determine which directory or registry did not allow changes that are needed.  Not for the hearts-of-heart, this program can easily provide the information overload.

  Process Monitor: http://technet.microsoft.com/en-us/sysinternals/bb896645>

  The quick check to see if you have administrator privileges is to right-click on 'start '.  If "Open All Users" is one of the options that are displayed in the window, then you have administrator privileges.

  HTH,
  JW

• My HDD shows this error: "you must format the disk in the M: drive, until you can use it. You want to format? »

  My HDD shows this error: you need to format the disk in drive M: until you can use it. Format you? 
  Please help me! the hard drive is like my life...
  That's the reason of my existence...
  I need in the data and that i will do everything I have to please :/ someone help me
  Please helpppp!

  Original title: WD hard drive problem! Desperately need help. Please

  Hi Arman,

  Thanks for posting your query in Microsoft Community.

  I would say you can remove the drive letter M: using disk management and assign a different drive for the drive letter and check if it helps you to solve the problem and if the drive works very well.

  To change the drive letter in disk management follow the steps below:

  a. open computer by clicking the Start> Control Panel > system and security> Administrative Tools > computer management. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  (b) in the left pane, click disk management.

  c. click the drive that you want to change and then click change drive letter and paths.

  d. do one of the following:

  • For letter an if it has not already received, click Add, click the letter you want to use and then click OK.
  • To change a drive letter, click change, click assign the following drive letter, click the letter you want to use, and then click OK.
  • To remove a drive letter, click Remove, and then click Yes to confirm that you want to remove.

  Additional information:

  Change, add, or remove a drive letter

  In addition, please refer to the steps posted by NakulShridhar responded on October 14, 2011 in the following thread and check if this can help:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-update/you-need-to-format-the-disk-in-drive-j-before-you/4e153784-3217-4425-9c39-48030af82a13

  Warning:
  Running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data can be lost.

  Hope this information is useful. Let us know if you need more help, we will be happy to help you.

• When you try to share Windows Media Player, error, you must first be allow access to the library

  I want to share my Windows Media Player and have checked all the boxes according to the needs

  But when I go to another identical computer, it displays the name of the library to share but said

  "Before you can play items in the library, you must first access to the library" it works the opposite way round - I can see the other computer media and play from there, but cannot read any media on this computer.

  In the box, I want to run the media on I can see the name but not the small triangle to expand the options

  Am running Vista professional

  Any ideas please?

  Hi TonyCope,

  1 are you able to share files both ways on both computers?

  Have you checked if you have configured media sharing on the computer that doesn't work properly?

  For more information, see the link:

  http://Windows.Microsoft.com/en-us/Windows-Vista/change-settings-for-sharing-media-in-Windows-Media-Player

  2 are the two machines running Windows Vista Business?

  3 a share already worked on both computers, or has it always been this way?

• You must be an administrator to install

  for some unknown reason, windows (Vista OEM home premium) has decided to not allow me to open Word or Excel (did not try the other programs of the suite office) and indicates that they are not installed.
  I went to re - install Office and the system indicates that you must be administrator to install Office.
  I was not ever administrator because it there was only a single user when the computer was purchased.

  I checked the user account to ensure, and it always shows the status of administrator.
  I went to the MS customer support link supplioed and he asked the product id that is not ideally on the sticker on the side of the computer.
  the collected through the system information was not accepted by the program (naturally) so they suggested contacting the paid support (of course)

  any ideas?

  Support issues should you have an OEM of Windows version. You must go to your systems manufacturer to get help from Windows.

  On the question of the Agency, it depends on if it came with the computer, or you purchased it separately. It's hard to say without a lot more information about how to resolve the problem. The easy way is to do a system restore to a time before this problem.

  To restore the system to a point in time before this problem, follow these steps:
  Click on START and type > system restore > press enter
  If the recommended restore point is not enough back away, use the option "choose a different restore point.

  If you have your Office CD-ROM, you can use the Windows Installer Cleanup utility to wipe. Then you should be able to reinstall using your Office CD.
  http://support.Microsoft.com/kb/290301

  I hope this helps Mark <> Microsoft Partner

• External hard drive not detected with the error: "You must format the disk in the J: drive until you can use it."

  Hello

  I have an external hard drive to work perfectly. I'm back from vacation, and it does not appear under "My Computer". It appears under "Devices and printers", however. This is a link to a screencap of Device Manager: http://i.gyazo.com/9e91e1d71ed32c55dba0419e79b499d5.png

  The device in question is that of J:, and it says here that he has 100% free space, that worries me, because he had only 50 GB of free space when I used the latter. After that I open the disk management, I get a pop up message saying: "You must format the disk in the J: drive until you can use it."

  How can I get my hard drive appears again?

  Thank you

  Original title: external hard drive not appearing is not in Windows 7

  Hi John,.

  Thanks for posting your query in Microsoft Community.

  I imagine the inconvenience that you are experiencing and will certainly help you in the right direction to solve the problem.

  According to the error message, I suggest trying the suggestions posted by the NakulShridhar responded on 14 October 2011 and by that alexquiteguy replied on 13 January 2011 in the thread following link and check if it helps.

  "You must format the disk in drive J: before you can use it"

  [Steps apply to Windows 7]

  Hope this information is useful. Let us know if you need more help, we will be happy to help you.

• Error: "you must first activate windows.

  Original title: Activation and network Windows Help needed!

  First my windows started having network problems. So I "fixed" with the cd in the boot menu. Repair complete, and now it was time for me to open a session. I entered my password, but it says "you must first activate windows. The network problem does not seem to be fixed, before I repaired windows my network said "limited or no connectivity." So I can't activate / download on the desktop. Does anyone know how to fix this? Also the telephone activation method does not work. The figures given for the South Africa do not work. I can't get into office without having to activate my windows.

  Hi SLeenk,
   
  Here are the numbers to call you from the South Africa for activation.
   
  South Africa:
  0860 22 55 67 (CALL MS)
   
  International
  + 27 11 5000 of 990
   
  Fax
  Please include the recipients first name and
  (011) 361 7004
   
  For more information about activation problems, see:

  How to activate Windows XP