Essbase backup for all levels

Similar Questions

• Select orders accounting aaa for all levels of privilege?

  Here is the syntax of the command:

  AAA accounting {auth-proxy | system | network | exec | login | orders level} {default | name-list} {arrhythmic | stop only | none} group [broadcast] name of

  The accounting type 'command' must include the privilege level of the orders that you log on. How can I connect all orders?

  Consider the following example:

   aaa accounting commands 15 default start-stop group mygroup

  If I run this command will mean that command that the user runs which have a level of less than 15 privilege are not registered? Or only commands that require exactly the privilege level 15 will be connected?

  How can I connect all orders regardless of the privilege level?

  Hey red,

  If you customize the command privilege level by using the command of privilege, you can limit who commands the unit accounts for by specifying a minimum privilege level. The security apparatus does not account for orders that are below the minimum privilege level.

  The default privilege level is 0. So if you do not specify a level of privilege then all should be counted.

  You can find the details of the order to. It's good for the SAA.

  http://www.Cisco.com/c/en/us/TD/docs/security/ASA/asa80/command/referenc...

  Kind regards

  Kanwal

  Note: Please check if they are useful.

• What happens exactly when I install Windows XP Service Pack 3? If I don't create backups for all the stuff I have on my computer, that all get deleted or something?

  The thing about automatic updates told me that I should install Windows XP SP3, because the one I have is no longer supported? I went to see what I have to do before installing it, and it says that I need to create backups... and I kinda don't know even what exactly is the SP 3 and what happens when I install it? Same thing with Windows Media Format 11 SDK. The explanation I got from Microsoft Support were a little confusing for me, if someone could please give me simple explanations? Thank you!

  Hi Petra "Jimmy."

  You try to install Windows Media Format 11 SDK?

  You can follow these links before you install SP3 on your computer.

  Steps to take before you install Windows XP Service Pack 3

  Learn how to install Windows XP Service Pack 3

  For more information about Windows Media Format 11 SDK, you can check this link.

  Windows Media Format 11 SDK

  If you try to install it, you can manually download and install Windows Media Format 11 SDK from this link.

  Update for Windows Media Format 11 SDK for Windows XP x 64 Edition (KB929399)

  Hope the helps of information.

  Please post back and we do know.

• Table tree ADF elements at all levels in nodeStamp facet

  Fusion Middleware Version: 11.1.1.5

  WebLogic: 10.3.5.0

  JDeveloper Build: Build JDEVADF_11.1.1.5.0_GENERIC_110409.0025.6013

  Project: Custom Portal Application WebCenter integrated with ADF custom workflows.

  Hello

  
  I have a problem with ADF Tree Table (af:treeTable) that if I add an item to a group under the facet "nodeStamp" he repeats for all levels in the tree even those outside the group.

  Overview:

  -3-master level / retail structure created using ADF business components (display objects 3 connected by 2 show links)

  -ADF Tree Table based on the master-detail

  -Requirement to indicate 3 levels of data in the first column tree

  -Table tree renders correctly showing the values for "node. FullName ',' node. DisplayValue' and ' node. HoursType' respectively in a tree of level 3.

  -When another element is added to the top node in the tree ("node. FullName') for example, some output text ('node. TimeBuildingBlockId'), it is displayed along components side ' node. DisplayValue' and ' node. HoursType' as well.

  Code snippet:

  < af:treeTable value = "#{bindings." Var PerPeopleFVO1.treeModel}' = 'node '.

  selectionListener = "#{bindings." PerPeopleFVO1.treeModel.makeCurrent}.

  rowSelection = "single" id = "tt1" styleClass = "AFStretchWidth."

  horizontalGridVisible = "true" verticalGridVisible = "true".

  disableColumnReordering = 'true' summary =' entered in the time sheet.

  displayRow = "selected" expandAllEnabled = "false".

  contentDelivery = 'immediate' autoHeightRows = '24 '.

  columnStretching = "column: column1 '.

  Binding = "#{pageFlowScope.TimecardMB.tree_binding}" >

  < f: facet name = "nodeStamp" >

  < af:column id = "c1" headerText = "Partner details" width = "500" >

  < af:group id = "g4" >

  < af:outputText value = "#{node." FullName}"id ="ot3"/ >

  < af:outputText value = "#{node." TimeBuildingBlockId}"id ="ot1"/ >

  < / af:group >

  < af:outputText value = "#{node." DisplayValue}"id ="ot4 ".

  inlineStyle = "color: Green;" make-weight: bolder; "/ >

  < af:outputText value = "#{node." HoursType}"id ="ot5"/ >

  < f: facet = 'filter' name / >

  < / af:column >

  < / f: facet >

  < f: facet name = "pathStamp" >

  < af:outputText value = "#{node}" id = "ot2" / >

  < / f: facet >

  < af:column FROM HERE... >

  Any ideas greatly appreciated.

  Hello

  Try to use a blender to distinguish three levels of the tree. You can have three different facets, three different af:group's.

  When you add at one level, it will not repeat in the other classes.

  Please see the excerpt below.

  selectionListener = "#{bindings." RefBusinessUnitView1.treeModel.makeCurrent}.

  rowSelection = "single" id = "t1" >

  facetName ="#{node.hierTypeBinding.viewDefName}">

  Alisson

• Restore will not ask for ALL my backup set.

  Had to replace a failing hard drive.  The whole process of installation and update of all my software went seamlessly.  Restore my PERSONAL files, however, has been a nightmare.

  I have a set of 3 backup disks (each successive), but has asked only the FIRST restore disc and then (VERY briefly) used the other.

  Unfortunately, not all the files that he handed in my hard drive are the latest versions, and some of my files are still missing.

  QUESTION: How can I force restore to call for ALL 3 of the consecutive backup drives before he leaves?

  I've been at this for hours, and I got it about.   GRRRR.

  Hello

  1. the restore process hang or fail?
  2. do you get an error message?

  We cannot force all disks to restore both. The backup and restore only will guide you to complete the restore process.
   
  For more information on "back up and restore: frequently asked questions" visit this link:
  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-and-restore-frequently-asked-questions
   
  Kind regards
  Syed
  Answers from Microsoft supports the engineer.

• Same zoom level for all documents in mosaic

  So I looked the easiest way to switch between several documents in Photoshop, never knowing that he was right under my nose:

  Windows/organize/tiles

  .. I can't believe the answer was here all this time lol.

  The only problem with that is that when your documents are all tiled, some are zoomed closer than others - some documents it is difficult to distinguish. Is it possible to have all docs out tiled so that they "coincide the tile", that's why showing us the entire document in its mosaic? (Like "View / Fit on the screen ')... If there is no way to do it maybe there is a way via script?

  I searched for a way to set the zoom level for all open documents at the same level (put them all to 50% for example). This could at least be a start and then I'm sure I could implement. Haven't found anything useful at the moment...

  Which version of photoshop and the operating system are you using?

  If you set one of the tile documents together to desired zoom level and then go to window > Arrange > Match Zoom, made

  It works?

• Differential incremental backup for RAC

  I inherited a CAR of two nodes (11r2 on RHEL 5.8 tikanga) with a shared network directory to be used as a backup location. He is the current backup strategy.

  RMAN> show all;
  using target database control file instead of recovery catalog
  RMAN configuration parameters for database with db_unique_name TESTdb are:
  CONFIGURE RETENTION POLICY TO REDUNDANCY 1;  # default
  CONFIGURE BACKUP OPTIMIZATION OFF;  # default
  CONFIGURE DEFAULT DEVICE TYPE TO DISK;  # default
  CONFIGURE CONTROLFILE AUTOBACKUP OFF;  # default
  CONFIGURE CONTROLFILE AUTOBACKUP FORMAT FOR DEVICE TYPE DISK TO '%F';  # default
  CONFIGURE DEVICE TYPE DISK PARALLELISM 1 BACKUP TYPE TO BACKUPSET;  # default
  CONFIGURE DATAFILE BACKUP COPIES FOR DEVICE TYPE DISK TO 1;  # default
  CONFIGURE ARCHIVELOG BACKUP COPIES FOR DEVICE TYPE DISK TO 1;  # default
  CONFIGURE MAXSETSIZE TO UNLIMITED;  # default
  CONFIGURE ENCRYPTION FOR DATABASE OFF;  # default
  CONFIGURE ENCRYPTION ALGORITHM 'AES128';  # default
  CONFIGURE COMPRESSION ALGORITHM 'BASIC' AS OF RELEASE 'DEFAULT' OPTIMIZE FOR LOAD TRUE;  # default
  CONFIGURE ARCHIVELOG DELETION POLICY TO NONE;  # default
  CONFIGURE SNAPSHOT CONTROLFILE NAME TO '/u01/app/oracle/product/11.2.0/dbhome_1/dbs/snapcf_testdb1.f';  # default
  
  

  The above is for the node 1, node 2 is identical except for line 17 (he refers to the "_testdb2.f").

  The backup script is below.

  run
  {
  recovery copy of database with tag 'ORA_OEM_LVL0_TESTdb_PRIM' until time 'SYSDATE-7';
  backup check logical incremental level 1 cumulative copies=1 for recover of copy with tag 'ORA_OEM_LVL0_TESTdb_PRIM' database;
  backup check logical archivelog all tag 'ORA_OEM_ARCH_TESTdb_PRIM';
  }
  allocate channel for maintenance device disk type;
  crosscheck backupset;
  crosscheck archivelog all;
  delete noprompt obsolete device type disk;
  
  

  I'm a relatively new DBA, but I think that the strategy above maybe even does not work like the "db_recovery_file_dest" SQLPLUS references + FRA (not the shared network directory) and the two places (both FRA directories) and shared network directory without large amounts of data in them.  I think that the previous owners of this CAR may not had adequate support DBA.

  In any case, I thought to change the configuration as such:

  RMAN> show all;
  using target database control file instead of recovery catalog
  RMAN configuration parameters for database with db_unique_name TESTdb are:
  CONFIGURE RETENTION POLICY TO RECOVERY WINDOW OF 7 DAYS;
  CONFIGURE BACKUP OPTIMIZATION ON; 
  CONFIGURE DEFAULT DEVICE TYPE TO DISK;  # default
  CONFIGURE CONTROLFILE AUTOBACKUP ON;
  CONFIGURE CONTROLFILE AUTOBACKUP FORMAT FOR DEVICE TYPE DISK TO '%F';  # default
  CONFIGURE CHANNEL DEVICE TYPE DISK FORMAT '/SharedNetworkDrive/ora_df%t_s%s_s%p';
  CONFIGURE DEVICE TYPE DISK PARALLELISM 1 BACKUP TYPE TO BACKUPSET;  # default
  CONFIGURE DATAFILE BACKUP COPIES FOR DEVICE TYPE DISK TO 1;  # default
  CONFIGURE ARCHIVELOG BACKUP COPIES FOR DEVICE TYPE DISK TO 1;  # default
  CONFIGURE MAXSETSIZE TO UNLIMITED;  # default
  CONFIGURE ENCRYPTION FOR DATABASE OFF;  # default
  CONFIGURE ENCRYPTION ALGORITHM 'AES128';  # default
  CONFIGURE COMPRESSION ALGORITHM 'HIGH' AS OF RELEASE 'DEFAULT' OPTIMIZE FOR LOAD TRUE;  # default
  CONFIGURE ARCHIVELOG DELETION POLICY TO BACKED UP 1 TIMES TO DISK;
  CONFIGURE SNAPSHOT CONTROLFILE NAME TO '/u01/app/oracle/product/11.2.0/dbhome_1/dbs/snapcf_testdb1.f';  # default
  
  

  RUN
  {
  RECOVER COPY OF DATABASE WITH TAG 'incr_update' UNTIL TIME 'SYSDATE - 7';
  BACKUP INCREMENTAL LEVEL 1  FOR RECOVER OF COPY WITH TAG 'incr_update' DATABASE PLUS ARCHIVELOG;
  DELETE ARCHIVELOG ALL;
  }
  
  

  I don't know that miss me a few things in my backup strategy. Any advice is greatly appreciated!

  Thank you

  PS - Yes, we have a license for compression

  Good point about ARCHIVELOG ALL DELETE. Your suggestion would be to replace it with DELETE NOPROMPT OBSOLETE? Do I need to perform a cross-checking beforehand or Oracle already know from the backup?

  1. CONFIGURE ARCHIVELOG DELETION POLICY TO SAVED 1 TIME TO THE DISK.
  2. INCREMENTAL BACKUP LEVEL 1 for BACK OF COPY WITH TAG "incr_update" DATABASE MORE ARCHIVELOG;
  3. DELETE ARCHIVELOG ALL;

  As you have Setup CONFIGURE the STRATEGY of DELETING ARCHIVELOG RMAN will not delete archivelog until archivelog backup 1 time on the disc.

  But HemantKChitale have a good point, if for some reason any person clearly that the configuration you'll probably ARCHIVELOG DELETE without backup, do your backup is inconsistent.

  So is advised 'INCREMENTAL BACKUP of LEVEL 1 TO RETRIEVE COPY WITH TAG "incr_update" base of DATA PLUS ARCHIVELOG DELETE INPUT' or 'BACKUP ARCHIVELOG ALL DELETE INPUT';

  You can avoid delete the archivelogs without backup, because RMAN will only remove saved ARCHIVELOGS.

• Strategies of backup for virtual machines 200 +?

  Hello

  I have a question for you guys - if you have more than 100 virtual machines in your environment or your virtual machines are large & gt; 50GB, so what's your backup strategy for them? Are you using the VCB to backup all, or maybe you install the normal backup client (Veritas, CA, etc.) and backup via LAN? Or maybe you have other solutions for backup process?

  If you VCB, you have more than one VCB proxy? Or you start all on one server (a single script of vcb?)

  Thanks for any info.

  I should also mention that we use traditional backup for file servers agents over 200 Gb.  Ranger has a level file restore option, but it can take hours to reopen the file because it is compressed during the backup process.  I would also like to stress that the file formats shown in the screenshot are files zipped after the backup.  the size depends on how much space is used in the VMDK file.  some of the virtual machine listed are 50 to 70 GB vmdk files which are compressed within a 15 GB.  Also, when you are restoring is an exact replica of the original.  Some of my 50 GB VM restore tests were less than 30 minutes.

  If you have found this device or any other answer useful please consider the use of buttons useful or appropriate to award marks.

• iCloud Drive backup for apps does not work

  iPhone 6

  Version 9.3.4 (G 13, 35)

  64 GB

  iCloud free space Total: 127 GB

  Hello

  My drive to iCloud for the backup of data to any application (example; WhatsApp, TurboScan, etc.) doesn't work at all, for all he always ask me to check in the settings of iCloud drive if the rocker is enabled for the application, I intend to use, what is.

  I already did:

  Alternate market the iCloud drive and for each application, I was trying

  Open a session and of the iCloud account

  Reset the phone

  Turn on/off

  Any that have faced this problem or have any idea of how solve it?

  Thank you very much in advance for the comments and support.

  See you soon,.

  DOM

  Just to be clear, iCloud backup & iCloud drive are essentially two separate things.

  This can be useful, iCloud is primarily a service synchronization. Means that it can take the changes you make on one device and other devices to update this change if you do not have to be done individually on each device. Useful if you have more device. iCloud Drive is the term used for the part of iCloud that can synchronize files between your devices, just like Dropbox. iCloud backup is the backup of live data to iCloud part. Sync services aren't backups, just a way for your data reach another device.

  On your iPhone, if you go to:

  Settings > general > Srorage & use iCloud > manage storage (under iCloud) > [phone] (BACKUPS)

  You can see what data is stored for each application (Tap 'Show all Apps' if necessary).

  For the iCloud drive problems, this article may help:

  Get help using iCloud drive - Apple Support

  If this does not help, try rephrasing your question with exactly you have problems with and ask again.

• Creating a backup for new 6s

  I needed a new 6 for personal use when my business is my current 6 s for work only. I backed up my new phone to my phone work on my Mac to save all my information, aps, etc that I have to delete my work phone aps personal, so I need now two different backups, but they are saved on the same device name.  How can I create a backup for my new phone, but all by keeping all the data?

  Each device that you are backing up to a computer via iTunes (or iCloud) will have a separate backup. It may be easier to tell apart them if you use a different name for each device in (on phones) settings > general > topic > name.

  You can check what backups that you have made to a computer via iTunes by clicking the iTunes Preferences and clicking on "Devices" in the top of the Preferences window. You can see all iCloud backups by (on your phone) going into settings > iCloud > storage > storage management.

• How can I solve this problem: ' Mail delivery failed: message back to the sender "for all recipients of my hotmail (outlook)

  Hello

  I get this email for all my "hotmail.com" recipients (outlook) when you try to send an e-mail to one of them that I had also for a front "msn.com" recipient:

  "This message was created automatically by mail delivery software.
  A message you sent could not be delivered to one or more of its
  beneficiaries. This is a permanent error. Failure of the following addresses:...
  host mx1.hotmail.com [65.55.37.72]
  Error SMTP from remote mail server after MAIL FROM: < [email protected] > SIZE = 8292:
  550 SC-001 (COL004-MC1F10) Unfortunately, the 198.1.119.134 messages have not been sent. As part of their network is on our list, please contact your Internet service provider. You can also consult your http://mail.live.com/mail/troubleshooting.aspx#errorsprovider. »

  Is there something I can do?

  Thank you very much for your help,

  Julie

  As more than first level help desk people, they are idiots! They are lucky to know enough to pick up the phone if it makes a noise.

  If their network or range of IP addresses is blacklisted only they can fix.
  I would ask to have this comeback for someone who knows something.

  It is not your problem, and there is nothing to fix on your computer.

• Reliable backup for Mac?

  Hi all

  I wish I had a solution for online backup for my mac, since I don't trust so that site comments more that increasingly are biased, I would rather ask my other consumers based on their experience!

  What are the reliable online backup solutions for Mac users out there?

  Features, I would love to find:

  -Backup crypted

  -Files/backups scanned and protect with antivirus and antimalware systems

  -Reliable in the sense that it is 200% of course, proven and protected that they will not share or disclose my data and they have secure servers

  -If possible, accessible from a Windows computer in case I need it

  I was thinking about everything that I wanted to put backup password protected DMG files (which are encrypted right?) and then upload to Google Drive, since at least Google servers should be online forever almost, but you are limited to 15 GB per account, anyone has any experience with the help of Google?

  Thank you!!

  The problem with online backup killer, is it will take perhaps as long as three days for any transfer out or or on your Mac. It is simply not practical.

• I made my largest site and how can keep the same size for all other sites?

  I did the 2 larger site and how to keep the same size for all pages when I re - open the web browser?

  You can use an extension to set a page zoom and the size of the default font on the web pages.

  • Default FullZoom Level: https://addons.mozilla.org/firefox/addon/default-fullzoom-level/
  • NoSquint: https://addons.mozilla.org/firefox/addon/nosquint/

• Manual backup for PC. message "there is not enough free space.  My last backup is 1.3 GB, 124 GB available, without encryption.

  Manual backup for PC. message "there is not enough free space.  My last backup was 1.3 GB, four weeks ago.   My disc is 256 GB total with more than 162 GB available.  I do not use encryption. I am running windows 10 with 4 GB of memory system, iOS 9.2.1 and iTunes 12.3.2.35.  The only thing that has changed to realIy is the latest update to iTunes. I found this page and tried the steps.

  If you are unable to make a backup of your iPhone, iPad or iPod touch - Apple Support iTunes

  I cleaned my recycling, did the reboot of my iPhone 5 s and my computer, disconnect all devices except iPhone and mouse, checked my security software (off), reset the lockdown folder.  Uninstalled/reinstalled iTunes 12.3.2.35.  No joy.

  I can do the manual backup on the PC of my wife, and she has more than 500 GB of available and uses the same version of iTunes, but on Windows 7.  Any ideas?

  Is the part of the computer which, by default, stores the backup on a smaller partition by accident?

  The part is \Users\yourusername\appdata\roaming\apple computer\mobilesync\backup.

  If this is not the case, the other thing I guess try would be to temporarily move the backups that exceed in this folder there and test if the prior backup is the problem of not being able to back up now.

• If you set time machine to a single account on an iMac, and you have several accounts, he will return for all accounts?

  This is probably a stupid question, but I bought a WD cycloids and am set up time machine for that.  As we have a family mac with multiple accounts, only can I configure the back on 1 account in sys prefs to cover documents etc on the mac as a whole?

  Thank you very much of a technology luddite

  Time machine backup all drives connected locally on your Mac, maintain existing permissions for all users. You can add folders or Volumes it should pass to the blacklist.

  It can back up to any local or accessible via the network of road, including the drive Time capsule on a LARGE Airport Extreme Base Station. It can't Backup AND Restore properly from a NAS or disc attached to a 'short' Airport Extreme.