Can not connect to computer after changing passwords

Similar Questions

• Can not connect to vcenter after reboot

  Hello VMware,

  I can not connect to vcenter after reboot with the error «Failed to connect to the Vmware research service»

  

  I tried to follow below doc but no help.

  http://www.myvmwareblog.com/2012/11/28/lookupservicesdk-SSL-certificate-verification-failed/

  I tried to play with the Vcenter screen underneath, but no luck.

  
  

  To resolve this problem, replace the VCSA IP with hostname VCSA in the search service configuration file, ls_url.txt file.

  To replace the VCSA IP address with the host VCSA name in the ls_url.txt file:

  1. Connect to the VCSA via ssh under the root user
  2. Go to the directory/etc/vmware-sso using the command:

     CD/etc/vmware-sso

  3. Make a backup copy of the file ls_url.txt using the command:

     CP ls_url.txt ls_url.txt.bak

  4. Open the file ls_url.txt using a text editor
  5. Replace the VCSA IP address with the host name of the VCSA. For example:

     https:// Lookupservice/XXXXXXXXXX/sdk

     Where XXXXXX is the host name of the VCSA.

     Note: It is usually the host name of the domain the VCSA FULL name. Make sure it matches the common name (CN) in the certificate name.

  6. Restart the VCSA services by running the command:

     restart the /etc/init.d/VMware-vpxd
     restart the /etc/init.d/VMware-SSO
     restart the /etc/init.d/VMware-InventoryService

     Or

     Restart the VCSA.

  Alternatively, you can use this workaround to regenerate the certificates for the vCenter Server Appliance.To to regenerate the certificates for the vCenter Server Appliance:

  1. Temporarily change the IP address of the vCenter Server Appliance to a different IP address, not used
  2. Restart the vCenter Server Appliance
  3. Change the IP address of the vCenter Server Appliance to the originating IP address
  4. Restart the vCenter Server Appliance
  5. Connect to vCenter Server Appliance, https://vcenterserveripmanagement Web page: 5480
  6. Click the Administration tab, and then select Yes to certificate enabled regeneration
  7. Click send to save the changes
  8. Restart the vCenter Server Appliance

• I can not connect. There is no password or e-mail inbox. Nothing

  I can not connect. Just blue screen wth the button to restart or swith to the bottom of my laptop. No password, no e-mail, no photo area. How can I get?

  I think that I disabled it somehow a software which help connect you. Help, please.

  You can use the power button to enter safe mode and restore the last backup checkpoint.  Here's how (see option on this page#1).

• Can not connect to laptop with windows password 8 after update

  Have a new laptop (ASUS) with windows 8. The laptop using my live account from microsoft for the login screen. After that the first windows update, I can not log on the laptop and had to have Best Buy reload windows 8 and start over. There is no way to unlock this processor without the password. This happened once more. I can log in to my account windowslive using a different processor, but cannot unlock the password of login by using the same password, as I did before the update. Other ideas that take over to Best Buy and getting the laptop with windows 7?

  Hi WillieReed,
  Thanks for posting on the Microsoft community!
  Do you see the error codes/messages when you try to connect?

  Here are some solutions: -.
   
  1. ensure that Microsoft account services are running, go to the page of the service status.

  https://status.live.com/

  2 reset your password from Microsoft
  To reset your password, or get help with a password and other problems with your Microsoft account, go to reset your password.

  https://account.live.com/password/reset

  3. check the length of your password
  Make sure that your Microsoft account password length is not more than 16 characters. The current maximum limit is clearly indicated during your initial account registration Microsoft upward, but may not be clear during a password change. The password change process to enter more than 16 characters, but your account will not accept anything more than 16 characters. You can change your password from Microsoft by clicking on change your password. (You may need to connect to your Microsoft account before you can access this Web page.)

  https://account.live.com/ChangePassword.aspx

  4. get on your Microsoft account to check if its been blocked or pirate by following the link below
  http://Windows.Microsoft.com/en-us/Windows-8/get-back-blocked-hacked-account

   

  5. you can also follow the link below if you have forgotten your Windows password
  http://Windows.Microsoft.com/en-us/Windows-8/forgot-Windows-password

   

  Hope this solves the problem, you can write back to us and we will be happy to help you further.

• Need to change the connection information for Windows 8 - can not connect to computer because associate login hotmail account has been deleted

  Long story short - the email address associated with my Windows 8, log in to my desktop computer has been deleted and now I can't connect to my computer at all.  Is it possible to access my computer without having to take my computer to a technician to reinstall Windows 8?  Any help is appreciated, thanks!

  Hello

  I understand that you have removed the Hotmail account and Windows does not let you connect as a result of this deletion. Unfortunately, there is no other way to enter to account without using the password (if the account is active).

  You can see the Microsoft Account self-help recovery article and check.

  Recover your account

  If no help, I would recommend that you post your query in Windows Live ID support for assistance.

• forget password and I can not connect wifi to reset the password

  Hello

  I forgot my password after changing to connect to my computer and I can't connected to wifi to reset the password

  I need to lose my everything on my Imac with nothing

  What should I do?

  An apple article is here: change or reset the password of a user account from OS X - Apple support

• WPA - PSK, BEFW11SA, can not connect the computer to the network

  When I enable security wireless mode WPS Pre - Shared Key, algorithm, TKIP, a 9-character key and key group og renewal 3600 and then configure the computer, the computer is not connected to internet, even if the connection is recognized.

  When I created my Linksys BEFW11SA with "Wireless security" disabled, my computer has no problem connecting to the internet.

  Somehow, I'm sure that the problem is related to the configuration of the WPS, but I don't know what to do.

  I run XP sp 3. Router firmware version is 1.50.11, which I think is the last update (1.50.13 in mentioned on the home page of Linksys, but the corresponding version notes give the 1.50.11 version) the router does not have common WPS - PSK option with XP, so I couldn't try to use WPA2 or other options.

  Can someone please help?

  / JanB

  You tried the WPA key on your router and still it dosent work, you tried to secure your network using the WEP password. If it isn't then you can try settings WEP key password on your router and check if you are getting connected to your network on your laptop or not.

  Open an Internet Explorer browser on your computer (desktop) wired page. In the address bar type - 192.168.1.1 and press ENTER... Let the empty user name & password use admin lowercase...
  For wireless settings, follow these steps: -.
  Click on the Wireless tab

  For wireless security: -.
  Click the sub-tab under wireless > Wireless Security...
  Change the mode of WEP wireless security, encryption must be 64-bit. Let the empty password, do not type in anything... Under type of WEP Key 1 in all 10 numbers please (numbers only and no mailbox for example: your 10-digit phone number) and click on save settings...
  Please note the 1 WEP key as it comes to the security key for the wireless network...

  Now let's see if you can locate your wireless network and try to connect...

• Can not connect to computer

  When I try to connect to my computer, my password does not work and it says user profile cannot be loaded. What does that mean? He just started this yesterday. I can't change my password because I do not have a disk. An advise please?

  Hello

  You can try the following.

  Shut down the laptop.  Tap away at f8 that you start the laptop to enter the Windows Recovery Console.  Use the arrow keys to select Safe mode and press ENTER.  If windows will load in this mode, on the Start Menu, click principally made programs, click Accessories, click System Tools and run the system restore.  Choose a restore point at least 24 hours prior to the issue of logon and then proceed to the restoration.  When you are finished, Windows will restart as normal in order to check if you can now connect correctly.

  Another option if the above does not help is as follows.

  Shut down the laptop.  Tap away at f8 that you start the laptop to enter the Windows Recovery Console.  Use the arrow keys to select "Start using last good known Configuration" and press ENTER.

  Kind regards

  DP - K

• Portege R700 - can not connect to the help of password and no prompt fingerprint

  Hello

  I am facing a weird question. My R700 - 12 k is up-to-date with the latest drivers and running Windows 7 64 bit. I created fingerprint for the windows logon. Everything seems to be working well but when I put the computer to sleep and wake him up he has no message to connect with fingerprints and it is impossible to connect using password at all because it seems that disables - I can fill in the password but I can not click-> icon and also by pressing the Enter key have no effect. Seems that some utilities Toshiba does not work properly. Any suggestions?

  Thank you in advance,

  Jan

  Are you using the Toshiba recovery image?
  Have you noticed this behavior from the first day?
  Have you noticed what with stand-by only?

• Can not connect. Try to change the password, but it does not appear in email

  Just try to connect to Thunderbird. It does'nt recognize my login or password. I'm trying to change, Thunderbird said he sent a new to my email. Go to my email and it's not there. What I want ultimately to do is to find a tutorial on how to use my newly installed pgp program. I need something simple that I c a write down and follow so I don't make a mistake. I'm NOT "computer" somehow. EVERYTHING is a struggle for me, so having a "cheat sheet" pgp Protocol is the only way I can think to commit it to memory. Sorry for the long message, do not know another way to get my message across. Thank you, Charles

  You're not in computer science is a little obvious, so forgive me if this comes harder.

  Requesting password resets. If Mozilla, reset you your password for this site most likely like Thunderbird has no password. Or Thunderbird issue passwords or e-mail accounts. Your email provider, however, provide passwords to your e-mail accounts. Can you implement your existing email accounts in Thunderbird and get them to send and receive mail? Without any reference to PGP.

  PGP I suppose is the add-on of enigmail for Thunderbird, which is supported by https://www.enigmail.net/support/ although you will struggle more than a little with it, I think. If you have the WebPg for Mozilla it is supported by https://webpg.org/ here

• Can not connect to BAM after installation (Turkey-weblogic)

  It is maybe wrong place. But I hope someone can help.

  I installed upgrading trial 1 lc 8.2 weblogic/mysql using Turkey/express mode. All the links work fine except the two links BAM. I got error 404 at the beginning. After manually config server BAM after the help documentation at the http://www.adobe.com/go/learn_lc_installWebLogic_82 (page 33), I am able to see the login page of bam workbench. Unfortunately, I'm still not able to connect using the default System/Manager account. Can anyone help?

  what I've done so far:

  * Set bam.properties according to the Guide provided for above Web Logi.

  * Confgigured a new server in the weblogic console instance: BAMServer1

  * Creates a new database in a mysql external (not mysql LC database) and create a new user with all privileges.

  * Set up the data source com.celequest.metadata.metaDatasource to connect to the new database created earlier .
  * Installed BAM according to the Guide provided for the logic of the Web.
  * Set up the BAM username and password by default @ [home page >]
  [Services > LiveCycle Process Management ES > server settings > Configuration BAM settings].
  Username: System
  Password: Manager
  * Restarted both LC Server and the BAM Server
  * OS: Windows XP
  * Installation LC: weblogic turnkey
  * LC Version: 8.2.1.2

  my data source configuration:

  Name: IDP_DS
  JNDI name: IDP_DS
  Goals: LCServer1, BAMServer1
  

  Name: com.celequest.metadata.metaDatasource
  JNDI name: com.celequest.metadata.metaDatasource
  Goals: BAMServer1

  LCServer1 is the instance of LC
  BAMServer1 is the instance BAM

  Am I missing something?

  (someone has experienced this same problem with google group LC Developer: http://groups.google.com/group/livecycle/browse_thread/thread/5f7bf667918461de?pli=1)

  Thank you!!!

  Any error in the app server log file when you start LiveCycle?

  Jasmine

• I can not connect. I went to passwords saved and copied but does not work

  I usually just have to click on the Mozilla desktop icon to connect, but today it says connection fails and even if I went to saved passwords they do not seem to work.

  The usual cause is a bad anti virus update, or lack of one in Thunderbird updates.

  1 reset
  2. check that your anti-virus firewall component allows Thunderbird
  3. check with your service provider that their mail server is working.
  4. to diagnose problems with Thunderbird, try one of the following:

  • Restart Thunderbird with disabled modules (Thunderbird Safe Mode). On the Help menu, click "restart with disabled modules. If Thunderbird works as usual, there is an add-on or theme interfere with normal operations. You will need to reactivate the modules one at a time until you locate the offender.
  • Restart the operating system in safe mode with network. This loads only the basics needed to start your computer while allowing Internet access. Click on your operating system for instructions on how to start in safe mode: Windows 8, Windows 7, Windows Vista, Windows XP, OSX

  If the safe mode for the operating system to resolve the problem, there are other software on your computer that is causing problems. The possibilities include but not limited to: AV scanning, virus/malware, background downloads such as updates of the program.

• Computer says 4500 G510n is offline, the printer says it can not connect to computer

  I use a Mac OS X 10.5. The printer is recognized as an option for printing on the computer and the printer is properly connected to the wireless network, but the computer will not be printed because he says the printer is offline. Can I have help step by step? Thank you.

  What router?  Have reset you the printing system? :
  
  -Sys Prefs, printing and fax
  -Right (control) click inside the box that lists your printers and select Reset Printing System.
  WARNING - This will remove ALL your printers!
  -Select the sign + to add again. Search for the printer, select it, and wait until the button 'Add' becomes available. Until it clicks.

• Can not reinstall the software after change of hard disk

  My old hard drive failed on me last week, so I had to buy a new one. I want to reinstall my suite adobe CS5.5, but the computer just spits the disc after a few minuets. What I am doing wrong?

  I have a mac book pro, mid-2009, with Snow leopard OS x 10.6.8

  You can work around the disc and download the free trial from the page linked below.  Then use your serial number to activate the software to use fully.

  Don't forget to follow the steps described in the Note: very important article Instructions on the pages to download to this site or the download may not work properly.

  CS5.5: http://prodesigntools.com/adobe-cs5-5-direct-download-links.html

  If it works, then there may be a problem with the configuration of your hard drive.

• servers managed not able to restart after changing password in console

  IM doin the following the steps, I'm doing something wrong?
  all the 1) stop managed servers
  (2) change pwd in the administration console
  file boot.properties edit 3) with new pwd in server admin
  copy 4) these boot file on each managed server
  (5) now restart server admin. (able to do successfully)
  (6) not able to restart the managed servers (im getting the following error.
  Can any help me please very urgent?
  
  
  < critical > < WebLogicServer > < BEA-000386 > < server subsystem failed. Reason: weblogic.security.SecurityInitializationException: authentication refused: Boot identity not valid; The user name and/or password in the identity of startup file (boot.properties) is not valid. The identity of start-up may have changed since the identity of boot file was created. Please edit and update the identity file to start with the correct values of username and password. The first time that the identity of starting update file is used to start the server, these new values are encrypted.
  weblogic.security.SecurityInitializationException: authentication refused: Boot identity not valid; The user name and/or password in the identity of startup file (boot.properties) is not valid. The identity of start-up may have changed since the identity of boot file was created. Please edit and update the identity file to start with the correct values of username and password. The first time that the identity of starting update file is used to start the server, these new values are encrypted.
  at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.doBootAuthorization (unknown Source)
  at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initialize (unknown Source)
  at weblogic.security.service.SecurityServiceManager.initialize (unknown Source)
  at weblogic.security.SecurityService.start(SecurityService.java:141)
  at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
  Truncated. check the log file full stacktrace
  
  < Opinion > < WebLogicServer > < BEA-000365 > < changed failed State Server >

  Hello

  (* 1) to export the data from the user on the server, I need to create a specific directory to save this data in the server messagerie.*
  Yes... You can give any path of directory existing in the AdminConsole export Page... Any directory in your file system.

  (* 2) y at - it another way to not export or import data? *
  It is the only way to prevent the loss of data... There are other ways to do it without using the administration Console as WLST using or using JMX, you can export data, but all of these techniques will do exactly the same thing... The AdminConsole is the best way to do it.

  .
  .
  Thank you
  Jay SenSharma
  http://middlewaremagic.com/WebLogic/ (Middleware Magic Is Here)