Establishment of a new iMac 27 "3.5 GHz (end of 2014)

Similar Questions

• my new iMac (retina 5K, 27 inches, end of 2015) 4 GHz Intel Core i7, 32 GB 1867 MHz DDR3, TB 3.12 Fusion Drive bluetooth not working do not message comes bluetooth is not available

  my new iMac (retina 5K, 27 inches, end of 2015) 4 GHz Intel Core i7, 32 GB 1867 MHz DDR3, TB 3.12 Fusion Drive bluetooth not working do not message comes bluetooth is not available

  Reset the SMC.

  Barry

• Wizard BootCamp 6.0.1 running on El Capitan 10.11.5 installs single partition BootCamp on the disc Fusion consisting of 128 SSD part G SSD and 3 TB of HARD drive on an iMac (retina 5K, 27 inches, end of 2014), but not the part of the HARD drive?

  How is it assistant BootCamp 6.0.1 running on El Capitan 10.11.5 installs single partition BootCamp on the disc Fusion consisting of 128 SSD part G SSD and 3 TB of HARD drive on an iMac (retina 5K, 27 inches, end of 2014), but not the part of the HARD drive?

  This has two questions:

  1 capacity of SSDS faster for Fusion drive has been reduced. Therefore less effective for the reader of the merger. For example if I need to create a partition of 80G for my windows bootcamp partition, only 48 G will be left in the drive of the merger.

  2. ability of the bootcamp windows partition becomes very limited, cannot be greater than 120 G.

  3. even when I try to fuse out of the drive of fusion in the 128 G SSD and 3 TB of HARD disk, and then run the BootCamp assistant to create the bootcamp partition start from scratch to reinstall El Capitan only on the HARD drive (without drive Fusion), it won't let me do anything, it just shows an error that says something like "a person has created additional partitions on this drive please select. another disc. But there is nothing else to choose.

  Before my (5 K, 27 inches, end of 2014 retina) to El Capitan Yosemite, I was able to use the previous version of the wizard BootCamp 5.x to create the partition, bootcamp on the drive of the merger. And it will be divided in the fuser unit in two and insert the Bootcamp partition (with the size I chose, which can go up to 1 TB) between two partitions of MAC OSX.

  The disk partitions resulting from it, will be the partition MAC OS x on the SSD, the partition MAC OS x on the HARD drive partition #1, partition MAC OS x on the HARD drive partition #3.

  Then there is the BootCamp partition on the HARD drive partition #2.

  Is there a way to get what I need?

  That is what has been described in this notice of two canoes?

  Installation of Windows on a Boot Camp partition on a drive of TB Fusion 3

  n-on-a-3-TB-fusion-drive http://twocanoes.com/Winclone/support/installing-Windows-on-a-Boot-Camp-partitio

  Thank you.

  After having worked on those weeks, I realized that I need very painfully (by first going back to Yosemite and bootcamp 5 to escape all the limitations of El Capitan and BootCamp 6) I want to share here. Someone at - it other smarter solutions welcome.

  Note these steps and mentioned drivers only work for my version of iMAC, retina 5K late 2014. If you have other material, please search on the web to see which driver will work first. And all of these steps are destructive and assumed that you first take backup. It is only shared for interest only. Readers will have to bear your own risk.

  A. take backup

  1. take a backup completes my iMac Fusion Drive using Time Machine. Then restart with a Yosemite USB installation and select Terminal from the menu on the top bar.

  B. fuse out of the merger in two physical disks drive: SSD + HDD

  1. in the terminal, type the commands in show what the logical volume group ID and the ID of the logical Volume of the disc fusion)

  Cs diskutil list

  2. in the terminal, type commands for the fuse of the fuser unit and separate them to an SSD and a HARD drive.  Note: All data will be destroyed in the drive of the merger. There are many articles in this community on how this could be done,

  diskutil cs deleteVolume Logical Volume ID

  CS diskutil remove logical Volume Group ID

  This should finish within 30 minutes. If you have taken more time, this means that your reader of fusion has been altered somehow.

  I hit this issue too.  To use this command to remove the fusion drive hung up, and I need to do the hard to scramble a few sections of data in the hard disk partition table using the controls to tell the OSX this hard drive is a new without partitions:

  Cat >/dev/random /dev/disk0 (where/dev/disk0 is the SSD)

  and repeat for disk1/dev/disk1 which is the HARD drive in my case).

  This command will not return anything, but expect to press Ctrl-Z to end after 1 minute.

  2 create independent partitions (non-fusionend) for the installation of OSX.

  Borne Terminal output, and select disk utility, in disk utility, select the drive to HARD disk (and not on the partition), you will see the error message and you will be asked if you want to fix the fuser unit, click on ignore. Then wipe the HARD drive to create a single 'extended OSX journaled"named"HARD drive".

  3. Repeat step 2, and then erase the SSD drive to create a single 'extended OSX journaled"named"SSD ".

  C. install on the HARD disk as drive didier autonomous not fusion.

  1. go to Yosemite install screen and proceed with the installation of a clean copy of Yosemite to the iMAC. then connect you.

  D. use BootCamp Yosemite f5 to install windows.

  1. launch Yosemite bootcamp.

  2. check the two checkboxes for creating the USB drive to install windows 7 or a later version, and to download the windows supports the Apple software.  Do not click on the last box to install or remove windows pie creating real bootcamp partition again.

  3. it may take several hours to complete this function of your internet b/w and also performance of your USB drive.

  4. If you install Windows 7 (like me), then the downloaded drivers will not work for you, this will cause the issue of the device driver appleDSS.sys does not like this driver and others are too recent for windows 7 to use.  Also, your keyboard and mouse may not work even if you try to plug in a USB external keyboard or a mouse. You need to replace the drivers downloaded by others (the Boot Camp 5.1.5769 drivers that I find in this link: Software Support of Boot Camp 5.1.5769.) (Note: this driver is material specific only works for my iMAC model).  Once you have downloaded it, copy the two files in the root directory of the USB installation to replace the original ones. It's specific and material available for download somewhere on the Apple Site.

  -From the Finder, delete the $WinPE$ and the Boot Camp of the FLASH PLAYER files.

  -Expand the old drivers for Boot Camp 5.1.5769 (two records and another file) on your desktop.

  -Copy the $WinPE$ and records of Boot Camp in the FLASH PLAYER.

  5. open Boot Camp Assistant again and only select the third option, install Windows 7.

  It will show you the screen to select what installation disk, select HARD drive.

  Then drag the slide bar to select the size of the Bootcamp partition for windows you want, knowing that there is a restriction for windows installed using training camp on a MAC that the last byte of the BootCamp partition must reside in the first byte of the 2.2 T of each physical hard drive.

  For my case, I need only 500G for bootcamp and leaving behind 1.7 to for my MAC OSX partition immediately after the bootcamp partition and an another 0.8 T MAC OSX partition after him. 1.7 TB and the partition of MAC OS x 0.8 TB well exploited in the meantime bootcamp partition, will be merged into a fusion drive by Bootcamp. Thus, you will end up with total 2.5 TB of disk space in a logical drive - fuser.

  Go to this link for more details on this subject: n-on-a-3-tb-fusion-drive http://twocanoes.com/winclone/support/installing-windows-on-a-boot-camp-partitio

  6. continue the process to partition the hard drive, then it will restart automatically in windows installation mode, install windows.

  7. once the installation is complete, check that windows is functioning correctly.

  E. Si you want to upgrade to windows 10 Windows 7.

  1 if you plan to upgrade to windows 10, you'll find that the windows IE v.8 7 is no longer works and had many problems to load the page.  Then when you try to download the latest version of Internet Explorer, you get an error that you need at least windows 7 SP1 to support the last IE.  Life is too complicated, just download the google Chrome browser, then search for download windows 10 and then run the Microsoft valuation tool to upgrade.

  2 but before upgrade you, unplug all your MAC USB drives, otherwise, you will find that, after having spent an hour downloading the windows 10 software, the upgrade will fail with the error "/ dynamicupdate...» ». It is an inexplicable mistake that no one seems to understand why. There are articles with proven results that the removal of all USB drives before running the windows 10 upgrade tool will correct this problem.

  F. reinstall OSX El Capitan

  Once your target windows system (if windows 7, windows 8 or windows 10) works very well.  You can continue to create again your Fusion drive and reinstall OSX El Capitan.

  1. Insert the install of OSX Yosemite rear USB to the iMAC, and then select Restart Windows, or stop, and then turn the MAC once again.

  2. When you hear the ringing tone, press on and hold down the option key for 10 seconds. Then you release.

  3. on the selection screen, select start Yosemite OSX install drive.

  4. after starting, do not proceed to install OSX El Capitan again. But select Terminal from the menu bar.

  5. in the terminal, type the command 'diskutil list cs' and you should see nothing to prove that there are no existing fusion drive yet.

  6 type the 'diskutil list' command to list all disks and partitions.

  The SSD has two partitions, the/dev/disk0s1 of EFI (209 MB) partition and the other/dev/disk0s2 of OSX partition we created in step B above, called SSD around 121 G.

  The HARD drive has two partitions, the/dev/disk1s1 of EFI (209 MB) partition and the other/dev/disk1s2 of OSX partition we created in step B above, called SSD.

  G. delete the logical storage of nucleus on the HARD disk drive and it refuses with the DSS to form a merger with faster performance disc

  1. Insert the install of OSX El Capitan rear USB to the iMAC, and then select Restart Windows, or stop, and then turn the MAC once again.

  2. When you hear the ringing tone, press on and hold down the option key for 10 seconds. Then you release.

  3. on the selection screen, select start Yosemite OSX install drive.

  4. after starting, do not proceed to install OSX El Capitan again. But select Terminal from the menu bar.

  5. in the terminal, type orders for (to show what are the logical volume group ID and the ID of the logical Volume of the logical drive). You should see the logical volume to basic storage group created using two partitions on the hard drive, 1.7 TB and TB 0.8 created when we run the Yosemite Bootcamp to install windows.

  Cs diskutil list

  6. in the terminal, type commands to delete logical drives from basic storage.  Note: All data will be destroyed in the logical drive.

  diskutil cs deleteVolume Logical Volume ID

  CS diskutil remove logical Volume Group ID

  7. tap "diskutil list" command lists all the resulting partitions. You should see that the HARD drive has the following partitions.

  / dev/disk0 (internal, physical):

  #: NAME SIZE TYPE IDENTIFIER

  0: GUID_partition_scheme * GB 121,3 disk0

  1: disk0s1 EFI EFI 209.7 MB

  2: Apple_HFS GB SSD 121.0 disk0s2

  / dev/disk1 (internal, physical):

  #: NAME SIZE TYPE IDENTIFIER

  0: GUID_partition_scheme * 3.0 to disk1

  1: EFI EFI 209.7 MB disk1s1

  2: Apple_HFS 1.7 Untitled TB disk1s2

  3: disk1s3 Apple_Boot Recovery 650.0 MB HD

  4: Microsoft database BOOTCAMP 503.0 GB disk1s4

  5: Apple_HFS 801,4 Untitled GB disk1s5

  8 type the following commands to create the logical volumes group, named "myLVG" (or the name) of fuser using the usable for OSX to the SSD and HDD partitions.

  diskutil cs to create "myLVG" disk0s2 disk1s2 disk1s5

  Note: Mark the group id of logical volume shown in the results.

  In my case, I want to book the last partition as standalone partition disk1s5 no-fusionend, so I can use it to raise the back, or format it in FAT32 to allow the exchange of data between the MAC and boot camp.

  So, I do not understand this last partition in the drive of the merger. in my case, the command that I used is: diskutil cs to create "myLVG" disk0s2 disk1s2

  9 create logical volumes named "Macintosh HD" (or you call it) on the logical volume group we just created for the reader of the merger.

  diskutil createvolume logical volume group ID jhfs cs + 'Macintosh HD' 100%

  10 command "diskutil cs type list" to check the resulting fusion drive created.

  CoreStorage groups of logical volumes (1 found)

  |

  + Logical Volume - Group F53C7A25-C2F3-4997-91E9-2E6B6BAB2E0E

  =========================================================

  Name: LVG

  Status: online

  Dimensions: 1815635525632 B (1.8 to)

  Free space: 90112 B (90.1 KB)

  |

  +-Physical volume E176873C-7C80-4759-8110-BA7307E0C4B3

  |   ----------------------------------------------------

  |   Index: 0

  |   Disc: disk0s2

  |   Status: online

  |   Dimensions: 120988852224 B (121.0 GB)

  |

  +-Physical volume 6535AC3C-DCF8-453F-AD47-98905538386E

  |   ----------------------------------------------------

  |   Index: 1

  |   Disc: disk1s2

  |   Status: online

  |   Dimensions: 1694646673408 B (1.7 to)

  |

  +--> Logical volume family F3D15F87-FB84-4B43-B2F2-E9EACC7C42D9

  ----------------------------------------------------------

  Encryption type: no

  |

  +--> Logical volume 0D807F6E-FB7C-418F-AAF4-EF3EA3525D10

  ---------------------------------------------------

  Disc: disk2

  Status: online

  Size (Total): 1809780178944 B (1.8 to)

  Reversible: no

  Name: Macintosh HD

  Volume name: Macintosh HD

  Content indicator: Apple_HFS

  LVG Type: Fusion, sparse

  11 exit the terminal, go back to OSX El Capitan install screen and select the name of the fuser unit 'Macintosh HD' proceed to begin the installation of the os x for installation.

  12. There will be a step in the installation ask you if you want to configure as a new computer, or restore from a time machine previous backup. Make your own choices it accordingly.

  13 once OSX El Capitan has been installed and you have finished restoring the data and custom configurations, you can enter the application of preferences to check if you see the icon of the "Startup" disk", and if you choose Startup BootCamp in the next reboot, you should be able to boot up to Windows without pressing and holding the button option when reboot and choose to start windows manually. Also, in windows, you should be able to click on the bootcamp Control Panel and select for a startup to OSX on the next reboot.

  14. one thing to be aware, if you install bootcamp in this way, the boot camp and the GUI utility disk in OSX El Capitan will not be able to adjust your settings. This means, if you need to touch anything or to readjust the size of the partition, you will need to do it again in step A. Alternatively, some how to get started with installing Mac OSX Yosemite USB, then adjust the partitions using similar commands shown in this article or other articles in this community.

  15. yet once please take personal responsibility on damage if you follow the instructions in this article.

• How to connect the iMac 27 inches 5 K (end of 2014) as PC monitor

  Hello

  How to connect the iMac 27 inches 5 K (end of 2014) as PC monitor?

  Are there any adapter or cable that can help?

  Concerning

  M

  PCs have no support for the target Display Mode.

• I have 6 s phone is not connected to the iMac (retina 5K, 27 inches, end of 2014) using bluetooth

  Hi every time I try to connect my i phone 6s with iMac (retina 5K, 27 inches, end of 2014) performances

  connection failure ' jatin iMac is not supported.

  Pls help its strange

  Connect an iPhone to a computer is not supported.  Has never been.

  Bluetooth: Why can't connect my iPhone or iPad with another iOS device or my computer?

• poor performance on iMac (retina 5K, 27 inches, end of 2014)

  Dare I excessing minimum retouching / process, things will slow down and drag until it turns into hours of work for anything that might take some minutes. It's time I lose and cannot charge my clients for without getting bit professional looking and that's really where things turn upside down.

  I was check my hardware to make sure that everything runs well, and he went.

  I'm on the latest versions of the software OS and Lightroom. 32 GB of RAM, 4 GHz Intel Core i7

  summer with Adobe support twice, without result. tried to start a new catalogue on different disks... nothing.

  one recommendation, I had was to work with internal and no external control. I can't believe that this must be a problem because all my external references are love at first sight.

  sure that I have everything listed here fact > > How to improve and accelerate the performance of Photoshop Lightroom

  tried with and without openGL...

  now, I just need to know if it is just formally a question I have to live with that and if so, would have been great if Adobe came out to admit that something does not work completely in the match of their software and this material.

  would love to hear your opinions about it and always hope that a magic is going to prove me wrong.

  Thank you very much!

  Many people say that they are on the latest version of Lightroom and when we ask questions, we discover that they are not on the latest version of Lightroom. So, please tell us the VERSION NUMBER of your Lightroom.

  1. You don't mention GPU, what GPU do you have?
  2. Is acceleration GPU turned on or off?
  3. You do a lot of brushing or spot healing on your photos?

• iMac 5K (end of 2014) is not supported this machine OpenCL?

  The iMac (retina 5K, 27 inches, end of 2014) with AMD Radeon R9 M290X 2048 MB graphics card would not support OpenCL?

  Yes. The Mac supports OpenCL. You ask because you heard something to the contrary.

  Russ

• Why are the 'minor' photos in the new iMac with K5 of the retina (using photoshop)?

  In English

  Hello.

  I met a 'problem' with the new iMac (retina 5K, 27 ", at the end of 2015).

  When I edit pictures in Photoshop, I can't get the images blown up big enough and the fillings of slide show they do not rule out even at a size of 72 dpi and with dimensions of 3000 x 2000.

  What don't I understand?

  Help would be so nice, thank you in advance.

  By Bjarne.

  PA Dansk

  Hej.

  JEG er pa stodt and 'problem' med den nyeste iMac (retina 5K, 27 ', ultimo 2015).

  NAR jeg redigerer billeder I Photoshop kan jeg ikke fa billederne blaest stort nok op og ved diasshow fylder ikke skaermen ud ved en str pa 72 dpi library pa med og selv 3000 x 2000.

  Hvad er det jeg ikke forstar?

  Tants city limit his BRA, pa forhand tak.

  By Bjarne.

  What version of the operating system and Photos do you use? Exactly how do you get pictures of Photos in Photoshop?

  LN

• My new iMac El Capitan 2015

  El Capitan is very slow at startup

  I downloaded Etrecheck and here are the results for slow el capitan has achieved results but don't know how to reach

  I'm new iMac w

  Click on the button "Report share" in the toolbar, select "Copy to Clipboard" and then paste into a response.

• best way to put in place a new iMac with saved files?

  Hi all

  I'm new here so please forgive me if I've done something wrong. Just recently got a new iMac and wanted to get all my software work of music and other files installed. I used the Migration Assistant on the iMac to move files from a recent time Machine to the top of my Macbook Pro. After what seemed to be a successful migration, I noticed that Garageband, iMovie and a few other products Apple should be updated. My new iMac has been updated the newer versions until the migration wizard has been used. My questions are, it's best to go on a new set up, and never has that somehow restored my new machine settings to the previous settings of the Macbook Pro? Would it have changed anything wise speed or image and sound quality wise? of resolution, depth of bit or similar?

  Thanks in advance for any help or answers.

  Dave

  What is the best way to ride on a new together

  Yes.  Other resources - move your content to a new Mac - Apple Support and
  A new Mac set up an ancient, its backups or PC

  Software, Apple and 3rd party will need to be updated to work with your new OS System.  You can visit RoaringApps which will make easier verification.

  

• I can connect new iMAC (A1418) on my Win10 to use the iMAC monitor?

  Can I connect my new iMAC (A1418) to my Win10 so the Win10 can use the iMAC monitor?

  Read the article to use your iMac as a display with the target - Apple Support Display Mode Apple. Apple described the iMacs will work. You will probably find that you get an external display to work with your Windows machine.

• Migrate messages from the Macbook Air to new iMac 2012 2016

  How can I migrate all my messages (text, iMessage) of my Macbook Air to my new iMac 2012 2016? I have a lot of messages on my laptop and I want to migrate them to my iMac just to have them for reference/memory later. I do this because I would like to activate the monthly updating of message on my iPhone, so he won't have to queue all my messages it years ago and I am also reformat my old Macbook Air. Is there a way to do this? Thank you!

  Messages and e-mail accounts and data are found in/Home/Library/Messages/and/Home/Library/Mail/files. Just copy the content to the same folders on the new computer.

  Or you can migrate your complete folder from the old computer to the new home. This can be done using the love at first sight between the two cable and on the new computer using target disk Mode use the Migration Wizard to migrate your application. It could also be run from a time Machine or another external backup drive.

  Migration will not overwrite any user account that has already been created on the new computer. MY simply creates a new Admin user account name. You will then need to switch to the newly migrated account.

• looking to buy the new iMac, advice?

  I use a Macbook Pro, 2.8 quad core 16 GB RAM. Memory flash 512 + 27 "scree of love at first sight, but I'm looking to buy a new iMac to replace, is there a new should be out? It will be physically larger?   64gbRAM?

  When it comes out?

  Apple said nothing about the new iMacs to come.

  and we are not allowed to speculate on such things in these forums.

  If you can wait until in October, when the new Mac is generally revealed.

• Why did all of my files migrate to my new iMac using Time Machine?

  I recently bought a new iMac and used Time Machine to transfer my data from my Macbook.  Why not a not transfer files of Pages, Numbers and Keynote?  Why all three have a? on the dock?

  Files transferred without doubt, but the Dock shortcuts are not connected to them.

  Try to remove these shortcuts from the Dock and replace them with news from your Applications folder.

• Should I buy a new iMac?

  I currently have an iMac that I bought in February ' 08. It has 2 GHz Intel Core 2 Duo and 4 GB 667 MHz DDR2 SDRAM. I'm on OS 10.6.8.  I upgraded the memory a few years ago.  Things seem to become a little slow on this subject. We may need the latest version of numbers that supposedly requires OS X 10.10.4.  Should I buy a new iMac, or are there things I can do to improve and accelerate and hold remote buying a year or two?  If I buy an iMac, should I buy a new airport because my current one is almost as old as the Mac?

  Thank you

  The airport should be fine, unless you have the intention to improve your Internet connection at Gigabit speeds... WiFi has not changed that much.

  It's probably a good idea to consider a new Mac in the near future, however. This one is about the end of his life.