write on the worksheet with formatting

Similar Questions

• Waveforms of writing to the worksheet to help to write on the worksheet vi

  Hello

  Problems with writing 2 waveforms of the myDAQ to a worksheet. Using the "write on the worksheet vi.' does not work as it records in the file, but when you open the file to look at the results, there is no data." I got a screenshot of used vi, unfortunately the file as an attachment could not be validated. Someone sees the problem and no solution?

  http://i50.Tinypic.com/2isil8w.jpg

  Thank you

  You need to do a little basic troubleshooting. Make a right-click on the son goes into the loop, and selection "probe". After you run the VI, the content of the probe and see if there is no data there. I had to put a delay in the loop of the acquisition or specify a number of samples to get the data in a consistent manner.

• list box given to the .csv file using write on the worksheet File.vi

  Hi, I use the write on the worksheet File.vi to write data multicolumn ListBox to the .csv file. If I do record from Excel, the pop-up window shows as an attachment. And data listbox are too different.  I want the data displayed in the first line not the second row (third photo).

  Thank you for your help.

  Before making your Save As in Excel, change the cell formatting of number. This should avoid the scientific notation conversion before you re-register.

  Or just use Notepad to display the file instead of Excel.

• How to get all the style of paragraphs and their policies of an indesign file and write all the info with info para in a txt file with scripts

  @

  How to get everyone how to get all the style of paragraphs and their policies of an indesign file and write all the info with info para in a txt file with scriptingstyle and their policies of an indesign file and write all the info with info para in a txt file with scripts

  Hello

  Try this,

  var doc = app.activeDocument,
      pstyles = doc.allParagraphStyles,
      report = "";
  for(var i =0;i
  Kind regards
  Cognet
  		   

• Write on the worksheet while loop problem

  Hello dear Labviewers. I have a 'writing on spreadsheet"with a table 2D DBL connected on it, but the problem occurs inside the while loop. I want exactly those time six values in my excel document, but it restarts after every "two seconds" and I cannot get rid of this problem. I want exactly the same numbers in the Excel document as it is in the table.

  I tried to move the two "write to the spreadsheet' boxes outside the while loop, but the Excel document does not display a single value in the table, when I do this. It shows that the two headers

  My second problem is rounded off on the numbers. Even if I wrote "%.6f" in the part of the format, it gives me a single decimal value.

  Thanks in advance

  Orlando

  

  Orlando says:

  Thanks for the help Ravensfan

  But the "worksheet to write" not a not an output port, then how can I do this?

  I downloaded my VI

  I never said anything about writing about a spreadsheet file with an output port.

  See the attached VI for changes.  It's only the new data of this iteration of the loop that will write it on the spreadsheet file VI, not made all of the table from all iterations.  There is an entry of table 1 d to the spreadsheet file.

• Problem reading the worksheet after you use a DLL to write on the worksheet

  Hello

  I have a few problems reading a sheet DLL created in LabVIEW. The DLL is written in C++.

  I'll dexcribe what do the VI in the screenshots:

  For DLL_INIT = the first false steps the VI (LabVIEW) values and exports in a DLL initialization.
  DLL takes these values and not some und calculation, then wrote the measured values and the new calculated values in a csv file called 'filtered_values' and a file 'filtered_values_complete '.
  so, I have two files like this after initialization:

  1.0000000000; 1.0000000000; 18.8991610737; -3.2940000000; 0.0060000000; 0.9000000000; 6.5806287097; -3.2940000000; 1.0000000000; 0.0000000000; 1.0000000000; 0.0000000000;

  So now on DLL_INIT = true.
  For the calculation, the next step i read the "filtered_values" - file (LabVIEW), calculate the new values and write in filtered_values (DLL)
  And in the "filtered_values_complete" - file I will allways read the DLL entry first, so that I can check later, if the DLL has obtained the values to the right of the front step and then add the calculated values.

  For i > 0 initialization has been made:
  -the VI bed sheet "filtered_values" calculation and rotted the table 1 d in its unique values
  -The last seven values in the worksheet have been exported in the dll as well as five new measured values.
  -This DLL is still a few calculation
  - then it replaces the "filtered_values" - file and adds a new line to the 'filtered_values_complete '.

  This migth be a bit of confusion, so a small example, afer five steps it loooks like this:

  filtered_values:
  5.0625000000; 1.0000000000; 18.9300200447; -3.2870000000; 9.7320000000; 0.8997597592; 5.9159054233; -2.6533532901; 1.0000000400; 0.0000000000; 0.8078703403; 0.0000000000;

  filtered_values_complete:
  1.0000000000; 1.0000000000; 18.8991610737; -3.2940000000; 0.0060000000; 0.9000000000; 6.5806287097; -3.2940000000; 1.0000000000; 0.0000000000; 1.0000000000; 0.0000000000;
   
  2.0625000000; 1.0000000000; 18.8330081064; -3.2940000000; 9.7270000000; 0.9000000000; 6.5806287097; -3.2940000000; 1.0000000000; 0.0000000000; 1.0000000000; 0.0000000000;
  2.0625000000; 1.0000000000; 18.8330081064; -3.2940000000; 9.7270000000; 0.8999399568; 6.4077416273; -3.1451829134; 1.0000000100; 0.0000000000; 0.9480589053; 0.0000000000;
   
  3.0625000000; 1.0000000000; 18.7932988441; -3.2870000000; 9.7280000000; 0.8999399568; 6.4077416273; -3.1451829134; 1.0000000100; 0.0000000000; 0.9480589053; 0.0000000000;
  3.0625000000; 1.0000000000; 18.7932988441; -3.2870000000; 9.7280000000; 0.8998799074; 6.2394046705; -2.9768465052; 1.0000000200; 0.0000000000; 0.8988158138; 0.0000000000;
   
  4.0625000000; 1.0000000000; 19.0445703499; -3.2870000000; 9.7320000000; 0.8998799074; 6.2394046705; -2.9768465052; 1.0000000200; 0.0000000000; 0.8988158138; 0.0000000000;
  4.0625000000; 1.0000000000; 19.0445703499; -3.2870000000; 9.7320000000; 0.8998198333; 6.0754981785; -2.8129479844; 1.0000000300; 0.0000000000; 0.8521305805; 0.0000000000;

  5.0625000000; 1.0000000000; 18.9300200447; -3.2870000000; 9.7320000000; 0.8998198333; 6.0754981785; -2.8129479844; 1.0000000300; 0.0000000000; 0.8521305805; 0.0000000000;
  5.0625000000; 1.0000000000; 18.9300200447; -3.2870000000; 9.7320000000; 0.8997597592; 5.9159054233; -2.6533532901; 1.0000000400; 0.0000000000; 0.8078703403; 0.0000000000;

  So it's good enough that the VI and it works fine until some point when the just VI reads more calculation and x = sheet! There? becomes true.

  Most of the time it happens when the csv file is about 1200 lines

  Someone knows why this happens?

  Best regards

  Stefan

  Hello

  understood, that the error occurs somewhere completely else. the thread may be closed

  BR

  Stefan

• Write to the worksheet only if the file name is different

  Hi all

  I'm trying to write some code, but to no avail. Basically I have a file name to each time interval (say 2 seconds). I built a small table for example.

  The names of files in the table are repetitive and I don't want to write the data in the worksheet, if the file name is the same.

  Bascially, I need to write the header and the table for the 1 c:\1.txt files and after c:\1.txt the data (more than 3) I want to only write the table only (no header) and add it to the worksheet.

  That is to say for c:\1.txt file, it will consist of 1 header and 4 sets of table.

  Then the process is repeated again until a newfilename (c:\2.txt) is encountered.

  c:\2.txt will also include 1 header and 4 sets of data.

  Can anyone help on this?

  Your loop is you allowing to read beyond the end of file names in your table. This passes an empty file name write it on the spreadsheet VI which requires to ask the name of the file. You should test this condition.

• Write to the worksheet as 2D gives me zeros?

  I have a chart that I built enter an entry in the spreadsheet, and even if the first column out allright, the following three are only zeros? Would it because they are so few? and if yes how I fix this. Here's my VI

  Pazmush wrote:

  I have a chart that I built enter an entry in the spreadsheet, and even if the first column out allright, the following three are only zeros? Would it because they are so few? and if so How to solve this problem. Here's my VI

  1) press Ctrl + h to open the Help window.

  2) float above the worksheet function writing.

  (3) entry to respect the labled albums "format".

  (4) make a right click on the SS service and choose Help.

  (5) read the explanation on the input format.

  (6) change the format entry by creating a constant and even editing for your needs.

  If the format is not the issue. create a probe for the data and verify that your actual data are. It may just be zero.

  Ben

• Replace the text with formatting

  I need to replace every occurrence of the word with impatience! with forward! in italics. I have not found a way to do... Any ideas?

  Thank you

  JackL

  Captivate 7 - Windows 7

  I have the answer for those who are interested. Captivate (7) lets you export captions and subtitles to Word. Once in Word, simply replace the text sought by the text in the layout you want, save, and then re-import the Captivate projects. Works perfectly, with a caveat. If you use bullets (standard or numbers), the hyphen and the bullet formatting to these legends may require some manual adjustments after importation.

  In any case, this process has saved me a lot, a lot, a lot of hours!

  Jack Loganbill

• write file.vi worksheet with the data of type long

  Sorry my English

  I need to monitor and record data for three hours, power x time.

  I wish that every 1000 dry, a new file would generate and save the part of systems of measurement for three hours.

  is this possible?

  My idea is to have different parts of a single measure, the sets of measurement in theory would not slow down

  OBS: I use to write the file.vi worksheet to record data

  Thank you

  Your code is slow because you're constantly tables.  Whenever you add to a table, a new location of memory needs to be done to contain the table in its entirety.  This becomes very tedious when berries become large.

  Since you are using graphs, simply write the current values in the chart.  Now for the backup of the file, you should only open the file once before the loop and close once after the loop.  Inside, you want to use the string in array to worksheet and functions to write the text file to write data to the file.  It will be much more effective that completely overwrite each loop as you do.

  With these two patches, it is therefore no reason to constantly accumulate your berries.  So those spending records are not needed and get rid of some of these insert into table (which should really be table to build anyway).  Just write the last values anyway.

• Problem with 'Write to the worksheet File.vi' in Labview 8.2

  Hello

  I wrote a vi to reduce the noise of my source of signal (voltage). When I wrote in the spreadsheet file, it saved only 10 rows of data. How can I continue to record the signal until I stop the vi.

  Thanks in advance,

  Michael

  How many samples you take with the DAQ Assistant? Is it ten?

  Please pay attention to the answers. You never want to save more than one iteration until correct you the entry in the spreadsheet file.

  Post your VI if you still have questions after the fixing of the VI.

• How to write a large amount of measurement with the function 'Write to the worksheet' results in an Excel file?

  I'm going to measure more than 100,000 SAMPL and I write in a document. I would use Excel to present much more easy, but the problem here is that excel can have only 60 000 samples. also use text file is not the desired one.

  you have a solution that helps me?

  Excel 2007 gives you 1 M lines. Can update you your version of Excel?

• How can I view the text with format and < object >... < embed > video?

  Hi, OTN.
  I can't find a suitable component to show a ViewObject CLOB with video (streaming flash videoplayer) HTML format and < object > < embed > tags.
  With components output format or Rich Text Editor, I don't see the embedded objects or their HTML tags. Only simple HTML format.
  
  How to display an embedded object (video) on the JSF page with #{binding} on the ViewObject data control?
  
  Thank you.

  Try and af:outputText with the exhaust attribute set to false.

• write on the worksheet

  Hello

  I am able to write my values to the spreadsheet, but I wanted the labels to be saved as well as the values.

  I also want each value to draw in a Microsoft graph chart.

  Pls Guide

  Try this:

• write on the worksheet help

  Hello, I am trying to use write in file.vi of the spreadsheet to store my energy measurement data to an excel file. When I open the file once it records the data that comes out now instead in a column that will make my life a lot easier. I also tried to put the register shift on this loop for, it will save the data in the file of all the measures instead of only new data reset, but it gives me errors on the connection of two different types of data. Any help will be greatly appreciated.

  I do not see the shift registers in your program, so I don't know about this problem.

  But maybe you want to connect a real to adding data? so it's not overwrite the old data entry?