ESXi 5.1 configured as a NTP server, do not sync with the Local PC

Similar Questions

• NLB - the RPC server is not available on the specified computer. To connect to the < Server >

  Have a Windows 2008 R2 SP1 NLB service two nodes on VMWare. Bothe nodes have two network cards. Internal one dedicated to NETWORK load balancing and the other for the network.

  Management console of NLB on a single poster NLB node is in good health. The two nodes are visible and OK.

  Management of NLB on the other node shows only its own node - while the other node is missing. An error when updating...
  "The RPC server is not available on the specified computer. "otherNode.com" connection error"

  I disabled the back loop check - it makes no difference.

  Any help please?

  I think I solved the problem...

  As I wrote previously, I disabled the back loop check in the registry on both nodes, create a new DWORD (32 bit) key...
  HKLM\SYSTEM\CurrentControlSet\Control\Lsa\DisableLoopbackCheck - with a value of 1

  Then, I made sure that the link speed & Duplex on all network interfaces are set to a specific value (no Autonegotiation), for example. 1000 Mbps Full Duplex (in my case).
  Ideally only the NIC - on each node - connected to the NETWORK load balancing must be configured with hard values.

  This solved the RPC error in my environment of NLB.

  Hope this helps those who have the same symptoms.

  Samuel.

• Thunderbird does not connect with the server

  Another recent problem is Thunderbird does not connect with the server. I don't know if sent mail will go out, but I know I'm nothing receive. My internet connection works well for FF or another browser. I checked my settings and they seem OK. I checked the default settings in Win10x64 and they are correct. Any ideas?

  Although windows 10 is new for us all. How do solve you. I have other solution with very similar issues.

• Does not connect with the e-mail server after update.

  Thunderbird ran an auto update yesterday. Then it just stopped working. It does not connect with the Comcast email server. An error message appears "Unable to connect" and "the connection was refused when attempting to contact live.mozilla.messaging.com. I don't want to uninstall and reinstall for fear of losing my emails and address book. How can we get Thunderbird set, there is no tool in the toolbar to enable the debugging and correction of program errors.

  I use Thunderbird version 38.1.0.

  Thank you.

  The problem solved itself, Thunderbird has just started working. I followed the thread suggested by Christ1 and found none of it applied. No malware, no browser, no certificate error security block. I did, however, in Thunderbird, under Tools/Options/General uncheck the button for "When Thunderbird launches, show the Start Page in the message box." I do know that if this helped, Thunderbird still do not access Comcast mail for hours after that, even with several stops and restarts.

  Until the next problem...

• Octoshape streaming services: could not bind to the local host. Please check your firewall configuration

  Original title:

  Octashape streaming system

  Hello

  A dialog box appears on my screen:
  Octoshape streaming services: could not bind to the local host. Please check your firewall configuration

  What should I do?

  And if this does not work between the firewall what is the solution?

  Thank you!

  [Moved from the community centre of Participation]

  You seem to have installed a useless program, Octoshape.

  http://www.bing.com/search?q=Octoshape

  You should be able to remove it from programs and features (or the list of installed programs, depending on your version of Windows.)

  Don

• "Printer settings not comply with the configuration of the router.

  Hello

  I'm trying to establish a wireless connection with my printer to my computer, but the answer above, "printer settings not comply with the configuration of the router" someone has the solution please. Peter

  Hello

   
  • What is the brand and model of the printer?
   
  You can check this link:
   
  Network printer problems
  
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-printer-problems
   
  I also suggest you to check the manufacturer support for assistance to correct the settings of the printer.

• Why my pc is not snychronize with the internet time server /Keeps saying the peer is unreachable

  My pc will not snychronize with the internet time server, how can I fix this problem, also says peer are an affordable is a firewall block perhaps?

  I would like to ask what time servers, but the following links see the/you tell how to change as you point to the servers time NIST.

  http://www.nist.gov/PML/div688/grp40/its.cfm

  http://TF.nist.gov/TF-CGI/servers.cgi

  HTH,
  John

• Homer in Windows Server does not connect to the internet.

  I installed Windows Home Server on a self-built media server. Everything on the hardware is working properly. The server software is installed. The ethernet line is connected to my Linksys router. The power light is on decision-making on the case ethernet connection. The power led is on the router where the ethernet is connected. So, in my view, that the issue is not material.
  Problems:
  1. the server does not connect to the internet.
  2. my computer does not recognize the server when I install the Windows Home Server Connector software.
  3. the wizard of Linksys on my computer does not recognize the server as a "new device".

  I feel like I'm missing a driver, maybe a driver of ethernet controller, but do not know how to diagnose the problem.  I downloaded the Windows tool that identified the problems I listed, but solutions are not feasible.

  Any suggestions?

  Hi Mikey1947,

  You can check this link, try the suggestions provided and check if that helps

  http://social.Microsoft.com/forums/en-us/whsfaq/thread/15a9e657-54a3-453F-B0E7-1efa59b7feea

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Microsoft Windows 7 is not syncronozing with the time server, what can I do about it?

  Windows does not synchronize with the time server. For me, it says that there is no previous time being synchronized on the record, but I don't see why it should not be synchronized at all!

  Have you tried one of the alternative servers?

• Can not connect with the Adobe server to upgrade the PS. Tried with fiervall and the router and called my provider. She is also only CC there are problems!

  Can not connect with the Adobe server to upgrade the PS. Tried with fiervall and the router and called my provider. She is also only CC there are problems!

  Check your hosts file.

  help for that and other adobe.com sure common connection problems read, http://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html

• Help, I changed the password of root ESXi via powerCli, now I can not connect with the web client or the console.

  Help, I've changed the root ESXi via powerCli password, now I can not connect with the web client or the console, but I can still connect to powerCli. The command I used was;

  SE connect-VIServer esxihostname-user root - password newpasswd

  This production network btw, I have connected to each host and run the above command, these ESXi hosts are not on a domain

  y at - it something I have left out. I really appreciate any assistance that you people can provide.

  Thank you, Joe

  It is probably a longshot, but a lot of things in the land of windows is not sensitive to capital letters as Unix is.  I wonder if your new password you put through powerCLI mixed uppercase in it and if the capitalization was abandoned by command windows powerCLI Analyzer, or he interpreted as all capitals or something.   If you can still get through the powerCLI you could try to reset the password again to something simple without capitalization mixed case and if your password on ESXi strategy requires a special character, try something different than a "$", like a "_" (I find that a '_' is less likely than some other special characters (, as a '-' or a ' / ' to cause problems with analyzers.).

  Edit:

  Another thing, you can try before playing with the password once again, is to create a different username ESXi using powerCLI and see if the password ends up what you think, it should be, and if you can get with the client vsphere using it.  In this way, you can find out if there are some problems with certain characters or Cap through command powerCLI Analyzer without losing your remaining root by powerCLI access.  After some tests, you can understand what went wrong with your initial password change and may be able to fix it with less risk of losing access.  I also assume that you can not create a new username on ESXi who is able to change the root password no matter what authority give you it, otherwise, you could create a new username with PowerCLI, then connect to the client vsphere with it and change the password to root from there.

• The administration server is not reachable from the node target via HTTP (S)

  Hi all
  
  I tried add Host in Oracle 12 c. I previously added Linux host OS, but I couldn't add OS AIX in 12 c. I did the auto update for Agent of AIX. You can find my OS and DB info on below.
  
  Server Oracle 12 c - OS is SunOS 5.10
  Client host Oracle 11.2.0.1.0 - OS is AIX
  
  During the installation, I got this error message "the administration server is not reachable from the node target via HTTP (S). In topology, we do not use any firewall... As I said I've added Linux and SunOS but AIX does not...
  
  How can I solve that?
  
  B.R

  You already mentioned the metalink note? Otherwise please see note

  EM 12: Agent deployment fails with error "the administration server can be reached from the node target via HTTP (S)" [1393450.1 ID]

  Kind regards
  http://www.oracleracexpert.com
  Remove the grid or the repository targets control agents
  http://www.oracleracexpert.com/2010/06/remove-grid-control-agents-or-targets.html
  Tablespace transportable export and import on the same Endian platforms
  http://www.oracleracexpert.com/2009/08/transportable-tablespace-export-import.html

• vSphere Client could not connect with the server

  Hello

  I just built a new server ESX 4.0 (update1) and tried to connect directly from the VI Client.

  He keeps fails with the following error message:

  VSphere client could not connect with the server {ip address}

  Details: The server could not interpret the customer's communication... (The remote server returned an error: (503) server unavailable.)

  I can ping the server successfully.

  Has anyone seen this problem before?

  Thank you

  for many of my cases, it's just 2-3 minutes. can you do back to the rear for connection between the server and your laptop to see there is nothing between that is causing the problem?

• Can not communicate with the server, BUT I CAN CONNECT SUCCESS TO "MANAGE SITES"

  I do NOT see the server in dw cs6 files, so I can't download or not communicate with the server, BUT I CAN CONNECT to SUCCESS OF "MANAGE SITES"... EH WELL THERE WHERE THE PROBLEM?

  

  

  In the view of the file context menu, click Remote Server

  

• Server does not start after the installation of the USB bootable, ESXi

  Hello

  I installed VMware ESXi 5 on a SSD drive using a bootable USB key, but my server does not automatically start since the SSD after installation. I can boot ESXi in the offered by the BIOS boot menu.

  The startup configuration is perhaps incorrect because during the installation of the USB drive is present, but after the installation, it is not?

  Also has anyone seen this problem?

  Kind regards

  Gijsbert

  Updating the BIOS on the DQ77MK at 49, and you should be able to start - UEFI must never be activated.