Essbase extraction rating using the routine of HAL
HelloI have a HAL routine that retrieves the level 0 members (and aliases corresponding) dimension and loads in an oracle table for further processing.
I'm unable to load all the members of level 0 in the table. Only about 4,000 off the loaded 8000 in the table (total count recovered by extracting the dimension thru essbase addin).
I also have the following exceptions (approx. 30) in the HAL exception log file.
14/08/2009 | 115720 | Application/database | Error | Excerpt from Standard Dimension | Native exception code # 1 = 1042006Error = 1033 Msg error Code = [Fri Aug 14 11:57:12 2009] server_name/Application/Database/username/Error (1042006) network [10048] error: could not connect to [server_name:1423]. The customer has expired waiting to connect to the Agent of analytical Services using the TCP/IP protocol. Check your network connections. Also, make sure that the values for server and port are correct
Essbase servers are running fine and other routines HAL are also running without network error.
In addition, please let me know if anyone has any help HAL / error guide is available on google.
Thanks in advance!
Hello
It may be a problem where too many connections try under windows, if that is the problem, you will need to make some registry changes.
1. on the start menu, click Run.
2. type regedit, then click OK.
3. in the Registry Editor window, click on the following directory:
HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\Tcpip\Parameters
4. in the Edit menu, click New, DWORD value.
The new value appears in the list of parameters.
5. type MaxUserPort and then press ENTER.
Double-click MaxUserPort.
6. in the Edit DWORD value window, follow these steps:
* Click Decimal.
* Enter 65534.
* Click OK.
7. in the Edit menu, click New, DWORD value.
The new value appears in the list of parameters.
8 type TcpTimedWaitDelay, and then press ENTER.
9. double-click on TcpTimedWaitDelay.
10. in the Edit DWORD value window, follow these steps:
* Click Decimal.
* Type 300
* Click OK.
11. close the Registry Editor window.
12 restart the server
See you soon
John
http://John-Goodwin.blogspot.com/
Tags: Business Intelligence
Similar Questions
-
Hi guys,.
We know that we can create partitions on the SERVER NAME, SERVER. AREA: PORT only and ESSBASECLUSTERN founded through the Regional service CONSOLE.
Now my question is how to do the same to CREATE or REPLACE the PARTITION script. By default, it's get created using SERVER. AREA: PORT only.
Here is my script that I use to create a partion.
CREATE or REPLACE REPLICATE one PARTITION "xxxx". "' xxxx ' AREA 'xxxxxxxx' SOURCEAREA to 'xxxx '. "' XXXX ' to 'WZ00339D' AS 'xxxxx' IDENTIFIED BY 'xxxxxxx' AREA"xxxxxx ";
Where WZ00339D is my name of essbase server.
Put it in the script is the following.
WARNING - 1023052 - Partition [WZ00339D:1423 Bullseye Sales] is not valid.
But the partition is created on essbase app - database with the SERVER. AREA: port only.
Partition part of orphaned partitions as am I try to open the partition under the name of the SERVER not only through the SERVER. Average Doman:port.
Partition be created under title
[WZ00339D.DOMAIN.com:1423.App.DB]-> [WZ00339D.DOMAIN.com:1423.App.DB]
FYI, the user id used as logins are created by using domain - they are not native users.
Please let me know how I have to have the syntax so that I can create a partition just as I help Regional service on the name of the SERVER console only.
Let me know I can provide more information, the entire reason to use a script to create a partition is to refresh the score by a fall and create a partition.
Roman
I solved this problem.
Its very simple all my code and approach was right.
Everything I did wrong is an active directory account to create the partition and check used a native account on EAS. If you log in with the account active directory - the partition is under the name of SERVER only.
-
How to extract pages using the software adobe reader 11?
Hello Webmasters,
I want to extract pages pdf with adobe reader. I'm currently using the version 11. Could someone please advice on this?
Thank you
Srinath
Adobe Reader has no such functionality; you will need Acrobat for that.
-
Can we use provider services talk to Essbase server by using the API
Hi all
I work with the API for essbase and thought if we could use the services of the provider to talk to Essbase using the API.
Is it possible anyway?
Second, the provider's services existed in older versions of Essbase?
Please suggestTake a look at using the essbase API Java that you can communicate with essbase via provider's services.
Before he was known as a provider of Services (version 9 and following), it was EDS (Essbase - Version 7 Deployment Services)See you soon
John
http://John-Goodwin.blogspot.com/ -
How to extract data using the xml data type
Hello
I tried the following example using the xml data type, but not the desired output.
could you please correct the query in order to obtain the necessary
CREATE TABLE TEST.EMP_DETAIL ( EMPNO NUMBER, ENAME VARCHAR2(32 BYTE), EMPDETAILS SYS.XMLTYPE )
I need to get the record for Empid = '2'Insert into EMP_DETAIL (EMPNO, ENAME, EMPDETAILS) Values (7, 'Martin', XMLTYPE('<Dept> <Emp Empid="1"> <EmpName>Kevin</EmpName> <Empno>50</Empno> <DOJ>20092008</DOJ> <Grade>E3</Grade> <Sal>3000</Sal> </Emp> <Emp Empid="2"> <EmpName>Coster</EmpName> <Empno>60</Empno> <DOJ>01092008</DOJ> <Grade>E1</Grade> <Sal>1000</Sal> </Emp> <Emp Empid="3"> <EmpName>Samuel</EmpName> <Empno>70</Empno> <DOJ>10052008</DOJ> <Grade>E2</Grade> <Sal>2530</Sal> </Emp> <Emp Empid="4"> <EmpName>Dev</EmpName> <Empno>80</Empno> <DOJ>10032007</DOJ> <Grade>E2</Grade> <Sal>1200</Sal> </Emp> </Dept> '));
Then tried the following query with no expected o/p
Thank you...SELECT a.empno,a.ename,a.empdetails.extract('//Dept/Emp/EmpName/text()').getStringVal() AS "EmpNAME", a.empdetails.extract('//Dept/Emp/Empno/text()').getStringVal() AS "EMPNumber", a.empdetails.extract('//Dept/Emp/DOJ/text()').getStringVal() AS "DOJ", a.empdetails.extract('//Dept/Emp/Grade/text()').getStringVal() AS "Grade", a.empdetails.extract('//Dept/Emp/Sal/text()').getStringVal() AS "Salary", a.empdetails.extract('//Dept/Emp[@Empid="2"]').getStringVal() AS "ID", a.empdetails.extract('//Dept/Emp[EmpName="Coster"]').getStringVal() AS "CHK" FROM emp_detail a where empno=7 AND a.empdetails.existsNode('//Dept/Emp[@Empid="2"]') =1
Karthick_Arp wrote:
I'm not very good at that... But if your XML code should not be more like thisSQL> Insert into EMP_DETAIL 2 (EMPNO, ENAME, EMPDETAILS) 3 Values 4 (7, 'Martin', XMLTYPE('
5 6 .. cut ..1 7Kevin 850 920092008 10E3 113000 12Why? It is perfectly valid to data as attributes rather than elements and also quite common for key values.
-
Cannot connect to Essbase Administration Services using the regional service console.
Hi all!
We work with the Oracle EPM 11.1.2.1 version and a few days ago our hard drive where are installed the oracle tools became full, breaking all my applications. Since then, we were not able to to connect/start of any application, including the WebLogic Server. In the oracle database, I found a papper «logic of starting web» about me They said that the security file is damaged and I followed the steps to recreate the security file (cwallet.sso) and then all the started application works well except the easconsole. When I try to connect it shows the message "failed to connect".
I would like to say that until the drive became fully all my application worked well. It comes to my development environment. My EAS Server works well because I am able to connect using the easconsole of my production environment.
Any idea?
Thanks since now!
Rafael MeloHave you tried to restart EssbaseAdminServices through the weblogic console?
-
I use a Mac Mini OS 10.11.3 (El Capitan) processor 2.5 GHz intel Core i5. With 16 GB of ram at 1600 MHz kDDR3. I down loaded the program I need and you used my (Mac) excellent program to load the cvs program sheet. However, the driver is contained in a 'exe' format and I can't or can extract my Mac to use this program. This driver is required to enable communication between my Mac and radio transceiver. The only option I see is to acquire a computer laptop windows to allow the use of this application unless there is a program bootable can I mix on an external hard drive and then use Bootcamp? Help please.
Try using CrossOver Mac, or install Windows in Boot Camp or an emulator such as VirtualBox or Parallels Desktop.
(139948)
-
In my application, I need to read NDEF records and launch the application if it is not open already. Earlier, I was using the NDEFMessageListener for the same and affecting the 'autoStart' true value. This did the job for me.
Now, we must also get the UID of the tag whose value can only be extracted by using the DetectionListener. Now the problem is, when I join the DetectionListener, there is no property as "autoStart" provided. Even if I managed to get the app open somehow, when the tag is detected, the Blackberry Smart Tags application popup comes, even if my application is running and processing the tag information.
I want to stop somehow the Blackberry Smart tags opening, when my application is not on the device.
Currently, I achieve this by registering the NDEFMessageListener and the DetectionListener, but since the
public void addNDEFMessageListener(NDEFMessageListener listener, int typeNameFormat, String recordType, boolean autoStart)
method is obsolete in the OS 7.1, and since a listener registration should do the job, I wanted to find a way to do away with all NDEFMessageListener.
That is right. To contact the label for information other than the payload NDEF presented via onNDEFMessageDetected (NDEFMessage msg) you will need the target returned by the method onTargetDetected(Target target) of the DetectionListener interface. You can then use either target.getProperties () to enumerate the list of properties associated with the target ( http://www.blackberry.com/developers/docs/7.1.0api/net/rim/device/api/io/nfc/readerwriter/Target.htm...) or use the target.getUri (), which can then be used to open a connection to the tag to read the data from, say, APDU via the tranceive() method.
-
ADF/authentication to connect using the security of ADF (with Page of custom Login)
Hi all!
I am trying to achieve a simple project where I need my Application users to open a session before access to these pages in the application.
I found some tutorials, but most of them manually added user security, and I need them to be ONLY on the database, because I use a Web service to retrieve the data.
Here is my business needs:
- Create a custom Login page, requesting identification by name of user and password information
- Extract data using the Webservice (this part is done)
- If the data matches a Session must be opened.
- Some data user as username, preferences... must be registered on a SessionBean
- The session must be opened up to disconnection of the user or the timeout.
Any tips/advice on how to set up the login page and follow the data Session and status?
PS: Using jdev 12 c
Best regards
Luis Cabaco
You can enable the ADF security in your application and configure the authenticator RDBMS on WLS.
http://Biemond.blogspot.BA/2008/12/using-database-tables-as-authentication.html
For the custom login page, see: https://docs.oracle.com/middleware/1213/adf/develop/adf-web-securing.htm#ADFFD2008
Dario
-
I would use Yuanti SC police for my web development project. However, my developer is not able to use the file .ttc I extracted from the library of fonts, and .ttf, .otf .woff formats not available anywhere on the web. Please, let me know how can I use this font for my project.
Thank you
Anton
Unless the site you develop is for the Asian market, I don't know why you want to use that particular font. The Basic, standard and digital alphabet punctuation glyphs has sans serif, Roman characters, but the rest is thousands of Kanji characters. While you can use the font .ttf and .otf and web fonts, it would be very unusual to use one so great. Pages should load quickly and 78 MB, with a value of faces to download for those who have connections slow Internet is not fast.
I would take a different font without serifs. There are literally thousands who look identical or virtually identical to Yuanti.
131 free and high quality without font serif to choose here. I'm sure you can find a desired.
-
Portege R100: extraction failure when you use the recovery disc 1
Hello
Restart of my r100 is an ongoing saga. I managed to acquire a px1055e with cable of 16-bit pcmcia card (also a bios updated to 1.6 just in case where). I tried to use my original recovery CD but I now get "failed to extract" always when disk 1 is in half way through the partition of loading. It is interesting to try a bootable windows xp cd and if my hard drive is damaged, what should I do.
Appreciate any help,
Adam
Hello Adam
You should try to use the facilities of Microsoft CD and see if the installation procedure will run at the end. It is not easy to say anything on the recovery of installation with a CD. May be defective CD or disk HARD making trouble.
Try to use the original Microsoft CD and let us know what happens. If the problem persists I would recommend you to check the HARD drive.
-
Can't unzip the files using the Windows Vista option extract all
I tried to unzip the files, I have downloaded from the Web site by using the context menu "extract all... "on the file. I have a Board error saying that the compressed (zipped) folder is empty. If I try a double click on the file, I get the message that the zip file is not valid. This has happened to every zip file I tried to unpack so far. The only files I can unpack so far are those I zipped myself using the context menu "send to folder of Compssed of-->" of Windows Vista. Any suggestions?
Hi Eddie Hersh,.
Thanks for choosing the Windows Vista Forum.
1 how long have you had this problem?
2. If it works well before?
Make sure that the download of the file is not corrupted.
You can perform the steps in the link below and check if it works.
Restore and return the file Association in Windows Vista if Original
1. click on start, and then type regedit in start search and press ENTER.
2. navigate to the following registry branch:
NtVersion ntVersion\Explorer\FileExts\ [ext]
Replace the [exe] with the real extension of the file you want to restore the file type association to return to the default Windows Vista original. If you unsure, simply browse through all the Sub-touche under FileExts.
3. delete the subkey named UserChoice.
4. exit the registry editor.
WARNING:
Change the settings of the REGISTRY can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the REGISTRY settings configuration can be solved. Changes to these settings are at your own risk...
Compress and uncompress files (zip files) - http://windowshelp.microsoft.com/Windows/en-US/Help/7050d809-c761-43d4-aae7-587550cd341a1033.mspx
Kind regards
Marnie.
-
Issue while loading data using the file Rules Essbase
Hi all
I am facing problem while loading data using the Rules file. In the rules file, I rejected several members in two areas (two dimensions). Now if I load the data using the rules file I'm getting errors for all members in the dataload.err file. If I reject mutiple members of a single field, the data load without settling errors in the dataload.err file.
I want to know how rmany members of several fields of ejection for loading data using the file Rules Essbase? Is it possible?
Okay, okay... I think that you must assign Global Select / reject Boolean in the parameters of loading data as 'Or':
-
Eloqua data extraction for use in the analytical software
Topliners,
I use Eloqua 9 and I would like to extract customer information on send individual email so that I can perform trend analyses & regression in analysis tools of data to third parties such as table & SPSS.
My hope is that I can extract the data from the customer (State / Zip Code / custom fields) and perform only basic e-mail statistics data (sent / open / click / etc...) using the email address as primary key.
Anyone who has tried to make such a report from Eloqua or used the API to send log extract / rewrite table / customer profile data for using third-party tools?
Any advice would be greatly appreciated.
Thank you
Corey Bauer
Hi Corey,.
You can watch export report planned for report admin and those to be transferred by ftp to your server. This will give you the Contact, Email and campaign reports reports.
Thank you
Amit
-
How to extract the values of the line full in the bean to support using the primary key
Hello
I have a table that has columns as plant_name, business planner email id and identification of email resident engineer. Here, Plant_name is the primary key.
Now, I have this plant's name slipped and dropped like selectonechoice (drop) on page jsff. In this user can select any name of 1 plant drop down.
Right now, I can go get plant in backing bean name, but I can't understand how business plan for extraction and identification of email of the engineer resident in this key primary-plant_name at the bean to support.
Please let me know if anyone has an idea in this regard.
JDeveloper version 11.1.1.6.0
Thanks in advance.
Sneha
Sneha211 wrote:
On the jsff page
required = "#{bindings." Plant.hints.Mandatory}.
shortDesc = "#{bindings." Plant.hints.ToolTip}.
ID = "soc1" unselectedLabel = "- Select -"
autoSubmit = 'true '.
Binding = "#{backingBeanScope.backingbean.plantbean}" > "
ID = "si1" / >
In backing bean
DCBindingContainer = lBindingContainer
(DCBindingContainer) BindingContext.getCurrent () .getCurrentBindingsEntry ();
DCIteratorBinding lBinding = lBindingContainer.findIteratorBinding("SupplierVO1Iterator");
NewRow row = lBinding.getCurrentRow ();
String aamplant1 = (String) newRow.getAttribute ("Plant");
Hi Sneha, you've written code for it
you have found the current line and the primary key then this line, then why you not not using this same rank to get the other attributes?
NewRow row = lBinding.getCurrentRow ();
String aamplant1 = (String) newRow.getAttribute ("Plant");
String businessPalnner = (String) newRow.getAttribute ("business_planner"); Returns the value of the same line
Engineer in String = (String) newRow.getAttribute ("engineer");
OR if your condition is like that-
you have a primary key field value, but you do not have the corresponding line, then you can get that line and it's attribute by using the primary key value
See - http://adfgouravtkiet.blogspot.in/2012/10/filtering-of-data-from-vo.html
Hope it helps
-Ashish
Maybe you are looking for
-
I have a simple application, I want to build. Currently I have a 8330, I would use the phone in topic as he test bench. Someone at - he comments?
-
What is IP?
-
Is it possible to transfer sounds standard, pre-loaded, notifying my old Curve 8900 to my new torch? I am looking for Notifier_Greeter and Notifier_Lucid, in particular.
-
EPSON Stylus T10 does not print with Windows 7 after works very well with Windows XP
My EPSON Stylus T10 printer, before I used with windows XP and it prints well now I have a new Windows 7 laptop, I downloaded a new driver compatible with Windows 7. It prints, but the problem is, it also print the report in each document set that p
-
G62 - 208 ca hard drive failure
I bought 2 identical two laptops HP G62 - 208CA (P/N xa505ua) for my boys for Christmas. Recently we have had problems with the gel. It started to freeze after half an hour or more, and the time before freezing seemed to lessen as the days passed.