ESXi 4 LSI and SAS3042EL compatibility

Similar Questions

• VM Compatibility ESXi 5.1 and later bad (VM version 9) with the network

  I'm having and ESXi host with 10 VM, all connected to the same portgroup on the virtual switch. To allow THT, I created the last slots with 5.1 ESXi compatibility and later (VM version 9), where all the other machines have ESXi 4.x and later (VM 7).

  Now, I'm having the issue 2 machines with version 9 can talk to each other, and version 7 cannot talk to each other. It is not possible to make a ping to a version 7 virtual machine vm version 9 and vice versa.

  
  

  An idea, a re there known issues, something I did wrong? From what I saw that day was to be a major change in the networking between these versions.

  Any help welcomed verrrrrry!

  Thank you, Philippe

  
  

  
  

  OK, after spending a day debugging, convert machines front and rear, delete and remove the NETWORK card I was able to convince the administrator to restart the host ESX - problem solved!

• Nexus 1000v - Question about VSM and VEM compatibility update

  I am unable to find Cisco documentation on the backward compatibility of the MEC when you perform an upgrade of the VSM. I'm looking to improve the VSM of 4.2 (1) SV2(2.1a) to 5.2 (1) SV3 (1.15).

  Hosts must be upgraded simultaneously, or they will continue to work with the current MEC? I prefer to leave guests as is and upgrade the MEC as a bundle with the host ESXi 6.0 upgrade to eliminate having two separate windows of failure for the guests.

  ESXi hosts all running 5.5 with VEM cisco-vem-v162-esx (4.2.1.2.2.1a.0 - 3.2.1).

  Thanks for the help in advance!

  Greetings.

  Click on the link below, you can enter your version of esxi, N1k version and versions of destination and will get a high level not list.

  http://www.Cisco.com/c/dam/en/us/TD/docs/website/Datacenter/nexus1000/upgrade/n1kvmatrix.html

  You can go directly from the SV2(2.1a) to SV3 (1.15)

  VSM upgrade notes: http://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus1000/sw/5_2_1_s_v_3_1_15/install_upgrade/guide/b_Cisco_N1KV_VMware_Install_and_Upgrade_Guide_521SV3115/b_Cisco_N1KV_VMware_Install_and_Upgrade_Guide_521SV3115_chapter_010.html

  Please make sure that you check the required CPU, vram, virtual disk space requirements BEFORE, you upgrade the VSM, as demands increase for SV3 versions.

  After that the VSM is updated, your MEC will continue to operate at the older level, until you get updated MEC to level.  You usually don't want to change the major config will be running in this mixed level.

  After the upgrade of the MEC, remember to update the level of functionality of vem, or features that now get discharged to the VSM VEM (netflow, igmp snooping, lacp, etc.) will be continued to be run on the VSM.

  Take a look at http://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus1000/sw/5_2_1_s_v_3_1_15/install_upgrade/guide/b_Cisco_N1KV_VMware_Install_and_Upgrade_Guide_521SV3115/b_Cisco_N1KV_VMware_Install_and_Upgrade_Guide_521SV3115_chapter_0100.html

  as it has some notes on the integration of the module vib VEM update esxi 6.0 install/upgrade ISO.

  Thank you

  Kirk...

• ESXi 5.5 and RAID

  Good afternoon

  I recently bought a Cooler Master case and build a virtual server. The specifications are:

  CPU: Intel Core i7 3770 K @ 3.50 GHz

  Motherboard: ASUSTeK COMPUTER Inc. P8Z77-V (LGA1155)

  Hard drives: 3 to 2

  I chose to install the latest version of ESXi (5.5). The first question I had was the NIC not recognized. I could correct this problem by injecting an e1000 driver into the ISO using ESXi-Customizer.

  The next issue, that I met him, it's the software RAID I built out of my Asus motherboard is not recognized by the installer of ESXi. In the BIOS, I have:

  Version of the BIOS 2104

  Intel virtualization technology - enabled

  SATA - RAID mode

  3.6 TB RAID5 (condition: in good HEALTH)

  I spoke with Asus this morning and told me that everything was going well at their end. However, they said that they do not specifically support VMware products. He suggested that finding an Async driver to add to ISO. I can not find it and have found conflicting reports of whether or not this configuration is still supported.

  In short, my P8Z77-V RAID array can be seen by ESXi 5.5 and if so, how?

  Thank you

  Eric

  Software RAID controllers are not supported with ESXi.  If you plan on computer using a RAID system on board, you will need to install a hardware RAID controller.  Trademarks of Adaptec or LSI would be a good starting point.

• LabVIEW and TestStand compatibility chart

  Hello

  There are various compatibility tables LabVIEW NOR as this Web site but it seems not to be a LabVIEW and TestStand compatibility chart.

  I think I found my answers, but I had to get through all the Notes version of TestStand to get.

  Hi Ray,

  The lists of the political of TestStand page on the different version of TestStand compatibility with:

  • Operating systems
  • LabVIEW
  • LabWindows/CVI

  (In addition to information about the cycle of life and support policy)

  Specifically, here's a screenshot of LabVIEW support:

  

  With each new version of TestStand, we will update the policy life cycle page, so you can always go for information.

• Microsoft enhanced Point and print compatibility driver printer driver is not installed on this computer

  We are running Windows 7 Enterprise 64-bit (using VMware View 6.1) virtual work stations and the connection of users to a printer Xerox 4 Type driver/file being hosted on a Windows R2 server in 2012. The driver on the server is listed as "Xerox WorkCentre 7970 V4 PCL6" and when the user of Windows 7 connects the driver appears as "Microsoft enhanced driver compatibility point and print. In the "Print Management" client Win7, it appears as the 6.3.9600.17415 version

  The Printer works fine during their Windows session, they disconnect you and when they connect in the print queue is still there but when you right click and go to "Printer properties", he throws the following error

  "The printer driver ' improved point and print compatibility Microsoft driver" is not installed on this computer. " Some printer properties will be unavailable, unless you install the printer driver. You want to install the driver now? »

  Deleting the queue and then add it again resolves the problem for Windows session, you're.

  Note: we use Persona management of VMware to save data from the user profile of the disconnections from the virtual offices are non-persistent. I've been able to reproduce this in Windows 7 using a virtual office, I can't reproduce it on my physical Windows 7 machine.

  We get around this by using Group Policy and a vbs script to delete the queue on logoff, then another script to add back on logon, but it's just a band-aid.

  In addition, a Type 3 driver works fine in all of disconnections but we need the Type 4 driver in this case.

  Hello Brian,.

  Thank you for visiting Microsoft Community and we provide a detailed description of the issue.

  I suggest you to send your request in the TechNet forums to get the problem resolved.

  Please visit the link below to send your query in the TechNet forums:

  https://social.technet.Microsoft.com/forums/en-us/home?category=WindowsServer

  Hope this information is useful. Please come back to write to us if you need more help, we will be happy to help you.

• ESXi on T610 and OpenManage Server Administrator on windows

  Dears

  I have Power edge T610 hosted ESXi 4.1 and I need gale HW on network via OpenManage Server Administrator is installed on the Windows machine, I need to know that it is OK or not:

  If it works: what the user name and password to log on give

  otherwise: how I can eat the server HW

  Moharafa,

  I sent you an email with a detailed itinerary, which you can use to install Open manage with ESXi.

  I would like to know if that's what you're looking for.

• How to upgrade the esxi 5.0 and 5.5 only give me the step in process setp.

  How to upgrade the esxi 5.0 and 5.5 only give me the step by step process.

  There are several methods supported for direct upgrade to 5.5 ESXi are:

  • vSphere Update Manager.
  • Interactive update of the CD, DVD or USB drive.
  • Scripted upgrade
  • esxcli
  • Automatic deployment

  You can find each method in this KB: http://kb.vmware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalId=2058352

  Also a good interactive video updated via CD/DVD/USB. Upgrade to VMware ESXi 5.5 using Setup Interactive - YouTube

• popular error; An error occurred when opening a virtual disk. Make sure that the converter server and source running machines have network access to the ESX/ESXi hosts source and destination.

  Once again; same problem, others have encountered but nothing seems to work.

  An error occurred when opening a virtual disk. Make sure that the converter server and source running machines have network access to the ESX/ESXi hosts source and destination.

  We have 1 physical servers, we need to see. Here is the environment. All 3 separated location, 3 all firewall separated

  1 physical servers

  -Internal IP address; 172.16.160.21
  -FARM Firewall

  vCenter Server

  -Internal IP address; 172.16.1.85

  -Local Office (ALX)

  Location of destination (ESXi host):

  -Internal IP address; 172.16.153.20

  -Firewall ROOMMATE

  
  Already completed:

  VMware KB: disable SSL on VMware Converter Standalone 5.x encryption   SSL disabled in converter-worker

  Firewall are open / Tunnel is open throughout the environment.

  I have attached the logs.

  Thank you very much

  POCEH; Thanks for the reply. But I wouldn't be pulling my gray hair if I knew what the problem was. I understand that there not for the peer but why...?

• Converter does not have "an error occurred when opening a virtual disk. Verify that the Converter server and source running machines have network access to the ESX/ESXi hosts source and destination. »

  Hi all

  I'm having some trouble converting server physical windows using autonomous vConverter 5.5.

  error message:

  "An error occurred when opening a virtual disk. Verify that the Converter server and source running machines have network access to the ESX/ESXi hosts source and destination. "

  I have attached the bundle newspapers. Please notify.

  See you soon...

  Your error is:

  2014-11 - 04T 18: 27:27.587 - 08:00 [01236 info "Default"] GetManagedDiskName: Get disklib file name as vpxa-nfcssl: / / [a0110-vmgt70-001] WIN-MOVRCVCSITG/WIN-MOVRCVCSITG.vmdk@a0110tesxhyp01.datacenter.telenorservices.com: 902! 2 b 52 87 75 03 03 ff 49-67 2f 3 a 61 76 and 00 cd e1

  2014-11 - 04T 18: 27:27.587 - 08:00 [01236 WARNING 'Default'] [, 0] NfcNewAuthdConnectionEx [NFC ERROR]: unable to connect to peer. Error: Failed to search for host for a0110tesxhyp01.datacenter.telenorservices.com server address: the requested name is valid, but no data of the requested type was found

  2014-11 - 04T 18: 27:27.587 - 08:00 [01236 info "Default"] Sysimgbase_DiskLib_OpenWithPassPhrase failed with 'NBD_ERR_NETWORK_CONNECT' (error code: 2338)

  Check the manual on the required ports.

  HTH

• Vshphere Client 5.1 can't connect with esxi 5.0 and earlier

  Hello

  I am facing a strange behavior I me client Vsphere updated 5.1 but now it is impossible to connect with esxi 5.0 and older versions. When I try to connect to an earlier version of esxi it show me update popup but unfortunately on this machine I can't connect to the Internet ihave manually download a patch?

  Talha Correia

  Hello

  You must download and install the client on your computer.

  You can find in the download section of the website of VMware vSphere.

  It comes to 5.0

  https://my.VMware.com/Web/VMware/info/slug/datacenter_cloud_infrastructure/vmware_vsphere/5_0

  Francesco

• ESXi 5.1 and VMFS-3 data warehouses

  We have an existing environment to ESX 3.5 Update 5 7 host and an EMC CX3-10 x iSCSI SAN. We go to decomission 2 ESX hosts and replace them with hardware ESXi 5.1 and recent guests. We realize that we no longer able to manage these hosts ESXi from our Virtual Center 2.5 console, but these two hosts will run a minimum number of virtual machines (Exchange 2010 multirole) that don't use VMotion, DRS and HA.

  Our understanding is that ESX5.1 can see and use VMFS-3 data warehouses. Is it true that, once we plugged the new 5.1 ESXi hosts to our SAN and you can see all the existing LUN that we should be able to stop the virtual machines on two ESX 3.5 hosts and start the virtual machines on the host ESX 5.1 computers?

  Everyone has problems running ESXi 5.1 with VMFS-3 data warehouses?

  Some data warehouses VMFS-3 existing could be improved to VMFS-5 because they are only used by the virtual machines that work on 5.1 ESXi hosts. But some of the data warehouses VMFS-3 existing is not extensible because they are used by the virtual machines running on ESX 3.5 other hosts. In other words, a single virtual machine can have virtual drives running on the VMFS-3 and VMFS-5 warehouses of data at the same time?

  Thank you

  Jay

  VMFS version isn't a problem. What I am more concerned by the fact that your storage system is not supported by ESXi 5.1.

  André

• Is it possible to mix ESXI 4.1 and 4.1 U2 in a cluster DRS/HA

  Is it possible to mix ESXI 4.1 and 4.1 U2 in a cluster DRS/HA, with Vcenter 4.1

  I've seen http://communities.vmware.com/thread/327392 and ttp://partnerweb.vmware.com/comp_guide/sim/interop_matrix.php wire

  The attachment shows the results of the matrix, which suggests that you can.

  Yes it is and it is supported, the main problems is the type of CPU Family a reason to separate clusters not vSphere editions

• install esxi 4.1 and the data store on the same server

  Hello

  I want to install esxi 4.1 and the data store on the same server.

  My problem is that I can't make partitions to really separate them and I would reinstall esxi without wiping the data store.

  Y at - it another way to put a record out of the raid only to install esxi.

  I also do not install on a USB key.

  Thank you

  AZEL says:

  Hello

  I want to install esxi 4.1 and the data store on the same server.

  My problem is that I can't make partitions to really separate them and I would reinstall esxi without wiping the data store.

  Y at - it another way to put a record out of the raid only to install esxi.

  I also do not install on a USB key.

  Thank you

  AZEL,

  Can you give us more details about your current environment?  What is the size and the data store space used? Do you have any storage of additional network attached to the host (for backup purposes)?

  My assumptions of your post do you have 1 stand-alone host with ESXi 4.1 aready installed and you also have a local data store on the same host, but you want to re - install ESXi 4.1 while keeping the contents fo the data store.  Is this correct?

• The VM OS installs (ESXi 3.5 and 4.1)

  I tried to create a working VM on ESXi 3.5 and 4.1 on a Dell 2850 for the last 2 days without a bit of luck.

  No matter what I do, the result is either 'operating system not found' (when you use the computer settings default virtual for CD/DVD) or the console window just sits there indefinitely with flashing underscore in the top left corner of the screen when I try to map VM CD/DVD to: welcome CD, ISO image of data storage local client CD or ISO local client image.

  I tried with Win2k3 and WinXP OS and have the same results with both.

  I made sure that the config of the BIOS was configured to boot from the CD as the 2nd option in all cases.

  I have no idea what else to try?

  I second everything people have said notably that the disc probably isn't bootable download / bad / bad ISO file.  A simple test is to simply start on a physical computer drive and see if it loads in the configuration of the installation.  You can always cancel without affecting the current installed OS after checking that it works.  Make sure that the CD/DVD is set to connect market, etc... I'm sure you already know.  These disk sizes should be around 400-600 MB in size.

  -Kyle

  «"RParker wrote: I guess I was mistaken, everything CAN be virtualized"»