ESXi 5.1 update 1 crashing randomly with Exception 14 purple #PF screen

Similar Questions

• 5.5 ESXi. U1/2 crashes randomly at setup time

  I'm trying to install ESXi 5.5 for two weeks, have been plagued with ESXi 5.5 U1/U2 hung at random stages without apparent reason. I am driven crazy with the absence of any suspicion of newspaper or error whatsoever.

  Random steps involved are:

  -user load successfully

  -loading lgb

  -loading lacp

  -loading ipmi_si_drv

  I could not discern any pattern between these occurrences (I have reset the system at least 100 times).

  I have a screenshot of console complete one of these hanging here-> https://www.youtube.com/watch?v=KFzFjyw9kBU

  This crash is captured with ignoreHeadless = TRUE flag spent... without this indicator, this step is successfully resolved, but fails at the step of «loading lgb...» "... result is the same - just a screen empty and either it resets the physical machine or the computer must be restarted manually.

  It was captured with ESXi 5.5 U1 but the same with U2. I'm literally lost and can't even begin to think about what to do next... any help is greatly appreciated

  Material is given in the video, but here it is again:

  -SuperMicro X10SLM + f

  -16 GB Crucial RAM ECC

  -start-up out of Sandisk Extreme 32 GB USB stick (Rufus used to put the ISO on key, use the MBR or no UEFI)

  ignoreHeadless does not help.

  IgnoreHeadless = TRUE flag used to help until I have decided the speed of the fan and did the following:

  -used freeIpmi 1.3.4 to fund the fan settings and commit new ones (that took place without problems)

  -given that the fans do not change their speed at the start I tried to Load Optimized Defaults (which did not help, but I soon discovered that I had to toggle power on motherboard fully as IPMI loaded the new settings)

  So I currently think that a 'broken' stuff ESXi install - even if I would find it is amazing. Trying to load the IPMI factory defaults did nothing.

  Any ideas or suggestions? I am beyond desperate at this point.

  So after much fussing around and pull the hair, I have to admit I had accidentally stumbled upon the solution.

  The question I had was not the strange material or a technical failure (RAM sticks are healthy and their removal or disabling LAN did nothing to help) - is the fact that I tried to install ESXi host without and attached to all SATA drives. As soon as I attached the SATA drive, just to have on hand, everything worked perfectly.

  It was a totally accidental discovery - in a moment of desperation, I tried to start CentOS 7 ISO installation in an effort to install and boot from a USB stick (if all goes well to go even further and make a diagnosis). It failed with exactly the same symptoms as the ESXi except - he threw a message similar to 'no controller attached. That immediately caught my attention because it is the last stable and free distribution of server-level, which is not expected to have problems. Therefore, it must be the kernel itself (which is probably the only thing ESXi distro and CentOS7 have in common) behaves erratically when no SATA drive is connected. Helped by the message (which lacked efforts ESXi), I connected the HARD drive and - Oh surprise - everything that took place without a hitch.

  My conclusion is this: for reasons that escape me, it seems (stock)? Linux kernel is having major problems installing on a system without attached SATA drive. Did just that manifests itself in this way with only this particular motherboard or other hardware component? I have no idea and would not to test any more - I'm just glad it works now.

  On a personal note, I have worked with computers for the past 25 years, and this must be one of the best moments of bizzare/wtf 5 I've ever had.

  HTH someone.

• After update my iPad Pro with 9.3 iOS iPad crashes on safari. For example I googled something results appear, but I am not able to enter any page, because the iPod does not respond

  After update my Pro iPad with iOS 9.3 iPad crashes on Safari. Example I googled something results appear, but I am not able to enter any page

  It seems that it is a result of the update. Other users report it, and I also read that Apple is aware of the problem and working on a fix. Be patient and watch for an update. Some have reported that disabling Java script has worked for them. You need to check yourself.

• Problem with Windows 7 Service Pack 1: the update process crashes during every start/restart

  Hello.

  I downloaded the SP1 for Windows 7 from Microsoft Download Center (I had the Ultimate 64-bit edition initially installed on my computer). I ran the installer and went through the process of updating until the first reboot. Since that time, my system is unbootable not. Windows 7 starts to run and then the SP1 update process runs and applies the changes to the registry and system files. After awhile, the update process freezes and I have to turn off the computer with the power switch. This is repeated again and again each time you start. He stops to date when he reached update number 117880 of 334835 or 334835 117930 (but not always these specific), and he is trying to change some registry entries apparently: 'operation 334835 (\Reg...) 117880 update application', this is what is shown on the screen below the still glowing Windows logo.

  In addition the secure boot mode, startup mode safe with networking, security console startup mode, last known good configuration options do not work. They all start to load but crash after a while (as if the same SP1 update process has been run in silent mode).

  I don't want to reinstall Windows 7 from zero and all the applications that have been installed. The ERD that I generated after my initial installation can not solve the problem, nor the Windows 7 can install DVD. It doesn't let me do an upgrade from the original DVD since it has not be started from the hard drive and then launched from within Windows 7.

  I looked in several discussions of the forum and found that my NTFS partition is marked 'active' as it should.

  I plugged my HARD drive on another computer and have access to its content.

  So is it possible to stop this automatic process and be able to start (in the original state of Windows 7)? At least to re - install Windows 7 via the DVD upgrade mode and then installing SP1 on a little further.

  Perheaps the log files from the SP1 update process could be useful, but I don't know where they are on the HARD drive.

  Thanks for your help.

  Yo_54.

  So is it possible to stop this automatic process and be able to start [...]?

  Hello.

  My startup problem is resolved. Now I can start Windows 7 and use my system again.

  I used the dism.exe tool back updates on hold through a wire found in the TechNet Forums: "C000009A update operation 334565 (\Registry\...) 119595 application error". loading SP1"(see link below).

  I launched WinRE with my Windows 7 installation DVD, selected my C: partition where Windows 7 has been installed, click on the button 'Next', refused to the proposed repair phase, and then chose the prompt for commands and typed:

  DISM.exe / Image: c: \ / Cleanup-Image /RevertPendingActions

  It took less than 15 minutes for the tool to the end I restarted my computer and waited a few operations update, then Windows restarted and more, and finally I was on my homescreen. After my connection, a dialog box been told that SP1 was installed (the winver.exe command showed that SP1 installed too).

  I think that now that I have completely will be re - install Windows 7 in upgrade mode, recheck all the pre-requisites for SP1, uninstall all language but English modules, uninstalling my anti-virus and anti-spyware programs disconnect you from the Internet and run the standalone SP1 install package. I'm going to see if the problem is persistent and keep you posted.

  But first I'll make an image of my C: drive system and store it somewhere safe!

  I found the solution through this thread in the TechNet Forums:

  http://social.technet.Microsoft.com/forums/en-us/w7itproinstall/thread/cad66cc7-9912-4cbe-898F-ad8ff9344308

  Best regards.

  Yo_54 (Johann).

• ESXi 5.0 Update 1 with view Mode Local

  I have problems using view Mode Local with ESXi 5.0 Update 1. When I try to go on the computer I get the following error, "this office cannot be extracted. The client does not support hardware version of the virtual machine. "We use View 5.0.1 Build-640055. At first I thought the View Client provided by the display server had not caught up with the hardware version of 5.0 update 1, so I downloaded and installed View Client 5.1.0 Build-704644 and I still get the same message. If someone could provide no indication about this it would be greatly appreciated. Thank you.

  8 Virtual material could not be used with 5.0 and local mode view.

  Upgrade in 5.1 mode

  Thread moved view area.

• Skype crashing randomly

  Since some updates my Skype crashes randomly every few minutes.

  It started with the following symptom: whenever my woud disk HARD secondary spin up because I navigated to it in Windows Explorer when Windows Explorer and Skype would freeze and then finally Skype would break, release of Windows Explorer.

  I changed the HARD drive forever and Skype still crashes randomly, even when I'm not using it but just it open in the background. Sometimes it works fine until half an hour before crashing, it takes less than a minute sometimes for her crashing again after the reboot.

  I tried to completely reinstall Skype (including remove the Skype of AppData folder) but it has not fixed the accidents (a new installation of Skype with an existing user is annoying as hell, you will hear the DING almost constantly while it receives all messages passed...).

  I have attached the report of the Windows event log below.

  Thanks in advance for a solution.

  Try first update your NVIDIA driver:

  http://www.GeForce.com/drivers/results/96885

• Laptop crashing randomly while game

  Hey,.

  I usually use my for cell phone games on. I played a lot of games and when Im done with the game I uninstall it. I tend to play online MMO and I was playin sleep since March and started playin World Of Warcraft has recently also. However, lately, the laptop crashes randomly when reading and my games and then sometimes struggled to turn back on.

  I was wondering if it was an internal error with the fan, because it's very hot, or if I need to update the graphics drivers so it doesn't crash. I don't really know how to solve the problem and I can play games for 5 minutes before the laptop crashed and turns off.

  Hi Jack

  It will be interesting to know what model of laptop you have. I presume that it is typical of overheating problem. When the temperature of the material is essential the laptop turns off simply without any warning. The same thing happens to you?

• Cisco router restarts randomly with Bus error

  Cisco router restarts randomly with the following error:

  System has been restarted by error of bus to PC 0x4183614C, speech 0 x 95848 at 09:30:28 UTC Tuesday, April 23, 2013

  I've pasted below see the chimneys and release the version.

  view the stacks

  
  

  Minimum factory chimneys:

  Format name / free

  5396/6000 inspect Init Msg

  Subsystem SPAN 5368/6000

  58920/60000 EEM Auto record Proc

  Automatic start of 4772/6000 upgrade process

  DIB 5164/6000 error message

  HAND OF SASL 5396/6000

  4968/6000 LICENSE DEFAULT AGENT

  5368/12000 Init

  4216/6000 update prst

  4384/6000 VPN_HW_MIB_CREATION

  5188/6000 RADIUS INITCONFIG

  Update process random rom 2128/3000

  8356/12000 SSH process

  Stats URPF 5316/6000

  Interruption of battery level:

  Level named format / unused

  Network interfaces 1 1484828 6284/9000

  2 3264990 8548/9000 DMA/Timer Interrupt

  3 1 8388/9000 PA Int management Manager

  Console 4 115 8612/9000 Uart

  External interrupt 5 0 9000/9000

  NMI 7 223352 8564/9000 interrupt handler

  Spurious interrupts: 11

  System has been restarted by error of bus to PC 0x4183614C, speech 0 x 95848 at 09:30:28 UTC Tuesday, April 23, 2013

  Software of 2800 (C2800NM-ADVSECURITYK9-M), Version 12.4 (24) T, RELEASE SOFTWARE (fc1)

  Technical support: http://www.cisco.com/techsupport

  Updated Thursday 25 February 09 17:55 by prod_rel_team

  Image text-base: 0 x 40011240, database: 0x42B41940

  The failure of the system stack trace:

  FP: 0X472252B8, RA: 0X4183614C

  FP: 0 X 47225310, RA: 0X418312F8

  FP: 0 X 47225348, RA: 0X41647DC0

  FP: 0X472253A8, RA: 0X4164A8F4

  FP: 0 X 47225428, RA: 0X4164B248

  See the version

  
  

  Cisco IOS software, 2800 Software (C2800NM-ADVSECURITYK9-M), Version 12.4 (24) T, RELEASE SOFTWARE (fc1)

  Technical support: http://www.cisco.com/techsupport

  Copyright (c) 1986-2009 by Cisco Systems, Inc.

  Updated Thursday 25 February 09 17:55 by prod_rel_team

  ROM: System Bootstrap, Version 12.4 (1r) [hqluong 1r], RELEASE SOFTWARE (fc1)

  availability of Cisco is 28 minutes

  System returned to ROM by bus to the 0x4183614C PC error, address 0 x 95848 at 09:30:28 UTC Tuesday, April 23, 2013

  System image file is "flash: c2800nm-advsecurityk9 - mz.124 - 24.T.bin".

  This product contains cryptographic features and is under the United States

  States and local laws governing the import, export, transfer and

  use. Delivery of Cisco cryptographic products does not imply

  third party approval to import, export, distribute or use encryption.

  Importers, exporters, distributors and users are responsible for

  compliance with U.S. laws and local countries. By using this product you

  agree to comply with the regulations and laws in force. If you are unable

  to satisfy the United States and local laws, return the product.

  A summary of U.S. laws governing Cisco cryptographic products to:

  http://www.Cisco.com/WWL/export/crypto/tool/stqrg.html

  If you need assistance please contact us by mail at

  [email protected] / * /.

  Cisco 2821 (revision 53.51) with 1036288K / 12288K bytes of memory.

  Card processor ID FCZ1017732F

  2 gigabit Ethernet interfaces

  2 modules of virtual private network (VPN)

  Configuration of DRAM is wide with parity 64-bit capable.

  239K bytes of non-volatile configuration memory.

  250880K bytes of ATA CompactFlash (read/write)

  Configuration register is 0 x 2102

  You want to use the tool interpreter of output for this work:

  http://www.Cisco.com/pcgi-bin/support/OutputInterpreter/home.p

  For more information about the resolution of crashes, see this article:

  http://www.Cisco.com/en/us/products/HW/IAD/ps397/products_tech_note09186a00800b4447.shtml

  In this case, it looks like CSCsy09250, described here:

  http://www.Cisco.com/en/us/products/CSA/Cisco-SA-20100324-SCCP.html

  You should contact Cisco for the software updated by following the instructions of this bulletin.

  That crash possibly caused by part of sone intentionally sends out packets malformed to your device, so if you have reason to believe that someone in your community could run metasploit or similar "Penetration Testing" tools, you can look into that as well.

• How to access the software so that I just paid. I assigned to a user. The user connects and subscription is not found. The site seems to crash randomly and just sends me in circles. How can I get a refund is my next question.

  How to access the software so that I just paid. I assigned to a user. The user connects and subscription is not found. The site seems to crash randomly and just sends me in circles. How can I get a refund is my next question.

  [Profanity removed... MOD]

  Hello

  I just checked the details of your team, and the license that you have assigned intervenes as well on the same Adobe ID.

  Please see the below help documents:

  Applications creative Cloud back in test mode after an update until 2015 for CC

  Solutions to connection errors, activation and connection with creative Cloud applications and Creative Suite

  Kind regards

  Sheena

• Firefox26 crashing randomly in Windows 7

  Firefox26 crashes randomly in Windows7 for about a week. I have tried all the following:
  -People with disabilities all add ons
  -Created a different user profile

  Sync is disabled. It happens on different Web pages.

  How can this be repaired?

  now, I'm curious to know how it happened - prevented accidents?

• Firefox on Windows 8 crashes randomly

  I have the latest version of Mozilla Firefox on my Windows PC. Mozilla crashes randomly and crashed almost 10 to 20 times last night when my mother was checking his email and Facebook. I went to the about: crashes page and here are the IDS of the reports. Any help would be much appreciated.

  BP-e81e50fa-e71c-4202-A611-36c7b2130222
  BP-f393ac38-97fa-4455-88FC-dd2e92130221
  BP-a47d00bd-9de5-4a63-a5ee-38ab32130221
  BP-3b059c6d-F97C-4ef3-BD22-be2022130221
  BP-15595200-7acc-4a21-84fe-a80c42130221
  BP-de0bf0b0-7bd5-45BC-A472-ab21d2130221

  I use Windows 8 with an AMD Radeon HD 6XXX/7XXX card and felt the constant system crashes (i.e., Blue Screen of Death) using Firefox 19 before finding this thread. Return to 18.2 Firefox has worked perfectly - thank you very much for providing relief, because I thought that I had to reinstall my OS.

• Firefox crashes several times a day. I haven't found one yet. It crashes randomly, I guess.

  Firefox crashes. I think that Facebook is still running. I tried in safe mode and with all plugins disabled but it keeps crashing randomly. A few days without accidents at all. A few days three crashes in one minute.

  This seems to have solved the problem:

  Repair of TCP/IP stack for use with Vista or 7 options.

  Start - all programs - accessories and do right click on command prompt, select "Run as Administrator" to open a command prompt.

  Restore the default install WINSOCK entries: netsh winsock reset catalog

  Reset the battery TCP/IP IPv4 default installation. netsh int ipv4 reset reset.log

  Reset the battery TCP/IP IPv6 default installation. netsh int ipv6 reset reset.log

  Reboot the computer.

• Skype crashes randomly every few minutes.

  Hello

  I have problem with my Skype for about month. IM using latest version of Skype. But it crash randomly every 5 to 40mins. It just stop responding. This is the screenshot of my event log.

  Any help is very apraciated!

  Thank you

  Windows 8.1

  

  What I don't know, but you can try with an older version of Skype.

  http://community.Skype.com/T5/Windows-desktop-client/Skype-crashing-constantly/m-p/3956293#M341659

• Update KB2434419 crashes

  Update KB2434419 crashes 50% installation point: everyone has ideas on how to close it, remove it, weaken it, blow with a Claymore?

  Hello RReillySeaIsland,

  Thank you for your message.  When the installation starts, a second window opens in the background asking you if you want to upgrade or perform a complete installation of the software.  This occurs at 50% and is probably the reason why your installation seems to freeze.  Once the choice is made, the installation will continue as planned.  Please let us know if it did or did not help to solve your problem.

  See you soon

  Jason H. Engineer Support of Microsoft answers visit our Microsoft answers feedback Forum and let us know what you think.

• Windows 2000 update stops at "checking if your computer has the latest version of Windows Update software for use with the site... »

  When I try to update Windows 2000 by using Windows Update, web site crashes the message

  'Check if your computer has the latest version of Windows Update software for use with this web site... The Web site uses ActiveX controls to determine which version of the software your computer is running. "If you see an ActiveX warning, make sure that the control is digitally signed by Microsoft before installing it or allowing him to run.

  Y at - it a fix for this problem?

  This problem may occur in Windows 2000, Windows 2000 SP1 and Windows 2000 SP2 on computers. These versions are no longer compatible with the Windows Update Web site. To resolve this problem, you need to install the latest Service Pack for Windows 2000 computers. Follow the link below to access the article and get with the latest Service Pack.

  http://support.Microsoft.com/kb/260910

  Bobby