Eva 6100

Similar Questions

• How to balance IO SAN controller between my ESX host?

  Hello good community.

  Question about SAN controller i/o balancing between my ESX hosts.

  I've identified the controller A and B controller on my SAN, HP EVA 6100.

  The controller has 50001FE1 500E1208

  Controller B 50001FE1 500E120C

  But when I go to "Storage adapters", then "Manage paths" by vmhba and I'm lost.  Policy of LB is fixed.    Then I see:

  vmhba1:0:6 50:00:1f:e1:50:0e:12:08 * status: active, preferred

  vmhba1:1:6 50:00:1f:e1:50:0e:12:0 c

  vmhba2:0:6 50:00:1f:e1:50:0e:12:09

  vmhba2:1:6 50:00:1f:e1:50:0e:12:0 d

  If the first two on my controllers, don't know about the bottom two WWWN however, can someone who knows HP EVA help here.

  Also, I am very confused regarding mirrored ports and the need to be cautious when balancing the way between the controller.

  Which would be great if someone could give me a few white read books on it, the same and also fair knowledge base articles explain how to approach the above and examine the virtual machines as well.

  Not too big so... just small forum post I raised here... It will be useful someone help to get a dialogue going.

  What I do with my EVA, is having different LUNs (Datastores) manually selected a path preferred in command mode.  For example LUN 1,3,5,7 are on path then that lun 2,4,6,8 are set on Channel B.  This means that all your LUNS are also responsible.  On the ESX side each of my machines has 2 HBAs each with 2 paths that it looks like your Setup.  Here's what I think looks like load-balanced:

  ESX01-

  vmhba1:0:6 50:00:1f:e1:50:0e:12:08 - LUN 1.2

  vmhba1:1:6 50:00:1f:e1:50:0e:12:0 c - LUN 3.4

  vmhba2:0:6 50:00:1f:e1:50:0e:12:09 - MON 5, 6

  vmhba2:1:6 50:00:1f:e1:50:0e:12:0 d - MON 7, 8

  ESX02-

  vmhba1:0:6 50:00:1f:e1:50:0e:12:08 - MON 5, 6

  vmhba1:1:6 50:00:1f:e1:50:0e:12:0 c - MON 7, 8

  vmhba2:0:6 50:00:1f:e1:50:0e:12:09 - LUN 1.2

  vmhba2:1:6 50:00:1f:e1:50:0e:12:0 d - LUN 3.4

  It might not even be necessary have a configuration of blancing of load complicated if you produce not enough IO to saturate your current configuration.  You can just keep it like this:

  ESX01-

  vmhba1:0:6 50:00:1f:e1:50:0e:12:08 - LUN 1.2

  vmhba1:1:6 50:00:1f:e1:50:0e:12:0 c - LUN 3.4

  vmhba2:0:6 50:00:1f:e1:50:0e:12:09 - MON 5, 6

  vmhba2:1:6 50:00:1f:e1:50:0e:12:0 d - MON 7, 8

  ESX02-

  vmhba1:0:6 50:00:1f:e1:50:0e:12:08 - LUN 1.2

  vmhba1:1:6 50:00:1f:e1:50:0e:12:0 c - LUN 3.4

  vmhba2:0:6 50:00:1f:e1:50:0e:12:09 - MON 5, 6

  vmhba2:1:6 50:00:1f:e1:50:0e:12:0 d - MON 7, 8

  Hope this helps

• HP eva data recovery 6100

  Hello
  is it possible to restore the data of EVA after deletion of the virtual disk?

  Hello

  You should post this in the forum of the community of the business . It is the instance of consumer product.

• Where to buy drive HARD MK4019GAX for Satellite Pro 6100?

  Hi - I need a new hard drive for my satellite pro 6100, MK4019GAX part number. I have searched online but have drawn a blank. Any help would be appreciated. Thanks, Roy

  All devices, you can order from the Toshiba service partner in your country.
  As far as I know the MK4019GAX is a 40 GB ATA-100 HARD drive.
  You can also use an another 2.5 40 GB HDD.

• Re: What position the caddy a Satellite Pro 6100 use?

  I recently acquired one of the old machines out there I have an I was wondering where can I get the internal carriages of?
  Second, this model uses a hard drive spindle adapter?

  Thanks in advance!

  This SP is very, very old model laptop so I put t think you can order somewhere try to check eBay. You will find lots of different parts for old models of laptops. In the worst case buy a defective SP 6100 and use it for parts.
  > Secondly, this model uses a hard drive spindle adapter?
  I n t think so, but you can check it yourself. You can remove very easy HDD. HARD drive cover is fixed with a screw. When you remove the HARD drive cover, pull the disk block HARD on vinyl of the HARD drive battery handle.

• Satellite Pro 6100 - battery acting very strange.

  As mentioned in the title, my laptop battery is very strange.

  The symptoms are:

  When the battery is flat after only 7-10 minutes he turns not, however if the battery is removed and placed in the laptop, the laptop will start as it has never happened.
  Not only that, but the bonus after the first can indefinitely until this that loaded into an OS and immediately after starting start the laptop stops due to an apparent lack of power, when there is power always, enough to do the same thing again. Also, the battery can still start even after being just in a freezer.

  This reacondioned back to normal battery or is this safe to use battery?
  Thanks in advance!

  Hello

  I guess that your battery is old like machines of this Satellite Pro 6100 and maybe it can't be charged more. In this case, your battery should be replaced.

  But even if the battery is faulty, you should be able to use the device connected to the power adapter.
  So even if the battery is removed, you could power the unit with the mains.

• Signal not detected on Satellite Pro 6100 wireless

  I have two laptops Satellite Pro 6100, two of them are configured to automatically connect to our local wireless router which they both started.
  A computer is used by myself by my wife; bookmarks, email accounts and so on are different on every computer/hard drive.

  I have problems with one of the computers (mine) - the usual problem with multispindle connectors on the video boards and feeding, then I tried to use "his" computer with 'ma' machine's hard drive.

  His machine does not recognize our LAN with my hard drive installed. He came up with a new network found, but not a wireless network. Also, with this machine and my hard drive installed, can't the machine to search for wireless LANs, the icon does not appear. The switch is turned on for wireless signals and it works very well with his hard drive in it. The network is protected, and the two machines have the same id in them for connection which work fine in the original engine.

  I don't really understand this condition. Something in the bios? Something on my hard drive that is not recognized by the computer? the wrong phase of the Moon?
  Suggestions how to trouble shoot and fix this?

  Both machines are XP Pro on them, latest updates.

  Hello

  Also AFAIK, Satellite Pro 6100 was equipped with different Wlan cards so if use different HDD with different driver then the Wlan card could not be detected by Windows XP.

  Check if the wireless adapter is listed in the Device Manager and recognized correctly.

• Satellite Pro 6100 - how to change the date and time in the BIOS

  Hello

  I received a satellite pro 6100 that had not been used for some time. Windows does not work then he reinstalled with the good drive.

  When I try and windows 'enable', I get the error 32777 and the laptop is unable to connect with the activation servers that a google leads to believe me that the date and time are incorrect in the bios.

  I know that Press esc to access the bios but there is no option to change the date and time in there. I put the date / the correct time in windows, but this does not seem to synchronize with the bios. I've updated to the latest version of the bios, but this is not enough.

  How can I change or update the time in the bios?

  Thank you

  Hello

  I doubt this time and date setting BIOS does affect Windows activation time Windows doesn t affect it in my opinion. There must be another reason for this problem.
  You can activate Windows by phone?

  Normally the date and time in the BIOS can change you if you mark the date or time, and then press on + or - to change this. Sometimes you have to press PageDown/to the top according to the model of BIOS or laptop.
  Usually in the configuration of the BIOS you will find a brief info how changing the values.

  Check this box!

• Satellite Pro 6100 - code beep at startup

  Hi all

  Just picked up a 6100 Pro of the Satellite with a few problems.

  It lights up, he pointed out the HARD drive and I can hear the disk activity. However, the screen remains blank and a single beep can be learned after 20 sec. White screen, as I understand it, is probably the issue of Council power raging in the SP6xxx series. However, the beep I do not understand.

  I know that 2 beeps or 3 beeps is incompatibility of memory but no one knows which denotes the beep?

  Ta

  Hey Buddy,

  To be honest it's not easy to say what the cause of the problem because it could be everything and Satellite Pro 6100 is old enough for laptop.

  You have two memory modules RAM? If so remove a module. Always try a module only at the same time and test it in the slot of RAM A and B. A module is may be defective or a slot.

  If this is not the case, there seems to be a problem with the motherboard or the CPU itself. If you can exchange these things, try it yourself as a repair would be too expensive for this good old classic I think.
  Second hand spare parts you can get it on eBay s worth a try! ;)

• Is it possible to install Windows 7 on Satellite Pro 6100

  Is it possible to install windows 7 on a Toshiba Satellite pro 6100 computer? I am currently using windows XP.

  Thank you.

  Hey Buddy,

  Do you really think on installing Windows 7 over several years old Satellite Pro 6100?

  In my opinion, it won't work because it is too old and not fast enough. Newer operating system that is supported by Toshiba is Windows XP and this should be the best choice for good old classic.

  So just to be satisfied with Windows XP, it's a good choice for older computers! :)

• Satellite Pro 6100 turns off when I connect the power adapter

  Satellite pro 6100 works well up to this I put AC adapter / CC, then turns it self
  Any ideas would be appreciated

  see you soon

  Hello

  You use original Toshiba AC/DC adapter or another?
  What happens if you connect the AC/DC adapter, while the laptop is turned off?

  It s really strange problem, but I think that is s TI associated with AC/DC adapter or the motherboard itself

• Satellite Pro 6100 - I have only a blinking orange light

  I turn it on and normal light happened for a while, then I just get a light orange blinking (6100)

  Hello

  your machine definitely has a hardware problem and must be repaired by an authorized partner. I suggest, if you want to keep your machine to spend money and that your machine working again. To find a servicepartner to your country just follow this link:

  http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/generic_content.jsp?service=EU&ID=ASP_SUPPORT

  Welcome and good luck

• No Satellite Pro 6100 no response from the screen

  Can anyone help?

  My 6100 Pro Satellite lit last night then automatically went into hibernation, despite being connected. Now when I turn it on there is no response from the screen, but if I plug a monitor to the laptop, the screen works (as long as I start in safe mode)

  Can anyone help?

  Hi Simon

  Disconnect all cables from the laptop and remove the battery.
  Wait a moment more (20 min) and reconnect the battery and the AC adapter.
  Then check if the laptop turns on and if the display works fine

  Good luck

• Satellite Pro 6100 - no idea on I need drivers

  Hello
  Well, I brought a Satallite Pro off ebay a few days back but I can't find what I need.
  I don't have any idea what the laptop except a Satallite Pro 6100 1.7 ghz, 512 MB ram mobile P4 CPU graphics card nividia.

  It would be great if I could know what laptop that I use to download the drivers, or at least be done in which I need only one I'd love to be able to change the brightness of the display by using the fn + F5 key and have the screen filling the LCD.

  Thank you.
  Mike.

  Hello

  I put t really understand your problem

  The European driver from Toshiba site provides all the important and necessary drivers for the Satellite Pro 6100.

  I assume you mean on the XP drivers
  Install all.

  In a first step, I recommend the installation of the common Module Chip Set Utility, display driver and then continue with the rest

  If you have installed SP2 please check the "Microsoft Windows XP SP2 update information" because some tools need to be updated.

  concerning

• Satellite Pro 6100: black border to the right of the screen

  After a new installation with windows xp when I star tup I have a black border (1.5 cm) to the right of my screen.
  After the beginning and the end of the screen saver, I have a full screen.
  but when my laptop started again I have this black border again.
  I have a satellite Pro 6100.

  Management information
  System
  Model = laptop
  Manufacturer = TOSHIBA
  Serial number = 0000000000
  UUID = ffffffff-ffff-ffff-ffff-ffffffffffff
  BIOS Version = Version 1.90

  OPERATING SYSTEM
  Caption = Microsoft Windows XP Professional
  Version = 5.1.2600 Service Pack 2

  CENTRAL PROCESSING UNIT
  Index = 1
  Manufacturer = GenuineIntel
  Name = Mobile Intel (r) Pentium (r) 4 - M CPU 1.70 GHz
  Version = model 2 Stepping 7
  Max clock speed = 1694
  Socket designation = uFC - PGA Socket

  Display
  Index = 1
  Horizontal resolution = 1024
  Vertical resolution = 768
  Chip Type =
  The RAM size =

  Very strange problem! Can you please tell us more about this problem? I assume that you have installed the OS on your own. Since when you noticed this weird display problem?

  Have you noticed this immediately after installing the OS (without driver)? Did you install the display driver on Toshiba support page?