"Estincomplet" DataFinder Advanced Query result is equal to true after 200 files

Similar Questions

• Increase the maximum number of query results

  Hello

  I need to increase the maximum search results, when I'm looking for data with data-> ValueMaxCount

  I'd like to 2000

  I tried tho change it with the help of the property page and the example given.

  The result looks like this:

  Define DataFinder = Navigator.ConnectDataFinder (Navigator.Display.CurrDataFinder.Name)
  Set IndexedFileProperties = DataFinder.GetIndexedProperties (eSearchFile)
  Set IndexedProperty = IndexedFileProperties ("fileName")
  Define ValueList = IndexedProperty.GetValueList
  DataFinder.ValueMaxCount = 2000
  Define ValueList = IndexedProperty.GetValueList

  But the quantity of serach result remains at 200

  I am referring to the wrong object or do I need to increase it to a certain point?

  Concerning

  Janick

  Hi Janick,

  your script increases the number of values that are returned if you ask for all values that are indexed to a specific property (in the BROWSER QueryForm you will receive this list by clicking the... button to the right of the line a condition).

  To increase the maximum number of search results, you would use the MaxCount property for the elements of results.

  DataFinder.Results.MaxCount = 2000' in the search without the GUI

  or

  Navigator.Display.CurrDataFinder.ResultsList.Elements.MaxCount ' in the search with the BROWSER GUI

  What version of DIAdem do you use? 2015 tiara, it is also possible to determine the maximum number of search results in the search method:

  DataFinder.SearchElements (Query, 2000)

  I hope this helps.

  Good day

  Eva

• Query result cache

  Today I test the query result cache, but the result is not as I expected. Please give a few advices.thank you in advance.

  SQL > create table (qrc_tab)

  Number 2);

  Table created.

  SQL > insert into qrc_tab values (1);

  1 line of creation.

  SQL > insert into qrc_tab values (2);

  1 line of creation.

  SQL > insert into qrc_tab values (3);

  1 line of creation.

  SQL > insert into qrc_tab 4;

  1 line of creation.

  SQL > insert into qrc_tab values (5);

  1 line of creation.

  SQL > create or replace function slow_function (p_id in qrc_tab.id%TYPE)

  2 back qrc_tab.id%TYPE DETERMINISTIC AS

  3 BEGIN

  4 DBMS_LOCK.sleep (1);

  5 return p_id;

  6 end;

  7.

  The function is created.

  SQL > set timing on

  SQL > select slow_function (id) in the qrc_tab;

  SLOW_FUNCTION (ID)

  -----------------

  1

  2

  3

  4

  5

  Elapsed time: 00:00:05.01

  SQL > select / * + result_cache * / slow_function (id) of qrc_tab;

  SLOW_FUNCTION (ID)

  -----------------

  1

  2

  3

  4

  5

  Elapsed time: 00:00:05.00

  SQL > select / * + result_cache * / slow_function (id) of qrc_tab;

  SLOW_FUNCTION (ID)

  -----------------

  1

  2

  3

  4

  5

  Elapsed time: 00:00:05.00

  SQL > select / * + result_cache * / slow_function (id) of qrc_tab;

  SLOW_FUNCTION (ID)

  -----------------

  1

  2

  3

  4

  5

  Elapsed time: 00:00:05.00

  I wonder why time is not fast? Help, please

  create or replace function slow_function (p_id in qrc_tab.id%TYPE)

  return qrc_tab.id%TYPE result_cache DETERMINISTIC AS

  Start

  DBMS_LOCK. Sleep (1);

  return p_id;

  end;

  /

  --

  John Watson

  Oracle Certified Master s/n

• Need help to build the query/pl-sql block to get the query result and the name of column from DB table in the form of key-value pairs.

  Hi Experts,

  I have a DB table has columns of more than 50.

  I question this table, it should only return one line at any time. as sqldeveloper below image.

  

  here, I need to build block pl/sql-query, Discover the column in the table as a key and query result as values.

  Eg:     Key                         -  Value

  TASK_EVENT_ID - 1765

  EVENT_TYPE - ASR_UPDATE

  ... etc until all of the columns in my table.

  Experts please comment on that point, appreciate your help on this.

  Thank you

  -Vincent.

  Here is an approach using DBMS_SQL to iterate over the columns of key / value to assign... (Little code snipped for brevity)

  create or replace procedure (task_expired)

  v_store_id in full,

  v_task_action_id in full,

  v_job_id in full

  )

  as

  -[SNIP code...]

  v_sql VARCHAR2 (4000): = ' select * from my_table where PK = 123';  -Your SQL here!

  v_v_val VARCHAR2 (4000);

  v_n_val NUMBER;

  v_d_val DATE;

  v_ret NUMBER;

  c NUMBER;

  d NUMBER;

  col_cnt INTEGER.

  f BOOLEAN;

  rec_tab DBMS_SQL. DESC_TAB;

  col_num NUMBER;

  vAsString VARCHAR2 (4000);

  BEGIN

  -[SNIP code...]

  Message_properties. CORRELATION: = "EDF_EVENT";

  MSG: = SYS. AQ$ _JMS_BYTES_MESSAGE. Construct();

  Msg.set_string_property ('queueName', ' shipping/csi_cth');

  Msg.set_string_property ('MODE', 'CR8');

  c: = DBMS_SQL. OPEN_CURSOR;

  DBMS_SQL. PARSE (c, v_sql, DBMS_SQL. NATIVE);

  d: = DBMS_SQL. Execute (c);

  DBMS_SQL. DESCRIBE_COLUMNS (c, col_cnt, rec_tab);

  1.col_cnt J

  LOOP

  CASE rec_tab (j) .col_type

  WHEN 2 THEN

  DBMS_SQL. DEFINE_COLUMN (c, j, v_n_val);      -Number

  WHEN 12 CAN

  DBMS_SQL. DEFINE_COLUMN (c, j, v_d_val);      -Date

  ON THE OTHER

  DBMS_SQL. DEFINE_COLUMN (c, j, v_v_val, 2000);   -Else treat as varchar2

  END CASE;

  END LOOP;

  LOOP

  v_ret: = DBMS_SQL. FETCH_ROWS (c);

  WHEN OUTPUT v_ret = 0;

  1.col_cnt J

  LOOP

  -Fetch each column to the correct data type based on coltype

  CASE rec_tab (j) .col_type

  WHEN 2 THEN

  DBMS_SQL. COLUMN_VALUE (c, j, v_n_val);

  vAsString: = to_char (v_n_val);

  WHEN 12 CAN

  DBMS_SQL. COLUMN_VALUE (c, j, v_d_val);

  vAsString: = to_char (v_d_val, ' DD/MM/YYYY HH24:MI:SS');

  ON THE OTHER

  DBMS_SQL. COLUMN_VALUE (c, j, v_v_val);

  vAsString: = v_v_val;

  END CASE;

  Msg.set_string_property (rec_tab (j) .col_name, vAsString);

  END LOOP;

  END LOOP;

  DBMS_SQL. CLOSE_CURSOR (c);

  DBMS_AQ. ENQUEUE (queue_name-online 'cbus.aqjms_common',

  Enqueue_options => Enqueue_options,

  Message_properties => Message_properties,

  Payload-online msg,

  Msgid => Message_handle);

  dbms_output.put_line ('00 Msgid =' |) Message_handle);

  dbms_output.put_line('===Done=');

  -[SNIP code...]

  END;

  /

• How to get SQL Developer 4.1 to display the query result?

  SQL DEV 4.0.3.16.84 execution of a SELECT statement is stored in a .sql file causes the window of the query result of pop-up indicating the result of a SELECT statement.  SQL DEV 4.1 is not to do so.

  Oops on my part; my SQL formatting has been the root cause.  I got used to insert split without any character of comment lines in front of them.  For example:

  ==================================================

  Select funny business;

  The foregoing indicates the behavior described.

  --==================================================

  Select funny business;

  With the dash double comment shows, the SQL works very well.

  This is different than previous versions of SQL Developer, but is probably better functionality.  I'll try to mark it as answered, but anyone with the admin should certainly do so if I can't.

• Need help to understand the query result

  Hi gurus

  I was reading one of the question here in this forum and its link is below:

  Query required for scenario

  I had some confusion related to this code and don't understand the logic of the out put, see query below:

  Query

  with sub_services as

  (

  Select su_seq 12323, 'HLR1' so_id, 1 seq Union double all the

  Select su_seq 12323, "HLR2' so_id, seq 2 Union double all the

  Select su_seq 12323, "A09" so_id, seq 3 of all the double union

  Select su_seq 12333, "MO1" so_id, seq 4 Union double all the

  Select su_seq 12333, "MO2' so_id, seq 5 Union double all the

  Select su_seq 12333, "A09" so_id, 6 seq in union double all the

  Select su_seq 12333, 'M0CR' so_id, seq 7 Union double all the

  Select su_seq 12999, "LOL1' so_id, seq 8 Union double all the

  Select su_seq 12999, "LOL2' so_id, seq 9 double

  )

  Select *.

  of sub_services b

  where exists (select 1 from sub_services

  where su_seq = b.su_seq

  and so_id = 'A09.

  )

  order by 2;

  The query result

  12323 A09 3

  12333 6 A09

  12323 HLR1 1

  12323 HLR2 2

  12333 M0CR 7

  12333 4 MO1

  12333 5 MO2

  According to my understanding, the above query should return records in red only because of her is below command

  It exists (select 1 from sub_services

  where su_seq = b.su_seq

  and so_id = 'A09.

  but don't know why he's back 7 files, can someone help me understand the result...

  It is query is functionally identical to the PL/SQL block, but much more effective.

  declare

  number of l_res;

  Start

  for line (select *)

  sub_services) loop

  Start

  Select 1 from l_res

  of sub_services

  where su_seq = row.su_seq and

  so_id = "A09" and

  rownum = 1;

  exception when

  NO_DATA_FOUND then

  null;

  end;

  end loop;

  end;

  Essentially every row in the outer query are tested against him exists query.  Given the correlation between two requests is based only on su_seq each line with a su_seq value returned by him is returned in the output.

  Another way to think he uses instead a join condition.  This query is equivalent to the query to exist

  Select the main

  of main sub_services

  Join select (separate su_seq

  of sub_services

  where so_id = "A09") cond

  We main.su_seq = cond.su_seq;

  John

• Need help with a query result

  Oracle Version: 11.2.0.2.0

  I need assistance with the output of the query. Here is the table.

  With Tbl_Nm as

  (

  Select 'ABC1' SYSTEM_ID, REGION 'US', 'CHI' SUB_REGION 4000 BALANCE, to_date('1-JUN-2012 10:45:00 am', 'dd-mon-yyyy hh:mi:ss am') LAST_UPD_TIME, 'A' FLAG of union double all the

  Select 'PQR2', 'UK', 'LN', 2000, To_Date('1-JUL-2012 10:46:00 am', 'dd-mon-yyyy hh:mi:ss am'), has ' starting from dual Union All

  Select 'ABC1', 'IND","MAMA", 3500, To_Date('1-AUG-2012 11:47:00 am', 'dd-mon-yyyy hh:mi:ss am'), 'A' from dual Union All

  Select "LMN3", "US", "NJ", 2500, To_Date('1-SEP-2012 09:49:00 am', 'dd-mon-yyyy hh:mi:ss am'), 'A' from dual Union All

  Select "PQR2", "UK", "MC", 2600, To_Date('1-OCT-2012 04:45:00 am', 'dd-mon-yyyy hh:mi:ss am'), 'A' from dual Union All

  Select 'ABC1', 'US', 'NY', 3200, To_Date('1-OCT-2012 06:45:00 am', 'dd-mon-yyyy hh:mi:ss am'), has ' starting from dual Union All

  Select "LMN3", "UK", "BT", 2400, To_Date('1-NOV-2012 07:45:00 am', 'dd-mon-yyyy hh:mi:ss am'), has ' From Dual

  )

  Select * from tbl_nm

  I need the output below.

  PQR2 UK MC 2600 1 OCTOBER 2012 04:45

  ABC1 US NY 3500 October 1, 2012 06:45

  LMN3 UK BT 2500 November 1, 2012 07:45

  The need the disc according to this system_id flagged as "A". But if the last disc of 'd' then it must show that the amount, but the file should be displayed in 'A '.

  I've tried a few and got stuck. Help, please. Not able to get a balance '.

  This question is a bit similar to needing help with a query result

  With Tbl_Nm as

  (

  Select 'ABC1' System_Id, region 'US', 'CHI' Sub_Region, 4000 balance, To_Date('1-JUN-2012 10:45:00 am', 'dd-mon-yyyy hh:mi:ss am') Last_Upd_Time, 'A' flag of double Union All

  Select 'PQR2', 'UK', 'LN', 2000, To_Date('1-JUL-2012 10:46:00 am', 'dd-mon-yyyy hh:mi:ss am'), has ' starting from dual Union All

  Select 'ABC1', 'IND","MAMA", 3500, To_Date('1-AUG-2012 11:47:00 am', 'dd-mon-yyyy hh:mi:ss am'), 'A' from dual Union All

  Select "LMN3", "US", "NJ", 2500, To_Date('1-SEP-2012 09:49:00 am', 'dd-mon-yyyy hh:mi:ss am'), 'A' from dual Union All

  Select "PQR2", "UK", "MC", 2600, To_Date('1-OCT-2012 04:45:00 am', 'dd-mon-yyyy hh:mi:ss am'), 'A' from dual Union All

  Select 'ABC1', 'US', 'NY', 3200, To_Date('1-OCT-2012 06:45:00 am', 'dd-mon-yyyy hh:mi:ss am'), has ' starting from dual Union All

  Select "LMN3", "UK", "BT", 2400, To_Date('1-NOV-2012 07:45:00 am', 'dd-mon-yyyy hh:mi:ss am'), has ' From Dual

  )

  Select System_Id, region, Sub_Region, Balance, Last_Upd_Time of Tbl_Nm T1

  where t1. Last_Upd_Time = (select max (Last_Upd_Time) in the Tbl_Nm T2 where T1.) SYSTEM_ID = T2. SYSTEM_ID)

  So maybe you'd then

  ORDER BY DECODE(flag,'D',9,1) ASC...

  to get the Ds at the end of the list.

  or

  ORDER BY CASE WHAT flag = has ' (your other filters) AND then 9 or 1 end CSA,...

  HTH

• Query results pane should display the entire XML following the execution of the query

  Hi, I'm trying to get the xml output results returned in sqldeveloper returned in full.

  they are truncated to.

  I tried the trick / * xml * / but that is implemented in the form xml cdata codes and other structures of nickname.

  Select xmlserialize (DOCUMENT

  XMLELEMENT ("root",

  XMLAttributes ('http://www.millicom.com' as 'xmlns'),

  XMLAGG)

  XMLELEMENT ("line",

  XMLFOREST (U.username,

  U.user_id,

  U.PASSWORD,

  U.ACCOUNT_STATUS,

  U.LOCK_DATE,

  U.EXPIRY_DATE,

  U.DEFAULT_TABLESPACE,

  U.TEMPORARY_TABLESPACE,

  U.CREATED,

  U.PROFILE,

  U.INITIAL_RSRC_CONSUMER_GROUP,

  U.EXTERNAL_NAME,

  U.PASSWORD_VERSIONS,

  U.EDITIONS_ENABLED,

  U.AUTHENTICATION_TYPE)))

  AS CLOB DASH)

  from dba_users U

  CROSS JOIN (select 1 of the double connect by level < = 10);

  Thanks for any help you can offer.

  
  

  JM

  Hi jm,

  In the line of query results, did scroll all the way to the right, then click twice on the «...» "at the end of the line to open the cell editor?

  So again, who does not show all the XML, it may be a problem with the version of the ojdb6.jar in use (11.2.0.3 client or later is required), or whether or not the JDBC OCI/thickness is used.  Read the following discussion: retrieve XMLTYPE based on very slow saved schema

  Kind regards

  Gary

  SQL development team

• Duplicates in hierarchical query results

  Please use the suite of applications:

  CREATE TABLE EMP

  (NUMBER OF EMP_ID,

  EMP_NAME VARCHAR2 (50).

  NUMBER OF MANAGER_ID

  );

  INSERT INTO EMP VALUES(1,'SCOTT',);

  INSERT INTO EMP VALUES(2,'JOHN',1);

  INSERT INTO EMP VALUES(3,'ROB',2);

  INSERT INTO EMP VALUES(4,'MIKE',2);

  INSERT INTO EMP VALUES(5,'BOB',);

  INSERT INTO EMP VALUES(6,'JEFF',5);

  COMMIT;

  SELECT * FROM EMP, (SELECT EMP_ID FROM EMP WHERE EMP_ID IN (1.5)) TEMP

  START BY EMP. EMP_ID = TEMP. EMP_ID

  CONNECT BY PRIOR EMP. EMP_ID = EMP. MANAGER_ID;

  Basically, I first spend a few emp_ids a subquery and then want to see all records in the table emp which are direct or indirect of those emp_ids children.

  But I get a lot of duplicate records. Can someone explain what is the reason behind this? I can use SEPARATE and spend, but there could be a problem with my request in the first place.

  Help, please!

  Thank you

  RN

  Hello

  RN says:

  Please use the suite of applications:

  CREATE TABLE EMP

  (NUMBER OF EMP_ID,

  EMP_NAME VARCHAR2 (50).

  NUMBER OF MANAGER_ID

  );

  INSERT INTO EMP VALUES(1,'SCOTT',);

  INSERT INTO EMP VALUES(2,'JOHN',1);

  INSERT INTO EMP VALUES(3,'ROB',2);

  INSERT INTO EMP VALUES(4,'MIKE',2);

  INSERT INTO EMP VALUES(5,'BOB',);

  INSERT INTO EMP VALUES(6,'JEFF',5);

  COMMIT;

  SELECT * FROM EMP, (SELECT EMP_ID FROM EMP WHERE EMP_ID IN (1.5)) TEMP

  START BY EMP. EMP_ID = TEMP. EMP_ID

  CONNECT BY PRIOR EMP. EMP_ID = EMP. MANAGER_ID;

  Basically, I first spend a few emp_ids a subquery and then want to see all records in the table emp which are direct or indirect of those emp_ids children.

  But I get a lot of duplicate records. Can someone explain what is the reason behind this? I can use SEPARATE and spend, but there could be a problem with my request in the first place.

  Help, please!

  Thank you

  RN

  Thanks for posting the CREATE TABLE and INSERT statements; It is very useful.

  When you do CONNECT BY and joins in the same query (sub-), joins are made first, and then CONNECT BY is performed on all results of the joints.  In this example, you make a cross of PMCs and this join called temp.  Let's see what the result set looks like:

  SELECT *.

  WCP

  ,       (

  SELECT emp_ID

  WCP

  WHERE emp_id IN (1.5)

  ) temp

  ;

  Output:

  EMP_ID, EMP_NAME MANAGER_ID EMP_ID

  ---------- ---------- ---------- ----------

  1 SCOTT 1

  2 1 1 JOHN

  3 ROB                 2          1

  4 1 2 MIKE

  5 BOB                            1

  JEFF 6 5 1

  1 SCOTT 5

  2 1 5 JOHN

  3 ROB                 2          5

  4 2 5 MIKE

  5 BOB                            5

  6 5 5 JEFF

  Now, you do a CONNECT BY query on the result set.  As you can see, there are 2 lines with emp_id = 2 in the set of results above, which explains why there are 2 lines in your query results with emp_id = 2.  Similarly, the output defined above, there are 2 lines with emp_id = 3, and they all have two manager_id = 2, each of them is considered to be a child of each of each of the 2 rows with emp_id = 2, and therefore, you have 2 * 2 = 4 lines with emp_id = 3 in the output CONNECT BY.

  What is a cross here join?  Why must you temp?  Why not just a CONNECT BY questioning one emp, like this:

  SELECT *.

  WCP

  START WITH emp_id IN (1, 5)

  CONNECT BY PRIOR Emp_id = manager_id

  ;

  ?

• new to 4.02, no grid or column names in the query results

  It is a bit strange, I have SQL Developer 4.02 just installed, and I don't see grid or column names in the query results.  Don't see anything useful in tools > Preferences, what don't get me?

  The worksheet gives you a couple of different ways to run a query...

  1. instruction execute sheet icon toolbar (large green arrow, or Ctrl + Enter).

  This produces a results tab of the query with the data displayed in a grid.

  2. worksheet icon toolbar Execute the Script (the small tip of the green arrow on lined paper, or F5).

  This produces a tab out of the Script with the data displayed on the printer.

  If execution of the statement to Execute the Script, using some SQL * most orders will remove the column headers:

  1. set the position

  2. set the pagesize 0 (or 1 or 2).

  Pagesize and linesize default is - 1.  By default, the spreadsheet is free for formatting output script as he wishes.  If you have not changed these settings in the spreadsheet, then see if you point to a startup script in Tools > Preferences > Database > name of the connection startup script file

  Kind regards

  Gary

  SQL DeveloperTeam

• Help on the game of query results

  Hi gurus,

  Have this survey for my requirement of dataset sql.

  Sample, it's that I have to pick up the nonfunctional currency transactions.

  Lets say for a given month, data that are present are for CurrencyA and CurrencyB for a particular account.

  Account1 has a transaction does not work CurrencyA and CurrenyB then Account2 has only transaction to CurrencyB.

  My current query result is that the 3 first lines, what I need is the 4th should also appear and be included.

  CurrencyA - amount - account1

  CurrencyB - amount - account1

  CurrencyB - amount - Account2

  CurrencyA - < '0' / or null >-Account2

  I think that my request is based on the currency < x > I have, so it should be for each account, he has all the lines for each currency.

  If please notify and let me know your thoughts.

  Kind regards

  Hello

  It looks like you want an outer join partitioned.

  I hope that answers your question.
  If not, post a small example of data (CREATE TABLE and only relevant columns, INSERT statements) for all of the tables involved and the results desired from these data.
  Explain, using specific examples, how you get these results from these data.
  Always say what version of Oracle you are using (for example, 11.2.0.2.0).

  See the FAQ forum: https://forums.oracle.com/message/9362002

• Limit the number of CMIS query results

  Hello
  Can we limit the number of CMIS query results
  my query is
  SELECT * from ora: t:IDC:GlobalProfile WHERE the ora: p:xRegionDefinition AS \'ALERTRD\'
  I want only newer 2 alerts to display.
  
  Thank you

  You use the CMIS query in a workflow of presenter content in WebCenter Portal? These documents provide a maxResults parameter to set.

• Failed to 150 000 lines extracted from "xlsx" SQL query results

  Environment:
  
  SQL * Developer 3.1.07.42 on Windows XP SP3
  Oracle 11.2.0.3 EE on Solaris 10.5
  
  I ran a query in a spreadsheet window and the first page of results came back in 10 seconds, whoo hooo!
  
  I right click on the first column of the first row and selected 'Rows Count' and back 527 563 after thinking a bit.
  
  I clicked 'Export', selected a box for "Query worksheet name" "xlsx", uncontrolled size and traveled to specify the output file directory (my local C: drive) and the name of the file. I clicked on "Next" and then on "Finish".
  
  I watch the meter of the line at the bottom right of the window and it went very quickly until he hit about 150 000 lines and then it started to slow down. It got slower and slower and slower and slower, and you get the picture, and finally, I killed the process when it took more than 15 seconds from 156 to 156 250 245.
  
  Why would it be?
  
  Additional information:
  
  I have the same exact query is represented and exported the same lines 527 563 using the "xls" instead of "xlsx" format and the process has proceeded all the way to the end very quickly and successfully completed in just a few minutes. The worksheet resulting contained 8 eight worksheets since it could only put 65536 lines on each worksheet. This was acceptable to the user who just merged the data manually.
  
  There are some issues with the help of "xlsx" format of output as opposed to simply use it as input format?
  
  Is SQL * Developer trying to create a spreadsheet with the same number of rows as the data up to the max in Excel 2010 (over 527 563)?
  
  Thanks a lot for all shed light on this issue. If I omitted no details important please let me know and I'll try to include them.
  
  -gary

  Hi gary,.

  You may have seen one or more threads as follows on the question of fees increased memory overhead for the formats of Excel:
  Re: Developer Sql 3.1 - export a set of results in xls generates and empty the file

  Basically, Developer SQL uses a third-party provider API to read and write these Excel formats. There are separate readers and trainers for each of the forms xls and xlsx.

  There is a new version of the API that supports streaming of xlsx workbooks. Basically, he made a much lower footprint bearing in mind that the lines which are in a sliding window, while that older, without flow version gives access to all lines in the document. The programmer can define the size of this window. In my view, that the most recent version of the API was not available or is not stable during our cycle 3.1 development. Perhaps a future version of SQL Developer can use it.

  Kind regards
  Gary
  SQL development team

• How to clear the search query result set

  I dropped a search with the table query. When I search a value it is the display of the result, but when I click on the reset button, only the query Panel is reset to zero and not the table. What can I do to reset the table component associated with the query?

  When I click on the reset button, only the query panel goes to zero and no table.

  It will be reset nt table.

  What can I do to reset the table component

  Use of the component range reset. to do so.

  http://jobinesh.blogspot.in/2009/10/reset-content-of-Web-page.html
  http://myadfnotebook.blogspot.in/2011/05/making-reset-button-in-afquery.html trickles you want
  http://andrejusb.blogspot.in/2009/09/programmatical-reset-for-query-results.html

  -edited lately

  Published by: ADF7 on February 22, 2012 12:58 AM

• The query results: extract all lines?

  I was looking for a feature that will allow me to choose to return "all records" in the query results window. The current behavior is fetching 50 files at a time (for example fetch 50 records when you scroll the results = s-l-o-w). What I would do, that is 'Recover all lines' and then use for the scroll bar to scroll "smoothly" to the last record. For example, the 8.0.6 Query Builder version has this feature and SQL Developer 3.0, if I right click on the results. I choose 'Count lines... ". ", looks like it would be a perfect place to put an option"retrieve all rows.

  If your application is to be able to quickly reach the last record in a query you can press Ctrl + Page Down (with emphasis in the grid of results) and you will automatically position your view to the last record in the query automatically go get all the results in the process.

  You have no need to do anything with the mouse scroll is actually the fastest way to reach the desired line.