How Essbase treats nets of the CPU?

Similar Questions

• ESXI4.1 has how often is DRS control the CPU usage?

  ESXI4.1 has how often is DRS controls the use of the CPU on the host?

  I have 16 ESX host. Some of the hosts reach very hight CPU use, up to 98%, although some are as low as 52%. I understand DRS moves virtual machines only when you have to. I wonder how often it checks. Is there a set period of time, or DRS works in real time to check the hosts. Virtual machines are finally left guests busy, although guests were constantly busy today, about 90% + CPU, while some have been systematically 50%.

  On the 16 hosts, we have configured 1 host failover capability and the current capacity of 11 host failover. Affinity rules apply only to a limited number of virtual machines (about 6) of about 300.

  By default DRS is called every 300 seconds.

  Best regards, Robert

• How to check the CPU usage and paging using LabVIEW

  Hi guys,.

  I build an application that is used to check the CPU usage and paging using LabVIEW. How can I do?

  any help, suggestions or advice will be greatly appreciated...

  Kind regards

  Prashant

  Hello

  If you plan to build your app for Windows, you can use .NET classes. (System.PerformanceCounter), there is a simple example with LabVIEW:

  C:\Program NIUninstaller Instruments\LabVIEW 2010\examples\comm\dotnet\SimpleTaskMonitor.llb

  

  Also, you have several screws that you can use to verify information about the processor.

  

  Kind regards

• How to replace the CPU on satellite A110-252

  I have a satellite A110-252 and need to know how to replace the cpu, hope someone can help you.

  Doug

  First of all there if the new processor would be compatible with the BIOS.
  Second, you should know that a plu CPU produce more heat and this would lead to overheating.
  Are you sure that your laptop would deal with the new CPU?
  I don t think so

  In any case, I found this page:
  http://www.irisvista.com/tech/

  There may be some useful pic and instructions for you

  But once again; If I was you, I wouldn't try it.

• Qosmio F20-136: how to check the temperature of the CPU?

  someone knows how can I check what temperature turns or a program that will tell me and also is it possible to adjust fan settings?

  I have a Qosmio F20-136

  Hello

  You can find in the management tool of power under the method of cooling setting of the cooling fan.
  Try to set it to the lower level. I know that cooling fan is sometimes too loud, but you must know that you have high technology with powerful hardware components unit. Material is placed on the square and must be properly cooled to avoid damage.

  I really put t whether a tool can show you the temperature of the CPU. Check in the advanced search if you can find a similar topic. Long ago, I read the discussion on this subject.

  Good bye

• Z220: The CPU utilization high idling: how to troubleshoot?

  My new Z220 with i5-3470 CPU, 16 GB RAM, Win 7 Pro 64-bit, shows a very high utilization of the processor idling: 35 to 39%, on average. I looked at the Win 7 performance monitor and there it shows system interrupts, in slow motion, a lot of 20-25% the use of the CPU, the system consumes 10 to 15%.

  A quick glance at a similar setup Z210 idling watch zero % CPU for the two system using interrupts and system.

  The Windows performance tool is not one I have a lot of experience with usage, but a few reports I generated show nothing obvious, at least not for me.

  Does anyone have advice about how to fix this?

  TIA!

  After a really long survey on Windows 7 drivers and others, HP advanced support Tech became convinced (as I pretty much was all the long...) that there actually is a hardware in-game problem: motherboard or the CPU. First level never support could go to the beyond notice of driver/Win 7 / background process 'normal', which I became finally found was not the case.

  The excellent technician sent by HP thought the CPU was a good place to start: it replaces, and as soon as voltage, all high utilization of the processor issues disappeared! I've been running the system for some hours, after reinstalling my extra system memory and card over-pants V4900 and the CPU is idle to 0-1 percent, with System Idle Process typically in 98-99 percent. Idling system interruptions now consume less than 1% of the CPU usage. Why this processor (i5-3470) spent all of diagnostics from Intel without a blip is a mystery to me.

  Thus, solved! And congratulations for the HP business support!

• How to get the CPU usage in LabWindows using C program

  Hi all

  Please help me...

  How to get the CPU usage and the use of the RAM in LabWindows CVI 12.0 using C.

  Any help with this will be appreciated.

  Thank you in advance

  
  

• How to find the CPU Microcode Patch review?

  G ' Day,.

  According to the next VMware KB:

  KB.VMware.com/.../Search.do

  Revision of the CPU Microcode Patch must be updated to version. Does anyone know how to find the Model CPUID (Stepping) installed processors and Microcode patch review there?

  R630 host running ESXi 5.5.

  BIOS version 2.1.5.

  Kind regards

  Alex.

  Dell has just released new bios for FC630, R630 that updates the firmware

• How to check the CPU usage in the database

  How to check the CPU usage?

  in Linux and database level

  Hello

  under Linux, you can use mpstat command, for example:

  [oracle@vSLLGM132 ~] $ mpstat Pei ALL 2 10
  Linux 2.6.32 - 300.10.1.el5uek (vSLLGM132) 23.11.2014

  14:27:08 CPU user nice sys % iowait % irq % sweet % fly % idle intr/s
  14:27:10 all 1.00 8.50 9.00 0.00 0.00 0.50 0.00 1423,50 81.00
  14:27:10 0 1.00 8.50 9.00 0.00 0.00 0.50 0.00 81.00 26.50

  CPU utilization tracking can be done with the command SAR u.
  .

  At the database level: data dictionary views: v$ sysstat, v$ iostat, V$ SYSMETRIC_HISTORY.

  Read the MOS Notes:

  Diagnose hardware base caused by Performance issues (Doc ID 148176.1)

  Troubleshooting: The use of high processor (Doc ID 164768.1)

  Concerning

  Borys

• How to get the cpu host machine virtual mhz by PowerCLI

  How to get the cpu host machine virtual mhz by PowerCLI

  Thank you

  

  The following command of PowerCLI will list the maximum cpu MHz for all of your virtual machines from the host:

  Get - VM | Select-Object - property Name,@{Name='MaxHostCpuMhz'; Expression = {$_.} NumCpu * $_. VMHost.CpuTotalMhz / $_. VMHost.NumCpu}}

• How to calculate the CPU Ready on Cluster DRS via Powercli?

  Hi all!

  I have a DRS Vsphere cluster. I want to know what is the value of the loan of CPU I have in my group.

  For example, I get 20% of powercli value, it is normal for the cluster, but if I have 100% or more, I have a problem.

  How to achieve via Powercli? And how to calculate the percentage values correctly?

  I know, I can get all values of CPU Ready of VMs cluster, but IT is not the same thing, I need overall value of CPU Ready.

  Thanks in advance!

  As far as I know you can get the cpu.ready.summation for ESXi nodes or VMs.

  For a cluster, you will need to get the value of each node in the cluster ESXi and then take the average.

  The metric cpu.radey.summation is expressed in milliseconds.

  To get a percentage, you need to calculate the percentage of loan period during the interval during which it was measured.

  Something like this (this will give the loan current %)

  $clusterName = "mycluster.

  $stat = "cpu.ready.summation".

  $esx = get-Cluster-name $clusterName | Get-VMHost

  $stats = get-Stat-entity $esx - Stat $stat - Realtime - MaxSamples 1 - forum «»

  $readyAvg = $stats | Measure-object-property - average value. Select - ExpandProperty average

  $readyPerc = $readyAvg / ($stats [0].) IntervalSecs * 1000)

  Write-Output "Cluster $($clusterName) - CPU % loan $(' {0:p}'-f $readyPerc).

• How not to create a partition on an essbase server without using the domain name and the port using the MXL script?

  Hi guys,.

  We know that we can create partitions on the SERVER NAME, SERVER. AREA: PORT only and ESSBASECLUSTERN founded through the Regional service CONSOLE.

  Now my question is how to do the same to CREATE or REPLACE the PARTITION script.   By default, it's get created using SERVER. AREA: PORT only.

  Here is my script that I use to create a partion.

  CREATE or REPLACE REPLICATE one PARTITION "xxxx". "' xxxx ' AREA 'xxxxxxxx' SOURCEAREA to 'xxxx '. "' XXXX ' to 'WZ00339D' AS 'xxxxx' IDENTIFIED BY 'xxxxxxx' AREA"xxxxxx ";

  
  

  Where WZ00339D is my name of essbase server.

  
  

  Put it in the script is the following.

  WARNING - 1023052 - Partition [WZ00339D:1423 Bullseye Sales] is not valid.

  But the partition is created on essbase app - database with the SERVER. AREA: port only.

  Partition part of orphaned partitions as am I try to open the partition under the name of the SERVER not only through the SERVER. Average Doman:port.

  Partition be created under title

  [WZ00339D.DOMAIN.com:1423.App.DB]-> [WZ00339D.DOMAIN.com:1423.App.DB]

  FYI, the user id used as logins are created by using domain - they are not native users.

  Please let me know how I have to have the syntax so that I can create a partition just as I help Regional service on the name of the SERVER console only.

  Let me know I can provide more information, the entire reason to use a script to create a partition is to refresh the score by a fall and create a partition.

  Roman

  I solved this problem.

  Its very simple all my code and approach was right.

  Everything I did wrong is an active directory account to create the partition and check used a native account on EAS. If you log in with the account active directory - the partition is under the name of SERVER only.

• How to calculate the cpu in the resource pool

  How to calculate the cpu in the resource pool

  and don't forget that shares in pools of resources are not inherited by the virtual machines in the pools. the action is related to the pool itself.

• How to set up notification by e-mail to the CPU usage complete on OEM12c?

  I found a Doc Oracle, the way that e-mail notifications are configured? How can I check that after setting the notifications?
  
  4.1.2.3 to subscribe to receive e-mail for the Incident rules
  
  An incident rule is a rule defined by the user that specifies the criteria by which the notice should be sent for specific events that make up the incident. A set of collateral rules, as its name suggests, consists of one or more rules associated with the same incident.
  
  When you create an incident rule, you specify criteria such as targets that you are interested in, the types of events you want that the rule applies to. More precisely, for a given rule, you can specify the criteria that you are interested in and the methods of notification (such as email) to be used for sending these notifications. For example, you can set up a rule that when a database crashes or any database backup job fails, e-mail should be sent and "disruption log" notification method must be called. Or you can set another rule that when the CPU or memory of any host using reach the critical severities, SNMP traps to be sent to another management console. Flexibility of notification is reinforced by the fact that with a single rule, you can perform multiple actions depending on specific conditions. Example: When a condition of monitoring such as machine use of memory, for an incident severity of 'warning' (to 80% memory usage), send an e-mail message to administrator if gravity is "critical" (99% memory usage), the administrator of the page immediately.
  
  You can subscribe to a rule you have already created.
  
  In the configuration menu, select cases, and then select rules of the Incident.
  
  On the rules of the Incident - all company page rules, click the rule set containing rule climbing incidents in question and click on change... Rules are created as part of a set of rules.
  
  Note: where there is no set of existing rules, create a rule set by clicking Create Rule Set... Then, you create the rule in the context of the creation of the rule set.
  
  In the section the page rules change a game rule, select the rule of climbing and click on change...
  Go to the Add Actions page.
  Select the action that intensifies the incident and click on change...
  
  http://docs.Oracle.com/CD/E24628_01/ doc.121 /e24473/notification.htm#CACHDCAD

  Make sure that you have the correct thresholds...

  target home > monitoring > "metrics and parameters in the Collection.

  Check the status of incident for warning events and criticism for the targets of the host

  Setup > Incident > Incident rules

• How to evaluate the impact of the removal of the CPU?

  One of my clients must remove three (of four) CPU in order to respect the license agreement with Oracle.
  
  To avoid problems and also for any problems remove the CPU can bring the list, I want to do a study on the possible impacts, especially in the performances, which can cause the removal.
  
  How can I get this information?

  >
  I really want to do all the tests and get concrete data on what is the real impact. The customer uses about 20% of his salary (cpu + cpu wait) but I know that this does not mean that it can simply cut their treatment at 25% safely.

  Yes, my client has a test environment, but does not have a database of the replay, so it is not possible to perform tests on the workload precisely.

  How can I test without this tool, or at least the collection of data that will give me more specific that CWA information? It should open a SR on MOS?
  >
  There is nothing to open an SR for.

  The type of system change, you're talking about can only be tested on a system that best matches the production system. It has too many interactions between the CPU, memory, cache and external (disk) storage systems to be able to use a system of unpaired test and extrapolate the results.

  You will have to do equivalent performance in order to obtain meaningful results, but these tests should be done on similar systems.

  If I were you I would start by contacting your Oracle support person and identify the actual costs to continue to use your system for 4-processor and costs associated with maybe a 2 - cpu system.

  Then I estimated costs of the work in question in any change of your test system to make it as nearly equivalent to the possible production system and add in the costs of running actually load tests and a fudge factor to take account possible downtime or a financial loss due to the degradation of the system if your estimates are erroneous.

  You find it's cheaper and less risky, to pony just upward at least a 2-processor license. Who would buy at least your client enough comfort and time to design a more reliable long term solution.