ESX 4.1 in a box and race of VM

Similar Questions

• Cannot connect ESX to HP MSA 1000 box

  I have 2 ESX servers. These two servers are connected to a HP MSA 1000 (that's our mini san)

  On the connection to one of the vi console box, I see the server and 3 comments below.

  On the creating a new virtual machine, I can connect to a data store. There is no connectivity between this box and the table.

  On the connection to the 2nd ESX Server via the VI Client, all guests show as unavailable.

  I can't restart or do something with these clients.

  In addition, trying to add a new virtual machine, I see nothing in the screen of data store. (then becomes invalid)

  Is this a problem with conectivity between the ESX Server (in which comments are unavailable) and the HP table?

  Can what commands I use to tets connectivity to an ESX Server data store and check if data warehouses are available?

  Hello

  So, I assumed that the aircraft was down and had to be reset. The guys at HP have not upgraded the firmware of the device as they wanted to ensure that there are no compatibility issues with the firmware of the MSA 1000 box cards HBA and firmware.

  Interesting, that I never got to restart my unit to get connectivity. I would upgrade to firmware active/active.

  A strange thing is that this MSA 1000 has 2 controllers, but one of the controller was never connected to the box. Not bad, it is inserted into the MSA1000. It seems therefore, that there is no (active-passive, active) configuration of the array of redundancy. It's something I want to do moving forward.

  Just insert it. Make sure however that the main port HBAS on each host is connected to the primary controller within the MSA. If they are not get you flip flop unless you use Active/Active firmware.

  At this point you can connect via the Web, VI and the ILO in two boxes of ESX Server and Yes we had also a connected Windows box (it was never passed on to me), so now in the windows box, I started the utility of matrices of Compaq and I can see the raid configurations.

  This is how to configure the MSA. You can do not to ESX or the ILO, only a box separated from Windows with qlogic HBA or cable series. That in general, I have connected to my ESX host so I could control things without needing a separate windows box.

  Oh boy! IF anyone of you can guide me to a good guide for the configuration and connections between MSA1000 SAN and ESX hosts, it would be wonderful.

  HP should have one.

  Another question: I noticed that the version of ESX is 3.0 and VI client is 2.0. Also when I connect through the VI client, I see that the tab of the inventory and the administration, I don't see the options such as cluster options and also activate the plug-ins for VMotion and VMupdate Manager. When I connect through the VI client, I login as root.

  Should I be upgrading the infrastructure of the ESX 3.5 and the VI Client to 2.5 to activate all options?

  These options are available in 3.0 and 3.5. Not really sure what you're asking here. But I think it's a separate issue and should have its own thread.

  Best regards
  Edward L. Haletky
  VMware communities user moderator, VMware vExpert 2009
  ====
  Author of the book ' VMWare ESX Server in the enterprise: planning and securing virtualization servers, Copyright 2008 Pearson Education.
  Blue gears and SearchVMware Pro items - top of page links of security virtualization - Security Virtualization Round Table Podcast

• the pages for iOS - how to resize a text box and forms manually

  I added text boxes to my sheet. However, I can't get close to the size I want, which is not noticeable to someone else, but I wish they were accurate.

  example: I want to 1inchx4inch. but now the box and adjusting the size I can get 1.02x3.98. 99x4.01, etc.

  I know it still looks the same as the sizes are extremely close, but if there was a way t adjust by entering the desired size that I would rather do.

  Thank you

  Hi aswad,.

  If it is a file that you edit on your Mac you can certainly do here in the Inspector.

  If you are only in iOS with this you can try zooming in - you can have more control over it.

  Quinn

• How to install windows 8.1 iMac (27 inch, mid 2011) without DVD drive and race El Capitan

  Hello! How to install windows 8.1 iMac (27 inch, mid 2011) without DVD drive and race El Capitan?

  I read everything I could on the subject and could not get the Boot Camp Assistant to create the USB key. Can you help me?

  Boot Camp Version 6.0.1

  If you run the wizard of BC, are you give the possibility to create an installer from USB? Did you change Bootcamp Info.plist file?

• Given to replace my current iphone with a 6s - a trip that I can disable the use of boxes and use a unique sim card data for emails

  Given to replace my iphone today with a 6s - a trip that I can disable the use of boxes and use a sim card only data for email & web.

  If you go to settings > Mobile and less ' use of mobile data for: "turn off all except Safari and Mail

• Start FireFox, download flash of white boxes and then sceen becomes black. Said above "Search - Mozilla Firefox" no just all black of the taskbar.

  Trying to help a friend. Their return from holiday. When she tried to start FireFox, the only thing it shows is a black screen. I updated the version and tried. Same result. FireFox ininstalled 'workstation. Downloaded FireFox and installed. Once again, same result. FireFox starts, but after a very second cherry where it show 2 empty boxes and then the screen goes black. The only thing is the search - Mozilla Firefox at the top left. There is nothing else to see or open.

  Try to start Firefox in Mode safe mode by holding down the SHIFT key by double-clicking on the icon.

  If it helps, try disabling graphics hardware acceleration where there is an incompatibility of the graphics driver.

  You need to restart Firefox for it to take effect, so save any work first (e.g. you compose mail, documents online that you are editing, etc.).

  the button Firefox orange (or the Tools menu) > Options > advanced

  In the mini ' General' tab, uncheck the box for "use hardware acceleration when available.

  If you restart Firefox, is the problem solved (or at least enhanced)?

• I can't do the long search box and the shorter address box.

  As above. Even with the 'customize' window so that the icons can be moved or deleted.
  I tried to put the search boxes and address next to each other, but scaling is not yet an option.
  I use Firefox on a MacBook Air running Mountain Lion.

  You must do the resizing in normal mode and not when the Customize window is open.

  While in normal mode (and not in customization mode), you can place the mouse pointer between the address bar and the search bar, and it will become an icon of resizing that you can slide right or left with the left button of the mouse to change the relative width of the two bars.

  • https://support.Mozilla.org/KB/search+bar

• I can't bid on firefox or explorer. I place the cursor in the quote box, and it will not record the numbers. Can someone please help?

  I can't bid on firefox or explorer. I place the cursor in the quote box, and it will not only record the numbers. Can anyone help please thanks

  Problem solved. My husband came and noticed that the number lock has been deactivated. I can't thank you enough for your help. Hope my solution helps someone else with the same problem.

• the imei/meid number on my box and the Bill is different from what it shows in the icloud settings. Should what code I provide legal officials? I lost my phone

  the imei/meid number on my box and the Bill is different from what it shows in the icloud settings. Should what code I provide legal officials? I lost my phone

  Did you buy it an Apple Store, another store or regular carrier or as a boon to someone else?

• Delivery to the address P. O Box and APO/AP

  I built a Photo calendar and I want to send one to a P. o. Box and the other to an APO/AP address.  When I try to enter addresses, I get the error messages.

  No PO box

  to see APO - http://www.apple.com/shop/open/shipping_apo

  LN

• I have a mini ipad 2 and I fight a smart box and it is not turning off the ipad.

  I have a mini ipad 2 and I fight a smart box and it is not turning off the ipad.

  Go to settings > general, and then turn on lock/unlock.

• Hello! I bought 6 iphones from Saudi Arabia and I put t know if all have Facetime! All iphones are new in boxes and I don t want to open! How will I know if all have Facetime? Thank you

  Hello! I bought 6 iphones from Saudi Arabia and I put t know if all have Facetime! All iphones are new in boxes and I don t want to open! How will I know if all have Facetime? Thank you

  If the phones were purchased from an authorized Apple source and were intended for sale in Saudi Arabia, none of them was FaceTime.

• What do the boxes and the son of color

  I remember years back find a Web of National Instruments page which showed that all of the Labview of color 'son' and 'boxes' and what they meant.  Nobody knows where it is now or if it still exsists?  For example, a box of "magenta" was a... a green String Boolean...

  Thank you.

  It was the quick LabVIEW reference card. At one point, they stopped putting the data on the map types. Don't know what version stopped. You can get online maps: http://search.ni.com/nisearch/app/main/p/bot/no/ap/global/lang/en/pg/1/q/labview%20quick%20reference...

• How to select a cell in a multicolumn list box and use the horizontal scrollbar on th

  An event structure, how to select a cell in a multicolumn list box and use the horizontal scrollbar on the front panel at the same time.  I can select a cell in the multicolumn in a structure of the event, but I can't move the scroll bar on the front panel when the program is running.

  I guess that you are referring to the scroll bar in the control multi-column listbox. What does your code when you select a cell? Can you please your postal code so that we can see the behavior you describe? It is possible that you are blocked the structure of the event, as in performing an operation long in case the treatment cell selection. In this case, the structure of the event must wait until the event ends before being able to respond to the next event. You can configure the event to not lock the front panel until the event ends.

• age of empires 3 product lost key.is there a way I can get the key.i have the box and cert of authenticity and all code cd

  age of empires 3 product lost key.is there a way I can get the key.i have the box and cert of authenticity and all code cd

  Hi barryholt,

  You can see the following article for more information on the same.

  How to get a new product key for Microsoft Games for Windows, Streets & Trips, or MapPoint