Select orders accounting aaa for all levels of privilege?

Similar Questions

• Essbase backup for all levels

  Currently, I have this script to backup the data of level 0.

  Wondering how this can be updated for all levels of backup data?

  The warnings to watch?

  echo '- EXPORT ESSBASE DATA BACKUP -';

  echo "Running export orders Database...". » ;

  export data from database AppName.CubeName Level0 to data_file 'D:/Oracle/Administration/DataBackup/DataBackup_AppName_CubeName_File.txt ';

  echo "Completed data backup export";

  Instead of "Level0" in export command, use "All". The downside is that the export will be much more and much longer to run. Unless you have superior entry level data, you probably want to use this.

  Sabrina

• How do I change the ownership of semi-automatic prompts by default in the my account settings for all users

  Hi all

  After changing the instanceconfig.xml to configure the autocomplete property in dashboard of guests, we were not able to get this work until we found this paper: https://support.oracle.com/epmos/faces/DocumentDisplay? & id = 1461398.1 and discovered that the problem was of our users had the AutoComplete property in my account set to off.

  Is it possible to change this property for all of our users on one-step (they can change it back off if they want to), or less this new connection users in OBIEE get this property to the value?

  Concerning

  Ana GH

  Check this link http://docs.oracle.com/cd/E28280_01/bi.1111/e10541/answersconfigset.htm#BABEIIEB

  Search SupportAutoComplete explanation.

  That is to say. For users created outside the WLS Console (OID, Siebel CRM, etc.), this does not happen.

• e-mail is not downloaded for all account when I click get mail

  When I opened TBird it downloads the e-mail from my old default account only. This problem started when I added a second account and it's my fault. Once that TBird is open if I click on "Get the message" l Thunderbird gets my email to my old defaultaccount only. I have to click on to get the Messages and use the arrow to select each account. For more info, I use a global Inbox and all of my mail goes to 'Local Folders'. If I remember well when I started using TBird somewhere in account settings, there is a checkbox that says download or pick up the mail account when getting mail. (Something to that effect. from TBird v2 or so.) I couldn't find this option when I searched for it in the account settings, I have TBird 37...

  Help to remedy this problem frustrating would be greatly appreciated.

  ~ resetXX

  menu (alt + T) tools > account settings > server settings, and then click the Advanced button.

• How to create the user account of readonly for all devices to CISCO ACS?

  Elements of strategy >

  ... >

  Authorization and permissions >

  The peripheral Administration >

  Shell profiles >

  Edit: 'ReadOnly '.

  I tried all levels of privilege, but I am unable to connect to the "asdm" with only the privilege to read.

  so, can someone help me?

  I'm not an expert on all devices, but I can tell you that while you can use a name of user and password to access all devices, you can't have a "generic" set of rules. AAA services operate different based on the model/platform. For example, ASAs, WLCs and Nexus devices are completely different compared to the standard IOS routers and switches. For this this situation (ASDM read-only), you must check for this useful post:

  https://supportforums.Cisco.com/message/853437

  Thanks for the note!

• Backup AAA for PIX

  I have a PIX with the following configuration:

  GANYMEDE + Protocol Ganymede + AAA-server

  AAA-server GANYMEDE + (inside) host 192.168.1.1 77777 timeout 5

  RADIUS Protocol RADIUS AAA server

  AAA-RADIUS (inside) host 192.168.1.1 Server 77777 timeout 10

  AAA-server local LOCAL Protocol

  AAA authentication GANYMEDE serial console +.

  AAA authentication enable console GANYMEDE +.

  order of AAA for authorization GANYMEDE +.

  AAA accounting correspond to aaa_acl inside RADIUS

  Everything works fine when the RADIUS server is available. When he is not available, I can log in with the username "PIX" and "password". The problem is, once I connected, I can't get permission to execute orders. Does anyone know of a command that is similar to the "if-certified" for routers that I can use?

  There is no method of backup for authorization for the PIX. As you know, if the RADIUS server is down, you can connect with "pix" and the password enable, but it doesn't help a permission. The only thing you can do is wait the GANYMEDE server back to the top. I'm sorry.

• Table tree ADF elements at all levels in nodeStamp facet

  Fusion Middleware Version: 11.1.1.5

  WebLogic: 10.3.5.0

  JDeveloper Build: Build JDEVADF_11.1.1.5.0_GENERIC_110409.0025.6013

  Project: Custom Portal Application WebCenter integrated with ADF custom workflows.

  Hello

  
  I have a problem with ADF Tree Table (af:treeTable) that if I add an item to a group under the facet "nodeStamp" he repeats for all levels in the tree even those outside the group.

  Overview:

  -3-master level / retail structure created using ADF business components (display objects 3 connected by 2 show links)

  -ADF Tree Table based on the master-detail

  -Requirement to indicate 3 levels of data in the first column tree

  -Table tree renders correctly showing the values for "node. FullName ',' node. DisplayValue' and ' node. HoursType' respectively in a tree of level 3.

  -When another element is added to the top node in the tree ("node. FullName') for example, some output text ('node. TimeBuildingBlockId'), it is displayed along components side ' node. DisplayValue' and ' node. HoursType' as well.

  Code snippet:

  < af:treeTable value = "#{bindings." Var PerPeopleFVO1.treeModel}' = 'node '.

  selectionListener = "#{bindings." PerPeopleFVO1.treeModel.makeCurrent}.

  rowSelection = "single" id = "tt1" styleClass = "AFStretchWidth."

  horizontalGridVisible = "true" verticalGridVisible = "true".

  disableColumnReordering = 'true' summary =' entered in the time sheet.

  displayRow = "selected" expandAllEnabled = "false".

  contentDelivery = 'immediate' autoHeightRows = '24 '.

  columnStretching = "column: column1 '.

  Binding = "#{pageFlowScope.TimecardMB.tree_binding}" >

  < f: facet name = "nodeStamp" >

  < af:column id = "c1" headerText = "Partner details" width = "500" >

  < af:group id = "g4" >

  < af:outputText value = "#{node." FullName}"id ="ot3"/ >

  < af:outputText value = "#{node." TimeBuildingBlockId}"id ="ot1"/ >

  < / af:group >

  < af:outputText value = "#{node." DisplayValue}"id ="ot4 ".

  inlineStyle = "color: Green;" make-weight: bolder; "/ >

  < af:outputText value = "#{node." HoursType}"id ="ot5"/ >

  < f: facet = 'filter' name / >

  < / af:column >

  < / f: facet >

  < f: facet name = "pathStamp" >

  < af:outputText value = "#{node}" id = "ot2" / >

  < / f: facet >

  < af:column FROM HERE... >

  Any ideas greatly appreciated.

  Hello

  Try to use a blender to distinguish three levels of the tree. You can have three different facets, three different af:group's.

  When you add at one level, it will not repeat in the other classes.

  Please see the excerpt below.

  selectionListener = "#{bindings." RefBusinessUnitView1.treeModel.makeCurrent}.

  rowSelection = "single" id = "t1" >

  facetName ="#{node.hierTypeBinding.viewDefName}">

  Alisson

• How to make a display virtual for all incoming messages from multiple accounts, just like in Opera Mail?

  I want to have a replica of the Opera e-mail function. This feature allows you to aggregate all shipments of all accounts of e-mail in a single virtual aggregated view.
  That is to say, we have 3 different e-mail accounts. Mozilla Thunderbird on a daily basis, I check if there is something again in the folder entering for the CPA. To do this, I click on the folder for each account. Now, what I want, is to click on a single folder where I would have a virtual aggregate view of the record entering for all these 3 accounts. I guess that, same thing can be done with different types of mail, such as:

  • Unread messages (after watching the mail, it automatically goes straight to aggregation 'Messages sent', below)
  • Read messages
  • Messages sent
  • Spam messages
  • Drafts, etc.

  There is also this interesting feature (virtual thing applies here as well) which allows to have a bird's-eye view of attachments across all accounts classified into different job descriptions, such as:

  • docs (xls, doc, ppt, etc.)
  • images (jpg, png, etc.)
  • Archives (zip, rar, etc.)

  More then that it would be even better to have characteristic labling discovers aggregation through all our. In other words, if we scored several important messages in, say, 2 accounts, those that must be considered in the same virtual aggregate view by name, for example, "important messages". Maybe even with flags, todos, etc..

  POP email accounts can be configured to use a global Inbox. Email IMAP accounts cannot.

  However, there are several 'views' in Thunderbird. I suggest you try "unified." This creates a Visual Inbox containing all messages in the Inbox with subfolders showing the individual mailbox, so you can always see them separately if necessary.

  through the menu bar;
  View > folders > unified

  Via the Menu icon
  Icon of the menu > folders > unified.

  This view would show all emails marked "Important", in order to sort by Tag.

• can I select a default font for menus dvd-'apply to all '. 2 selection doesn't seem to work.

  in Pre12 should I do to select a font by default for menus dvd-'apply to all... '. 2 selection doesn't seem to work. I want to use times new roman for everything and it's a pain scroll through the list of fonts for each title.  OR Alternatively - delete a large number of fonts in the list?

  grantham8

  What version of Premiere Elements you are using and on what computer operating system is running?

  The answer to your question "Pre12 can I select a default font for menus dvd.

  as I see that's no (any version).

  These are fonts, fonts siize and font color in the PSD file of the theme that is being back from the movie first elements Menu customization area. Either:

  a. do you the menu customization possibilities they present

  or

  b. If you want to than this menu always present with all by using the desired font, and then change PSD file of the theme on the hard drive (with Photoshop CS or higher).

  It is my understanding that Premiere Elements uses the fonts are fonts of Windows. Even if you could selectively delete all fonts in a given menu, I think that the end result would be a menu that didn't work rather than one that is lacking in your policy of survival because there was no other to select.

  Yet once, the police of a particular topic is predetermined by the police which was designed in the .psd for the menu file.

  If you want information on how to change the fonts of your theme at the .psd level, let me know the involved menu and details the police change., point by point, buttons, titles...

  Please review and consider.

  Thank you.

  RTA

• ORDER BY using for the column that is not in a select list of selection?

  Hi all.
  
  I have a selection list on an APEX at the apex.oracle.com page, and I would like to order by the value of the UnitOrder column.
  The SQL is:

  SELECT DISTINCT foodunit.name AS display_value, foodunit.foodunitid AS return_value
  FROM foodunit, food
  WHERE foodunit.foodid = :P18_FOODID
  ORDER BY foodunit.unitorder ASC;

  Of course, this code does not work. And since it's a selection list, I can't just add foodunit.unitorder to the SELECT statement. In addition, I can not get rid of the SEPARATE, because then for some reason, it tends to view an infinite amount of the same line...
  Order by UnitOrder is that all units that start with gram, mg, ml, kg,... etc., will be shown on top of the selection list. All other units of food will be shown on the second place and so on.
  The UnitOrder column contains 1 or 2 as the value. 1 is the value for all lines which should be displayed at the top of the list of selection, 2 is the value for the rest.
  
  So, what I want, it's all the lines in which the UnitOrder is 1, are displayed on top of the selection list. Usually only 2 list items get displayed in the list of selection at a time, depending on what food item a user has selected. The selection list is then refined to certain lines that match the foodid etc etc...
  
  If someone has an idea, I would be very happy to hear about it.

  I don't see a join between the tables of your foodunit and food. That would solve your problem of "endless amount"?

  (you can omit the food table of your selection)

• SQL in Question actually. Select the items for all 12 months

  I am creating a notification request where I SUMMARIZED all of the amounts in the database for all 12 mount and come up with a result even if it isn't a amount totaled. I created a table called monthsInYear that has the ID (unique identifier) 1-12 and the months of Jan - Dec. I want SUM to the amount per month and arrived to the top with 12 results (one per month).

  I tried the query below, but sometimes with only 1 month and all amounts amounted to him.

  March

  484714.13

  I use:

  SELECT monthsInYear.month, IFNULL (SUM (income.amount), 0) AS amount

  OF monthsInYear

  Income ON EXTRACT(MONTH FROM income.dateAdded) = monthsInYear.monthID LEFT OUTER JOIN

  WHERE income.orgID = 10031

  AND the YEAR (income. DateAdded) = '2011'

  ORDER BY EXTRACT (MONTH FROM income.dateAdded) CSA

  Can someone tell me what I am doing wrong. I much prefer something like:

  January 3000

  February 3000

  March 4000

  April 0

  Maybe 5000

  June 6000

  July 5465

  ....

  But when I run the present, it gives me total for only the months which have in total and not 0 for those that go up as null. Any ideas?

  ....

  Also tried

  SELECT m.month, IFNULL (SUM (i.cost), 0) AS amount

  I have getExpenses LEFT OUTER JOIN monthsInYear m

  ON m.monthID = EXTRACT (MONTH FROM i.dateAdded)

  WHERE orgID = 10031

  AND YEAR (i.dateAdded) = '2011'

  GROUP BY m.month

  ORDER BY EXTRACT (MONTH FROM i.dateAdded) CSA

  There are two problems. First of all, in your join tables are reversed. A LEFT JOIN returns all the records in the left table (spending) even if there is no matching record in the table to the right. What you want, it's the opposite. If the month table should be on the left side of the JOIN:

  ...

  OF monthsInYear m LEFT JOIN getExpenses i m.monthID = EXTRACTION (i.dateAdded MONTH)

  Second, when there is no corresponding record in the expense, the column values will be null. So as soon as you use one of the fresh fields in your WHERE clause, that is to say

  WHERE i.orgID = 10031

  AND YEAR (i.dateAdded) = '2011'

  ... these missing documents are deleted, because a null value is never equal to what it is. So you are denying the outer join altogether. You must move these conditions in the JOIN clause instead:

  SELECT m.month, IFNULL (SUM (i.cost), 0) AS amount

  MonthsInyear LEFT OUTER JOIN getExpenses m I have

  ON m.monthID = EXTRACT (MONTH FROM i.dateAdded)

  AND i.orgID = 10031

  AND YEAR = 2011 (i.dateAdded)

  GROUP BY m.month

  ORDER BY m.month

• If you set time machine to a single account on an iMac, and you have several accounts, he will return for all accounts?

  This is probably a stupid question, but I bought a WD cycloids and am set up time machine for that.  As we have a family mac with multiple accounts, only can I configure the back on 1 account in sys prefs to cover documents etc on the mac as a whole?

  Thank you very much of a technology luddite

  Time machine backup all drives connected locally on your Mac, maintain existing permissions for all users. You can add folders or Volumes it should pass to the blacklist.

  It can back up to any local or accessible via the network of road, including the drive Time capsule on a LARGE Airport Extreme Base Station. It can't Backup AND Restore properly from a NAS or disc attached to a 'short' Airport Extreme.

• How to get a password for all accounts - I have the cloud, I adjust, Apple store

  Can how I have a common password for all accounts from Apple?

  Use your Apple ID.

• Select tray 2 as the main tray for all functions

  I use the top tray for odd size media and want to set the lower plate (#2) in the Lac main for all functions presented. How this is done on my Officejet Pro 8600 Premium?

  Hello

  This can be done in the control panel of the printer and printing software

  To set up the trays

  in your PC

  1. you must select the option Auto tray in the printer software. If the printer is on a network

  and you set a default bin, the setting affects all users of the printer.

  On your printer

  1. make sure that the printer is turned on.
  2. tap (right arrow), press Setup, tap preferences and then select default
  Tray or tray Lock.
  3. click on OK or apply after changing settings of the desired tray.

  Above measures avaialbe in the manual, please see page 32 in http://h10032.www1.hp.com/ctg/Manual/c03026243.pdf

  Good impression

• How to unlock DEP; Window grey DEP balls; Want To «Turn On DEP for all programs» and Services except those I select

  Under Start, computer, properties, advanced, Control Panel, performance, settings, Data Execution Prevention (DEP)...  The functions of ball in gray and it seems that DEP is locked.  Yet one can disable DEP using bcdedit.exe that MS wrote a short article on how to do it.  I would like to use this select method rather then disable DEP on the entire machine.

  Someone knows how to fix this 'feature '?  Thank you.

  Open in administrator cmd

  If the DEP is grayed out then try this: this RUN cmd

  Activation:

  bcdedit.exe/set {current} nx AlwaysOn
  bcdedit.exe/set {current} nx optin

  To turn off:

  bcdedit.exe/set {current} nx AlwaysOff

  To turn on DEP for all programs and services except those I select.

  Click Add to add the programs (32-bit) that you do not want to use the DEP feature. Navigate to the .exe file of the program you want to add to the DEP exclusion list and select it, and then click Open.Click OK to apply.

  10. restart the computer to apply the changes