Cannot run Virtual ESX host configured in my Asus u56e laptop machine. Says Intel Vtx unsupported...

Similar Questions

• Mode XP error: cannot start Virtual PC Host Process...

  I installed XP Mode, download carefully the x 64 version. But when I try to start it, I get, "Cannot start Windows Virtual PC Host Process".

  Hi SibTiger,

  This happens if your PC does not support hardware virtualization based.

  How to confirm your PC can run Windows XP Mode
  http://www.Microsoft.com/Windows/Virtual-PC/support/configure-BIOS.aspx Ramesh Srinivasan, Microsoft MVP [Windows Desktop Experience]

• Virtual ESX host?

  First of all I must appologise, I tried searching, but my browser gives me a 404 error whenever I press the search.  So if a topic of this nature already exists, please let me know.

  Now to the question.

  I'm looking using Vizioncore vReplicator software, recommends that you have your disaster recovery ESX hosts in a separate group.  Ultimately, this means that your ESX hosts in this cluster will be doing nothing but waiting for a situation of DR.

  Is it not possible to install ESX and then create 2 new virtual machines:

  (1) a production ESX host

  Host 2) A DR ESX

  This way, just host would not be "wasted material" as production VM would BE able to help the production cluster workload, while DR VM would practically nothing (no pun intended hahah)... in a DR situation, the prod THAT VM would eventually not having any VMs to manage (because it would be likely that my just blown SAN) and DR site (with SAN backup) then resume the treatment.

  Any thoughts?  Can I install VMware ESX as a virtual machine in ESX?

  No you can not install ESX in the virtual machine under ESX, but you can under my computer - but ESX running in a virtual environment is not the way forward for DR performance would be catastrophic during a power outage in my humble OPINION

  If you find this or any other answer useful please consider awarding points marking the answer useful or appropriate

• cannot remove vMA ESX hosts

  I added a few guests of the vMA and activate the newspaper collection.  It collects logs for the hosts with success.  I don't want to follow these with the vMA hosts more because they are in a remote location and that it would implement a vMA at the remote location.  I use the sudo vifp removeserver servername command to remove the ESX host and they are eliminated as appropriate.  I run the vifp order mailing lists and they appear more more.  The thing is that the newspaper collection is still happening against the machines on the vMA.  I'll look in the directory/var/log/vmware and the directory for the ESX host, I deleted is still there.  I removed the directory and they immediately come with newspapers.  I'm going to rerun the command to remove the host and he says that they are already removed.

  How get rid you of the machines out of the vMA?

  You must use vilogger to disable the first control, and then remove the targets of vMA. Looks like vilogger works regardless of what VMAs think its management.

  If you have removed the targets of MAS... should not be able to connect to your targets from a distance. Are you sure that the log data is always transferred or is it simply a directory being created?

  There is a local credstore that is stored in the home directory of vi-admin /home/vi-admin/.vmware/credstore, perhaps you may need to disable it (make a backup first and move or rename)

  =========================================================================

  William Lam

  VMware vExpert 2009

  Scripts for VMware ESX/ESXi and resources at: http://engineering.ucsb.edu/~duonglt/vmware/

  repository scripts vGhetto

  VMware Code Central - Scripts/code samples for developers and administrators

  150 VMware developer

  Twitter: @lamw

  If you find this information useful, please give points to "correct" or "useful".

• Cannot run as desktop estmaintenant configured Windows dreamscene

  Windows dreamscene cannot run because the computer is currently using more than one video card

  You don't give system specs.

  http://www.google.com.au/search?hl=en&source=HP&q=Windows+DreamScene+CAN%27t+Run+because+the+Computer+is+currently+using+more+than+one+video+adapter&btnG=Google+Search&aq=f&aqi=&AQL=&OQ=&gs_rfai=

  There are hits on the link above to Google on this subject.

  See you soon.

  Mick Murphy - Microsoft partner

• Cannot run FPGA by host

  My program has normally run this afternoon, but after I saved the new file (seems no change), I can no longer see the wave in the wave chart more at the launch of the vi of the host.  Only when I keep the FPGA vi running can the wave be displayed on the chart.  I don't understand what happened.  I used Run like the invode method but I can't browse FPGA vi host more.  Any help will be much appreciated.  I've also attached the FPGA and host vi, which is barely changed from the examples.

  You have no need to run it invoke the method as your open FPGA VI reference is currently configured to automatically run the VI. I recommend you either remove the invoke method or right-click of your FPGA VI reference open and change its options so that it is not automatically run.

  The way you transfer your data between your FPGA and host VI could be the problem. Currently on your FPGA VI, you have a waveform chart and a function of bundle. As a general rule, you don't want no graphics on an FPGA VI front, since it is as just the low-level code do your FPGA-level tasks. Display you your data when you pass it to your host. In addition, there is no reason to combine a single item of data in a cluster, you can just do an indicator I16.

  In addition, I do not understand the system calendar, maybe I'm just confused here. Your front panel for loop rate default configures the FPGA VI to enter a new sample of AI every 100uS. Which means the FPGA will be claiming a break 10,000 times per second. You have your host VI set up to wait for a break before the reading of the indicator, but the host is configured to run every 10ms, or 100 times per second. Basically you have your FPGA and your host VI running at different rates orders of magnitude, but try to synchronize the bed with an interruption.

  You can run the FPGA and host screw at different rates with success using a FIFO of DMA or a queue, between them. Ensure your FPGA VI is grabbing samples very fast and packing in a queue, one both for the host VI to grab a chunk of at a slower interval. There is a great document on how to do it here: http://zone.ni.com/devzone/cda/tut/p/id/4534

• The Port of the switch to ESX host configuration

  I have a switch that connects to a physical server used in

  virtualization.  This means that virtual machines with IP addresses on

  several subnets will send layer 2 frames to this switch.

  However, in an attempt to reduce the number of network adapters on the server

  It is.   If there is only one card NETWORK in this physics

  Server connected to a physical switch port - it is possible to

  with a port on the handful of physical switch frames that come

  all virtual machines running on the physical server - when these VMs have IPs

  different subnets?  Or each separate subnet property intellectual logic requires a

  switch port separated to manage its images and its own on physical NETWORK card

  the server used for virtualization?

  Thanks for your comments

  Yes, you need to configure the physical switch port as a trunk and then configure the VLAN tagging on your Exchange Configuration-> Networking.

  If you have found this helpful at all prices please points using the correct or useful!  Thank you!

• Cannot run add a host vCAC to vCO

  I tried to run the workflow 'Add a host vCAC' and continues with invalid credentials.  I tried the account a local administrator on the system of IaaS, an AD that is in the Administrators group and the based AD account service IaaS components are installed as.  None of them have worked.

  How can I dig deeper to understand what is malfunctioning and what I need for this power?

  Someone at - he was able to do with AD to service account?

  Solution:

  Setup

  • ROOT domain credentials are named vCACp
  • Credentials of field CHILD named vCACt
  • IaaS server is in the field of CHILD
  • ROOT & CHILD have a two-way trust relationship.

  ROOT\vCACp & CHILD\vCACt to the administrator group on IaaS.Child.local

  Admission tests

  Go to https://iaas.child.com/repository/data/MetaModel.svc/ and put in

  ROOT\vCACp credential and it works very well.  It returns the XML code.

  CHILD\vCACt credential and it works very well.  It returns the XML code.

  If the permissions work on the side of IaaS.

  Go to vCO and run the "Add to vCAC host" and put in vCACp ID with the Netbios name of the ROOT.  Breaks down...

  Try again with vCACt using the netbios name of the CHILD... work properly.

  Apparently, there is a limitation/known issue with the use of vCO and cross domain trust.   Not sure of the details and am still digging for a Ko or a few other details about this.

• Cannot run virtual machines

  I get a fatal error, one of my virtual machines running. I have seen similar topics and have tried some of the answers.

  I ran scan disk, copied the VM to another drive.

  Help, please.

  Thanks Scott

  Welcome to the community,

  Please take a look at http://kb.vmware.com/kb/1227 to see if that solves your problem.

  André

• Emergency aid - Vcenter Server down - cannot access the ESX host

  Hello

  Use two ESXi hosts and a Vcentre Server (virtual)

  When I added the hosts in the center of Virtual Server, I chose the option of locking down (I forgot the actual box, I chose) but he said something like on the virtual circuit can manage hosts?

  In any case the VC went offline, do not know why and I can't access the ESXi hosts using the VI client using the root username-password. I get the followign error:

  "You are not allowed to log on the server: server name.

  Yes, you need to disable the lock mode on ESXi - go to the console and in options, select turn off lockdown mode.

  If you have found this device or any other answer useful please consider useful or correct buttons using attribute points

• Cannot run windows applications 8 on my computer toshiba satellite laptop

  Hello

  I have a Toshiba satellite laptop and I recently installed windows 8 on.
  but when I try to run windows store applications such as mail, people, message the app is shown as it loads then it is hidden.
  so I can't run any application, it disappears immideatly and does not load.
  could you help me solve this problem.
  Thank you!

  Hi Benjamin,

  For the question links to applications, please try the following steps.

  Method 1:

  You can see the steps from the following link.

  What to do if you have problems with a soft

  Method 2:

  Please check if a proxy is enabled, if necessary, turn it off. Follow the steps below:

  (a) select the Internet Explorer tile on the start screen.

  (b) turn left click on the settings icon in the lower right.

  (c) select Show the desktop. You will be guided to desktop Internet Explorer.

  (d) select settings (speed) icon in the upper right.

  (e) select Internet Options in the menu drop-down.

  (f) go to the connection tab on LAN settings from the lower right of this window.

  (g) uncheck the box that says "use a proxy server for your LAN settings.

  Please post with the State of the question.

• ESX host keep disconnecting

  I installed Workstation 7 on my laptop and then I installed ESX4 and I installed Win 2008 Server DC and XP as a client, it is a small network within the workstation 7, I installed vcenter on xp. I added host esx to vcenter, but very often disconnected ESX I got an error to the vSphere client "host not responding not not in red. the resolution of all the names are very well each other, each machine can ping IP as hostname.  no firewall, by default, all ports are

  Windows server 2008 domain controller. 10.0.1.2 255.0.0.0 10.0.1.1 10.0.1.2 DNS gateway (no firewall)

  XP client (vCenter server last updated one) 10.0.1.3 255.0.0.0 Gateway DNS 10.0.1.2 10.0.1.1 (no firewall)

  ESX1 vSphere host. 10.0.1.244 255.0.0.0 Gateway DNS 10.0.1.2 10.0.1.1

  ESX2 host vSphere. 10.0.1.241 255.0.0.0 Gateway DNS 10.0.1.2 10.0.1.1

  Also I can not activate service status and material vcenter vCenter

  All ESX hosts are in default, that I don't have any care add in all plug-ins are by default taken into

  I am running vSphere client on win 7, which is my laptop machine and host for workstation 7

  Please see attached screenshot of vcenter client and these two ESX host event log

  No idea

  Thank you

  It is either a problem with the network configuration or there is a firewall blocking some ports.

  Anyway, please open a thread for a new question. Also, if please mark it as answered (if that is the case) and select correct or helpful answers.

  This will help other users with problems similar to benfit from the community.

  André

• Can we use use DELL R610 / R710 for execution of the ESX host?

  We will purchase a new server to run ESX 3.5 or vSphere.  We have new DELL servers.

  We considered R610 and R710, but we see that there are only 2 PCIe slots.  As one of them be given for an image ADDITIONAL NIC card, there is only one location for HBA.   It is advisable to use a Dual Channel QLogic QLE2462 HBA.

  However, it seems that the Dual Channel HBA will be a single point of failure - if it is connected to 2 different switches FC.  We would love to hear if anyone uses these DELL servers to run the ESX host.

  Thank you

  Good question, I would have preferred two HBA cards. If storage fails everything disappeared. If network failure you will not have access to the outside, but the chances of data corruption is smaller.

  Duncan

  VMware communities user moderator | VCP | VCDX

  -

• Advice on how best to configure the network adapters and virtual switch in ESX host

  I'm new to VMware and am its implementation.  I got my training a few weeks ago, and now I'm configing my hosts.  I have 3 guests, each have 2 network cards.  There is a virtual switch that ESX creates when it is installed (vSwtich0).  The books said that it is advisable to delete the VM network port of virtual machine that is assigned to the value group default virtual switch and put it on another virtual switch so that you keep your management network separated from the network of the vm for performance and security.  If I do this, all my virtual machines will have to go to 1 NIC b/c I only have 2 NICs per host.  I thought that I have just to keep all my groups of ports on the default vSwitch0 and add my second NETWORK adapter so that I can take advantage of the Association of NICs for redundancy and load balancing.  However, I'm not sure on the performance and the security risks.  Do you have any ideas or advice?  I could also create two virtual switches and put my virtual machines on one which would have a NETWORK card dedicated and put my service and Kernal VM console on another virtual switch with a dedicated network card.  However, in this scenario, I have no fault tolerance or load balancing.  We are a small shop and we have about 10-15 VMs on each host.  I don't have access to b/c distributed switching we paid only for the company (not more).  Thank you.

  Hi and welcome to the forums,

  With 10-15 VMs per box and I guess that I would seriously consider adding two extra cards for each host in the production machines. You could then do something like:

  vSwitch0 - vmnic0, vmnic2, vmnic3 - Console of Service, VM LAN network

  vSwitch1 - vmnic1 - VMkernel

  That would give you redundancy and performance to access your hosts (SC) and also for all your virtual machines. The VMkernel would get a NETWORK card dedicated for vMotion and could be on a separate network. He didn't need redundancy really as if the NIC sank the only issue is that you cannot vmotion virtual machines. In this case you would just move one of the NIC workgroup through to those switches manually.

  If you only have 2 network cards, then I would say having a vSwitch with two attached network adapters and VLAN the VMkernel may be off. I want absolutely to the redundancy of having two cards together.

  Hope this helps,

  Dan

• Cannot connect esx host or vcenter server via powercli (cannot run the cmdlet Connect-VIServer)

  Dear team,

  Once I opened powercli windows, I m unablwe to connect the ESX host or vcenter server, it gives me the following error... Help, please

  

  concerning

  Mr. VMware

  Hello, MrVmware9423-

  It seems that this may have to do with the .NET Framework is installed on the computer on which you run PowerShell/PowerCLI.  Take a look at http://communities.vmware.com/message/2174319 - users have been able to solve the problem with a newer version of the .NET Framework (v2, installed v3.5 - success).

  Because your problem seem (you use a? 2 version of .NET, and you're able to install a newer version)?