iMac 5K (end of 2014) is not supported this machine OpenCL?
The iMac (retina 5K, 27 inches, end of 2014) with AMD Radeon R9 M290X 2048 MB graphics card would not support OpenCL?
Yes. The Mac supports OpenCL. You ask because you heard something to the contrary.
Russ
Tags: Professional Applications
Similar Questions
-
How is it assistant BootCamp 6.0.1 running on El Capitan 10.11.5 installs single partition BootCamp on the disc Fusion consisting of 128 SSD part G SSD and 3 TB of HARD drive on an iMac (retina 5K, 27 inches, end of 2014), but not the part of the HARD drive?
This has two questions:
1 capacity of SSDS faster for Fusion drive has been reduced. Therefore less effective for the reader of the merger. For example if I need to create a partition of 80G for my windows bootcamp partition, only 48 G will be left in the drive of the merger.
2. ability of the bootcamp windows partition becomes very limited, cannot be greater than 120 G.
3. even when I try to fuse out of the drive of fusion in the 128 G SSD and 3 TB of HARD disk, and then run the BootCamp assistant to create the bootcamp partition start from scratch to reinstall El Capitan only on the HARD drive (without drive Fusion), it won't let me do anything, it just shows an error that says something like "a person has created additional partitions on this drive please select. another disc. But there is nothing else to choose.
Before my (5 K, 27 inches, end of 2014 retina) to El Capitan Yosemite, I was able to use the previous version of the wizard BootCamp 5.x to create the partition, bootcamp on the drive of the merger. And it will be divided in the fuser unit in two and insert the Bootcamp partition (with the size I chose, which can go up to 1 TB) between two partitions of MAC OSX.
The disk partitions resulting from it, will be the partition MAC OS x on the SSD, the partition MAC OS x on the HARD drive partition #1, partition MAC OS x on the HARD drive partition #3.
Then there is the BootCamp partition on the HARD drive partition #2.
Is there a way to get what I need?
That is what has been described in this notice of two canoes?
Installation of Windows on a Boot Camp partition on a drive of TB Fusion 3
Thank you.
After having worked on those weeks, I realized that I need very painfully (by first going back to Yosemite and bootcamp 5 to escape all the limitations of El Capitan and BootCamp 6) I want to share here. Someone at - it other smarter solutions welcome.
Note these steps and mentioned drivers only work for my version of iMAC, retina 5K late 2014. If you have other material, please search on the web to see which driver will work first. And all of these steps are destructive and assumed that you first take backup. It is only shared for interest only. Readers will have to bear your own risk.
A. take backup
1. take a backup completes my iMac Fusion Drive using Time Machine. Then restart with a Yosemite USB installation and select Terminal from the menu on the top bar.
B. fuse out of the merger in two physical disks drive: SSD + HDD
1. in the terminal, type the commands in show what the logical volume group ID and the ID of the logical Volume of the disc fusion)
Cs diskutil list
2. in the terminal, type commands for the fuse of the fuser unit and separate them to an SSD and a HARD drive. Note: All data will be destroyed in the drive of the merger. There are many articles in this community on how this could be done,
diskutil cs deleteVolume Logical Volume ID
CS diskutil remove logical Volume Group ID
This should finish within 30 minutes. If you have taken more time, this means that your reader of fusion has been altered somehow.
I hit this issue too. To use this command to remove the fusion drive hung up, and I need to do the hard to scramble a few sections of data in the hard disk partition table using the controls to tell the OSX this hard drive is a new without partitions:
Cat >/dev/random /dev/disk0 (where/dev/disk0 is the SSD)
and repeat for disk1/dev/disk1 which is the HARD drive in my case).
This command will not return anything, but expect to press Ctrl-Z to end after 1 minute.
2 create independent partitions (non-fusionend) for the installation of OSX.
Borne Terminal output, and select disk utility, in disk utility, select the drive to HARD disk (and not on the partition), you will see the error message and you will be asked if you want to fix the fuser unit, click on ignore. Then wipe the HARD drive to create a single 'extended OSX journaled"named"HARD drive".
3. Repeat step 2, and then erase the SSD drive to create a single 'extended OSX journaled"named"SSD ".
C. install on the HARD disk as drive didier autonomous not fusion.
1. go to Yosemite install screen and proceed with the installation of a clean copy of Yosemite to the iMAC. then connect you.
D. use BootCamp Yosemite f5 to install windows.
1. launch Yosemite bootcamp.
2. check the two checkboxes for creating the USB drive to install windows 7 or a later version, and to download the windows supports the Apple software. Do not click on the last box to install or remove windows pie creating real bootcamp partition again.
3. it may take several hours to complete this function of your internet b/w and also performance of your USB drive.
4. If you install Windows 7 (like me), then the downloaded drivers will not work for you, this will cause the issue of the device driver appleDSS.sys does not like this driver and others are too recent for windows 7 to use. Also, your keyboard and mouse may not work even if you try to plug in a USB external keyboard or a mouse. You need to replace the drivers downloaded by others (the Boot Camp 5.1.5769 drivers that I find in this link: Software Support of Boot Camp 5.1.5769.) (Note: this driver is material specific only works for my iMAC model). Once you have downloaded it, copy the two files in the root directory of the USB installation to replace the original ones. It's specific and material available for download somewhere on the Apple Site.
-From the Finder, delete the $WinPE$ and the Boot Camp of the FLASH PLAYER files.
-Expand the old drivers for Boot Camp 5.1.5769 (two records and another file) on your desktop.
-Copy the $WinPE$ and records of Boot Camp in the FLASH PLAYER.
5. open Boot Camp Assistant again and only select the third option, install Windows 7.
It will show you the screen to select what installation disk, select HARD drive.
Then drag the slide bar to select the size of the Bootcamp partition for windows you want, knowing that there is a restriction for windows installed using training camp on a MAC that the last byte of the BootCamp partition must reside in the first byte of the 2.2 T of each physical hard drive.
For my case, I need only 500G for bootcamp and leaving behind 1.7 to for my MAC OSX partition immediately after the bootcamp partition and an another 0.8 T MAC OSX partition after him. 1.7 TB and the partition of MAC OS x 0.8 TB well exploited in the meantime bootcamp partition, will be merged into a fusion drive by Bootcamp. Thus, you will end up with total 2.5 TB of disk space in a logical drive - fuser.
Go to this link for more details on this subject: n-on-a-3-tb-fusion-drive http://twocanoes.com/winclone/support/installing-windows-on-a-boot-camp-partitio
6. continue the process to partition the hard drive, then it will restart automatically in windows installation mode, install windows.
7. once the installation is complete, check that windows is functioning correctly.
E. Si you want to upgrade to windows 10 Windows 7.
1 if you plan to upgrade to windows 10, you'll find that the windows IE v.8 7 is no longer works and had many problems to load the page. Then when you try to download the latest version of Internet Explorer, you get an error that you need at least windows 7 SP1 to support the last IE. Life is too complicated, just download the google Chrome browser, then search for download windows 10 and then run the Microsoft valuation tool to upgrade.
2 but before upgrade you, unplug all your MAC USB drives, otherwise, you will find that, after having spent an hour downloading the windows 10 software, the upgrade will fail with the error "/ dynamicupdate...» ». It is an inexplicable mistake that no one seems to understand why. There are articles with proven results that the removal of all USB drives before running the windows 10 upgrade tool will correct this problem.
F. reinstall OSX El Capitan
Once your target windows system (if windows 7, windows 8 or windows 10) works very well. You can continue to create again your Fusion drive and reinstall OSX El Capitan.
1. Insert the install of OSX Yosemite rear USB to the iMAC, and then select Restart Windows, or stop, and then turn the MAC once again.
2. When you hear the ringing tone, press on and hold down the option key for 10 seconds. Then you release.
3. on the selection screen, select start Yosemite OSX install drive.
4. after starting, do not proceed to install OSX El Capitan again. But select Terminal from the menu bar.
5. in the terminal, type the command 'diskutil list cs' and you should see nothing to prove that there are no existing fusion drive yet.
6 type the 'diskutil list' command to list all disks and partitions.
The SSD has two partitions, the/dev/disk0s1 of EFI (209 MB) partition and the other/dev/disk0s2 of OSX partition we created in step B above, called SSD around 121 G.
The HARD drive has two partitions, the/dev/disk1s1 of EFI (209 MB) partition and the other/dev/disk1s2 of OSX partition we created in step B above, called SSD.
G. delete the logical storage of nucleus on the HARD disk drive and it refuses with the DSS to form a merger with faster performance disc
1. Insert the install of OSX El Capitan rear USB to the iMAC, and then select Restart Windows, or stop, and then turn the MAC once again.
2. When you hear the ringing tone, press on and hold down the option key for 10 seconds. Then you release.
3. on the selection screen, select start Yosemite OSX install drive.
4. after starting, do not proceed to install OSX El Capitan again. But select Terminal from the menu bar.
5. in the terminal, type orders for (to show what are the logical volume group ID and the ID of the logical Volume of the logical drive). You should see the logical volume to basic storage group created using two partitions on the hard drive, 1.7 TB and TB 0.8 created when we run the Yosemite Bootcamp to install windows.
Cs diskutil list
6. in the terminal, type commands to delete logical drives from basic storage. Note: All data will be destroyed in the logical drive.
diskutil cs deleteVolume Logical Volume ID
CS diskutil remove logical Volume Group ID
7. tap "diskutil list" command lists all the resulting partitions. You should see that the HARD drive has the following partitions.
/ dev/disk0 (internal, physical):
#: NAME SIZE TYPE IDENTIFIER
0: GUID_partition_scheme * GB 121,3 disk0
1: disk0s1 EFI EFI 209.7 MB
2: Apple_HFS GB SSD 121.0 disk0s2
/ dev/disk1 (internal, physical):
#: NAME SIZE TYPE IDENTIFIER
0: GUID_partition_scheme * 3.0 to disk1
1: EFI EFI 209.7 MB disk1s1
2: Apple_HFS 1.7 Untitled TB disk1s2
3: disk1s3 Apple_Boot Recovery 650.0 MB HD
4: Microsoft database BOOTCAMP 503.0 GB disk1s4
5: Apple_HFS 801,4 Untitled GB disk1s5
8 type the following commands to create the logical volumes group, named "myLVG" (or the name) of fuser using the usable for OSX to the SSD and HDD partitions.
diskutil cs to create "myLVG" disk0s2 disk1s2 disk1s5
Note: Mark the group id of logical volume shown in the results.
In my case, I want to book the last partition as standalone partition disk1s5 no-fusionend, so I can use it to raise the back, or format it in FAT32 to allow the exchange of data between the MAC and boot camp.
So, I do not understand this last partition in the drive of the merger. in my case, the command that I used is: diskutil cs to create "myLVG" disk0s2 disk1s2
9 create logical volumes named "Macintosh HD" (or you call it) on the logical volume group we just created for the reader of the merger.
diskutil createvolume logical volume group ID jhfs cs + 'Macintosh HD' 100%
10 command "diskutil cs type list" to check the resulting fusion drive created.
CoreStorage groups of logical volumes (1 found)
|
+ Logical Volume - Group F53C7A25-C2F3-4997-91E9-2E6B6BAB2E0E
=========================================================
Name: LVG
Status: online
Dimensions: 1815635525632 B (1.8 to)
Free space: 90112 B (90.1 KB)
|
+-Physical volume E176873C-7C80-4759-8110-BA7307E0C4B3
| ----------------------------------------------------
| Index: 0
| Disc: disk0s2
| Status: online
| Dimensions: 120988852224 B (121.0 GB)
|
+-Physical volume 6535AC3C-DCF8-453F-AD47-98905538386E
| ----------------------------------------------------
| Index: 1
| Disc: disk1s2
| Status: online
| Dimensions: 1694646673408 B (1.7 to)
|
+--> Logical volume family F3D15F87-FB84-4B43-B2F2-E9EACC7C42D9
----------------------------------------------------------
Encryption type: no
|
+--> Logical volume 0D807F6E-FB7C-418F-AAF4-EF3EA3525D10
---------------------------------------------------
Disc: disk2
Status: online
Size (Total): 1809780178944 B (1.8 to)
Reversible: no
Name: Macintosh HD
Volume name: Macintosh HD
Content indicator: Apple_HFS
LVG Type: Fusion, sparse
11 exit the terminal, go back to OSX El Capitan install screen and select the name of the fuser unit 'Macintosh HD' proceed to begin the installation of the os x for installation.
12. There will be a step in the installation ask you if you want to configure as a new computer, or restore from a time machine previous backup. Make your own choices it accordingly.
13 once OSX El Capitan has been installed and you have finished restoring the data and custom configurations, you can enter the application of preferences to check if you see the icon of the "Startup" disk", and if you choose Startup BootCamp in the next reboot, you should be able to boot up to Windows without pressing and holding the button option when reboot and choose to start windows manually. Also, in windows, you should be able to click on the bootcamp Control Panel and select for a startup to OSX on the next reboot.
14. one thing to be aware, if you install bootcamp in this way, the boot camp and the GUI utility disk in OSX El Capitan will not be able to adjust your settings. This means, if you need to touch anything or to readjust the size of the partition, you will need to do it again in step A. Alternatively, some how to get started with installing Mac OSX Yosemite USB, then adjust the partitions using similar commands shown in this article or other articles in this community.
15. yet once please take personal responsibility on damage if you follow the instructions in this article.
-
Can someone tell me how to set up an Airport Express Terminal to expand Network provided by my Fios router/modem without going through an airport as a base? I understand that apple does not support this use, but my applecare Advisor said it's possible. Thank you!
Unfortunately, your AppleCare Advisor is wrong if he or she has told you that an AirPort Express to extend wireless signal of a Fios router/modem.
Function of "Extend a wireless network" Apple is an exclusive feature that was designed by Apple engineers to extend the signal from another wireless only router from Apple. Thus, the AirPort Express... or any other router Apple besides... would not be able to extend wireless a Fios network.
SO... you have the possibility to locate the Airport Express where it is needed... And... Connect it to the Fios router/modem with a permanent, wired Ethernet cable connection, then the AirPort Express can 'extend' in this way.
Or... If you are ready to add a second AirPort Express, connect the first near Fios modem/router with an Ethernet cable, then the second Airport Express could extend the signal first Express wireless.
Another way to say the same thing, is that if you want an Apple AirPort router to extend wireless network... then you need two Apple routers to achieve this goal.
-
Satellite R830-143 - update of the BIOS does not support this operating system
Hello
I received a notification via Tempro that he did not have a BIOS upgrade. I downloaded the ZIP file (bios - 20120209125153.zip), extract the package (BIOS360_EC140_WIN.exe) and ran it according to the instructions.
The package runs, give the progress bar "extract files...". ", then displays a dialogue entitled"TOSHIBA BIOS package Ver.4.1.2"that says:"this package BIOS does not support this operating system."
I am running Windows 7 Home Premium 64 - bit on a Satellite 830R-143 with the short part No. PT32LE
Does anyone know what is the problem?
Thanks in advance for your help...
Hello
You have problems with the laptop?
If not then why you want to do the BIOS? Just because the new BIOS is released?
I would not change anything if my laptop is running correctly.However, the update of the BIOS requires the VAP (value added package).
So remember that this PPV is installed correctly. If this isn't the case, so far. -
System recovery disks do not support this computer
Two weeks ago, crashed my HP Pavilion Elite HPE - 480 t hard drive model. It is a 1.5 TB came with the PC. I bought a WD 1 TB hard drive and installed. When I used my recovery discs, I received a message, "the system recovery disks do not support this computer. You are not able to restore this system with these discs. "Because I had never used these recovery discs, I assumed I had their damn so I bought authentic system recovery disks from HP. Yesterday them - even received training as before. I called HP tech support and I was told that those recovery disk works with a hard drive that is identical with the original hard drive. Located between the two hard drives that the original HD had a 3 GB/s, and the new is 6 Gbps. Is this correct? They "graciously" offered replacing my new hard drive with a hard drive that works for only $180. Seems a little steep, but I am confused. Is system of technical recovery disks? I would like another opinion. If buying a new motherboard out me of this? If someone knows a resolution to my situation, I would be very grateful. Help!
Hello
In fact, you have more options that will avoid spending more in $$. The first thing I would try is the utility that provides HP. It is used for when the set of recovery disks does not work with a new hard drive. Follow the instructions of this web document.
View your results. If the results are negative, we can install the operating system on your new hard drive with another method.
What is the WD SATA drive model you purchased?
Erico-
-
Hard drive replacement, windows support, media does not support this computer?
Laptop HP G72 M #-C55DX, I replaced my hard drive with the same OEM, 4 recovery disks made when I bought the laptop new, replaced the hard drive, run startup test, memory and hard drive OK, insert #1 recovery disk, windows loads, then get the system recovery media does not support this computer. you are not able to restore the system with the media. I have windows 7 Premium I don't know what to do next. Thanks for the help. Frank
My recovery disks that I had at the beginning are bad. Has bought the HP boot disks. up & running, thanks Frank
-
Lodge B5S08UA: {Thae system recovery media don't dose not support this computer
After I bought it, I created the back upward on ((recovery media)) the DVD before doing anything. Now I have and I want to install it to the PC ((HP Pavilion M6-1045dx))
can someone help me?
Thae system recovery media dose not support this computer, you are not able restor this system with the media
Hi @ako89kurdish,
Thank you for posting. I read your post, and I understand that you have received the message "system recovery media does not support this computer."
One of the following errors open when you try to use recovery disks: -
SL500 "this program does not support this system.
I have an SL500 with 64-bit windows system 7. He has a new system installed. I have correctly installed all necessary drivers. Now, I'm not able to install elements of followind with the system update utility:
ThinkPad ultranav driver for windows 7
ThinkPad hotkey features integration pilot
ThinkPad Ultranav utility
If I try to manually install, I get an error message "this program does not support this system.
I had the same problem with Version 3.84.1500 of the driver Thinkpad hotkey features integration
(and the latest version of 3.84.2000)
This is a faulty installation.
2 the missing files.
Solution to what Lenovo fixes installation:
Download and install the latest version.
Download and install the 3.81.0100 version.
Copy the files SWI32.sys and SWIX64.sys of the 3.81.0100 in the folder version corresponding to the most recent version.
Run setup.exe from the most recent version.
According to the properties file SWI32.sys and SWIX64.sys are used as 'System Information Detector'.
No wonder we get the error message "this program does not support this system.
Lenovo, please fix.
-
HP ENVY PHOENIX 800-030qe: the system recovery media does not support this computer
Hello!
I can't recover to factory settings using recovery media (4 DVD) after changing HD (the previous device has crashed/broken). The message is: "the media recovey system does not support this computer. You are not able to restore this system with this media. »
So, what should I do?
Thank you very much.
Luiz Borges
Upgrade the BIOS/downgrade will not fix it unfortunately.
-
ASUS Support CD does not support this operating system WNT_6.2l_64
What the devil I've had Windows 12
ASUS Support CD does not support this operating system WNT_6.2l_64
Hi George,.
The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the link below.
General Forum(Windows Server) Technet
Good day!
Answer please if you face concerns.
-
Need help! This version of Windows does not support this version of Windows Media Technologies.
I got this error message when I tried to install Hotel Giant 2. Don't really know what to do... Pls help!
Contact Microsoft Corporation support
This version of Windows does not support this version of Windows Media Technologies. This product, which was created by Microsoft Corporation, has been blocked from running because it can prevent your computer from starting correctly in the future.
Recommendation
Hi Dot77,
Thanks for posting on the Forum of answers.
I suggest to download the patch from the site Web of Nobilis.
I hope this helps.
Chris
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think. -
What can I do to remove a box pop up indicating "Message from Web page" and the message reads "object does not support this property or method".
Hello
1 how long have you been faced with this problem?
2 have you made changes on the computer before this problem?
3. when exactly you get this error message?
The following threads may be useful:
http://answers.Microsoft.com/en-us/IE/Forum/IE8-windows_other/message-object-doesn
-
"Paint can not support this file."
This is the message I have now received a photo that I worked in the paint in many previous occasions without any problems at all. (The full message is: "paint can not support this file.) Is not a valid bitmap file, or its format is not supported. ") I can always adjust the picture (crop, rotate, etc.). I can also copy, print, and move it to another folder. But the paint does not recognize no - or any copy of it. Restarting the computer is not good. Also: Paint continues to recognize other photos from the same lot. I spent a lot of time working on this picture, and it's very painful. How can I get it back in the paint and how can I avoid this kind of thing doesn't happen this or other photos in the future?
Now I am answering my own post on the file that would not go back into the paint. (How people often sponsor their own questions?) It's still a mystery to me how the file passed in its original form (JPEG) to what paint has challenged that 'not a bitmap file valid.' But after trying all sorts of things, here's how I saved the file: first of all, I left it Windows Photo Gallery in Microsoft Office Picture Manager (which I've never used it before). I clicked on 'Export' - and at the same time changed the format JPEG bitmap - and then return the file modified images. Paint then accepted the image as a bitmap file, and as soon as he was in the paint, I used paint to return to a JPEG file. And now, it's just the way it was before all this started badly. Phew.
-
original title: error messages
As soon as I get on Explorer and on internet I get an error message "object does not support this property or method' am unable to navigate due to this message to appear on each movement. Someone help? Thank youHello
(1) do you have made no changes before this problem?
(2) is this problem limited only with a particular website or any websites?(3) when exactly, you receive an error message when you use Internet Explorer or when the Internet connection?
Method 1: If you receive script errors, you can read the following article and check if that helps.
How to fix script errors in Internet Explorer on Windows computers?
http://support.Microsoft.com/kb/308260Method 2: You can also read the following article and check if it helps.
Can't access some Web sites in Internet Explorer
http://support.Microsoft.com/kb/967897Warning: Please note that reset the settings of Internet Explorer running resets all of the settings defined by the user, including those established by the installed extensions, toolbars and other add-ons for IE by default. This includes all the security, privacy and settings area. Also this will erase browsing history, delete all temporary Internet files, cookies.
Method 3: Networking in Mode safe
Follow the link below and check if the problem persists in safe mode with network.
http://Windows.Microsoft.com/en-us/Windows-Vista/advanced-startup-options-including-safe-modeHope this information helps.
-
How to get rid of "Web Page Message" indicating the object does not support this property or method.
After I log on my computer, I get the following pop up message "Message on the Web Page" - "object does not support this property or method." He continues to pop everytime I try to do something
Hello
I suggest you to follow these steps and check if that helps:
Method 1:
Start the computer in safe mode and check if the same problem occurs:
http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-modeMethod 2:
Try to perform the clean boot and check if it helps:
http://support.Microsoft.com/kb/929135NOTE: When you are finished troubleshooting, make sure that you reset the computer in start mode normal such as suggested in step 7 of the above article.
It will be useful.
Maybe you are looking for
-
How can I change the account settings
When I open the menu and click on tools, there is no option for the account settings
-
When I start it, it seems correct, except that a pop-up appears partially on. The ToolTip is not fully displayed, and I can't find any means of l ' turn off. Also, I can't access Firefox, because everytime I try, it gives me a beep. The only way to s
-
Connecting to a wireless network
Have a friend who has a laptop computer has a LAN for internet, but as disconnected but wirless. I tried everyting from reloading to fix and nothing happened. He get a pop up screen that says wireless in the area, but in the region there are an abund
-
cannot change region on the App Store after the cancellation of the apple music membership
I can't change the country on the app store after the cancellation of subscription music apple (turn off auto-renewal), still getting the same message "To change stores, you must first cancel your membership of Apple's music"
-
no games? There is no play on my computer? Why is this? PS.mine is the Chinese... yeh so?