ESX 3.5 on an ASUS P6T system with an i7 processor

Similar Questions

• ESXi 4 on Asus P6T SE with Intel Pro/100 S - adapter not supported?

  I saw some of these threads, but none have quite answer my question. I set up an office whitebox with plans to use it for virtualization with VMWare ESXi 4. The Office currently has a motherboard Asus P6T SE and the following specifications:

  • Intel LGA1366 platform

  • Intel® X 58 / ICH10R chipset

  • Intel I-920

  • 6 GB Kingston memory

  • Intel Pro/100 S network map.

  Installation seems to be going along great, but the trainwrecks right then the detection of network card saying "not supported network adapter. I read on the HCL\HCG for VMWare ESXi4 and I found that the onboard Realtek NIC is not supported. I bought a Linksys NIC, who did not, and then as a last attempt got a card Intel Pro/100 S, thinking that this stripped NIC would pass, but unfortunately none have worked. I have of course buying an Intel Pro/1000 card, but I think that if the Pro/100 will not work, a Pro/1000 won't work either.

  I tried to change the PCI to IDE to AHCI and activation settings and disabling the NETWORK interface integrated without success. I don't know what else to try, and I rather wouldn't VMWare Server because it seems like a waste of resources to put Windows on this thing.

  I ran before ESXi on Dell servers and I an ESX cluster at work that I built on two HP DL280 G6s, but I don't want the noise of a complete server in my house.

  Anyone got past this problem yet?

  Hello

  Check carefully this message to get a network card compatible esxi 4.

  In esxi installation stage, you need a compatible network card that is present on the host computer. Is a good idea to disable all NICs not supported, then just left active management (s).

  Hope this helps

  Best wishes / Saludos.

  Pablo

  Please consider to assign all useful or correct answer. Thank you!! - Por favor considered premiar any respuesta correcta o util. ¡¡MUCHAS gracias!

  Virtually noob blog

• __Want to upgrade Vista 32-bit to 64-bit Vista on a system with 64-bit processor

  Two people told me that I can get a free update of my Vista 32-bit to a 64-bit version.  I searched and who cannot find on the website of Ms.  My system has an AMD 64-bit processor and it is wasted as far as I'm concerned.  Not sure why Dell it sent with the intall of 32 bits in the first place.  Please notify.

  If your Dell printer came prenstalled with Vista 32-bit, you are not eligible for a 64-bit version FREE disc.

  This offer is only for retail licenses, your OEM license.

  Read this: http://www.microsoft.com/windowsvista/1033/ordermedia/default.mspx

  See you soon.

  Mick Murphy - Microsoft partner

• SP3 on systems with non-Intel processors.

  No problems with installing xp sp3 on a lenovo with AMD atlone processor computer.

  Is this required hotfix

  http://www.Microsoft.com/downloads/details.aspx?FamilyId=230796A7-54D6-4C31-BDA3-EFD2F7E87A8C&displa...

  The computer works well.

  All of the suggestions.

  
  

• Cannot run Virtual ESX host configured in my Asus u56e laptop machine. Says Intel Vtx unsupported...

  Friends,

  I can't run Virtual ESX host configured in my Asus u56e laptop machine. Explains Intel Vtx unsupported.

  I checked to find that my machine has Intel VT turned on in the Bios.

  Please notify. I tried to use VMware-guest64check - 5.5.0 - 18463 tool and it said that my machine can support 64 bit OS. Fixing of newspapers.

  In my computer, open your VM ESXi and go to VM-> settings.  Under processors, check the box next to 'Virtualiser Intel VT-x/EPT or AMD-V/IVR.'

• MacBook HD has a record library and a system with a subfolder Library folder. They do not seem to be an exact replica, but if both exist?

  MacBook HD has a record library and a system with a subfolder Library folder. They do not seem to be an exact replica, but if both exist?

  Yes.

  (141504)

• Want J010dx m7: windows will not start until after full recovery of the system with new HARD drive

  Hello world

  I need help here.

  My HP envy m7 J010dx works perfectly with my original hard drive (1 TB).

  I am preparing a second HDD (NEW 320) as backup.

  I took off the Moose HDD (1 TB) and replace it with the NEW HARD drive (320GB) and try to do a full recovery of the system with the HP recovery DVD.

  After full system recovery and laptop computer needs to be restarted in order to continue, the laptop keeps restarting on the logo of windows 8.

  I think it says device not found Boot. Also a test using the UEFI tool material HP and all pass.

  Replacing the NEW HARD drive with the original of the old HARD drive and it start normally.

  What can go wrong here in this case? Thank you very much for the help.

  Concerning

  John

  OK, I read through the thread and this is my point of view on this based on works including restore process with the user created a recovery (UCRDs) media which the user indicated that they used.

  If you just want to jump to the conclusion at the bottom, you can see my opinion. If you want to know 'why' Please read the entire post.

  Model No.: m7-j010dx

  Product #: E0K83UA #ABA

  Ships OS: Windows 8 (64-bit)

  Recovery HP part No. Kit: 730336-002 (3 DVDs + extra)

  User replaced the HARD drive with a 1 TB hard drive 5400 RPM with HP ProtectSmart hard drive Protection a new hard drive is a Seagate Momentus 7200.4 ST9320423AS 320 GB 7200 RPM 16 MB Cache SATA 3.0 GB / s 2.5 "Notebook internal hard drive.

  With the help of UCRDs sent media recovery media (SSRDs):

  When the UCRDs are created, only the drivers for the HW operation (this is a critical point, that I will look later) are burned to the user created a recovery media.  Consider this a snapshot of the current HW, the base drivers and software applications.   If you change the HW on your laptop or desktop where the additional device requires a different driver for these features, a few questions you might - recovery process could stop because he can't find the right driver, a blue screen, a lack of start-up or other unstable system.

  A few years ago, I had a PC that would not recover because the Blu - ray (ODD) optical disk drive did not work.  I replaced the WEIRD Blu - ray with a generic DVD/CD burner into the new part of Blu - ray is presented.   I got the PC using SSRDs thinking I would put some time and just install the Blu - ray after the PC has been recovered.   The PC recovered and when the new Blu - ray showed I installed the unit and guess what?  All PCs have shown in Device Manager and applications was a generic ODD - no Blu - ray capability and ability to read Blu - ray content in the default HP provided for multimedia applications delivered with the PC.  Applications were there but no Blu - ray capability.

  Huh?  It looks that I did not put any time at all.

  I inserted the new Blu - ray ODD and distributed recovery with the HP SSRDs.

  After recovery, I had all the Blu - ray drivers and applications supported Blu - ray.

  The difference between UCRDs and SSRDs:

  UCRDs provide a glimpse of what is installed and functional both disks are created.

  Version Digest of the player on what is happening with SSRDs to retrieve a PC (before Windows 10):

  SSRDs have all the drivers for all the HW and SW qualified for the unit.  There may be several drivers for hard drives, different types/screen resolutions, sides, etc.  Based on the characteristics of the specific laptop / desktop a process is run called "Do / don't.   After entering the recovery SDRD, the Notebook media boots to Recovery Manager.  The first step is a raw copy of all the contents of the disc on a temporary partition.  Following the Do / do not process looks at the characteristics of this specific unit and remove all other drivers and applications not used by this device.  Drivers and the only successful applications are the features supported.   And then, the new operating system and recovery partition is created.   The PC end recovery of cleaning process and restart the laptop / desktop. And, Yes, you guessed it, if you create the user created a recovery media, you only have the drivers for HW devices and applications of HP on the PC at the time.

  So, that being said, what could be the cause/solution?

  Hard drives can be different enough so that a different driver (not the UCRDs) is necessary for the newly installed HW.

  The SSRDs are supported on the new HARD drive installed?

  I don't know, I have an office boy, and I have not tried on this model of laptop.

  If you have / acquire SSRDs, I recover the laptop with the new installed HARD drive and see if it works.  It may or may not.  I don't know what drives were qualified for this laptop.

  If this does not work, the last option is cloning via USB connection (old HARD drive in the PC, new HARD drive connected to a USB 3 via the SATA Adapter (dongle) USB port, install or download software cloning and cloning the old HDD to the new.)   I just did this on the two older Windows 7 computers laptops using a SanDisk Ultra kit.  He has worked on both units.

  Conclusion:

  I don't think that the problem is caused from a HARD drive of 1 to a 320 GB HARD drive, as it meets the minimum specs for a complete installation.  I think the problem is related to the use of UCRDs to retrieve and the UCRDs do not have the HARD driver/firmware/application disc.

  But then again, I know.

  I am an employee of HP...

• HP Pavilion 15-ab150sa: HP Notebook System BIOS update (and processors)

  Hi, I bought the HP Pavilion 15-ab150sa last weekend and have had many problems since getting it. Kept freezing and condensation WiFi shortly after logging in.

  I found there were 6 updates that need running that are not automatically showing until I scanned for them in HPSA.

  Its took me 4 days to get the updates for the most part actually fill and it seems to work a lot better now, however, I have an update for HP Notebook System NIOS update (AND processor) keeps a failure...

  Any ideas?

  Please keep it simple, I'm not very good with technical information. :-)

  Greg

  Hi Greg,.

  Try the following.

  If the update of the bios still work in HPSA, click the Stop button.

  Close HPSA, restart the computer, and then download the update of the Bios from the link below and save it in your downloads folder.

  http://ftp.HP.com/pub/SoftPaq/sp75001-75500/sp75199.exe

  Once the download is complete, close other open windows and programs, then open your download folder and double-click the installer to start the process.  The real flash will occur when you restart the machine - do not interrupt it somehow, even if nothing seems to be happening for a while - when it is finished, the machine will load in Windows as usual.

  Note:  If the update option arises as being 'blocked on this device', you will need to contact HP in this regard.

  Kind regards

  DP - K

• Looking for a helmet system with double docks rechargeable wireless

  I am looking for a very specific product and I was wondering if anyone knows a product that will do the trick.

  I want a system of wireless headphones wireless with a loading for each helmet Bay. Transmitter should accept level line of double RCA Records. I would have preferred a 900 mhz transmitter, but IR is acceptable. The system should come with two headsets, or there should be a system with transmitter/headphones with the possibility to add a loading dock and an additional heaset.

  My old system was a Sony which is at his last breath, and I found a replacement for another manufacturer with two headsets, but it lacks the loading docks - connect the heaset in the transmitter and the two heasets cannot be pursued at the time. In addition, the manufacturer says not charging headphones for more than 24 hours or you may damage the battery.

  Anyone know if Sony or someone else does what I want?

  Hi, Verne.

  Sony factory not wireless headphones double. You can perform a search on the Internet, check for any third party double helmet.

  If my post answered your question, please mark it as an "accepted Solution".

• Is it possible to build a project with Labview 2010 on a Windows XP system, which is useful for a system with windows 7 on it?

  Hello

  I intend to use Labview 2010 in no time.

  But before I go to use it I have a few questions.

  1. I know that it is possible to run Labview 2010 in an XP environment. But is it also possible, when running Labview 2010 on an XP system, to build a project for a version that is useful in a Windows 7 environment?
  2. Or should I run Labview 2010, when I want to build a project that is useful on a Windows 7 system, on a system with Windows 7?

  Please give me some information.

  I hope to hear from you soon.

  Kind regards

  Kenny

  the file (.exe) is also compatible with xp and seven, no need to change anything...

  Concerning

• HOWTO set clock system with a precision of milliseconds

  Hello! I need to set the clock system with a precision of milliseconds. Labwindows CVI SetSystemTime function use only the accuracy of a second. How to get around the problem?

  Thanks to advice!

  I spoke too soon,

  In fact, I found that the version SDK function SetSytemTime accepts milliseconds.

  However, its use is somewhat different.

  You must create a SYSTEMTIME object and set its members to the values you need.

  Then, call the SetSystemTime (of the WinSDK) function to set the clock.

  You must add "windows.h" to the top of your list of inclusion.

  (See the SDK help, there is an example of code available)

• Recover the system with recovery disks

  I have a Pavilion Elite desktop computer. I tried to reset/recover my system with the recovery disks that I created when I bought the system. But I get the following messeage: "system recovery disks do not support this computer. You cannot restore this system with these discs. "GOOD, then I thought that my disks must be bad and ordered a set of HP. I come from them and tried again to restore my system... EVEN COMING? What's wrong? Need help.

  The recovery disk problems Troubleshooter need effects?

  There is another thing that you could do that provide the Windows key is always visible on your COA sticker.  Since it was a multi-configurable system you should know it was professional, Home Premium or ultimate edition. Please be aware that what I propose will not contain the goodies HP provided with recovery disks, you will need to reinstall all your programs and data.

  Go to this site and download the version of Windows 7 ISO which matches what you had initially and have your key ready.

  http://www.heidoc.NET/Joomla/technology-science/Microsoft/14-Windows-7-direct-download-links

  Once downloaded the file ISO, you can burn on a DVD using the Windows 7 DVD drive or another DVD burner you have:

  http://download.CNET.com/Windows-7-USB-DVD-download-tool/3000-18513_4-10972600.html

  See also this site for more information:

  http://www.microsoftstore.com/store/msusa/HTML/pbPage.Help_Win7_usbdvd_dwnTool

  Once downloaded and burned to DVD, use it to try to install Windows 7 on your computer.

• Windows system error: there is an IP address conflict with another system with the network. How do I remove this error message?

  I just installed a new internet provider and all of my connections are working fine, but I constantly get this "Windows system error: there is an IP address conflict with another system with the network." I have my electrician of the internet modem connected to my office. I have also two wireless devices connected to the appearance of the Modem wireless. I constantly get this error message mentioned above, and I want to get rid of it.

  This means that all that he says.  Your Windows system has an address that already exists on your local network.  Turn your system off and use a working system to locate this address and to which unit he belongs.  In most LANs, the router's DHCP server.  You may be able to ask the router which addresses are used and see what device uses this address, but I suspect not.

  Duplicate addresses can occur when two systems received the same address manually, or when we got an address in the DHCP of the router range. It is unclear when this happened because he is not in control of the address and puts the address duplicate to a second system.  You need to track down, ensuring that all addresses manually asigned are out of the DHCP range, that you book the address of the router, if you want the device to use this address, or configure all devices to request the address of the router using DHCP.

• I installed Windows Developer Preview and I need to double to boot my system with the previous version of Windows 7 that is already installed on my computer.

  How Dual boot my windows 8

  Hello
  I have recently installed windows 8 developer preview and I need to dual boot my system with the previous version of windows 7, which is already installed on my computer.please me how to Dual boot my system with windows7.i need both versions on my computer suggest.
  Please suggest me a way to dual boot

  Ask in the forum Windows Developer Preview:
  http://social.msdn.Microsoft.com/forums/en-us/windowsdeveloperpreviewgeneral

• Cannot fix my system with KB2160329

  OS: Windows 7 Ultimate 32 bit

  Trying to patch on the system with KB2160329 (via automatic update)

  Running in 800 b unknown error code 0100. To search internet gave nothing useful for Windows 7. Started the system in Mode safe mode with disabled anti-virus. Tried to install the update. Still no joy.

  What Miss me?

  IF

  This posting is provided "AS IS" without any warranty and not an entitlement - West Iyer

  The error indicates that you can see the effects of an infection hijackware, perhaps aggravated by a rootkit infection (especially if KB981852 has not installed either).

  See the section "How to get help" of http://support.microsoft.com/kb/2160329

  For individuals, please visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy.  If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.

  Buying to meet problems installing Microsoft security updates also can visit the following page for assistance:https://consumersecuritysupport.microsoft.com/

  For more information about how to contact your local Microsoft subsidiary for security update support issues, visit the International Support Web site:http://support.microsoft.com/common/international.aspx

  For enterprise customers, support for security updates is available through your usual support contacts.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft