EtreCheck has no file not found

Similar Questions

• Lsass.exe - Unable to locate component. This application has failed to start because the oleaut32.dll file not found

  Original title: oleaut32.dll xp

  My system XP pro/sp3 does not start normally, without danger or with the original sys disk. I get a message
  Isass.exe - Unable to locate component. This application has failed to start because the oleaut32.dll file not found. reinstalling the application may fix this problem.
  However, I can't in the operating system to do a re-install.
  Any suggestions?

  If c:\windows\system32\oleaut32.dll is missing, you will see messages like this:

  Lsass.exe - Unable to locate component
  This application has failed to start because the OLEAUT32.dll file not found.  Reinstalling the application may fix this problem.

  If the missing file is the only problem, you might have to do a reinstall to fix.

  There should be a copy of Oleaut32.dll in the c:\windows\system32\dllcache folder, so if you can get in the XP Recovery Console, you can just replace it - then you are going to have to start on something to do.

  Once started in the XP Recovery Console, you must enter this command at the prompt:

  Copy c:\windows\system32\dllcache\oleaut32.dll c:\windows\system32

  If the file is not in the dllcache folder (it should really be), depending on your installation, this command can work:

  Copy c:\windows\servicepackfiles\i386\oleaut32.dll c:\windows\system32

  Answered in the affirmative if invited to replace any existing file.

  I don't know what the Microsoft Support Engineer think that KB307545 or KB922371 will help you.  I think that the MSE is just throw a few things to try and some links.  You don't describe symptoms consistent with the need to use one of these methods.   I would say the MSE has never seen this problem before, made no attempt to reproduce the problem, and has no idea how to fix this.

  If your CD does not start in the Recovery Console, or if you don't know what kind of CD do you have to do a CD of XP Recovery Console and boot on it (no media XP required).

  Here's how:

  Boot into the Recovery Console Windows using an XP bootable installation CD.

  If you have no XP bootable media (or aren't sure you have) create a bootable XP Recovery CD of Console and do not forget.

  This is not the same as recovery disks that might have come with the acquisition of the system store.

  You can make a bootable Recovery Console CD by downloading an ISO file and burn it to a CD.

  The ISO bootable image file you need to download is called:

  xp_rec_con. ISO

  Download the ISO from here:

  http://www.mediafire.com/?ueyyzfymmig

  Use a new CD and this simple and free program to burn your ISO file and create your bootable CD:

  http://www.ImgBurn.com/

  When you install ImgBurn, DO NOT install the Ask toolbar.

  Here are some instructions for ImgBurn:

  http://Forum.ImgBurn.com/index.php?showtopic=61

  It would be a good idea to test your bootable CD on a computer running.

  You may need to adjust the computer BIOS settings to use the CD-ROM drive as the first device to boot instead of the hard drive.  These adjustments are made before Windows tries to load.  If you miss it, you will need to restart the system again.

  When you start on the CD, follow the instructions:

  Press any key to boot from CD...

  Installing Windows... going to pronounce.

  Press 'R' to enter the Recovery Console.

  Select the installation that you want to access (usually 1: C:\WINDOWS)

  You may be asked to enter the password (usually empty).

  You should be in the folder C:\WINDOWS.  It's the same as the

  C:\Windows folder that you see in Solution Explorer.

  The Recovery Console allows base as file commands: copy, rename, replace, delete, chkdsk, fixboot, fixmbr, cd, etc.

  For a list of the commands in the Recovery Console, type help at the prompt of commands or read on here XP Recovery Console:

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/recovery_console_cmds.mspx?mfr=true

  After replacing the file, remove the CD and type 'exit' to leave the RC and restart the computer.

  You have not to set the BIOS to boot the disk HARD since the CD won't be.

• SRA order "matrices of discovery has not not" adv0408 file not found in VMware Site Recovery Manager.

  Hi all

  Can we add several table managers at sites in VMware SRM?

  How to record several managers of the group a table copy in SRA?

  "When I try to add new array manager of second table at one site I get the error message" SRA order "matrices of discovery has not not" adv0408 file not found in VMware Site recovery manager.

  Versions: VMware SRM 5.5

  Cruiser storage: Fujitsu Eternus SF v16.1, SRA 2.3

  Thanks in advance,

  RAMU Reddy

  [email protected]

  Thanks Stefan,

  I contacted my storage team. It was with License Manager (ACM) advanced copy number. After license ACM registry in SRA Database of SRM server, everything was fine and I was able to protect all remaining VM.

  Best regards

  RAMU Reddy

• EXEC file not found OCX, virtual, or low memory, connection has expired in Web sites

  Original title: frustrated Surfer

  Get "OCX file not found Exec" and every day I have ASUS virtual memory low or out. Scroll often does not and most of the time 'egg timer' turning, so slow sometimes websites Time out until I'm done. PLEASE HELP, or it's time for the big trash can in the sky? Lap top is more than 10 years old now.

  Hey,.

  It would help if you could answer these questions in order to solve the problem.

  -What version of Windows you are using on the laptop?

  -When exactly you get the error "Exec of OCX file not found '? It is when you start the computer or by accessing any program?

  -How did the laptop connected to the router? Is it wireless or wired?

  -What anti-virus software is installed on the computer? You have scanned the computer?

  -Remember to make changes on the computer? Updates/programs installed?

  Try these steps and let us know if they help.

  a. for the error message "exec OCX file not found", put the computer in start state in minimum mode and know what software is causing this error message.

  http://support.Microsoft.com/kb/331796

  Note: Once done troubleshooting, put the computer to normal mode according to the steps in "how to regain a normal Windows startup mode.

  b. increase the size of the virtual memory according to the steps in http://windows.microsoft.com/en-in/windows7/change-the-size-of-virtual-memory . Restart the computer so that the changes are applied.

  Note: the steps apply to Windows 7 and Windows Vista.

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/sysdm_advancd_perform_change_vmpagefile.mspx?mfr=true (Windows XP)

  C. follow the steps in http://support.microsoft.com/kb/936211 and check if you have full connectivity when you access Web sites. Also, download and install the latest drivers from the laptop manufacturer's Web site network.

• Error file not found in Temp. Firefox does not start

  When I try to start Firefox (Windows 8.1 desktop computer) I get a full white screen with only the following error message:

  File not found
  Firefox can't find the file at / c; /Users/ username/AppData/Local/Temp/name of file (more than fifty characters long, all the numbers and letters without anything that looks like a real word and ends in /BGAW05 .htm).

  It of only a button to Try Again that never works and some directions to verify the name of the error file, or check if the file has been moved, renamed or deleted. I check to see if the file is no where on C: and it doesn't. It is there no file in Temp even remotely close to that name. I run Firefox with several tabs that are registered and come back when I restart Firefox. So maybe this file in Temp was associated with a deleted tab.

  As I said, this error message comes up full screen, covering the taskbar and not reduce it, restore, close buttons, as if I was running in mode Metro, I never do and will never do.

  Because of this error I can not even start Firefox now, so I had to become a user of Internet Explorer.

  How can I get Firefox to stop looking for this file?

  Any help on this will be greatly appreciated. Thank you.

  I found a solution to my problem. Looking in my info on solving computer problems, I noticed that some problems can be resolved by the administrator. I tried with Firefox and it worked. The only damage was that I lost the current tabs. But Firefox seems to work fine otherwise.

• I can't access some websites using Firefox. For my own site, I get "file not found". My Yahoo downloads in the form of text. No problems with browsers IE or Chrome

  I can't access some websites using Firefox. Pages say "File not found" or in the case of Yahoo and Facebook, they resemble the on-screen text files. No problems with my computer and it is not the case with my browsers IE and Chrome. Already deleted and reinstalled Firefox and it has not solved the problem

  You can also do a check of malware with some digitization programs of malicious software on the Windows computer.
  
  Please scan with all programs, because each program detects a different malicious program.
  
  All of these programs have free versions.

  Make sure that you update each program to get the latest version of their databases before scanning.

  • Malwarebytes' Anti-Malware:
    http://www.Malwarebytes.org/MBAM.php
  • AdwCleaner:
    http://www.bleepingcomputer.com/download/adwcleaner/
    http://www.Softpedia.com/get/antivirus/removal-tools/AdwCleaner.shtml
  • SuperAntispyware:
    http://www.SUPERAntiSpyware.com/
  • Microsoft security scanner:
    http://www.Microsoft.com/security/scanner/en-us/default.aspx
  • Windows Defender: Home Page:
    http://www.Microsoft.com/Windows/products/winfamily/Defender/default.mspx
  • Spybot Search & Destroy:
    http://www.safer-networking.org/en/index.html
  • Kasperky free Security Scan:
    http://www.Kaspersky.com/security-scan

  Alternatively, you can write a check for an infection rootkit TDSSKiller.

  • Utility anti-rootkit TDSSKiller:
    http://support.Kaspersky.com/5350?El=88446

  See also:

  • "Spyware on Windows": http://kb.mozillazine.org/Popups_not_blocked

• Why magnets of all return sites suddenly message "file not found".

  I use Firefox 26.0 on Windows 7. Until yesterday, by clicking on an icon of the magnet has triggered a response by utorrent. Today, December 25, 2013, doing the same thing in the same way on any magnet on any site icon gives the message "file not found" instead of doing what he did before. No changes to Firefox. Use of IE, get the desired result, so it seems not to be a problem of utorrent. What do you recommend?

  Hello

  I found this old article, see if that helps you:
  https://support.Mozilla.org/PT-BR/questions/930045

• LoadPanel fails with error-94 file not found code unless I am in debug mode

  I've written a dll that has a number of panels in a .uir file.

  When I have it, debug using "debug SeqEdit.exe", everything works fine.

  But, if I just use "run SeqEdit.exe" (without debugging and using the same sequence file, I get the error message:)

  "Error in the call to LoadPanel.

  Handle of parent of Panel: 0,

  The IUR filename: HiPot.uir.

  Resource Panel ID: 4.

  Error code:-94

  File not found. "

  The IUR file is always in the same place, the only difference is that I do not use the debug option.

  It's probably something simple I've forgotten?

  You should not use LoadPanelEx in this case?

• Error 7 Build Error - file not found

  I am trying to build my software on another computer on the network. I am able to access the directory that I install and the program is not showing generation errors (all VI are not broken). This error only occurs when building. Any suggestion would be great.

  Thank you

  Nate

  The Build failed

  Possible reasons:

  A VI included or one of its dependencies does not exist. Open all the called start/exported/dynamically screws, recompile them (Ctrl + Shift + click the run arrow) and keep them to update their dependencies.

  \\PAINESTORAGE\Engineering\Test & Software\AutoTest Software\Current Version\AutoTest of manufacturing...

  Extended details:

  Visit ni.com/ask support request page to learn more about the resolution of this problem. Use the following as a reference:

  Error 7 is is produced at ABAPI Dist report read link Info Error.vi-> ABAPI Dist Cmp parameters of disk Hier.vi-> ABAPI get File2.vi settings-> EBEP_Invoke_Build_Engine.vi-> EBUIP_Build_Invoke.vi-> EBUIP_Build_Rule_Editor.vi-> EBUIP_Item_OnDoProperties.vi-> EBUIP_Item_OnDoProperties.vi.ProxyCaller

  Possible reasons:

  LabVIEW: File not found. The file may have been moved or deleted, or the path to the file would be incorrectly formatted for the operating system. For example, use- as Windows path separators: on Mac OS, and Linux. Check that the path is correct using the command prompt or file Explorer.

  =========================

  NOR-488: There is no Board of Directors.

  Problem has been solved-need to re - compile all VI and to link some missing files.

• find a & quot; file not found & quot; error in a sub vi

  I have a vi that includes about two layers of void / vi.  Various data sup read files VI.  When I run the main vi, I get a file not found error, but the error message does not identify the file or the vi sub in which the error occurs.  How can Shor of manually switch each vi, I find the source of the error?

  You can also try to look for the file function that generated the error. LabVIEW has a search utility to look for screws/features in your hierarchy.

• "File not found" message while trying to download games.

  Original title: downloaded games on this computer

  Whenever I have to download a new game, I get the message "file not found". Games Download fine on my other computer, but I would like to be able to use this computer also because of the convenience of not having moved.

  Hi buzzyh51,
   
  a. what operating system is installed on your computer?
   
  b. are you referring to the Games downloaded from a specific Web site?
   
  c. other computer also has the same operating system?
   
  d. get you any specific error and the error code?
   
  e. is the relevant issue in a particular game?
  f. What is the size of the file when it is downloaded?
   
  In the meantime, follow the steps below.
   
  Method 1:
   
  Temporarily disable any security software and then try to install the game, follow the steps mentioned below

  
  http://Windows.Microsoft.com/en-us/Windows7/turn-Windows-Firewall-on-or-off

   

  http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software

  
  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.
   
  Method 2:
   
  Turn off the User Account Control (UAC) and then try to install the games.

  Access this link to turn off UAC: http://windows.microsoft.com/en-US/windows7/Turn-User-Account-Control-on-or-off

   
  Note: User Account Control (UAC) can help prevent your computer from unauthorized changes. UAC notifies you when changes will be made to your computer that require administrator-level permissions. These types of changes can affect the security of your computer or can affect settings for other people who use the computer. We recommend that you leave UAC to help your computer course.
   
  Method 3:
   
  Put your machine in a clean boot State and try to install the game and check what is happening.
   
  Response with status.
   
  Aziz Nadeem - Microsoft Support

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• Try to install the downloaded drivers when comes up with the error "file not found".

  Downloaded the drivers Vista for the HP Photosmart premium C410b and installation of hen comes up with the following error message: file not found

  C:/program files/hp C1164EDO-EF08-4B0B-8085-3BDSEAAEFD8D} \gup\at. Any ideas?

  Hi daddums1958,

  Try using the brush included in the CD or download.

  Of the Original installation CD:

  1. Insert the CD in the drive and then cancel Setup

  2. open my computer and click right then on the CD from the drive and select open

  3 open the Util folder

  4 open the CCC folder

  5. run the L4uninstall.exe

  6. once the uninstall is complete, restart the computer

  7 run the Accessories\ System Tools Disk Cleanup

  8. download and install the latest version of Adobe flash player

  http://www.Adobe.com/support/flashplayer/downloads.html

  9 download drivers and full software features

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=MP-84595-1&CC=US&DLC=en&LC=en&os=2093&Product=4186830&sw_lang=

  10. run the download to reinstall the printer

  If the software has been downloaded and extracted to your system:

  1. type % temp % in the field of race

  2. Locate and open the folder starting with 7z (example: 7zS2356)

  3 open the Util folder

  4 open the CCC folder

  5. run the L4uninstall.exe

  6. once the uninstall is complete, restart the computer

  7 run the Accessories\ System Tools Disk Cleanup

  8. download and install the latest version of Adobe flash player

  http://www.Adobe.com/support/flashplayer/downloads.html

  9 download drivers and full software features

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=MP-84595-1&CC=US&DLC=en&LC=en&os=2093&Product=4186830&sw_lang=

  10. run the download to reinstall the printer

• Windows Media Player 'file not found '.

  Windows Vista Home Premium with Service pack 2 and countless updates. Am on my own ethernet network, access the internet with what we call now AT & T Yahoo via their DSL service.  The company with which I work stations streaming of audio files that are accessed by using Windows Media Player. Windows XP users just go on the company's website and click on the appropriate button to listen to the file.

  When I do the same, Windows Media Player opens, I give "file not found" instead of audio. I can 'see' the file name, right click on it and see its properties (size 0, no media acess etc.) so "not found" seems to be the wrong term. The file is there, but I can't access it.

  Sharing and discovery in network and sharing Center seems to be the problem. The six options, all are "on" except the last, "media sharing." It is 'Off '.  And while I can change the first five options on and outside, not so "media sharing."  Instead of turn it on, I get this message: "when media sharing is on, people and devices on the network can access shared music, photos and videos on this computer and this computer can find these types of files shared on the network.

  And that is, of course, exactly what I'm trying to do.  What should I do to actually enable media sharing? I understand that sharing has its risks, and my goal is to get access to these audio files continuously to be able to listen to them online or download it to my library to access more specific only later.

  Any suggestions for someone who has had this problem and found his resolution would be most appreciated. Thanks in advance. Hugh

  Hi hughMarch,

  If you click on the link on the Web site and the file is not found, the problem is with the site. You must contact the assistance Web site.

  Implementation of readers multimedia network sharing will not change that.

• I'm running Windows SP2 of Visa and get the following message is displayed at startup: "sasnative32 file not found Autocheck ignored."

  sasnative32 not found

  I'm running Windows SP2 of Visa and get the following message is displayed at startup:

  'sasnative32 file not found that autocheck ignored. '

  I found this message in the registry and deleted but it keeps reappearing.

  It does not seem to cause operational problems, but I want to fix.  Any suggestions?

  The BootExecute key should contain autocheck autochk *. This measure of Chkdsk to run at startup.

  You have all Tune Up or optimization programs installed? It is possible, it is distributed with a different brand.

  You can determine what is written in the registry key by using the Process Monitor program

  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645

  If you have not used before, there is an introduction to use it here:

  Windows Sysinternals Primer: Process Explorer, Process Monitor and more. Tech· Ed 2010 North America | Channel 9

  If the value has been restored in the register at the time wherever you can connect, you will need to use logging to start. This can significantly slow down the boot.

  You may be able to determine what is responsible for disabling the departure of items using msconfig.

  http://support.Microsoft.com/kb/929135

• Cannot install paintnet 3.5. It gives an error "system of e/s file not found exceptions could not load file."

  Original title: uninstalled paintnet3.5 now impossible to reinstall download

  "downloaded the file and open it to install gives this error :-systemi/o file not found exceptions could not load file or Assembly of base of the version3.0.0.0 culture = neutral public key token = 31bf3856ad364e35' or one of its dependencies, the system cannot find specified file base name of the 3.0.0.0 - batch version of gibberish between - then" AVT Assembly binding logging is disabled to allow to link failure check the registry value (hklm\software\microsoft\fusion\enablelog (c word) 1 IAM onwindows vista service pack2 version6 and ihavent a clue unless something has been lost in my recent wave of attacks of malware bullguard - computer reports now clean-i do not know how to access the files of basic trends are not listed as installed programs

  Hi Bernie, 78,.
   
  I suggest that you follow these steps and check if it helps.
   
  Step 1:
   
  Right-click on the setup.exe file and run as administrator and check.
   
  Step 2:
   
  I suggest that make you the SFC scan on your machine like a system file is damaged or missing. Scan SFC repairs and tries to retrieve system files.
   
  Step 3:
   
  I am not quite sure if the malware is flushed out of your system. I wish that you run a scan complete of your security again software or run a line scan using the link below.
  http://www.Microsoft.com/security/malwareremove/default.aspx
   
  Aziz Nadeem - Microsoft Support

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]