Errors with the selection event

Similar Questions

• Errors with the System Event Notification Service and Services.msc

  I tried to watch the last questions in this Web page before this announcement. I'm using a desktop computer NEC and somehow, every time that I boot on my computer, then I logged

  on my account, "System Event Notification Service does not work. Contact your administrator... "blah blah blah. I tried using Services.msc and administrator
  However, I use my computer now on safe MODE and Normal mode. Oh yes as I'm in safe MODE, I can't start anything in Services.msc. I can, however, restart the services, but it doesn't seem to work.  Someone help me turn my computer back to normal? : D

  Hi Chuayujie,

  1. did you of recent changes on the computer?

  2. are you able to work on your computer in normal mode after receiving the error message?

  If you can boot into normal mode, you can try to perform a SFC scan and see if it helps.

  You can run scanning of the file system [SFC] checker on the computer that will replace missing or corrupt files & check if the problem persists.

  For more information, you can consult the following link.

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  Hope this information is useful.

• Satellite L350-214 - error with the software Reeltime

  Hello

  I have a Satellite L350-214 with Windows 7 Pro and have encountered an error with the software Reeltime, I uninstalled and reinstalled and still get the error below. Any help or assistance would be great

  Tony Miller

  Log name: Application
  Source: Windows Error Reporting
  Date: 2010-11-30 12:27:58
  Event ID: 1001
  Task category: no
  Level: Information
  Keywords: Classic
  User: n/a
  Computer: Tony-TOSH
  Description:
  Fault bucket 1223018385, type 5
  Event name: CLR20r3
  Answer: No available
  Cabin ID: 0
  Signature of the problem:
  P1: tosreeltime.exe
  P2: 1.0.0.0
  P3: 4a769d0e
  P4: WindowsBase
  P5: 3.0.0.0
  P6: 4b5950b7
  P7: a86
  P8: 18
  P9: System.InvalidOperationException
  P10:
  Attached files:
  C:\Users\Tony\AppData\Local\Temp\WER7C9E.tmp.WERIn ternalMetadata.xml
  These files are available here:
  C:\Users\Tony\AppData\Local\Microsoft\Windows\WER\ ReportArchive\AppCrash_tosreeltime.exe_25c5a6496c7 ad44943ce88637e3389e8a80bd45_07f0c745
  Symbol of the analysis:
  Recheck for solution: 0
  Report ID: d5b71327-fc74-11df-a596-00266c333aed
  State: 0
  The event XML:
  
  
  
  1001
  4
  0
  0 x 80000000000000
  
  37886
  Application
  Tony-TOSH
  
  
  
  1223018385
  5
  CLR20r3
  Not available
  0
  tosreeltime.exe
  1.0.0.0
  4a769d0e
  WindowsBase
  3.0.0.0
  4b5950b7
  A86
  18
  System.InvalidOperationException
  
  
  
  C:\Users\Tony\AppData\Local\Temp\WER7C9E.tmp.WERIn ternalMetadata.xml
  C:\Users\Tony\AppData\Local\Microsoft\Window s\WER\ReportArchive\AppCrash_tosreeltime.exe_25c5a 6496c7ad44943ce88637e3389e8a80bd45_07f0c745
  
  
  0
  d5b71327-fc74-11df-A596-00266c333aed
  0
  
  
  My system specs

  Hey,.

  If you get this error Reeltime, you should try Ccleaner. There may be a registry problem and CCleaner might solve this problem. This great freeware and easy tool which you can download here:
  http://www.Piriform.com/

  Check this box!

• Error message: the selected task "{0}" no longer exists. to view the current task, click Refresh

  When I go to start Task Scheduler, I get this message "the selected task"{0}"no longer exists. to see the current tasks, click Refresh"so I go ahead and click on refresh and get the same error message. How can I solve this problem? Any help and any help would be greatly appreciated. Thank you!

  I spent a few minutes and tracked down the problem and a solution. This is a result of work files that exist in the tasks folders that do not have access to (probably) in the registry. Here's how I worked through the issue - will take time, but it has cleared up the problem completely for me:

  1. Open the Task Scheduler, and then click OK when you are prompted with the error. It may seem that you receive again and again the same error, but it is really because of the number of tasks that are broken. Make a note of the number of times that you are prompted by the error of the selected task '{0} '. This is the number of work files that are out of sync with the registry.
  2. Start with the first folder under Windows tasks (Task Scheduler (Local) \Task Scheduler Library\Microsoft\Windows), and then select each file in turn until you receive the error of the selected task '{0} '. This folder contains files that are not synchronized with the Task Scheduler.
  3. Open Windows Explorer and navigate to the folder of tasks (% SystemFolder%\Tasks\Microsoft\Windows) and look for the folder that corresponds to the folder in which you received the error.
  4. For some tasks, you will be able to determine which files need to be removed by comparing the list in the Task Scheduler with the list of files in the Explorer. Some tasks will be only one file in the Explorer, or, in one case, I had 2 and the first was absent. Once Task Scheduler encounters this error is no longer display the tasks so he does the work to get the two in sync a little harder. Once you have determined which files exist in the folder of files but do not exist in the folder of the Task Scheduler, remove these files.
  5. IMPORTANT - close and re-open the Task Scheduler. Once the error, Task Scheduler no longer displays the missions you have to close and restart in order to continue your effort of synchronization.
  6. Continue to select folders in the Task Scheduler under Windows taskbar until you encounter the error once again and repeat the process of determining which file exists on the file system, but not in the Task Scheduler.

  I had 6 files that were at odds with what was shown in the Task Scheduler. Once I deleted all the incriminated files, task scheduler has pulled up without problem.

  Good luck.

• How reslove an error with the dbms_redefinition.start_redef_table command?

  Command:

  BEGIN

  () DBMS_REDEFINITION.start_redef_table

  uname = > "kiku"

  orig_table = > 'pletest3_pn_kiku_api_db ',.

  int_table = > 'pletest4_pn_kiku_api_db');

  END;

  Error:

  Error report:

  ORA-12008: error path refresh materialized view

  ORA-14400: inserted partition key is not mapped with any partition

  ORA-06512: at "SYS." DBMS_REDEFINITION", line 50

  ORA-06512: at "SYS." DBMS_REDEFINITION", line 1343

  ORA-06512: at line 2

  12008 00000 - "error in the path of refresh materialized view.

  * Cause: Table SNAP$ _ < mview_name > reads lines of sight

  MVIEW$ _ < mview_name >, which is a view of the main table

  (the master can be on a remote site).  Any

  error in this way will cause this error when updating.

  For updates of the Rapids, the table < master_owner >. MLOG$ _ < master >

  is also referenced.

  * Action: Examine the other messages on the stack to find the problem.

  See if SNAP objects $ _ < mview_name >, MVIEW$ _ < mview_name >.

  < mowner >. < master > @ < dblink >, < mowner >. MLOG$ _ < master > @ < dblink >

  There is always.

  How reslove an error with the dbms_redefinition.start_redef_table command?

  As I said before, this may be reproduced if the intermediate table is not created correctly.

  SQL> --My database version.
  SQL> ----------------------
  SQL> SELECT * FROM v$version;
  
  BANNER
  --------------------------------------------------------------------------------
  Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - 64bit Production
  PL/SQL Release 11.2.0.1.0 - Production
  CORE    11.2.0.1.0      Production
  TNS for Linux: Version 11.2.0.1.0 - Production
  NLSRTL Version 11.2.0.1.0 - Production
  
  SQL> ed
  Wrote file afiedt.buf
  
    1  CREATE TABLE not_partitioned_tbl AS
    2*  SELECT object_id,object_name,created,owner FROM all_objects
  SQL> /
  
  Table created.
  
  SQL> ALTER TABLE not_partitioned_tbl ADD CONSTRAINT not_partitioned_tbl_pk PRIMARY KEY (object_id);
  
  Table altered.
  
  SQL> CREATE INDEX npt_created ON not_partitioned_tbl(created);
  
  Index created.
  
  SQL> EXECUTE DBMS_STATS.gather_table_stats('SCOTT','NOT_PARTITIONED_TBL',cascade=>true);
  
  PL/SQL procedure successfully completed.
  

  Now, I create the staging table without MAXPARTITION, so not all "created" dates cannot be mapped.

  SQL> ed
  Wrote file afiedt.buf
  
    1  CREATE TABLE partitioned_tbl (object_id NUMBER, object_name VARCHAR2(30), created DATE, owner VARCHAR2(30))
    2      PARTITION BY RANGE (created)
    3      (PARTITION pt_2005 VALUES LESS THAN (to_date('01/01/2006','dd/mm/rrrr')),
    4       PARTITION pt_2006 VALUES LESS THAN (to_date('01/01/2007','dd/mm/rrrr')),
    5       PARTITION pt_2007 VALUES LESS THAN (to_date('01/01/2008','dd/mm/rrrr'))
    6      --PARTITION pt_rest VALUES LESS THAN (MAXVALUE) -- Maxpartition  is commented out intentionally.
    7*     )
  SQL> /
  
  Table created.
  
  SQL> EXEC DBMS_REDEFINITION.can_redef_table('SCOTT','NOT_PARTITIONED_TBL');
  
  PL/SQL procedure successfully completed.
  
  SQL> conn sys as sysdba
  Enter password:
  Connected.
  SQL> ed
  Wrote file afiedt.buf
  
    1  BEGIN
    2     DBMS_REDEFINITION.start_redef_table('SCOTT','NOT_PARTITIONED_TBL','PARTITIONED_TBL');
    3* END;
  SQL> /
  BEGIN
  *
  ERROR at line 1:
  ORA-12008: error in materialized view refresh path
  ORA-14400: inserted partition key does not map to any partition
  ORA-06512: at "SYS.DBMS_REDEFINITION", line 52
  ORA-06512: at "SYS.DBMS_REDEFINITION", line 1646
  ORA-06512: at line 2
  
  SQL>
  

• Problem with the onChange event

  Hello
  
  I am currently facing a problem with the onChange event when you use a datefield entry type.
  for example
  < cfinput type = "datefield" name = "date_txt" width = "175" mask = onFocus = "date_txt.disabledDays" dd/mm/yyyy"= [0.6]; "tabindex ="1"style =" "text-align: left" onChange = "checkDate (); ">
  
  And then, when I alert the selected date in checkDate function, I still get the old figure.
  for example
  public function checkDate (): Void {}
  Alert ("Date:" + date_txt.text);
  }
  
  For example if the date displayed is 05/05/2008 and I select another day (05/02/2008), then when the alert box appears, it still shows 2008-05-05.
  
  Any idea on how to solve this problem?
  
  Is this a bug with Flash Forms?
  
  Thank you and best regards,
  Yogesh Mahadnac

  I suppose that the function onchange occurs before the value of text is actually defined.
  Use the correct value
  Alert ("Date:" + date_txt.selectedDate);

  Ken

• Defined column ambiguous error with the Merge statement

  Hi guys,.
  I get the ' Error (136,4): PL/SQL: ORA-00918: column ambiguously defined "error with the following query of fusion,

  MERGE INTO Inv_Stk_Trns_Tail a
     USING (SELECT b.*, c.*
     FROM OLR b ,Inv_Stk_Trns_Tail c 
     WHERE b.Trn_Type <> '0'
       AND b.VoucherType IS NOT NULL
       AND b.VoucherType = 'SF'
       AND b.Item_Code = c.Item_Code
       AND c.PROPERTY = 0) src
     ON (a.Sl_No = src.Sl_No and a.Ref_No = src.Ref_No )
     WHEN MATCHED THEN UPDATE SET Item_Avg_Ppr = src.Opn_Avg_Cost,
                                  Rate_Bc = src.Opn_Avg_Cost;

  I tried to solve the problem in a lot of ways, but no use. Please help me solve this problem. If you want more details, I'll give you.
  Thank you
  RAM

  SELECT B.*, c.

  Try all the (necessary) columns on the code and the name of each column a unique alias.

• How to fix the error with the code: 0xe7210001 failed to load powrprof, object: cls

  Hello

  Dose anyone know how to fix the error with the code: 0xe7210001, message: unable to load powrprof, object: CLSD-no-it is found;
  OR: Fingerprintsoftware OR error: replicas THotkey.exe message window and the computer freezes

  Maleware scanned and virus, also in safe mode, found no infection, reinstalled driver fingerprint, but nothing has changed.

  grateful for the help!

  Hello

  > message: unable to load powrprof, object: CLSD-no-it is found;
  In my view, this would mean that there is a problem with Toshiba Power Saver
  What laptop Toshiba, you have exactly?

  Maybe reinstall Power Saver could help. You can find it on the official website of Toshiba.

• Not compatible with the selected drive - Satellite A300D firmware update

  Hi, I have a problem with the update of the firmware. When I try it says "the Firmware is not compatible with the selected driver.

  And another problem is that my dvd drive does not DVD - R and DvD + R is running very slow and big trouble, it must try several times to succeed.

  Please help me.

  Hello

  Maybe you should tell us what CD/DVD drive you have and where you have downloaded the update of the firmware.
  In my opinion firmware update is not normally necessary.

  Have you ever tried to remove upper and lower filters in the registry? This often solves problems with ODD.

• Flight Simulator 2004 install stops at 97% say there is an error with the file world.cab

  While the resettlement of fs2004, the installation stops at 97% saying there is an error with the file world.cab, this damaged disc 4.  Someone at - he found a solution to this?

  Thank you

  Well, if, as you say, the disc is damaged. The solution would be to get another drive.

  Although I would have a look at the following:

  Take a look at the following: http://support.microsoft.com/kb/258496

  I hope that, if necessary, you can get a free replacement disc.

• Get "I/o Error" with the 0x8078002A error code when I start a backup.

  * Original title: IO Error Message - I am an amateur

  When I start a backup of my hard drive to my external hard drive, I get an error that reads "I/o Error" with the 0x8078002A error code.  I am a real novice.  I can do either fix it or work around this problem?

  Hello

  Welcome to the Microsoft community.

  Try the steps in these articles:

  Error message when you try to perform a full backup on a Windows Vista-based computer: "" the request could not be performed because of an i/o device error".
  http://support.Microsoft.com/kb/952272
  Note: It is applicable for Windows 7 as well.

  Perform a clean boot:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: After a repair, be sure to set the computer to start as usual as mentioned in step 7 in the Knowledge Base article.

• JavaScript exception: error calling the selection function: TypeError: $(...). museMenu is not a function

  Since the update, one of my sites is weird. When you open the Web, that's what he said, "JavaScript exception: error calling the selection function: TypeError: $(...).» museMenu is not a function ". The site is www.hibiscuscuisine.com. If someone could help me understand this point, I would really appreciate it. Thank you

  Hello

  Please follow the complete instructions mentioned in this post - MuseJSAssert: error calling the function switch: TypeError: .museMenu $(elem) is not a function by Zak.

  Let me know if it works

  Thank you

  Ankush

• Error offline - we are sorry, but there was a communication error with the server. Please try again and if the problem persists, contact Adobe Techincal Suport...  (INVALID_QUERY: XMLList object)?

  After a number of years of service, my Adobe Premiere CS4 gives me the following error message:

  Error offline - we are sorry, but there was a communication error with the server. Please try again and if the problem persists, contact Adobe Technical Support...  (INVALID_QUERY: XMLList object).

  I use this software on an old Dell desktop computer to two year with many members and drive.  It is a stand-alone application, not connected to a server.

  Anyone have any ideas on how to solve this problem?

  I think it has to do with the central resource is no longer supported.  Everything works OK if you ignore the message?

• How to use the selection tool to resize a text box? Before I was able to click on the text box with the selection too in order to resize, but now I click on it and it only gives me 'path' or 'anchor' options.

  How to use the selection tool to resize a text box? Before I was able to click on the text box with the selection too in order to resize, but now I click on it and it only gives me 'path' or 'anchor' options.

  Ashley,

  What about window > show the rectangle enclosing (Ctrl / Cmd + Shift + B to toggle)?

• Objects can be moved with the selection tool - InDesign CC2015

  Hello

  Can someone help with this problem? I can't move an object with the selection tool. I am able to select and change the coordinates to move objects, but thnot with the selection tool.

  I've updated the software and replaced the preferences.

  Thank you

  -Michael

  Thanks for the reply. I tried so many things that I could think of. For some reason, I didn't to restart my computer. That's what fixed it. Thanks again for your response.