Increase the maximum number of query results

Similar Questions

• How to increase the maximum number of TCP connections simultaneously

  Hi all

  I hope some can help; I am trying to use an XP machine to machine IPERF Linux... we tested loads up to 5 (-P5) outgoing connections using XP, but now we want to move to 8... but the connection keeps flat for 3 of them. We tried the 6 and 7, again same problem, anything 5 + said "breaking" we believe that this is a problem in windows limiting the the maximum number of concurrent/simultaneous TCP connections.

  Thanks in advance

  Kind regards

  PJ

  Hi APKJ,.

  Your question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please ask your question in the following forum.

  Windows XP IT Pro category

• can it be configured to increase the maximum number of Ethernet Adapater inside the virtual machine?

  with esx 3.5 and created a virtual machine to windows 2003 RC2 standard. VM configuration wizard gives the maximum number of ethernet adapater is 4.  It may be more like ESX 4 4?

  Thank you

  Michael

  Is not possible.

  It depends by virtual hardware version and ESX 3.x support only v4.

  André

• Increase the maximum number of connections more parallel connections

  Fire Fox: HTTP max connections
  value is currently at the lowest

  Internet pages are sent via the HTTP protocol
  According to the Protocol - maximum number of parallel connections to the same server.

  Increase the number of connection max.

  How - can not find an answer - I can learn

  Thank you

  Note that it is not polite to take too many connections to the servers one and this can cause you to be banned by the administrator, so to be restrictive by increasing network.http prefs as Network.http.Max - connections-per-server.

• Is it possible to increase the maximum size of search results?

  Is it possible to increase the size of the maximum search result to above 10 000? I have about 120 000 PDF files for search and I already have them indexed with Adobe Acrobat. My problem is that only the first 10 000 search results are displayed. Does anyone know any way around it?

  Hi irfans77675326,

  Sorry, but 10,000 search results is the maximum limit in Acrobat.

  Kind regards

  Rahul

• Facing the question with the Maximum number of connections Timesten

  Hello

  In my project, I need to increase the maximum number of connections that timesten offers me. So, I changed the setting of the nucleus as shown below in the file/etc/sysctl.conf.

  kernel.SEM = 655 670720 128 1024

  The intention here is to get 500 connections max. But even after this setting too, I get only 477 connections. I don't understand why this is happening. Someone help me understand what is happening here.

  In above configuration, my hypothesis is that 155 semaphores are reserved for internal use of timesten and remaining 500 will be available for me, but this isn't the case. Please, help me in this aspect to understand why I get only 477 connections instead of 500 connections.

  Quick help is very appreciated

  Thank you

  Agnes

  Hi Agnes,.

  Thanks for the release of ttStatus. He explains what is happening and confirms my suspicions (second).

  The setting of the 'Connections' in the DSN attribute defines the limit superior on user connections; that is, connections by applications and tools such as ttIsql, ttMigrate etc etc. There is also the concept of connections 'system' (subdaemon, replication agent, agent of cache etc) that do not count against the total "Connections."

  In your case, the database is in fact properly configured for a maximum of 500 user connections. However, as you can see on the first ttStatus, you already have 23 application direct mode of 4 different connections methods of Java (which leaves the available user 477 connections). I of course have no idea what these applications are but probably your. This means that you are able to open additional connections a 477 application before arriving to the configured limit of 500. And that's exactly what we see; When you run your test application (what happens to connect via client/server), it reached 477 connections and then impossible to create more. As expected.

  Therefore, to allow connections you must:

  1. stop the database (replace ramPoilicy by manual (or inUse), stop all applications, stop the replication agent, unload from memory if the policy is manual)

  2. change the value for connections in the attributes of the DSN to a higher value (perhaps 600) - also, you need to make sure that OS semaphores are high enough to allow this number of connections.

  3. load the database back in memory, start the replication agent, starting applications.

  A a tied note, use of ramPolicy 'always' is not encouraged. In addition to the scenarios 'manual' is a better choice. We can "always" deprecated in a future release.

  Chris

• How to change the maximum number of specification for the search results

  If there are more than 500 system specifications, system would show 'maximum number of 500 records has been exceeded' when the user is trying to use '%' to find all the specifications. How can I change the maximum number showed the result of research? Thank you!

  Sorry, there is no configuration desinged to change this maximum number.

  But as a temporary workaround (it is not good for your performance), you can config MaxSearchResults property to a specific number of control ctlSpecSearch in Prodika\Code\Web\gsm\BaseForms\default.aspx, such as

  Please relate your performance if you config MaxSearchResults to be more than the default value of 500.

• IR - CubeQuery - no limit to the maximum number of columns or lines?

  In IR query processing cube, is there a limit to the maximum number of columns or lines? If so, how?
  
  When downloading of the results, are there limits to the maximum. lol the columns or lines as well?
  
  All documentation on its limits?
  
  Please help someone?

  Columns cannot be more than 256 upto Hyperion Interactive Reporting Studio 9.2.

  No, there is no limit to the maximum number of rows. It depends on the memory and available space on your machine.

  Please correct me if I'm wrong.

  I hope this helps.

  Kind regards

  Manmohan Sharma

• NiDAQmx limits the maximum number of analog samples which can be read / buffer?

  I try all the time on a USB-6363 to 1000 Hz 2 channels analog samples.  Everything works until I have started to increase the number of samples to read only once in DAQmxReadAnalogF64().

  I have set up the buffer in DAQmxCfgSampClkTiming() like twice the amount of samples, I want to read at some point.

  Up to about 8000 samples (128 000 bytes: sizeof (double) x 8000 x 2ch) it works and read call returns without delay once all about 8 seconds.  Increasing the number of samples other than that, I can no longer read the data (the DAQmxReadAnalogF64() always holler times).

  Question: am I running in a limit on the maximum number of samples that can be read or buffered... maybe a DMA limit any?  What determines how big you can make the buffer in DAQmxCfgSampClkTiming()?

  Maybe it's not obvious, according to the documentation, but if you look at the output value of the parameter samples per channel function DAQmxReadAnalogF64 reading, you'll see that when it times out, he reads what was available when it has expired. So if you're always calling this function, and your timeout value is too short, then you'll always be timeout, but you will always catch all samples. You can view this as the function will return when the buffer is full, or the timeout is reached. That's why we have provided an exit indicating the number of samples read.

  As a general rule, ask not read like this with DAQmx. I would recommend registering a callback for EveryNSamples (there is an example that's bundled with the CVI on how to do this), or by specifying a longer period than what it will take to gather real that many samples (in your case, 8000 samples at 1 kHz would be > 8 seconds). The main problem with the polling stations with a short time-out is that you should ignore errors that is not recommended.

• Sharing the maximum number of folders in windows server 2012

  Hello

  What is the maximum number of shares that can be set in windows server 2012 (or windows server R2 2012)?
  Is there a limit to the number of shares?
  This default can be changed (increased)? If so, how?

  Thank you
  Limor

  This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)
  *
  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil
  http://social.msdn.Microsoft.com/Forum

• The maximum number of users on a server terminal server

  Hello

  Can someone tell me the maximum number of TS client access licenses can be installed on a server terminal server. I use windows 2008 server r2 64 bit.

  In fact, I want to put more than 500 users on this terminal server server, I'm looking for help if as many users can access the server terminal server 2008.

  [Parts of this post deemed to be advertisements have been removed by Moderator]

  Hi Brij,

  Welcome to Microsoft Community and thank you for the query display. When you use Windows 2008 Server R2, I suggest you to post the question in this forum for help.

  http://social.technet.Microsoft.com/forums/en/winserverTS/threads

  Hope this information helps. If you have other issues with Windows, feel free to post here at Microsoft Community.

• BlackBerry Smartphones how can I increase the maximum file size allowed on the media?

  Whenever I have record video using the video camera, after a very short time it will stop recording and gives a message 'maximum size of the file reaches. I've adjusted the settings to save in 'Normal' mode, but while recording appears in last a short time, the result file size is way too big to be able to easily send to contacts. When you use the MMS mode the recording time is much too short. Is it possible to increase the maximum allowed size of the file so that a resulting video would be about 3-4 MB or less?

  You can download any software video conversion on the net. just try this one "Freestudio".

• Change the maximum number of ports on Nexus 1000v vDS online with no distribution?

  Hello

  Change the maximum number of ports on Nexus 1000v vDS online with no distribution?

  
  

  I'm sure that's what the link

  VMware KB: Increase in the maximum number of vNetwork Distributed Switch (vDS) ports in vSphere 4.x

  not to say that

  I have 5.1 ESXi and vcenter

  Thank you
  Saami

  There is no downtime when you change quantity "vmware max-ports" a port profile. It can be done during production.

  You can also create a new profile of port with a test of the virtual machine and change the "vmware max-ports' If you want warm and ferrets.

• How can I find the maximum number of recorded sessions ever?

  Hello

  I see the sessions_highwater column in the license of $ v is the maximum number of sessions since the database startup time, but I wonder if there is a view that shows the maximum number of sessions ever recorded? (that is, before the last restart of the database)

  Thank you!

  Jon

  Query dba_high_water_mark_statistics

• How do I know what the maximum number of agents I can put on a hyperic serv

  How do I know what the maximum number of agents I can put on a hyperic server. ?? IM using the built in database on a linux unbuntu 4 cpu system ' s2592 MHZ. 7GB of Ram. I assumed that the
  disk space can be the most important question? Any suggestions or any help to determine when to stop adding customers would be useful. We can use open source, but are also
  talk about the EE version. The Hyperic server type would make a difference in space etc.?

  Disk i/o is probably a bit more critical than the disk space that the DB generally is not larger than 10-15 concerts.

  Ability wise, your system is CPU/RAM.  Disk i/o will probably be your main bottleneck and the thing that will determine the maximum number of agents that can have on the server.

  Splitting of the DB from the HQ server would certainly help in the perspective of General load.  Definitely put the DB a system with several piles of discs (part of a San, fast raid) will help you in the disk i/o.

  If I was trying to answer the same question, I guess that I look at the Scriptures on disk on the DB as starting point, test the drive with systat/iostat or something to see what the drive is capable of in terms of read/write speeds and also look at postgres for slow queries, duration of execution of query, used memory and cpu.  Naturally, I would do the majority of "look at her" go to HQ itself :)

  Post edited by: ama