Ethernet controller & adapter not recognized, even with drivers

Similar Questions

• Satellite A100-998 - need Driver Ethernet controller/adapter

  Hey,.

  I tried to set up a home network, but discovered that my Toshiba Satellite A100-998 (PSAA9E) doesn't have an Ethernet controller/adapter driver!
  I looked on the Toshiba download area but I don't know how to install the LAN drivers, also I reinstall XP with recovery of product, but without success CD!

  Please can someone help, its quite Important! = D

  Kind regards
  Alex

  On the European driver Toshiba page, you will find the Realtek Lan driver and driver Intel Lan.
  If Realtek doesn t work, then you need the Intel Lan driver.

  Is it so difficult?

• Ethernet controller does not work on the Satellite L645D-S4030

  Basically, I got my windows 7 reinstalled on my laptop due to virus... Now I have a problem with the Ethernet controller does not, I checked my device manager and there is a kind of yellow dash through the icon... Someone knows what is the problem and how can I solve this problem?

  BTW, I have a SATELLITE L645D-S4030

  Hey Buddy,

  Hmm generally if you reinstall Toshiba Recovery disk Windows all drivers will be installed too because the disc contains a picture of the factory settings.
  Or you used another drive?

  Yellow exclamation mark can mean that there is a driver problem and so it would be advisable to reinstall the LAN driver. Follow the link Timox. After the driver is installed, restart your computer and check again in Device Manager. The yellow exclamation point should normally be gone.

• Satellite Pro A10: Ethernet controller is not installed

  I reinstalled windows xp on my laptop, but the ethernet controller does not appear to be installed to a shortage of pilots. I searched the download section and it doesn't seem to be any available for download A10 ethernet controller drivers.

  Someone help please?

  Hello

  First Ethernet controller is the same as a LAN = controller you need a LAN driver or / and more driver WLan.
  Visit the page of the Toshiba driver and you will find the necessary drivers.

  PS: I checked this site and have found these drivers.

• Satellite M100 - Ethernet controller is not installed

  Satellite M100 ethernet controller is not installed.
  While I downloaded all the fron driver this site and installed.

  The location of the device is on the bus PCI, Unit 8
  The 28 iic error code.

  The problem he 3 drivers is provided by this page European driver of Toshiba Satellite M100 series!

  Please choose the right and install the LAN driver because the Ethernet controller seems to be the LAN (maybe a WLan too)

  Good bye

• What are the causes of media error does not exist, even with the inserted disc

  I have a video project of 2 h I want to put on a DVD in NTSC format.  I get a msg of error 'Media does not exist', even with the DVD inserted in the drive.  I checked "Fit content to the space available.  Is the hr project 2 too long to compress the DVD, or are there other possible causes?  I have made a project of 1 1/2 hours without any problem.  I have a lot of hard disk space.

  Download orders

  What version of Premiere Elements and on what operating system works - it?

  The problem is the disc in the tray of the burner not recognised by Premiere Elements. Another frequent related issue is location of burner: burn dialog is empty when the Premiere Elements does not recognize the burner.

  In the problem that you have.

  have a. you tried other brands/types of DVD discs?

  b. If you start a new project and take the new timeline content DVD-video to DVD disc, the problem remains the same?

  B. have you tried to uninstall / free program ccleaner cross / reinstall with antivirus and firewall disabled?

  If you are in a time crunch, you should consider burning the chronology contained in the record and then taking the the VIDEO_TS folder

  recorded in a program like ImgBurn for DVD-VIDEO on DVD production.

  Please check and review and then provide you with the way to details. Looking forward to your results.

  Thank you.

  RTA

• Network controller is not recognized on Satellite A100 Windows XP

  Hi all!

  I bought a Satellite A100 PSAAR and I did a clean install of Windows XP on it. I installed all the drivers in the correct order (downloaded from the support page) but I still have a problem:

  Ethernet controller and network controller appear with a yellow exclamation point in Device Manager, and they are not recognized. I have downloaded the driver lan and I managed to do recognize the ethernet controller. However no matter how hard I tried, I can't find the correct driver for the NETWORK CONTROLLER, which still appears in Device Manager in yellow color.

  I really could use any help here... Thank you in advance.

  Hello

  Shouldn´t be a big problem to get some drivers for your machine's real lan. Just go here:

  http://www.Intel.com

  and download the intel proset for ethernet controller. If you didn t already installed the wireless card, do so. Otherwise the other network controller could be the bluetooth adapter.

  It would be nice to hear from you...

  See you soon

• Ethernet controller - driver not installed - Compaq Presario

  Hello, I'm new here so be gentle

  I just bought second hand a Compaq Presario 6240EA, motherboard is a Compaq 07D0h.

  In the hardware - device manager, it says "Other devices" - Ethernet controller, with a big yellow question mark and an exclamation point.

  Details in the properties indicates the following: drivers for this device are not installed (Code 28)

  PCI\VEN_10DE & DEV_01C3 & SUBSYS_00A80E11 & REV_C2\3 & 13C0B0C5 & 0 & 20

  I find the HP and Compaq sites for driver downloads and downloaded all of the nVidia drivers available on the Compaq site, including any improvement in the situation.

  Is there somewhere else to look at, I'm at my wits end with this, any help would be appreciated.

  Thank you in advance.

  Hello CherylG

  Thank you, it worked, thank you very much for your help.

  I guess the answer was there, I just don't see it, I thank you once again.

  Take care

• Dynex DX-BUSB Wireless Adapter not recognized

  I can't get my Dynex DX-BUSB wireless network adapter is recognized by Windows 7.  Windows recognizes it as a 802. 11 b / g adapter LP/SC of USBeless, but is unable to install the drivers.  I tried to install the original Dynex drivers, but it recognized without luck.  I guess because its pilots are old and currently not supported, looks like.  This computer, only way to get on Internet wireless adapter, I can't search online for drivers on this subject through Windows Update.  What should I do to get this card to work.  FYI, I'm using Windows 7 64 bit on a Pentium D 2.8 Ghz.

  Hey Wackysoft,.

  I had the same problem this week and spent some time on the phone with Dynex.  They openly admitted that the DX-BUSB (as well as most of their other products) are currently problems of incompatibility with Windows 7.  They said they hope to have drivers available in the coming weeks.  Pretty miserable for those of us who do today on the internet.

  Good luck.

• HP Compaq d220 format microtour Desktop PC Ethernet Controller does not work?

  Hi, I just reinstalled my microtour HP Compaq d220 with Windows Xp Professional desktop PC and I downloaded the chipset in the system first and then audio driver and the driver of network here: http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=12...

  I went into Device Manager but my ethernet controller was still in others? My internet was not working and I can't access my router? I don't what to do. I lost all my Sunday looking for answers. Can someone help me out here?

  Message edited by foos-special on 22/11/2009 23:23

  Hello.

  Today, I had this same problem with a d220 MT (in fact, I found this entry when you seek a solution ), and the fix was so simple it was embarrassing. The driver download sp25326.exe install just the installer. After you run it, you must go to c:\swsetup\sp25326 and run setup.exe. After that, your card should work. at least it worked for me.

  I hope this helps.

• USB not recognized - even when there is no device at all (Windows 7, Pavilion dv7)

  For a few days now, I get the message

  "USB device not recognized: one of the USB devices attached to this computer is not working properly." The device has not been recognised "."

  He keeps popping up in my right corner below, every 5 seconds if I don't click it. When I click on the message, I get a list of devices (ports) are available. There is an "unknown device". Maybe it has something to do with the (biometric) finger scan? This has not worked very well lately...

  Even when there is no single USB device installed (normally, I have a mouse and a Targus laptop cooling mat installed as USB devices), it keeps popping up. I tried to remove the USB port from the list (or uninstall) in the remote control, but it seems that it keeps happening.

  I got it all of a sudden, I have nothing specific to has not logged any strange devices (except for a spotlight on exit external screen, but this has nothing to do with USB). I also hear the sound for the connection / disconnection USB devics randomly when I'm on my laptop.

  Someone has an idea?

  Thank you

  HP Pavilion dv7 Notebook PC
  LE902EA #UUG

  Windows 7 64 bit

  The solution can be found here

• USB not recognized - even when there is no USB devices at all the

  For a few days now, I get the message

  "USB device not recognized: one of the USB devices attached to this computer is not working properly." The device has not been recognised "."

  He keeps popping up in my right corner below, every 5 seconds if I don't click it. When I click on the message, I get a list of devices (ports) are available. There is an "unknown device". Maybe it has something to do with the (biometric) finger scan? This has not worked very well lately...

  Even when there is no single USB device installed (normally, I have a mouse and a Targus laptop cooling mat installed as USB devices), it keeps popping up. I tried to remove the USB port from the list (or uninstall) in the remote control, but it seems that it keeps happening.

  I got it all of a sudden, I have nothing specific to has not logged any strange devices (except for a spotlight on exit external screen, but this has nothing to do with USB). I also hear the sound for the connection / disconnection USB devics randomly when I'm on my laptop.

  Someone has an idea?

  Thank you

  HP Pavilion dv7 Notebook PC
  LE902EA #UUG

  Windows 7 64 bit

  I have disabled the root hubs, figured out that we caused now my mouse and other USB physical led to no longer working and that was allowed again.

  The one who gave the error message is now disabled and if the error message is no longer present.

  Result: (built in) cyberlink youcam and biometric no longer work. But at least the annoying message disappeared, so I guess I can live with that.

• Wusb300n adapter not recognized by the USB port

  Cannot get WUSB300N adater to install on XP Pro SP3. The problem is with the USB port in recongised in the Design Manager. It appears as a "unknown USB currency" as a USB controller and not as a legacy of network. A Linksys support remote control my PC but not able to get to install connectly. Tried all the USB ports. Tried to install Design Manager.The motto is fine recongised by my other Vista PC. ? Is there a problem with my USB ports? Card mother MSI KT3 Ultra-ARU , I think that the USB is 1.1 not 2.0 but it is within the specification of Linksys for the WUSB300N. Install a new PCI USB2.0 card will it heal? Comments please. (I know the MSI motherboard is old, but is simply a 2nd bedroom based PC)

  Resolved issues. New USB 2.0 card and drivers installed. It will not work with USB1.1 or it would ' t for me. The sheet he says OK with

  IEEE 802 standards project. 11 b, IEEE 802. 11 g, IEEE 802.11n, USB

  1.1, USB 2.0

  Ports USB Port

  It works with USB 2.0 but not USB 1.1

• USB stick not recognized even on other computers

  Hey-

  A few days ago I plugged in (USB) flash drive of 512 MB on my desktop Dell (Windows Vista), and that bubble "USB device not recognized" come at the bottom of my screen. I tried to put in the other USB ports, ports on different computers and the same message appeared. This device seems not more in Device Manager (do not even like a disc without a name). This worked perfectly well before flash player. Is there a formatting problem that must be corrected in my USB key, or what is the problem?

  Hello

  If the drive is not recognized at all then you cannot format it no more. Disks wear and/or
  go wrong. Most manufacturers of Thumbdrive have Support FAQ, which 'could' help.

  How to format the USB drive and memory with NTFS
  http://www.online-tech-tips.com/computer-tips/format-USB-NTFS/

  Format a Flash DRIVE with the NTFS file system
  http://www.pctipsbox.com/format-a-USB-drive-with-NTFS-file-system/

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Secondary monitor not recognized - problem with Windows 7.0?

  Hello
  I am running Windows 7.0 on my system. I have connected a secondary monitor, but this additional monitor is not recognized. Could someone suggest something that can be done to remedy this?
  Thanks for your time,
  Jaymanika.

  Make sure that your graphics card drivers are up to date.  In the case of ATI, use later.  In the case of nVidia, archived version 182 has proved to have the most success with the people here.