Essentials Plus with 3 servers more than 192 GB?

Similar Questions

• vSphere Essentials Plus - with no no hosts file information.

  We recently bought Essentials Plus (ESXi4).

  To get working HA, I need to change my hosts file on both servers I use as ESXi4 keeps forgetting to put the hostname after the FULL domain name.

  That is to say, I get:

  x.x.x.x hostname.domain.com

  Instead of

  x.x.x.x hostname.domain.com hostname

  Modification of the file/etc/hosts to fix allows me to turn on HA.

  However.  Whenever I have restart a server, the file loses the game again host name on the rebooted server.

  Is there any solution for this?  Edit the hosts file after every reboot is a pain.

  We are in the installer restart so many phase.

  Why don't you just do your ESXes can be solved by the redundant DNS servers?

  ---

  MCSA, MCTS, VCP, VMware vExpert 2009

  http://blog.vadmin.ru

• What is the diffenrece between the Windows Defender and Microsoft Security Essentials? It is worth more than the other?

  Windows Defender vs Microsoft Security Essentials

  What is the diffenrece between the Windows Defender and Microsoft Security Essentials?  One is more recommended than the other or guarantee better security than the other? .. .or do they use the same definition files and also provide a safe protection?

  Please feel free to share your own opinions and thoughts on the comparison of the two programmes.  It would be much appreciated.

  If you run either of these two programs... That who and why?

  Thank you friends.

  Windows Defender is not an anti-virus program. MSE is a comprehensive security program and that you want to use.

• HP Officejet Pro 8600 Plus: HP Officejet Pro more than 8600 mysteriously went offline today

  Hi all.  Hoping that someone out there has experienced and solved the problem, I will describe.  We have a desktop computer with Windows XP Dell, a Dell laptop with Windows 8 and several iPhone 4.  We also have a quantum Verizon FIOS router, which we installed a week ago.  (We were able to print to the printer HP of all of our devices, once the new router has been installed).  Until today, all of our devices connected to the router and our range of HP printers.  Today, we cannot print anything for the HP printer.  We uninstalled and reinstalled the printer software.  We have followed all the steps HP print and Scan doctor.  We have unplugged the printer and the router and plugged them both back.  We rebooted all electronic devices.  We ran the network Test on the printer wireless and did get the message 'no problem found.  Congratulations on the success of your wireless printer setup. "All the results of the test came as a 'PASS '.  Still no luck.  The printer is 'offline' and none of our electronic devices even recognize it.  Any help would be welcome!

  Welcome to the HP community @FedupinVA,

  I saw your post on your connection on your HP Officejet Pro 8600 more problems, and I would help him.

  Try the steps in the link below, it offers the solutions to this problem. Please try all the steps and let me know the results, as well as the problems or the error codes that you met.

  HP Officejet Pro 251dw, 276dw and 8600 Printer Series - printer keeps no connection Wi - Fi

  I hope this helps.

  If this help will testify of my answer by hitting the thumbs to the top slot

  Click on the button "Accept as Solution" if I helped you reach a solution.

• How can I use the USB OTG key with my iphone more than 6 s?

  Hello dear,

  Unfortunately, IPhone is not support OTG flash drive with is very important to me and I want to know if there is a way to make it active or not at all!

  Would you please place a comment on that?

  Thank you

  Adel

  The iPhone does not support cables flash drives that you have discovered, but there are a variety of wireless readers that can be used with it in a similar way, this one for example:

  http://www.Amazon.com/SanDisk-wireless-smartphones-computers-SDWS4-064G-G46/DP/B 00ZCFYF2W/ref = sr_1_1? s = pc & ie = UTF8 & qid = 1458322490 & sr = 1-1 & keywords = wireless + flash + drive

• Send Email with attachment of more than 32K

  Hello
  I wanted to produce an output of a query and send the output as an attachment using [demo_mail | http://www.oracle.com/technology/sample_code/tech/pl_sql/htdocs/maildemo_sql.txt] package given on the Oracle website.
  
  The only part that I changed in this package is the values of the following 2 variables:
  
  smtp_host VARCHAR2 (256): = 'localhost ';
  smtp_domain VARCHAR2 (256): = "my_ompany_name.com";
  
  Then I said a PLSQL block anonymous to send the query output as an attachment in the email. Here is the PLSQL block.
  
  The mail is sent, but the query output (cursor) goes in the body of the message itself.
  
  Body of the email contains
  
  -7D81B75CCC90D2974F7A1CBD
  Content-Type: text/plain
  Content-Disposition: attachment; filename = "Arun.csv"
  Content-Transfer-Encoding: 7 bit
  
  < query result >
  
  -7D81B75CCC90D2974F7A1CBD-
  
  
  Oracle Version_
  
  SQL > select * from v version $;
  
  BANNER
  ----------------------------------------------------------------
  Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - Prod
  PL/SQL Release 10.2.0.1.0 - Production
  CORE 10.2.0.1.0 Production
  AMT for Linux: Version 10.2.0.1.0 - Production
  NLSRTL Version 10.2.0.1.0 - Production
  
  

  DECLARE
     lv_sender      VARCHAR2(200)  := '[email protected]';
     lv_recipients  VARCHAR2(200)  := '[email protected]';
     lv_subject     VARCHAR2(200)  := 'Attachement Test';
     lv_mime_type   VARCHAR2(200)  := 'text/plain';
     lv_priority    PLS_INTEGER    := NULL;
     lv_last        BOOLEAN        := FALSE;
     lv_count       NUMBER         := 0;
     lv_message     VARCHAR2(32000);
     lv_conn        utl_smtp.connection;
  
     CURSOR cur_query
     IS
     SELECT       col_1
           ||'|'||col_2
           ||'|'||col_3
           ||'|'||col_4
           ||'|'||col_5
           a
       FROM table_name;
       
  BEGIN
     lv_conn:=  demo_mail.begin_mail
                          (  lv_sender
                            ,lv_recipients
                            ,lv_subject
                            ,lv_mime_type
                            ,lv_priority
                          );
  
     demo_mail.begin_attachment
               ( lv_conn
                ,lv_mime_type
                ,FALSE          -- Means its not inline
                ,'Arun.csv'
                ,'7 bit'
               );
  
     FOR rec IN cur_query
     LOOP
        lv_message := lv_message||rec.a||chr(13);
        lv_count := lv_count + 1;
  
        IF ( MOD(lv_count,50) = 0 ) THEN
           demo_mail.write_text( lv_conn
                                ,lv_message
                               );
           lv_message := NULL;
        END IF;
     END LOOP;
  
     demo_mail.write_text ( lv_conn
                           ,lv_message
                          );
  
     demo_mail.end_attachment
              (  lv_conn
                ,TRUE
              );
  
     demo_mail.end_mail(lv_conn) ;
  END;
  /

  No problem with the code above, sending the output as inline th emessage body instead of an attachment?
  
  Concerning
  Arun
  
  Published by: Arun Kr Gupta on February 3, 2010 13:31
  Modified cursor name in executable section
  
  Published by: Arun Gupta of Kr on February 4, 2010 16:25

  Okay, I copypasted the demo_mail package and isn't available to me now on my own playground XE DB.
  Playing with (or: 'test') your example revealed that simply by making a few minor adjustments.
  Keywords are:
  -read the comments in the package header
  -mime-type
  -You'll love this link: http://www.oracle.com/technology/sample_code/tech/pl_sql/htdocs/mailexample_sql.txt

  Here's a simple test case that worked for me (after do downloadable several upsetting him ;)), you will see that you were already very close:

  DECLARE
     lv_sender      VARCHAR2(200)  := '[email protected]';
     lv_recipients  VARCHAR2(200)  := '[email protected]';
     lv_subject     VARCHAR2(200)  := 'Attachment Test';
  --   lv_mime_type   VARCHAR2(200)  := 'text/plain';
     lv_priority    PLS_INTEGER    := NULL;
     lv_last        BOOLEAN        := FALSE;
     lv_count       NUMBER         := 0;
     lv_message     VARCHAR2(32000);
     lv_conn        utl_smtp.connection;
  
     CURSOR cur_query
     IS
     SELECT dummy a
     from   dual
     connect by level <= 1000;
  
  BEGIN
     lv_conn:=  demo_mail.begin_mail
                          (   lv_sender
                            , lv_recipients
                            , lv_subject
                            , demo_mail.multipart_mime_type
                            , lv_priority
                          );
  
     demo_mail.begin_attachment
               ( lv_conn
                ,'text/html'
                ,FALSE          -- Means its not inline
                ,'test.csv'
                ,'7 bit'
               );
  
     FOR rec IN cur_query
     LOOP
        lv_message := lv_message||rec.a||chr(13);
        demo_mail.write_text( lv_conn,lv_message);
  --      lv_count := lv_count + 1;
  --      IF ( MOD(lv_count,50) = 0 ) THEN
  --         demo_mail.write_text( lv_conn
  --                              ,lv_message
  --                             );
  --         lv_message := NULL;
  --      END IF;
     END LOOP;
  
     demo_mail.end_attachment
              (  lv_conn
                ,TRUE
              );
  
     demo_mail.end_mail(lv_conn) ;
  END;
  /
  

  Keep in mind: I had to change your cursor for obvious reasons...
  Let us know how it works in your situation, because I was not tested with very large attachments (> 32 k).
  Well well, to be honest, this one (level <= 64000)="" is="" still="" running...but="" you="" know,="" i="" really="" could="" use="" a="" new=""> ;))

• need help with a degraded more than mask images XML

  I have a file which works fine by pulling images via XML data. I want to create a mask gradient using flash CS3, but I can't seem to get any sort of mask (solid or degraded) reacts with XML driven images.
  
  Download my FLA and other work files 845 kb
  
  

  Ah ok that explains why - you must set to export to the 8 player to use gradient masks. And you need to cache as bitmap to true so that the image also like:

  maskMC.cacheAsBitmap = true;
  imageMC.cacheAsBitmap = true;
  imageMC.setMask (maskMC);
  Stop();

• How can I save a web page without creating a dozen or more than tiny files, which is worse than Internet Explorer?

  When I try to save a web page in Firefox, I get about a dozen tiny files with any funny names cluttering up my documents folder and makes it difficult to find anything. It reminds me of the problems I used to have with Internet Explorer more than ten years ago. But at least IE was kind enough to collect all these files in a single folder named "files". Firefox them pouring everything in the folder my documents. Messy.

  Years, I discovered Opera, which offered a file format which combined the original html code with other files in a single file: the archives of the internet, with the extension instead of htm mht. I used Opera for years, but has recently become aware of the benefits of Firefox.

  A few days ago, I downloaded the latest version of Firefox and installed. I've been evaluating it since then. It looks good; I figured out (more or less) how Bookmarks work, and I'm getting used to the task bars.

  But when I try to save a page, I still have a deluge of tiny files cluttering up the target folder. Firefox stores pages in the form of archive, but only in the old scattered form. Of course, I could just save the html code only. Maybe it's the best thing, but it loses a lot.

  The chaos of the junky files cluttering my target folder is enough to send back me to Opera, despite its limitations.

  This extension allows for web pages saved in MHT format.
  
  https://addons.Mozilla.org/en-us/Firefox/addon/8051

• After using XP pro for more than five years, got a message "Not authentic".

  I had a store of the local computer to build my computer with Vista pro more than 5 1/2 years ago. Vista is is crushed so often that a few months later I had to remove it and install my old XP pro trustworthy. It worked without problem for the last 5 years and now I get the message not real like few others I've seen on this website. Unfortunately, I can't find my old drive (real) XP pro and the calendar is not good to reformat my drive right now since I'm in the middle of a project. Is there a solution to this problem? I've never had any problems with my old XP pro on old computer and do not know why this is happening now after 5 years of use contiguous. I appreciate your comments.

  Read the following article.  It is possible that this is your problem:

  "Windows XP on computers can be marked as not authentic when incorrect."
  or the corrupted data.dat file is present.
    <>http://support.Microsoft.com/kb/926333 >

  HTH,
  JW

• BlackBerry Torch 9800 Smartphone delete messages of text more than 30 days

  And there is no option that AT & T or I can find to turn it off. How can I say this piece of * beep * phone ever delete my text messages? Facebook is the only application that I installed and I have more of 300 MB of application space and several GB of data storage space. I don't have that too this problem with SMS, emails, more than 30 days are still on my phone. What is going on?

  In fact, I found it finally, but your information is wrong. You must go to the menu options (different from texting) Messages. Then under 'Actions and the message', you go down and and change the "days to keep Messages" 30 days Forever. The fact that the default value of 30 days is inexcusable. BlackBerry R Dum

• LRT224 impossible to deal simultaneously with more than one VPN tunnel?

  We have configured a client to gateway VPN tunnel group and six in the tunnels of single user gateway on a LRT224. Each unique connection works perfectly using Shrew soft client. But when we try to connect with a second tunnel, the first tunnel disconnects. It seems that the LRT224 cannot process more than one VPN tunnel at the same time? Is there any configuration, that we would have missed?

  TLR log seem to indicate that the Shrew Soft customers use all 192.168.30.0 that their IP address instead of a random IP address in this range.

  Try to set each Shrew Soft client with a specific IP address in the 192.168.30.1 - 50 rank instead of ' use virtual adapter and address randomly.

• H730P with more than 8 drives

  We have a range of R730xd servers with 2 x controllers RAID H730P, each with a 8 x 6 GB/s SSD attached. Servers are sold as servers '12 + 12' drive, and the chassis has bays for 4 more disks per controller.

  When I read the H730P specification, I see that it is described as a controller to 8 ports, that raises questions.

  (1) are all the bays of 12 drives in each "section" usable? So, I guess because the server is sold as '12 + 12'.

  (2) are all 12-Bay by controller managed by the H730P, or 4 of them accompany the ports on the motherboard? If so, which of them are that they have limited (put in cache, RAID support, performance,...)?

  Best regards
  Brian

  pcore

  Can all 12 drives operate at full 6 Gbps?

  Yes, all 12 drives can operate at 6 Gbps. If you want to get the full 12 GB/s SAS drives then you could fill a maximum of 8.

  pcore

  I thought 1 player would use 1 port, or does he shares somehow port? If so, 8 drives operate at full 6gbps any berries I use or do I have to consider?

  Yes, 8 ports use a form of port sharing. If you fill in more than 8 records 8 ports can divide. You can fill up to 16 drives per controller to achieve 6 Gbps. If you fill more than 16 that they will work to 3 Gb/s. Each port can support up to 4 devices.

  Thank you

• Calendar Creator more than Power UP software compatibility with W7 Pro operating system

  I am running Calendar Creator more than power upward on a laptop XP Pro (SP3) and Vista desktop. I upgraded a second office linking W7 Home Pro for compatibility features but can not get the W7Pro to run the calendar program. I went through the screens of compatibility W7Pro without success. I moved the program from one computer to another for years with no real problems so far. I LOVE my calendar program and need advice how to solve the problem of compatibility W7Pro.

  By the program area, some of the system requirements are as follows:

  80386 or higher IBM or compatible PC: 3MB RAM: Windows 3.0 or higher:

  Its a very old origonally program for win3.0 and could thus be a program 16 bits, and if you have win7 64 bit his will never run unless you use an emulator, such as DosBox.

  Basically, you can solve a problem of compatibility, otherwise that by getting an update of the program, if such exists, or using an emulator or virtual winxp, but one such solution will be more difficult than its worth (if even that works)

  Time to move and use the calendar provided in windows live essentials, or another more upto date schedule program

• Cannot start a virtual machine with more than 1 CPU socket added

  I've set up a few boxes of ESXi 5.5 with the free license in recent weeks, they have all been without problems so far. All 4 servers have the same exact hardware

  Environment:

  Dell Poweredge T620

  E5-2630 2 Intel CPU

  40 GB OF DDR3 ECC RAM

  ESXi is installed on 2 x 146 GB 15 K SAS drives RAID-1

  Data for virtual machines store are 8 x 600 GB 10 K SAS RAID-10 disc

  Guest operating system is Server2012r2 on all virtual machines

  Installed it on ESXi 3 previous were conducted with custom ESXi 5.5 Dell without problem.

  The 4th is where I will have questions. I used the following ESXi installed just in case there is a bug somewhere

  5.5 of VMware ESXi

  ESXi 5.5 customized by Dell

  5.5 U1 of VMware ESXi

  Any version of the ESXi I use I can't have a virtual machine to begin with more than 1 CPU socket added to it. The virtual machine does not start even the VMWare BIOS. I tried the Bios EFI as well with no luck. The error message I get in the events is ' fatal error VMware ESX: vcpu (vcpu-X)-X:VM - entry failed; Valid VMCS (error code 8). The vcpu-X is always another. I have attached the log file is created. If I give the VM 1 single processor TI starts very well. I'm at a loss as to what could be the issue.

  Problem is solved. I caught another server with identical hardware, verified it worked properly, then started to swap parts between them. Turned out to be CPU1. Once this has been replaced from a working server I have not had any problems. Warranty has been appealed.

  Thanks for all the help!

• Licenses to create a virtual machine is second with more than 8 cores?

  So, we have a machine with 4 physical Sockets with 16 cores on each. We bought 4 licenses of vmware's standard. Now, we saw early on that the number max of hearts that we assign to a virtual machine was 32, which isn't really a big problem, 32 is a lot for our needs. So we have a 32 core virtual machine running and some other smaller, but now when I try to create another virtual machine with more than 8 cores it tells me that I have insufficient licenses.

  Can anyone provide more information on that? If I can create a virtual machine with more than 8 cores, why I can't create a new one?

  He said authorized to 4 physical processors, so it's ok, it's using your Standard licenses.

  During the 60-day trial, you could create more large virtual machines, because the 60 days run with Enterprise Plus features. Now that you are using the standard license, you can create only 8 vCPU VMs.

  Solution:

  You should spend 5.5 ESXi. Your license will also work for 5.5 and you'll be able to create virtual machines with up to 64 vCPUs.

  Concerning