ESXi to Cisco custom Esxi 6.0 6.0

Similar Questions

• Standard Cisco Custom Image vs ESXi ESXi VMware image

  How the image Cisco Custom ESXi differ from the standard image of VMware ESXi, and how is it important to use Cisco image when the material of the UCS is used to run ESXi?

  It is not a problem in itself. The ISOs of VMware GA come with drivers for real Cisco VMware team has put at their disposal to the release date.

  Cisco made its own assessment of the release of vSphere, and if they determine that an updated driver is needed, they release a.

  The recommended practice is to check the compatibility UCS site to confirm the version numbers of driver that you use depending on your combination of hardware, UCS version and version of vSphere.

• Free license for Esxi 6.0 Cisco custom ISO

  Dear all,

  Is it possible to get the free license for Esxi 6.0 custom cisco ISO? or what can I use standard 6.0 for Cisco 6.0installation custom Esxi Esxi free license key?

  I could find the free license only for Esxi 6.0 standard image customized Cisco.

  Thank you.

  Welcome to the community,

  Cisco and other hardware providers offer ESXi images customized to support their equipment. However, the customization is made by adding/replacement drivers and tools. The base is still the same original VMware image. There is no specific license provider.

  André

• Import image Cisco Custom ESXi in MUV

  Recently updated vCenter 5.1 and vSphere Update Manager (VUM) 5.1 I can import the image of vSphere "regular" very well, which is good news for most.

  However, we have the cluster that is a cluster of UCS.  I'm pretty new to the whole idea of the UCS, but my understanding is that we should use images of installation custom of Cisco.  I downloaded two since the VMware download page.  One for 5.0 and 5.0 Update 1.

  Any in MUV.  The error message is "update package cannot be used with VMware Update Manager vSphere." downloaded

  Advice?

  Thanks for the info. I guess step 1 should read "Update U1 5.0 to 5.1", as the downgrade is not taken in charge.

  By design, VUM 5.1 supports upgrades from the host through the ISO images to the final retail version level - which, in this case, is ESXi 5.1. The ISO images to which you pointed out in step 2 are lower ESXi version (5.0), so this isn't an upgrade path supported in AUVS 5.1.

  If you want to upgrade to ESXi ESXi 5.1 through 5.1 VUM bed and breakfast - use ESXi 5.1 images.

  If you want to upgrade to 5.0 U1 ESXi ESXi hosts and you don't have in your environment - VC/VUM 5.0, you can use the different upgrade mechanisms.

• Cisco UCS C240M4 Esxi installation version 5.0 cisco custom image do not start

  Hi all

  We are trying to install ESXi 5.0 on Cisco UCS C240M4 server and during loading of the VMware purple screen with the following error

  Bora/vmkernel/hardware/apic.c:1913 and bora/vmkernel/hardware/apic.c:1915 NOT_IMPLEMENTED NOT_IMPLEMENTED.

  Greetings.

  ESXi 5.1 U2 is the first supported by Cisco for the C240M4. See matrix interop

  I suspect that older versions 5.0 and earlier versions will have problems with the latest chipsets, as well as the lack of 12 GB storage controller drivers.

  You will want to check the interop matrix for which OS versions are supported as well as different levels of driver for the network cards, storage, etc.

  Thank you

  Kirk...

• Cisco Custom Image patch

  Hello

  I installed a custom Image Cisco ESXi 5.5 in a UCS C220 M3 and I would like to know if I can install patches using Update Manager as I do with a default image. I don't know if I'm having problems because some patches to update the drivers of ESXi and could, for example, replace the Cisco enic and the fnic.

  I know that HP and Dell have their deposits that I can use with the Update Manager, but can not find something like that for cisco.

  Thank you

  Hi theire,.

  so in recent years, I stayed away from custom provider Isos. Reason is that Vmware is not happy with the custom ones when facing problems. They are pointing to another seller trying to manage Ticket support.

  As for that so I just used for years a clean default Vmware Image as well as all the necessary drivers I inject later. Manually or via the Update Manager.

  Had more problems with Isos by default then with fully customized supplier ones.

  But back to the Question.  If you want to update the driver for Cisco, then you could download those most recent supported because you're model and add in you're Manager Update.

  Best regards

  Max

• Cisco C220 M3 - ESXi installation - is ESXi free?

  Hi guys,.

  I want to install ESXi Server C220 M3. I think that ESXi is free but I'm not sure. Do need me a permit for the Cisco custom ESXi image?

  I also have another server C220 M3 distinct from each other. For this one, I have a license vSphere Enterprise license. Do I need another license of ESXi here?

  Thank you.

  At the end of 60 days, to change the 'license' to the ESXi installation to get a perpetual license (with much reduced features) key of VMware.

  Basis of VMware and virtuallisation managed with the vi client is included in the free license, but no vCenter and all the goodies that come with it.

• Cisco UCS 260 M 2 5.5 U3 - custom image and compatibility

  TAC has a customer turned and pointed toward a compatibility table for an installed UCS - C 260M 2, stating that the firmware of the UCS and the latest version of Vmware is not supported.

  They are suggesting that the client moves to fimware 1.5 (9) and they use a customized image of Cisco for Vmware.

  This facility is for UC/EAC, so I have to make sure that the versions supported in the docwiki for these products as well is the Vmware version.

  http://www.Cisco.com/Web/TechDoc/UCS/interoperability/matrix/matrix.html

  The drop down menu shows Vmware 5.5 U3 is a supported version and I find that 5.5 is supported in the dockwiki. So far so good.

  However, when I try to find a custom image for 5.5 U3 image only I find it:

  https://my.VMware.com/Web/VMware/details?ProductID=353&downloadGroup=OEM...

  VMware 5.5 U3a. The version of the driver specified on this page do not match driver versions indicating the interoperability matrix must be used.

  First, is there a customized image of Cisco for 5.5 U3, could someone point me to this image so that these versions of the drivers are the same?

  Secondly, can I use ISO customized Cisco to upgrade a vanilla install Vmware 5.1 U3?

  -GDR

  Greetings.

  The Cisco Custom images are just a collection of pilots who were up-to-date at the time wherever it has been presented to VMware.  It is expected that iso custom will exactly match the interoperability matrix (it could have at the time, it was created), but at least provide newer drivers than what is usually installed in the general VMware releases.

  The interoperability matrix will list the specific driver, i.e. igb driver intel 1 GB network interface.  Download you the version of the driver for VMware site and install adapt you to the requirements notified by the interoperability matrix.

  You should be able to use a custom Cisco ISO to upgrade.  When your custom installation ISO analyzes your existing system, it will see a higher version of the drivers/VIBs and update those.  The Cisco with custom isos are simply the original VMware updated versions the drivers injected into them.

  Thank you

  Kirk...

• Cannot install esxi 5.5.0 u1 on UCS C220 M3S with version 2.0.1a - no network card

  Hello world

  I have a big pb installing esxi5.5.0 U1 on a UCS C220 M3S with version 2.0.1a. I get this message: no network adapters.

  I found a lot of post on the internet that say to do a custom installation CD, what I have done but without success. I also try to use the iso installation Cisco custom, with the same result...

  I have not anderstand what happen as the MMIC see network interfaces...

  Here's my hardware:

  Firmware of Intel I350 1 Gbps 0x80000AA4 network controller - 1.446.1

  Firmware Interl Server Ethernet adapt I350-T4 0x80000AA6 - 1.446.1

  BIOS 220M3.2.0.1a.0 (Build Date: 28/04/2014)

  MMIC 2.0(1a)

  According to Vmware Compatibility Guide, this version is compatible with: C220M3.2.0.1a.0.042820140020 of Cisco Systems, Inc.

  http://www.VMware.com/resources/compatibility/detail.php?deviceCategory=...

  and by Cisco Compatibility guide also: http://www.cisco.com/web/techdoc/ucs/interoperability/matrix/matrix.html

  If the ideas?

  Thanks a lot for your help.

  Concerning

  Similar situation discussed in

  https://supportforums.Cisco.com/discussion/12189941/no-compatible-networ...

  It is possible that the optionROM for the integrated card is not activated.  Try to enable it in the BIOS, you can via the MMIC (see cimc_enable_optionrom) must attached. You also want to verify that this option gets enable in the bios.
  You can enter the bios by pressing f2 during boot (see BIOS_Option_ROM)

• Update Cisco UCS

  Hi all

  We have Cisco N20-B6625-1 and Cisco R210-2121605W, who are running custom ESXi Image 5.1 update 2 Build 1483097VMware. I'd like to update update 5.1 3 but I do not know if I have to apply the custom picture again or is it OK if I just updated the deployment newest.

  Thanks in advance,

  Matt

  Hi Matt,

  Depends on the cards (network card, raid controllers, HBAs, etc.) that are installed on your servers. You need to check the driver version of these components between the two versions, if drivers has not changed, you can you can just update the deployment more recent, but if they change, you can use the custom image for 5.1 U3 or update the drivers manually.  To check the version of drivers see link below for the compatibility matrix.  I have also copy a link to the download page for Cisco custom esxi 5.1 u3. Let me know if it helps.

  Cisco UCSM compatibility matrix

  http://www.Cisco.com/Web/TechDoc/UCS/interoperability/matrix/matrix.html

  Cisco Cisco 5.1 custom u3

  https://my.VMware.com/Web/VMware/details?downloadGroup=Cisco-ESXi-5.1.0U...

• SafeNet and Cisco VPN Client Compatible?

  I have been using the Cisco VPN for quite awhile with no problems. Recently, we have added a Watchguard Firebox somewhere else and have installed the Client of Watchguard MUVPN, otherwise known as a customer of Safenet.

  Since the installation, I could not yet properly use the Cisco Client. If I disable the two Services of Safenet, I invited to my user id and password and connect to the Cisco Concentrator and get an ip, etc. However, I can't ping anything on the network.

  My solution is to completely uninstall both clients and reinstall the Cisco by itself. This is not very practical.

  If anyone know a fix for this I'd appreciate comments.

  Thank you

  Patrick Dunnigan

  Hi Patrick,

  I only got lucky with the SafeNet customer brand Watchguard with the 4.0.x releases of the Cisco client. I think Cisco 4.6 clients use a newer driver from the DNE or else that plays well with SafeNet.

  In any case, here's how to set up PC that requires both clients:

  First, install the Cisco VPN client. Restart the application, and then stop and disable the Windows service.

  Install the client for Watchguard, reboot as requested.

  Then, stop and set to manual both SafeNet services, then start and set to automatic the Cisco service.

  Delete the shortcut in your Start menu Startup group safecfg.exe (or the key of HKLM\MS\Windows\CurrentVer\Run, where he gets set.)

  Delete the shortcut to start for the Cisco VPN client as well.

  Whenever you want to use the Cisco customer, you can just launch the Dialer to IPSec. If you want to run the SafeNet client, stop the Cisco service, start the services of SafeNet, then run safecfg.exe. A few batch files facilitate this process for users.

  Hope that helps,

  Chris

• Cisco VPN Client connected, but no secure way.

  Hello

  I can connect to a VPN server smoothly, but once connected, I'm not able to reach all local resources. When I looked at the stats of customer VPN, it shows only a single route in 'Details of the route--> secure routes', 1.1.1.1 255.255.255.255. This is the reason why I can't access any resource. This could be the cause of this problem? How can I secure roads announcing cisco customer? I don't have access to the server, but I will ask the person who can make changes.

  Thank you.

  Kind regards

  Shivani

  Shivani,

  Split tunneling is what you're looking for, it will affect your secure routes.

  Marcin

• [SOLVED] Native Iphone4s Cisco VPN client cannot establish the tunnel (victory clients do)

  Hello

  IPhone 4 s last IOS5 V 5.1.1 installed

  I'm not able to make the native IPSEC VPN connection upset my company Cisco 877

  Instead, all my computer laptop and netbook with Cisco VPN Client work installed fine when they connect remotely to society 877

  Turn debugging 877, it seems Iphone successfully passes the 1 connection ike (actually Iphone wonder phase2 user/pass), but it hung to phase2 give me the error 'Negotiation with the VPN server has no' back

  An idea or a known issue on this?

  This is how I configured my VPN 877 part:

  R1 (config) # aaa new-model

  R1 (config) # aaa authentication default local connection

  R1 (config) # aaa authentication login vpn_xauth_ml_1 local

  R1 (config) # aaa authentication login local sslvpn

  R1 (config) # aaa authorization network vpn_group_ml_1 local

  R1 (config) # aaa - the id of the joint session

  Crypto isakmp policy of R1 (config) # 1

  R1(config-ISAKMP) # BA 3des

  # Preshared authentication R1(config-ISAKMP)

  Group R1(config-ISAKMP) # 2

  R1(config-ISAKMP) #.

  R1(config-ISAKMP) #crypto isakmp policy 2

  R1(config-ISAKMP) # BA 3des

  Md5 hash of R1(config-ISAKMP) #.

  # Preshared authentication R1(config-ISAKMP)

  Group R1(config-ISAKMP) # 2

  Output R1(config-ISAKMP) #.

  R1 (config) # CUSTOMER - VPN crypto isakmp client configuration group

  R1(config-ISAKMP-Group) # key xxxxxxxx

  R1(config-ISAKMP-Group) # 192.168.0.1 dns

  R1(config-ISAKMP-Group) # VPN - pool

  ACL R1(config-ISAKMP-Group) # 120

  R1(config-ISAKMP-Group) max-users # 5

  Output R1(config-ISAKMP-Group) #.

  R1 (config) # ip local pool VPN-pool 192.168.0.20 192.168.0.25

  R1 (config) # crypto ipsec transform-set encrypt-method-1 esp-3des esp-sha-hmac

  R1 (config) # crypto ipsec VPN-profile-1 profile

  R1(IPSec-Profile) # set the transform-set encrypt method 1

  Tunnel type interface virtual-Template2 R1 (config) #.

  R1(Config-if) # ip unnumbered FastEthernet0/0

  R1(Config-if) # tunnel mode ipsec ipv4

  Ipsec protection tunnel R1(Config-if) # VPN - profile - 1 profile

  Profile of R1 (config) # isakmp crypto vpn-ike-profile-1

  R1(conf-ISA-Prof) # match group identity CUSTOMER VPN

  R1(conf-ISA-Prof) # vpn_xauth_ml_1 list client authentication

  R1(conf-ISA-Prof) # isakmp authorization list vpn_group_ml_1

  R1(conf-ISA-Prof) # client configuration address respond

  R1(conf-ISA-Prof) virtual-model # 2

  Then run AccessList 120 for desired traffic ("access-list 120 now allows ip any any")

  I have configured my VPN Cisco "CUSTOMER-VPN" clients and relative password

  Whenever they connect, they are prompted for the password and username phase2 then they join the VPN with an IP address from local subnet released.

  With the same parameters required and confirmed in section ipsec VPN Iphone it does not work.

  It's 877 isakmp debug output after that Iphone wonder name of user and password (then I suppose that phase 1 completed):

  * 14:29:30.731 May 19: ISAKMP (0:2081): received 151.38.197.143 packet 500 Global 500 (R) sport dport CONF_XAUTH

  * 14:29:30.735 May 19: ISAKMP: (2081): responsible for operation of 151.38.197.143 of treatment. Message ID =-1427983983

  * 14:29:30.735 May 19: ISAKMP: Config payload RESPONSE

  * 14:29:30.735 May 19: ISAKMP/xauth: response XAUTH_USER_NAME_V2 attribute

  * 14:29:30.735 May 19: ISAKMP/xauth: response XAUTH_USER_PASSWORD_V2 attribute

  * 14:29:30.735 May 19: ISAKMP: (2081): node-1427983983 error suppression FALSE reason "made with Exchange of request/response xauth.

  * 14:29:30.735 May 19: ISAKMP: (2081): entry = IKE_MESG_FROM_PEER, IKE_CFG_REPLY

  * 14:29:30.735 May 19: ISAKMP: (2081): former State = new State IKE_XAUTH_REQ_SENT = IKE_XAUTH_AAA_CONT_LOGIN_AWAIT

  * 14:29:30.743 May 19: ISAKMP: node set 1322685842 to CONF_XAUTH

  * 19 May 14:29:30.747: ISAKMP: (2081): launch peer 151.38.197.143 config. ID = 1322685842

  * 19 May 14:29:30.747: ISAKMP: (2081): lot of 151.38.197.143 sending my_port 500 peer_port 500 (R) CONF_XAUTH

  * 14:29:30.747 May 19: ISAKMP: (2081): sending a packet IPv4 IKE.

  * 14:29:30.747 May 19: ISAKMP: (2081): entry = IKE_MESG_FROM_AAA, IKE_AAA_CONT_LOGIN

  * 14:29:30.747 May 19: ISAKMP: (2081): former State = new State IKE_XAUTH_AAA_CONT_LOGIN_AWAIT = IKE_XAUTH_SET_SENT

  * 14:29:31.299 May 19: ISAKMP (0:2081): received 151.38.197.143 packet 500 Global 500 (R) sport dport CONF_XAUTH

  * 14:29:31.299 May 19: ISAKMP: (2081): responsible for operation of 151.38.197.143 of treatment. Message ID = 1322685842

  * 14:29:31.299 May 19: ISAKMP: Config payload ACK

  * 19 May 14:29:31.303: ISAKMP: (2081): XAUTH ACK processed

  * 14:29:31.303 May 19: ISAKMP: (2081): error suppression node 1322685842 FALSE basis "Mode of Transaction.

  * 14:29:31.303 May 19: ISAKMP: (2081): talking to a customer of the unit

  * 14:29:31.303 May 19: ISAKMP: (2081): entry = IKE_MESG_FROM_PEER, IKE_CFG_ACK

  * 14:29:31.303 May 19: ISAKMP: (2081): former State = new State IKE_XAUTH_SET_SENT = IKE_P1_COMPLETE

  * 14:29:31.303 May 19: ISAKMP: (2081): entry = IKE_MESG_INTERNAL, IKE_PHASE1_COMPLETE

  * 14:29:31.303 May 19: ISAKMP: (2081): former State = new State IKE_P1_COMPLETE = IKE_P1_COMPLETE

  * 19 May 14:29:31.303: IPSEC (key_engine): had an event of the queue with 1 KMI message (s)

  * 14:29:31.315 May 19: ISAKMP: (2081): entry = IKE_MESG_INTERNAL, IKE_PHASE1_COMPLETE

  * 14:29:31.315 May 19: ISAKMP: (2081): former State = new State IKE_P1_COMPLETE = IKE_P1_COMPLETE

  * 14:29:31.623 may 19: ISAKMP (0:2081): received 151.38.197.143 packet 500 Global 500 (R) sport dport QM_IDLE

  * 14:29:31.623 may 19: ISAKMP: node set-851463821 to QM_IDLE

  * 14:29:31.623 may 19: ISAKMP: (2081): responsible for operation of 151.38.197.143 of treatment. Message ID =-851463821

  * 14:29:31.623 may 19: ISAKMP: Config payload REQUEST

  * 14:29:31.623 may 19: ISAKMP: (2081): verification of claim:

  * 14:29:31.623 may 19: ISAKMP: IP4_ADDRESS

  * 14:29:31.623 may 19: ISAKMP: IP4_NETMASK

  * 14:29:31.623 may 19: ISAKMP: IP4_DNS

  * 14:29:31.623 may 19: ISAKMP: IP4_NBNS

  * 14:29:31.623 may 19: ISAKMP: ADDRESS_EXPIRY

  * 14:29:31.623 may 19: ISAKMP: APPLICATION_VERSION

  * 14:29:31.623 may 19: ISAKMP: MODECFG_BANNER

  * 14:29:31.623 may 19: ISAKMP: domaine_par_defaut

  * 14:29:31.623 may 19: ISAKMP: SPLIT_DNS

  * 14:29:31.623 may 19: ISAKMP: SPLIT_INCLUDE

  * 14:29:31.623 may 19: ISAKMP: INCLUDE_LOCAL_LAN

  * 14:29:31.623 may 19: ISAKMP: PFS

  * 14:29:31.623 may 19: ISAKMP: MODECFG_SAVEPWD

  * 14:29:31.623 may 19: ISAKMP: FW_RECORD

  * 14:29:31.623 may 19: ISAKMP: serveur_sauvegarde

  * 14:29:31.623 may 19: ISAKMP: MODECFG_BROWSER_PROXY

  * 14:29:31.627 May 19: ISAKMP/author: author asks for CUSTOMER-VPNsuccessfully group AAA

  * 14:29:31.627 May 19: ISAKMP: (2081): entry = IKE_MESG_FROM_PEER, IKE_CFG_REQUEST

  * 14:29:31.627 May 19: ISAKMP: (2081): former State = new State IKE_P1_COMPLETE = IKE_CONFIG_AUTHOR_AAA_AWAIT

  * 14:29:31.627 May 19: ISAKMP: (2081): attributes sent in the message:

  * 19 May 14:29:31.627: address: 0.2.0.0

  * 19 May 14:29:31.627: ISAKMP: (2081):address of 192.168.0.21 assignment

  * 14:29:31.627 May 19: ISAKMP: sending private address: 192.168.0.21

  * 14:29:31.627 May 19: ISAKMP: send the subnet mask: 255.255.255.0

  * 14:29:31.631 May 19: ISAKMP: sending IP4_DNS server address: 192.168.0.1

  * 14:29:31.631 May 19: ISAKMP: sending ADDRESS_EXPIRY seconds left to use the address: 3576

  * 14:29:31.631 May 19: ISAKMP: string APPLICATION_VERSION sending: Cisco IOS software, software C870 (C870-ADVIPSERVICESK9-M), Version 12.4 (15) T7, VERSION of the SOFTWARE (fc3)

  Technical support: http://www.cisco.com/techsupport

  Copyright (c) 1986-2008 by Cisco Systems, Inc.

  Updated Friday 14 August 08 07:43 by prod_rel_team

  * 14:29:31.631 May 19: ISAKMP: split shipment include the name Protocol 120 network 0.0.0.0 mask 0.0.0.0 0 src port 0, port 0 DST

  * 14:29:31.631 May 19: ISAKMP: sending save the password answer value 0

  * 19 May 14:29:31.631: ISAKMP: (2081): respond to peer 151.38.197.143 config. ID =-851463821

  * 19 May 14:29:31.631: ISAKMP: (2081): lot of 151.38.197.143 sending my_port 500 peer_port 500 (R) CONF_ADDR

  * 14:29:31.631 May 19: ISAKMP: (2081): sending a packet IPv4 IKE.

  * 14:29:31.631 May 19: ISAKMP: (2081): node-851463821 error suppression FALSE reason "error no.".

  * 14:29:31.631 May 19: ISAKMP: (2081): talking to a customer of the unit

  * 14:29:31.631 May 19: ISAKMP: (2081): entry = IKE_MESG_FROM_AAA, IKE_AAA_GROUP_ATTR

  * 14:29:31.631 May 19: ISAKMP: (2081): former State = new State IKE_CONFIG_AUTHOR_AAA_AWAIT = IKE_P1_COMPLETE

  * 14:29:31.635 May 19: ISAKMP: (2081): entry = IKE_MESG_INTERNAL, IKE_PHASE1_COMPLETE

  * 14:29:31.635 May 19: ISAKMP: (2081): former State = new State IKE_P1_COMPLETE = IKE_P1_COMPLETE

  Here the Iphone remains unused for a few seconds...

  * 14:29:48.391 May 19: ISAKMP (0:2081): received 151.38.197.143 packet 500 Global 500 (R) sport dport QM_IDLE

  * 14:29:48.391 May 19: ISAKMP: node set 1834509506 to QM_IDLE

  * 19 May 14:29:48.391: ISAKMP: (2081): HASH payload processing. Message ID = 1834509506

  * 19 May 14:29:48.391: ISAKMP: (2081): treatment of payload to DELETE. Message ID = 1834509506

  * 14:29:48.391 May 19: ISAKMP: (2081): peer does not paranoid KeepAlive.

  * 14:29:48.395 May 19: ISAKMP: (2081): peer does not paranoid KeepAlive.

  * 14:29:48.395 May 19: ISAKMP: (2081): removal of HIS right State 'No reason' (R) QM_IDLE (post 151.38.197.143)

  * 14:29:48.395 May 19: ISAKMP: (2081): error suppression node 1834509506 FALSE reason 'informational (en) State 1.

  * 19 May 14:29:48.395: IPSEC (key_engine): had an event of the queue with 1 KMI message (s)

  * 19 May 14:29:48.395: IPSEC (key_engine_delete_sas): rec would notify of ISAKMP

  * 19 May 14:29:48.395: IPSEC (key_engine_delete_sas): remove all SAs shared with peer 151.38.197.143

  * 14:29:48.395 May 19: ISAKMP: node set-1711408233 to QM_IDLE

  * 19 May 14:29:48.395: ISAKMP: (2081): lot of 151.38.197.143 sending my_port 500 peer_port 500 (R) QM_IDLE

  * 14:29:48.395 May 19: ISAKMP: (2081): sending a packet IPv4 IKE.

  * 14:29:48.399 May 19: ISAKMP: (2081): purge the node-1711408233

  * 14:29:48.399 May 19: ISAKMP: (2081): entry = IKE_MESG_INTERNAL, IKE_PHASE1_DEL

  * 14:29:48.399 May 19: ISAKMP: (2081): former State = new State IKE_P1_COMPLETE = IKE_DEST_SA

  * 14:29:48.399 May 19: ISAKMP: (2081): removal of HIS right State 'No reason' (R) QM_IDLE (post 151.38.197.143)

  * 14:29:48.399 May 19: ISAKMP: (0): cannot decrement IKE Call Admission Control incoming_active stat because he's already 0.

  * 14:29:48.399 May 19: ISAKMP (0:2081): return address 192.168.0.21 to pool

  * 14:29:48.399 May 19: ISAKMP: Unlocking counterpart struct 0 x 84084990 for isadb_mark_sa_deleted(), count 0

  * 14:29:48.399 May 19: ISAKMP: return address 192.168.0.21 to pool

  * 14:29:48.399 May 19: ISAKMP: delete peer node by peer_reap for 151.38.197.143: 84084990

  * 14:29:48.399 May 19: ISAKMP: return address 192.168.0.21 to pool

  * 14:29:48.403 May 19: ISAKMP: (2081): node-1427983983 error suppression FALSE reason 'IKE deleted.

  * 14:29:48.403 May 19: ISAKMP: (2081): error suppression node 1322685842 FALSE reason 'IKE deleted.

  * 14:29:48.403 May 19: ISAKMP: (2081): node-851463821 error suppression FALSE reason 'IKE deleted.

  * 14:29:48.403 May 19: ISAKMP: (2081): error suppression node 1834509506 FALSE reason 'IKE deleted.

  * 14:29:48.403 May 19: ISAKMP: (2081): entry = IKE_MESG_FROM_PEER, IKE_MM_EXCH

  * 14:29:48.403 May 19: ISAKMP: (2081): former State = new State IKE_DEST_SA = IKE_DEST_SA

  * 19 May 14:29:48.403: IPSEC (key_engine): had an event of the queue with 1 KMI message (s)

  It seems 877 comes even to assign a local ip address of LAN for Iphone (192.168.0.21) but then something goes wrong...

  Any idea or suggestion on this?

  Thank you very much

  Hi Federico,.

  Please let us know.

  Please mark this message as answered while others will be able to learn the lessons.

  Thank you.

  Portu.

• UCS C220 M3 custom problem after installing ESXi 5.1.0 Cisco

  Hello world

  I m using a Cisco UCS C220 M3 when I tried to install ESXi 5.1.0 custom Cisco after complete the entire process and restart the server. The ESXi has not started it appeared as if there is no operating system.

  In addition, before installing ESXi I configured a HDD in RAID 0, initialized the RAMDisk and chosen as a pilot.

  Hoping someone could help me.

  Llianovich,

  Unfortunately, the on-board controller is not supported with ESXi.  I saw other people using this controller for VMware and makes the work but the behavior is very random and it could work or fail at any time. It is recommended to use one of the controllers of basic PCI or Mezzanine by the ESXi (see c220 m3 datasheet below)

  STEP4SELECT CONFIGURATION of RAID (page 21)

  http://www.Cisco.com/en/us/prod/collateral/ps10265/ps10493/C220M3_SFF_SpecSheet.PDF

  Embedded MegaRAID controller

  http://www.Cisco.com/en/us/docs/unified_computing/UCS/c/HW/C220/install/RAID.html#wp1028426

  

• ESXi 6.0 Cisco ISO Custom

  When Cisco going to ESXi ISO custom 6.0?  The 5.5 Update 2 ISO is there. I looked on the VMware site

  https://my.VMware.com/Web/VMware/details?downloadGroup=ESXI600&ProductID=491&rPId=7929#custom_iso

  and I do not see listed Cisco.   HP released 3/30, 4/6, NEC Hitachi 4/12 there.

  Just FYI: it is now available, see

  https://my.VMware.com/Web/VMware/details?downloadGroup=OEM-ESXI60GA-Cisco&ProductID=491

  At soon Walter.